Nice overview. One thing I’d add is that the barrel cap is the same thread diameter as the gspec barrel cap with the same pitch however it is ccw vs cw for the gspec cap and the Marui l96. You can buy the adapter from him but the standard ones aren’t going to fit. I’d say it’s an improvement because trying to tighten a ccw suppressor on an adapter mounted with a cw thread is super annoying because one thread will always try to loosen when you tighten the other one.
great video! sad to see some of those parts won't switch out! glad I have some bar 10s fully upgraded. I was going to buy ssg outer barrel for my bar 10 but it looks slightly loose. that piston/cylinder size is also a shame for ssg owners. I will be buying a new spring from him though. I love 13mm springs for easier pull!!! Currently use a pdi 520 and it's great but I want 650 fps so the 200% spring from him looks to be about perfect. maybe the 210...
If anyone wanted to know, the SSG10 piston fits perfectly in the Airsoftpro Cylinders despite their website advising to use only their branded parts. Thanks to this video, I confirmed the SSG10 piston to be a few mm smaller than the actual Airsoftpro piston.
By faaar best comparison vid.! Appreciate it a loot. To assume, If I buy NOV. Cylinder/piston/spring/guide together, it will fit in to Well MB03EA or Cyma 701, JG VSR 10 correct?
Thanks this was very helpful. Is there any way you could do a compatibility test between the SSG-10 and the Action Army AAC-T10/T11? I was able to import a T10 but I'm to upgrade it with Novritsch parts and benefit off that 25 year warranty
Great video. But turns out that the comparability of the bolt handles is a total bummer for me. I was going to buy a SSG10 a1 and turn it into a DARPA XM3 clone build but now that seems it's out the window since I cannot put a classic JG BAR 10 bolt handle on it and use a Remington 700 Black Bolt On Quick Load Knob Tactical Knob
It’s kinda hard for me to buy the Novritsch replacement screw set cuz I’m in Canada and it would cost around 40$ to get. However, I could buy the maple leaf reinforced body pins for like 8$ but I’m afraid that they won’t fit. It says that there JG bar 10 compatible though. So if you the bar 10 middle body screw is compatible with the SSg10 then the maple leaf screws should work as well. Btw, The screw in the middle on my SSg10 A1 is the one that’s striped. Could you buy any chance see if the bar 10 middle body screw fits in the ssg10? It would help a lot and would save me a lot of money. Thanks so much!
So can I just use a Ssg10 noverisch full cyllinder assembly and swap it into the JG bar 10? I want all my guns to be VSR compatible. You said there is some friction. Would you advise against it in this case or is it no big deal? Amazing video by the way!! Answered all my questions.
Nice video...hope you can answer my question. I have a VSR 10 from TM (Pro version). I wanted to buy the novritsch SSG 10 outer barrel (short version)...is it compatible? I know I will have to replace the inner barrel as well...do you recommend one in particular?
I personally have not tried the barrel on a actual TM VSR10 but I think the barrel thread pitch are the same. It should fit but I suggest research a bit more to get a definitive answer. For inner barrel I suggest going with lambda one 303mm vsr inner barrel.
Hi ...just a quick question does the maple leaf stock fit the ssg10 because there are rumors that it doesn't fit on the mag catch and hop up ? hove you tried it?
Don't worry about the o-ring that got damaged on the SSG10 Read under "O-ring fell out" - eu.novritsch.com/support/ssg10/troubleshooting/ Problem Description A big O-ring fell out of my gun when I took of the outer barrel. I have no idea where it is supposed to be installed. Reason: This o-ring goes in between the receiver and Outer barrel. It is there for mass production and for ease of the assembly process as it helps to center the Outer barrel in the receiver before the thread grips. After a couple of assemblies and disassembles by the customer, it will fall out and might even be broken. Solution Throw it into the trash. This part has no function once the gun is assembled. We will not put this ring into the SSG-10 starting from batch#3 as it seems to confuse customers too much.
@@5cmpersec If you were to swop the hopup chamer plus bucking and the inner barrel from the SSG10 into the BAR10, do you think you will be able to get similar performance to a SSG10?
Airsoft Sniper if those parts were to be swapped the accuracy and consistency should be same as a ssg10. However the durability of trigger group and cylinder/ piston are going to be quite poor for 450fps+.
BATTLE AIRSOFT España I wouldn’t say he lied intentionally as you can still make it fully compatible by swapping a few parts if you want much like how some other aftermarket parts do not work with stock VSR parts either due to tolerance and design. Like you can’t use 90degree trigger without a aftermarket 90 degree piston, you can’t use action army piston with stock cylinder, and you can’t use action army cylinder without using action army end cap etc.
Nice overview. One thing I’d add is that the barrel cap is the same thread diameter as the gspec barrel cap with the same pitch however it is ccw vs cw for the gspec cap and the Marui l96. You can buy the adapter from him but the standard ones aren’t going to fit. I’d say it’s an improvement because trying to tighten a ccw suppressor on an adapter mounted with a cw thread is super annoying because one thread will always try to loosen when you tighten the other one.
I was about to buy a VSR-10 spring for my SSG 10 but I'm glad I saw this video first. Thanks 👍
amazing video, when you got scared at 25.20 i got scared LOL. Amazing detail in your videos. answered all the potential questions I had.,
Very detailed . Tested everything . Great job.
great video! sad to see some of those parts won't switch out! glad I have some bar 10s fully upgraded. I was going to buy ssg outer barrel for my bar 10 but it looks slightly loose. that piston/cylinder size is also a shame for ssg owners. I will be buying a new spring from him though. I love 13mm springs for easier pull!!! Currently use a pdi 520 and it's great but I want 650 fps so the 200% spring from him looks to be about perfect. maybe the 210...
If anyone wanted to know, the SSG10 piston fits perfectly in the Airsoftpro Cylinders despite their website advising to use only their branded parts. Thanks to this video, I confirmed the SSG10 piston to be a few mm smaller than the actual Airsoftpro piston.
What a great and honest video! That settles it: I'll be ordering an ssg10 when this virus blows over.
Kevvy gigabyte and?
Better get one now and fix/mod everything that isnt optimized until the fields aren't closed.
Subscribed within the first two minutes of the video. Good shit bro
Thank you for this amazing video! I appreciate your testing and knowledge!
By faaar best comparison vid.! Appreciate it a loot. To assume, If I buy NOV. Cylinder/piston/spring/guide together, it will fit in to Well MB03EA or Cyma 701, JG VSR 10 correct?
Super informative video👍 Keep up the good work!
Thanks this was very helpful. Is there any way you could do a compatibility test between the SSG-10 and the Action Army AAC-T10/T11? I was able to import a T10 but I'm to upgrade it with Novritsch parts and benefit off that 25 year warranty
So, I want to install SSG trigger box into the Bar 10, that's not impossible, but difficult. Correct? Great video BTW!
Great video. But turns out that the comparability of the bolt handles is a total bummer for me. I was going to buy a SSG10 a1 and turn it into a DARPA XM3 clone build but now that seems it's out the window since I cannot put a classic JG BAR 10 bolt handle on it and use a Remington 700 Black Bolt On Quick Load Knob Tactical Knob
My ssg10 A1 Sllan screw rounded out/striped. If I buy a standard VSR10 replacement screw will it fit in the SSg10
depends on which one. The ones for mounting trigger unit to the receiver will not be compatible
Toby Zhang it’s the middle screw
@@southmoreconlin3757 i suggest purchasing the Novritsch screw replacement kit in this case.
It’s kinda hard for me to buy the Novritsch replacement screw set cuz I’m in Canada and it would cost around 40$ to get. However, I could buy the maple leaf reinforced body pins for like 8$ but I’m afraid that they won’t fit. It says that there JG bar 10 compatible though. So if you the bar 10 middle body screw is compatible with the SSg10 then the maple leaf screws should work as well.
Btw, The screw in the middle on my SSg10 A1 is the one that’s striped.
Could you buy any chance see if the bar 10 middle body screw fits in the ssg10? It would help a lot and would save me a lot of money. Thanks so much!
@@southmoreconlin3757 The three screws mounting the stock onto the receiver are the same spec as VSR.
will the silencer fit on the jg bar 10
So can I just use a Ssg10 noverisch full cyllinder assembly and swap it into the JG bar 10? I want all my guns to be VSR compatible. You said there is some friction. Would you advise against it in this case or is it no big deal? Amazing video by the way!! Answered all my questions.
i have a word.
the quality are similar both the body cases ?
Hi I’m seeing now your video and I would like to know if the original piston from the bar10 fits inside the ssg10 cylinder. Could you help me?
The ID of SSG10 cylinder is smaller, which means you will not be able to use bar10 piston in ssg10 cylinder
this video on the other hand, is far from being useless :D
Aa chamber + TDC is the way to go
The cyma vsr-10 is Jg Spec so Could i just purchase the Pistol head And swap it and would it work?
JG piston head and Nov piston heads are different in diameter. I’m not sure about cyma vsr-10 spec
@@5cmpersec cyma Vsr10 is Jg Spec
Nice video...hope you can answer my question. I have a VSR 10 from TM (Pro version). I wanted to buy the novritsch SSG 10 outer barrel (short version)...is it compatible? I know I will have to replace the inner barrel as well...do you recommend one in particular?
I personally have not tried the barrel on a actual TM VSR10 but I think the barrel thread pitch are the same. It should fit but I suggest research a bit more to get a definitive answer. For inner barrel I suggest going with lambda one 303mm vsr inner barrel.
@@5cmpersec ok...thanks. if you hear something that might help me
Hi ...just a quick question does the maple leaf stock fit the ssg10 because there are rumors that it doesn't fit on the mag catch and hop up ? hove you tried it?
I have not tried the maple leaf stock but in theory it should work. The SSG10 is identical to Bar10 in the mag catch and hop up area.
Don't worry about the o-ring that got damaged on the SSG10
Read under "O-ring fell out" - eu.novritsch.com/support/ssg10/troubleshooting/
Problem Description
A big O-ring fell out of my gun when I took of the outer barrel. I have no idea where it is supposed to be installed.
Reason:
This o-ring goes in between the receiver and Outer barrel. It is there for mass production and for ease of the assembly process as it helps to center the Outer barrel in the receiver before the thread grips. After a couple of assemblies and disassembles by the customer, it will fall out and might even be broken.
Solution
Throw it into the trash. This part has no function once the gun is assembled. We will not put this ring into the SSG-10 starting from batch#3 as it seems to confuse customers too much.
Airsoft Sniper That’s very interesting. I do think the o ring helps to keep the outer barrel slightly more centered. Oh well.
@@5cmpersec If you were to swop the hopup chamer plus bucking and the inner barrel from the SSG10 into the BAR10, do you think you will be able to get similar performance to a SSG10?
Airsoft Sniper if those parts were to be swapped the accuracy and consistency should be same as a ssg10. However the durability of trigger group and cylinder/ piston are going to be quite poor for 450fps+.
Is the bolt cap interchangeable though?
Do you mean the piece behind the bolt handle? The bolt handle cap is not interchangable.
So novritsch lie us?
BATTLE AIRSOFT España I wouldn’t say he lied intentionally as you can still make it fully compatible by swapping a few parts if you want much like how some other aftermarket parts do not work with stock VSR parts either due to tolerance and design. Like you can’t use 90degree trigger without a aftermarket 90 degree piston, you can’t use action army piston with stock cylinder, and you can’t use action army cylinder without using action army end cap etc.
Frambhueee no，only with ssg 10 cylinder