Awning Setup - Fiamma F80's
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- - Fiamma F80's awning
- Location of winder and rafter under bed at the barn doors
- Set up & pack down of awning
- Dangers of bringing awning out (we do encourage people not to bring it out if not sure of conditions, if you are inexperienced, when away from the campervan and when asleep)
- Always check wind in advance
Make sure sliding door is closed and pull out winder and rafter from back of barn doors under the bed
1 - wind out awning till legs can take load of awning (have tension towards your body when using winder)
2 - open legs by pulling out from hinge socket then fall to floor
3 - adjust height of legs using turn snib
4 - bring out awning to required length (the more the awning is out the greater chance wind can pick it up and damage it)
5 - insert brace in middle
6 - wind the awning in reverse to tighten fabric
7 - insert pegs with hammer x 4
To close awning:
8 - Take out rafter
9 - Take out Pegs
10 - move legs toward campervan to take load when winding in
11 - Wind in till legs lift off ground
12 - collapse legs into awning making sure bottom bracket sits flush to awning & make sure shoulder of the leg is pushed into bracket
13 - make sure awning is wind back flush to case (if it sits a little out you have not pushed the shoulder of the leg all the way in)
Our website
www.offsetcamp...
Hire our vans
hire.offsetcam...
Follow us
Instagram : / offsetcampervans
Facebook : / offsetcampervans
TikTok : / offsetcampervans