WTF, is that "the Hail Mary"? I didnt recognize it at all, looks great! Looking forward to seeing more - but dont stress it for the views. Its your channel and your livelihood, whatever schedule & ambitions works for you man :) keep it fun. Content is great no need to change anything
Such an amzing build and hope to accomplish a fraction of what you have done in my lifetime with my build. May i ask what wheel set did you use and can you share a link? OPPS nevermind i just saw it in your info.
Does Plan B for the rear include a F450 rear axle with the longer rear springs? When I swapped my 1990 E350 I used all the suspension from the 2013 F250. All I had to do was modify and relocate the front leaf spring hanger for the longer leaf springs.
Nice man, that sounds like a good route. But my rear end is all good for this project, I just needed the rear leafs to hold the weight of the van better. I spec'd ATLAS Spring to build them at 8" lift for an 8k lb rear end spring weight, which is more than it is by 1000 lbs. After driving on these springs they ended up being a 4" lift. I had DEAVER Spring make new springs and they kick ass.
Yes it is a single rear wheel. Bora/Motorsport Tech wheel adapters will get you to the correct lug pattern and you can pick the thickness to get to the correct total width in the rear, to match the front.
Sweet will have to check that out! Can’t wait to see the road and off road test! We are still in the mechanical part of the build. The. We are moving torpedoing walls and interior. Axle swap will be the last of the project for us.
Where did you get the under-body boxes you have mounted on the driver side? I've been looking everywhere for something just like that for my bus build.
If I want buy your solution for my e-450 cube. And if I travel the world in south american or europe or africa. then how to repair if I need to replace your custom made shock and suspension ?
You’re not shitting when you say the details take as long or longer than the majority of the build to this point does . “ The Devil is in the details “ phrase didn’t just come from nowhere…. 😐
100% however I need to do it right and there are some final tweaks that I need to finish before that happens. I will shoot a van tour video on this van for sure.
Sorry at 5:30 where there is no music and no talking, youtube flagged a song and removed it.
What's the overall cost for that vehicle and the build?
@@PatrickCole-md9bu Couple hundred thousand.
Yeeeww that was sick! and a LOT of work!
Thanks brother!! Looking forward to linking up someday in the near future!
You guys knock it out of the park. Excellent fabrication and attention to detail...can't wait to see the final product.
New sub.
Thanks for checking in!
I just purchased a E450 and cannot wait to do this
I cannot wait for you to do it as well!
Heavy Duty Artist at Work Welds to Die for!
Tommy's no rookie! THX you!
Awesome build. Tommy has some awesome skills!
And he's not even 40 years old. Guy's grown up in the biz and it shows.
Excellent Build. I have had 4x4. Ford vans foe years. This is a. Dream Building. Excellent
Love it and very proud to have our Vantage Optics headlights on such an awesome build! Congrats Brian, you build a monster!
Absolutely Scott, it's a no brainer for any econoline van!
My guy with another amazing build!
WTF, is that "the Hail Mary"? I didnt recognize it at all, looks great!
Looking forward to seeing more - but dont stress it for the views. Its your channel and your livelihood, whatever schedule & ambitions works for you man :) keep it fun. Content is great no need to change anything
Thank you for the kind words, that means a lot. I would love to have covered the van build in the same way! Cheers!
LUV this build series and can't wait for more videos!
THX and appreciate the comment!
This is insane! Way to be brother. 8" lift with adjustable suspension!!
Got to get her east side this summer eh!!!
YES sir!@@auxbuilt4190
Such an amzing build and hope to accomplish a fraction of what you have done in my lifetime with my build.
May i ask what wheel set did you use and can you share a link? OPPS nevermind i just saw it in your info.
Fuck yeah ! I’ve been waiting for this video. Awesome job for the great video and the exceptional work at tra motorsports
Thank you for posting this !
Awesome Nick, thanks for watching for sure. The van came out great and this spring I'll do a walk around van tour and get her out in the dirt!
TH-cam sucks. Nice to see you back. Build looks good.
Thank you haha for sure!
Does Plan B for the rear include a F450 rear axle with the longer rear springs? When I swapped my 1990 E350 I used all the suspension from the 2013 F250. All I had to do was modify and relocate the front leaf spring hanger for the longer leaf springs.
Nice man, that sounds like a good route. But my rear end is all good for this project, I just needed the rear leafs to hold the weight of the van better. I spec'd ATLAS Spring to build them at 8" lift for an 8k lb rear end spring weight, which is more than it is by 1000 lbs. After driving on these springs they ended up being a 4" lift. I had DEAVER Spring make new springs and they kick ass.
Do you have any videos, or do you plan to show a video of your window deletions? Would love to see that.
Currently working on my van and the hardest was the track bar bracket, there's no space 😅.
HELLO .THANKS A LOT FOR YOUR VÍDEOS. I LOVE THEM. MY REGARDS TO EVERYONE. FROM GUATEMALA CENTRAL AMÉRICA I'M MANUEL.
Such an amazing build.
What big brake kit are you using for front and rear?
Can you explain the rear tires? Is it a super single? Or how does that work. Have a similar build I’m designing
Yes it is a single rear wheel. Bora/Motorsport Tech wheel adapters will get you to the correct lug pattern and you can pick the thickness to get to the correct total width in the rear, to match the front.
Sweet will have to check that out! Can’t wait to see the road and off road test! We are still in the mechanical part of the build. The. We are moving torpedoing walls and interior. Axle swap will be the last of the project for us.
Beast ! ~peace~
Yewww thank you!
Where did you get the under-body boxes you have mounted on the driver side?
I've been looking everywhere for something just like that for my bus build.
👍👍👍
If I want buy your solution for my e-450 cube. And if I travel the world in south american or europe or africa. then how to repair if I need to replace your custom made shock and suspension ?
Make it beefy enough like we did so that you can't break it!
Shackle flip?
Yes, ultimately we did this. Good call.
What’s the width on the new tires?
www.ebay.com/itm/254780980809
Who made the body! lol
I see a lot of bbs. Someone didn't clean the welds
part 2!
Shakle flip the rear. Blocks suck on so many levels.
Block was temporary. We ended up flipping the shackle and getting Deaver Springs.
You’re not shitting when you say the details take as long or longer than the majority of the build to this point does . “ The Devil is in the details “ phrase didn’t just come from nowhere…. 😐
100% Sounds like you have built things like this before!!
@@auxbuilt4190 Oh yeah , just not quite on the scale size-wise as you are with this rig . Making something no one else has or has seen before is fun.😉
you should at least do a walk through so we can see the final build....
100% however I need to do it right and there are some final tweaks that I need to finish before that happens. I will shoot a van tour video on this van for sure.
Brian can you share with me the specs for Atlas Springs on Hail Mary? Awesome build my man.
❤