Fluke 87 Display Repair The Right Way - Free Instructions
ฝัง
- เผยแพร่เมื่อ 12 มิ.ย. 2024
- Free PDF Download Instructions at https:
multimeterparts.com/blog/fluk...
How to fix the Fluke 87 LCD Display with faded, fading, ghosting, or missing segments on LCD? This works for all Fluke 80 Series Multimeters like the Fluke 83, Fluke 85, Fluke 86, Fluke 87, Fluke 88, Fluke Matco, Kent-Moore, and Fluke Xerox versions. Cleaning the display connectors with rubbing alcohol, or contact cleaner will serve as a quick temporary fix. The best way to fix once and for all long term is to replace the old pink elastomers with the new gray elastomers. Our Display Kits come with step by step photo instructions, gray elastomers, and 60 Day Warranty. That means we'll honor a full refund on returned items within 60 Days if you're not satisfied. We also sell Fluke parts, and quality used test equipment.
Fluke 80 Series replacement elastomeric connectors may be found here: multimeterparts.com/fluke-87-...
Restored my Fluke 83 to perfect working condition. I couldn't be happier with your product.
Installed the repair kit a year ago and it is still going strong.
Retired Electronics technician Larry S in New Jersey
We're glad it helped out, and appreciate your feedback. We're available to help out anytime you need us moving forward. lcdrepair@multimeterparts.com
Great tutorial! BTW , you sound just like Bob Dylan - uncanny!
This kit fixed my light LCD display. Now all segments are nice and dark the way they should be. Time to fix < 10 mins but watch video first. Happy customer highly recommended product.
Thank you for checking us out, and taking the time to share your generous thoughts. We look forward to uploading material in the near future. Don't hesitate to contact us if we may be of assistance to your Fluke/Test Equipment needs. Thanks again!
Fixed the display on my Fluke 83 in just a couple minutes. Great product.
Thank you for your feedback, and we're happy it worked out. Contact us anytime if we may be of assistance moving forward. Thanks Again! lcdrepair@multimeterparts.com
I own a Fluke 79 that had a similar display problem. While it is not identical inside, it is close enough that this video helped me fix it using using a couple of the gray elastomers that Fluke had sent me a few years ago. Your information about the contact cleaning not being necessary and the demo of taking the display apart was just what I needed to help me understand that I wasn't really risking major damage. After years of ghosting displays, the thing now looks like new. Thanks.
Great, and thank you for sharing! Glad it worked out. Contact us anytime moving forward if we may be of assistance to your Fluke meter, or Test Equipment needs. We'll do our best to accommodate. lcdrepairkit.com/contact-us/
Thanks much this 87 lay dead for more than 10 years and you help me bring it back to life, (UP).
Alright! We're glad it worked. 4. Contact us anytime moving forward, and we'll do our best to accommodate. lcdrepairkit.com/contact-us/
Great. Thanks a lot from a happy customer :-)
Thank you for your generous feedback. Contact us anytime if we may be of assistance to your Fluke meter, or Electronic Test Equipment needs. multimeterparts.com/contact/
Purchased the kit of EBay and I had my doubts looking at 2 rubber like strips. Watched the Video and now I get it. Took me all of 3 minutes. Fluke88 is like new again!
Rubber like stripes
Great that it worked out, and thank you for sharing. Contact us anytime moving forward if we may be of assistance. We'll do our best to accommodate. lcdrepairkit.com/contact-us/
Just repaired both my 87 and my 75. At first the new pads in the 75 did not help, lots of segments missing.... I did clean both pc and led contacts (very carefully) with Deoxit D5. I did not take the cover off. I used a miniature brush made from a cut off and crushed end of a tooth pic (squeezed between pliars until "brushy") dipped it in the Deoxit and wiped lightly down in the slot on the pc board. The 75 now works quite well now as does the 87. Thank you very much.
That's great! We're happy it worked out. We look forward to putting up more content in the near future. Don't hesitate to reach out if we may be of assistance moving forward. lcdrepair@multimeterparts.com
I picked a fluke 87 at a yard sale for 4.00 the display wouldn' t work; I changed the battery and ordered the reair kit here installed it and for 24.00 I have a working meter. this worked well Thanks
Thank you for your purchase and generous feedback. We're available to accommodate when you need us moving forward. All the best!
thank you so much
I found one at work someone had thrown out because the display was unreadable. All I did was clean the contacts and your video showed me which direction to put it back together so it was right side up. I now have a working meter. If it quits again I can order your part.
That's great! We've been on hiatus, but we're back now and ready to help if/when you need us. lcdrepairkit.com/
I have a fluke 77iv multimeter,when it's turned on the display is on the same way for all functions,please help.Thanks
When you state it's the same way, you mean the display is on VDC, for example, for all the functions? Is it all zeros? Try taking apart and making sure that the range selection knob is positioned correctly and that all the contacts are clean and in the proper place. I'll try to post a video of the Fluke 77IV, or compatible soon...if I have one. Thanks for reaching out. I hope this helps.
Found this video. Purchased the kit. Meter is like new! It is tricky putting the screen back on.
Thanks for your support. Glad it helped!
Kit no longer available. Contacted Fluke to repair my meter for this issue. No longer servicing the Fluke 87 True RMS, but I could buy a new one from them for nearly $400. I tried to have this repaired back when it started happening back in 1993~1994 timeframe, but they wanted $250 as a "repair fee". I paid $225 for the meter (maybe less). I wasn't happy for sure. :(
I found them for sale on fleabay for under 20, and it has worked no issues
@@spartanreece9908 Maybe I'm blind or have zero idea how to use the old fleabay any longer, but there are no 'screen' or 'kits' or pretty much anything for the Fluke 87.
I guess I continue to take it apart, clean the pads, and move on. Probably the last Fluke I ever buy after their piss-poor customer service with me (and yes, since I bought the meter).
Do you sell the LED backlight replacement? Did you ever sell it? I have the two grey elastomeric parts from you and an LED backlight, but no instructions on how to install the LED backlight replacement. My Fluke is an original 87. Thank you.
We're back from hiatus. Contact us directly and we'll do our best to accommodate your request anytime moving forward. We do have LED Backlights in stock. The original Green ones and the Fluke 80 Series III white ones. For your consideration: multimeterparts.com/contact/
Great video. Would your kit be good for my 8020A?
Let me see what I can find out and will get back to you. Thank you for checking us out!
Thank You !!!!
You're welcome!
Ordered your kit and replaced the elastomeric strips with the new gray ones and the display didn't get any better. I have an old FLUKE 87 meter from when I worked at Xerox. It is probably 40 years old . Is it beyond fixing? By the way the contacts on the PCB are not copper colored; they are dark. I have cleaned them with alcohol, but no difference in the display.
We'd like to help, but need more information. Pictures will be very helpful so we can better diagnose and offer best solution. Thank you for your purchase...now we owe it to you to make it right. Contact us anytime lcdrepair@multimeterparts.com
i have question .i put the leads to connect 9v battery positive to positive negative to negative is no reading.i reverse leads have .554reading on the diode setting test.is normal or short circuit ?
We're back from hiatus. Not sure I'm understanding the setup completely, but I've seen bad batteries give strange readings...even when batteries fresh out of the package. Rare, but it's happened. If you suspect something wrong internal, check for physical signs of damage on the main board PCB. Good luck, and please share the results. Everyone's been waiting over a year to find out. Thanks for your question, and we apologize for the delayed reply. All the best to you.
The elastomer and gold pads can be cleaned with pure ethanol or isopropanol to restore function. No new zebra strips are required.
Thank you for sharing. Yes, this is true; however, there will come a time when the elastomers should be changed. Technically, the fading lcd segments is not due to dirty contacts...it's really due to the elastomers losing their bounce after years of compression. The old pink elastomer life cycles are just about up. When you're looking for replacements, consider our offers. We'll do our best to accommodate. lcdrepairkit.com/contact-us/
Both are true , please study carefully before you handle the problem.
Do you sell the LCD for Fluke 87 Multimeter or do you know of any stores you can sell?
Our best recommendation is to find a reasonably priced used/parts meter and swap out the LCDs. Occasionally, we'll get a parts meter in with a good display. We do have pre-owned units that we part out. For parts requests, please contact us at multimeterparts.com/contact/
Sir, where I can buy new elastomer connectors for fluke 87-v meter? Can you send a link for this?
We apologize for the late reply. We've been on hiatus, but we've updated our links. For your consideration anytime you need us, Contact us directly for discount(s) lcdrepairkit.com/fluke-87v-87-series-v-display-repair-kit/
My Fluke 88 stays at start up screen , with all led's in test mode everything visible
We're back from hiatus. We know it's a little late, but try spraying electronics contact cleaner into and around the range selector switch. If the problem still persists, contact us anytime and we'll do our best to accommodate a solution. multimeterparts.com/contact/
Hello! I got a Fluke 87 Multi Meter I want to purchase from you the LCD and the Rubber connector. I am from Singapore and please let me know what is the price including shipping to Singapore. My Fluke meter the screen is faded badly. Please advise asap. Tan Peter
DUDE.... he stated clearly... in the video... NO ONE makes or has replacement LCDs anymore for this... its discontinued.... your meter is garbage
We're back from hiatus. Contact us directly and we'll do our best to accommodate your request anytime moving forward. We're on a new ecommerce platform, so be sure to contact us and we'll set up a special offer...even if it is too late. for your consideration: lcdrepairkit.com/contact-us/
Ada lcd fluck 73 iii
Link to Free Download Step By Step Instructions: lcdrepairkit.com/fluke-download-instructions/
hI, I am soryy to say you have not clean card and it busbar .
where can i get the display , my fluke 87 V display is gone bad, black botched up display.
Are you looking for a Fluke 87 LCD, or Fluke 87 V LCD? We may have both in stock. Will get back to you. Thanks
Como se llaman esas esponjas negras?
¿Te refieres a los conectores elastoméricos? También se les llama tiras de cebra
So you have any sales outlets in mumbai
We're back from hiatus, and ready to serve. For your consideration, contact us anytime moving forward. We'll accommodate a win win. multimeterparts.com/contact/
Kendala angkanya putus ndak lengkap sempurna
How different is the 27/FM
The main difference is that the Fluke 27/FM elastomers are a different size than what we carry in stock at the moment. Other than that, try cleaning the elastomers with alcohol pads to see if it improves. We'll be uploading new content in the near future, and we'll include the Fluke 27/FM.
A+. Lot's of Brains.
Thank you for your generous feedback.
Is it some glue used to elastomer connection?? Or not use ?? Where we buy elastomer, and lcd fot Hioki 3230 ??
There is no glue used. Sometimes the elastomers will stick to the LCD due to age. It seems like it's glued on, but it's just stuck to the glass. Please text size of your Hioki elastomers to lcdrepair@multimeterparts.com and we'll do our best to accommodate. We've had success trimming elastomers down in size to fit smaller applications. This might be an option for you.
This device costs a fortune here in my country.
A fortune!
They cost a fortune here in USA too. Consequently, thieves steal them.
We're back from hiatus. We'll be uploading content in the near future. Our goal is to offer pre-owned parts and equipment solutions. For your consideration, contact us anytime moving forward, and we'll do our best to accommodate. multimeterparts.com/contact/
@@MultimeterParts ok
Where can I buy a screen?
Contact us anytime with parts request(s) and we'll do our best to accommodate. lcdrepair@multimeterparts.com
This guy sounds like Bob Dylan :)
Thank you for your generous feedback. From now on, it'll be Bob Dylan w/o the music. sorry Mr Dylan...
Where can I buy the gray elastomers the link above doesn't work.
Thank you for your interest. We're trying out new commerce platform. For your consideration, please visit www.LCDRepairKit.com . Please contact us directly through site for discounts. Thank you.
Nhow
If they will last for 20 years why only 90 day warranty? Just messing with ya...
We're updated our Warranty to 12 months...1 Year. We're updating our database and inventory of replacement parts. Thanks for your feedback.
@@MultimeterParts Ordered new gray elastomers for my very old Fluke 87 and they work great. Thanks
Terrific! Thank you for your feedback, and we're always here when you need us. Cheers!@@mrkfsn
Looks like this guy is out of business...
Took a long hiatus. Couldn't pass up on some real opportunities as the tech companies inserted even more control over ecomm. We're glad to be back, and ready to help.