I have spectre 9, very high back pressure compared to osprey, omega, and octane. I'm testing 16lb recoil spring to help with gas. Works with nato ammo, still need to try with subs
@3:20 watch the ejection location. 1-2 o'clock at best = over gassed. Ideally ejection is at 3 o'clock. I would recommend an adjustable gas block and a different buffer weight. Also, CGS sells a ported front end cap for this can. Significant gas blow back reduction with minimal increase in sound. Might be worth checking out. It's only a hundred bucks and you don't need to touch the gun.
I run one on an 11.3” with a polonium k. it does excellent to correct overgas. but I did notice my cam pin is wearing the edge of the clearance pocket on the inside of my upper receiver after a few hundred rounds. It did this on both this upper and my 300blackout. I think that a black river tactical gas tube is likely a better solution than the bootleg because the bootleg bolt’s gas venting will still make your gun dirty
Funny enough certifying it today! Last 3 cans have been 2-3 days to clear hoping for the same! Also, turns out there is cross compatibility with the rugged obsidian mounts thankfully.
Shouldn't need a booster for the beretta since they are not browning style camming barrels. I don't own one but from what I understand it is ill advised cause the booster is jack hammering it's self in a straight line.
Nice video brother. Really interested in the spectra 9 not much out there on them yet. I was just looking up info was that can a flow design ? I initially was looking at the Omega9 k and Bauer p 9 mm cans no I’m undecided. It probably dedicated to a subgun Or occasionally on a pistol I’m new also to suppressing so all information I can get will aid in decision.
You can always call Capitol Armory and talk to someone there. It’s great being able to go in as they have all of the suppressors in a case that you can see, hold etc. they’re very knowledgeable and can help you decide. I went with the Spectre because it was so much smaller of a profile and much lighter as well than the Omega9k which was originally my first option.
@@kimchicowboy5053 my lgs has some suppressors in stock I might try them to see what he has. Definitely will call capital to see what they suggest after a talk with them to see what they say. Thanks again
9mm cans are pointless for pistols, unless it’s just for fun and to impress people. However, they are awesome for PCC’s. MP5’s with this can will be amazing.
Be careful shooting even with suppressed, maybe if you had subsonic ammo, you could be fine, but standard super-sonic is a little dangerous to your hearing, I am sure for the short time you did it, you were fine. Solid video!
@@kimchicowboy5053 ANR Design has a TH-cam video comparing the normal front cap vs the vented front cap. I personally haven’t used it but I can’t imagine it’s noticeably much louder if you’re wearing ear pro anyway and shooting mostly outside.
Great video. Subbed! If you like your rifle, I would suggest looking at Riflespeed AGB's. They have enough granular adjustment to allow you to tune the rifle to the can and even the specific round that you feed it. If you want to get a dedicated rifle for suppressed use, take a look at Primary Weapons Systems. You would be going from DI to a long stroke piston system but my PWS runs clean and is definitely less gassy than my DI AR. Only downsides are price and weight since they are a little heavier than their Direct Impingement brothers. Unless you're using a flow through design, it's gonna be gassy but tuning does help. Congrats on the quick turnaround on your form 4!
the ported front end cap helps huge with gas blowback- love your video btw i appreciate you posting
@@rvogel6909 thanks man! Good to hear.
I have spectre 9, very high back pressure compared to osprey, omega, and octane. I'm testing 16lb recoil spring to help with gas. Works with nato ammo, still need to try with subs
Good job Cowboy. My ScI Six with my Thunderbeast Dominus SR both got approved today! 🇺🇸🇺🇸
@@brianarevalos Congrats man. That’s awesome.
I’m on day 19 waiting for my suppressor.. Starting to get impatient 😅
KAK's Downward Venting BCGs could be something to look into. Not sure how it stacks up against the bootleg tho
@@Spudinske will look into that as well. So far just have the ported end cap coming.
I have kak, drops port pop to piston gun levels
Spectre 9 for a 2 stamp PCC is my ideal setup. If only it could be ordered for a discount without the booster.
@3:20 watch the ejection location. 1-2 o'clock at best = over gassed. Ideally ejection is at 3 o'clock. I would recommend an adjustable gas block and a different buffer weight. Also, CGS sells a ported front end cap for this can. Significant gas blow back reduction with minimal increase in sound. Might be worth checking out. It's only a hundred bucks and you don't need to touch the gun.
Yea looking at the Bootleg BCG and the front end cap. Thanks for the info!
go ahead and get the ported end cap. its not super flow through like the huxwrk but does the job on shorter guns
I have the Sci-Six and I changed out the front cap and it really helped with the blow back
Sounds like I need to snag one. Thanks!
@@kimchicowboy5053 when you get it make an update video on your thoughts!
@@cleanlikegator2725 will do!
I got the ported end cap but haven’t put it on due to how difficult it is to get the factory one off. How did you get yours off?
@@Tangy6 once I get mine I’ll make a video! Still waiting for it.
Funny enough Milspec mojo just posted a video about the Bootleg BCG, will need to check that out. Anyone run on?
I have them. They work. Been using them since 2019.
@@deebee3174 good to know. Thanks.
Yep I have a couple, and it is a great option if you want to keep your pinned gas block. Definitely makes a difference. Had mine for years.
I run one on an 11.3” with a polonium k. it does excellent to correct overgas. but I did notice my cam pin is wearing the edge of the clearance pocket on the inside of my upper receiver after a few hundred rounds. It did this on both this upper and my 300blackout.
I think that a black river tactical gas tube is likely a better solution than the bootleg because the bootleg bolt’s gas venting will still make your gun dirty
So friggin tight my dude! Nice!
Appreciate it!
Just snagged a Spectre9 on an impulse buy so fingers crossed for another 2/3 day clearing!
Fingers crossed for you!
Get the suppressor yet?!
Funny enough certifying it today! Last 3 cans have been 2-3 days to clear hoping for the same!
Also, turns out there is cross compatibility with the rugged obsidian mounts thankfully.
@@AndrewTPewPew awesome
Please get a direct thread mount for that Beretta and let us know if it works.
My Spectre is in jail or I would try it myself.
@@TheOccasionalGunTuber I’m assuming it woild
Great vid 💪🏻 what camera did you film with bro?
Appreciate it! Sony a6300. I use a sigma 16mm fixed or a Sony 55mm fixed lens.
@@kimchicowboy5053 cool thanks you have some pretty cool vids, keep,up the great vids and be safe 🤝🏻
@@makevelicustoms thanks man!
Shouldn't need a booster for the beretta since they are not browning style camming barrels. I don't own one but from what I understand it is ill advised cause the booster is jack hammering it's self in a straight line.
@@chicwboost I’ve talked to Capitol Armory and they recommended one.
i literally just want to know if it will run direct thread on a beretta
@@gabrielpark8910 when I picked it up from capital armory they recommended a booster to run it.
Nice video brother. Really interested in the spectra 9 not much out there on them yet. I was just looking up info was that can a flow design ? I initially was looking at the Omega9 k and Bauer p 9 mm cans no I’m undecided. It probably dedicated to a subgun Or occasionally on a pistol I’m new also to suppressing so all information I can get will aid in decision.
You can always call Capitol Armory and talk to someone there. It’s great being able to go in as they have all of the suppressors in a case that you can see, hold etc. they’re very knowledgeable and can help you decide. I went with the Spectre because it was so much smaller of a profile and much lighter as well than the Omega9k which was originally my first option.
@@kimchicowboy5053 my lgs has some suppressors in stock I might try them to see what he has. Definitely will call capital to see what they suggest after a talk with them to see what they say. Thanks again
9mm cans are pointless for pistols, unless it’s just for fun and to impress people. However, they are awesome for PCC’s.
MP5’s with this can will be amazing.
@@troychild yea, it’s practical for a bedside grab. But a sub gun or 300 is needed for the Spectre 100%.
I thought you don't need a booster for the spectre because it's so light?
@@ItsBiscoitoIndeed it’s light, but it’s not that light. Still can tell it’s on the end, especially on a pistol.
Im on day 27 (individual) for my sci six.
Hopefully soon for you then!!
You get it yet?
@@LoneStarDrakes no sir:( day 126 lol
@@LoneStarDrakes I got it this morning!
Be careful shooting even with suppressed, maybe if you had subsonic ammo, you could be fine, but standard super-sonic is a little dangerous to your hearing, I am sure for the short time you did it, you were fine.
Solid video!
@@KeekTheUnique I rarely shoot without ears. If anything a mag or so. Always outdoors too.
Dude… it’s never hot to go to the range!
You’ll be pleased then I’m going next Sunday. It’s peak summertime here almost and can only last so long in 100 degree heat lol
Got mine in 2 days.
What tool kit is that!?
It’s just a big bit kit from Home Depot.
@@kimchicowboy5053 thanks looking for one for my workbench 👍🏻
Get yourself a MP5 drop a 3lug adapter on That Specter 9
and have fun
Probably mp5 clone as I don’t have that kind of cash for a real one lol
@@kimchicowboy5053 me either, I have an AP5
A little late here, but does this can have the ability to switch out the rear for a tri-lug adapter?
Like the Omega, and others, etc
@@BigChungus0341 yes, silencero has adapters you can use with this can.
@kimchicowboy5053 Right on, thank you!
Some things you can do to reduce gas blowback
Raidworx Mach 15 charging handle
Riflespeed adjustable gas block or Bootleg BCG
CGS vented front cap
Will look into the charging handle. Thanks! Heard with the front cap the sound increases, curious by how much.
@@kimchicowboy5053 ANR Design has a TH-cam video comparing the normal front cap vs the vented front cap.
I personally haven’t used it but I can’t imagine it’s noticeably much louder if you’re wearing ear pro anyway and shooting mostly outside.
Lucky lucky
Bootleg BCG.
Clark Eric Harris Eric Lopez Melissa
Great video. Subbed! If you like your rifle, I would suggest looking at Riflespeed AGB's. They have enough granular adjustment to allow you to tune the rifle to the can and even the specific round that you feed it. If you want to get a dedicated rifle for suppressed use, take a look at Primary Weapons Systems. You would be going from DI to a long stroke piston system but my PWS runs clean and is definitely less gassy than my DI AR. Only downsides are price and weight since they are a little heavier than their Direct Impingement brothers. Unless you're using a flow through design, it's gonna be gassy but tuning does help.
Congrats on the quick turnaround on your form 4!
Great info! Thanks man.
Anderson Angela Young Paul Jackson Charles