This is the best tutorial on how to tune up i have seen so far,actually seeing the negative affects of an ill tuned engine makes all the difference.keep em coming.
i have a thunder tiger tomahawk bx with a pro 18 engine, but cant get the tuning right. i had it done by a shop the the shop closed down and not the tuning is somehow not right. the factory setting never worked properly, as it would take 25-30 pulls to start, i would nout hit even 30mph when it is ment to hit 45 or 50mph properly tunes and it would move slowly when you started it on idle. can you tell me how mant turns clockwise/counter clockwise for the hsn lsn and idle screw? thanks
Hi, im still in break in process. the first three tanks run smooth and i tried to run the engine as rich as i could before engine stop. But now it would start after a good prime and then stop in a second? So i cant continue the break in process or do anything. I have new 20% nitro and the stock glow plug and it still shines red. I have tried every settings on the LSN and used a higher idle setting. It seems it cant get enough of fuel. Becaues if i drop fuel in the air intake it goes abit more
hello buddy, I'll buy this buggy, but it is my first nitro car, can you tell me, as you hang up the car? You carry the "off" button, or do something else? thx buddy!
Can u do a tuning vid of the hobao hyper 7 tq .28 if you still have it cos i wasted half a tank trying to tune it because wen i give throttle it quits and the i have went from lean to ritch about 2 full turns and still quits :(
10 ปีที่แล้ว
Great video. I have a nitro Turnigy rumble and changed the configurations of the carburetor, the car is not this working anymore, the engine does not turn on. Could you say what the original configuration of the carburetor? or a better way to regulate. I'm grateful for a response. Thank you.
Hey love ur videos have a question about upgrading my 1/8rtr serpant cobra nitro buggy with a new motor.. but last time I tried the motor didn't line up .. what kind of mount should be used any help would be greatly appreciated.
any chance you can do any more tune videos like most of your videos i have a hpi truggy 4.6 that takes me ages to start so any more tuniing videos would be good
Hello mate, I'm quite new to the nitro rc world and I would like a bit of advise on starting the engine. I have a nanda buggy, think it's got a sh.21 engine and the problem I have is I Can not get it to start when the engine is cold but if I heat it up with a hairdryer, then it starts first time. Any advise would be a great help and very much appreciated, thanks, Mark 🙂🙂
I guess you probably don't have the same buggy any more. I have found one being sold second hand, was wondering if its possible to increase ground clearance by replacing stock wheels with bigger ones?
okay thank you, but what's the problem if a nitro is jerking. I ran my truck maybe 1/8 to 1/4 of the tank then it start to jerk. can you help me. thank you
Hey can you help me? My carb fell off and now the tune is all messed up. Do you know what the factory steeing is cuase now it wont start. I have the same car as the on in the vid. Idk what to do.
I just got my self the my first nitro buggy and i just opened it and ran it with out tuning it. And now my car engine just turns of when i excellerate need help hopefully somone see's this video and gives me a good tip. Thanks a lot! !!
i had that issue with my hobao hyper 7 as well. the best thing to do is to set HSN and LSN needles flush to case, then start your car and sit it on a brick (keep it off the ground) and use around half-full tank at high idle speeds and revving it every now and then
adjust you throttle trim down, I have had that problem before and I turn the throttle trim down and it solved my problem, if that doesn't work then adjust your idle screw, that has also helped me
Tuning is same for all cars joshua (not one in vid) tune as is done on here and put the mid sped needle at factory setti gs if u got one tune hsn,lsn,idle in that order
JT12's R/C Videos the low speed is set perfect it's just the high speed when I'm driving it runs quite rich and then all of a sudden it will start to run different like its really lean I think it might be the case of stripping the carb down and giving it a good clean
This is the best tutorial on how to tune up i have seen so far,actually seeing the negative affects of an ill tuned engine makes all the difference.keep em coming.
This video is actually accurate unlike all the other videos on TH-cam. You just got a new subscriber
i have a thunder tiger tomahawk bx with a pro 18 engine, but cant get the tuning right. i had it done by a shop the the shop closed down and not the tuning is somehow not right. the factory setting never worked properly, as it would take 25-30 pulls to start, i would nout hit even 30mph when it is ment to hit 45 or 50mph properly tunes and it would move slowly when you started it on idle. can you tell me how mant turns clockwise/counter clockwise for the hsn lsn and idle screw? thanks
Is the LSN the one in the middle below the air intake? and the idle screw on the servo arm side?
Your videos are helping my tune my nitro rc. Being new to hobby, I'm finding it quite finicky.
Hi, im still in break in process. the first three tanks run smooth and i tried to run the engine as rich as i could before engine stop. But now it would start after a good prime and then stop in a second? So i cant continue the break in process or do anything.
I have new 20% nitro and the stock glow plug and it still shines red.
I have tried every settings on the LSN and used a higher idle setting.
It seems it cant get enough of fuel. Becaues if i drop fuel in the air intake it goes abit more
hello buddy, I'll buy this buggy, but it is my first nitro car, can you tell me, as you hang up the car? You carry the "off" button, or do something else? thx buddy!
i mess with my carb HSN and LSN of my turnigy ramble, please till how to set back to a default setting, still in break in process, hard to start...
Can u do a tuning vid of the hobao hyper 7 tq .28 if you still have it cos i wasted half a tank trying to tune it because wen i give throttle it quits and the i have went from lean to ritch about 2 full turns and still quits :(
Great video. I have a nitro Turnigy rumble and changed the configurations of the carburetor, the car is not this working anymore, the engine does not turn on. Could you say what the original configuration of the carburetor? or a better way to regulate. I'm grateful for a response. Thank you.
Hey love ur videos have a question about upgrading my 1/8rtr serpant cobra nitro buggy with a new motor.. but last time I tried the motor didn't line up .. what kind of mount should be used any help would be greatly appreciated.
Hi Tommie, you can buy adjustable engine mounts which will give you a bit more leeway
any chance you can do any more tune videos like most of your videos i have a hpi truggy 4.6 that takes me ages to start so any more tuniing videos would be good
Are parts still available for this buggy, like a fuel tank. Just picked one up used, and and i need a tank. Thanks for your time.
The one from the ACME Warrior will fit www.nitrotek.co.uk/spare-parts/acme-racing/acme-warrior-buggy-spare-parts/fuel-box-cover-set.html
Hello mate, I'm quite new to the nitro rc world and I would like a bit of advise on starting the engine. I have a nanda buggy, think it's got a sh.21 engine and the problem I have is I Can not get it to start when the engine is cold but if I heat it up with a hairdryer, then it starts first time. Any advise would be a great help and very much appreciated, thanks, Mark 🙂🙂
Could you do a tunning video of the thunder tiger mta4 s50 please I need help with mine
Hey, I was wondering if you have any problems with the acme attacker t. Cause I'm getting it soon.
Hi i have the 1/16 version of the same truggy. it keeps running off even in idle.. any advise?
I guess you probably don't have the same buggy any more. I have found one being sold second hand, was wondering if its possible to increase ground clearance by replacing stock wheels with bigger ones?
i need to know the performance and the noise made if the engine is too lean but still can run fast... i mean its critical point of lean.
Was this car stock before tuned anything???
Hi ! Can you tell your nitro % and glow brand and number please ?
Where is the best place to get nitro rc cars from
Can you make a video on how to tune Nitro engine using Tmaxx 2.5 Classic. I've a problem tuning mine.
thanks.
This video shows you how to tune it. Every nitro engine is the same tuning procedure.
okay thank you, but what's the problem if a nitro is jerking. I ran my truck maybe 1/8 to 1/4 of the tank then it start to jerk. can you help me.
thank you
Anyone got the factory settings my son adjusted them and I can't get it started
Hey can you help me? My carb fell off and now the tune is all messed up. Do you know what the factory steeing is cuase now it wont start. I have the same car as the on in the vid. Idk what to do.
Michael Gallagher How can you lose a carburetor? It accidentally fell off after you unboxed it? Call an exorcist.
I just got my self the my first nitro buggy and i just opened it and ran it with out tuning it. And now my car engine just turns of when i excellerate need help hopefully somone see's this video and gives me a good tip. Thanks a lot! !!
i had that issue with my hobao hyper 7 as well. the best thing to do is to set HSN and LSN needles flush to case, then start your car and sit it on a brick (keep it off the ground) and use around half-full tank at high idle speeds and revving it every now and then
hey mate can you answer this
everytime i start my nitro it wants to take of i have checked the clutch it isnt broken what do i do
adjust you throttle trim down, I have had that problem before and I turn the throttle trim down and it solved my problem, if that doesn't work then adjust your idle screw, that has also helped me
Why my nitro car speed is gone very low as engine seems like generating no power sound and smoke still fine though.
What is the voltage on glow plug?
nice tutorials and info..but it would be nicer if you focus the camera on the buggy while you're explaining something..
so we can look at it more..
r u gowing to do moer plz
will this work with any .21 engine
The tuning process is the same for any nitro engine, yes
JT12's R/C Videos tnx a lot 👍👍👍👍
I'm a big fan of your videos!!please make a video/tutorial with the SAVAGE XL 5.9
Tuning is same for all cars joshua (not one in vid) tune as is done on here and put the mid sped needle at factory setti gs if u got one tune hsn,lsn,idle in that order
When I give it full throttle on my Nanda it wants to cut out. Why is this?
Too lean on the HSN. Richen it out :)
neil atkin its running rich
my car stops 1 sec after start turning needles doesnt help NEED HELP
got any cars for sale
also is a .21 cxp nitro engine same as a sh 21 nitro engine
No, one is a CXP engine and the other one is an SH Engine
So will both engine's carburettors have the same default settings for the Hsn and Lsn
No, because they are different engines.
So do you know the default settings of the 21 cxp engine.can u tell me them if u dont mind.thanx a lot for everything
learning right here. thank you again
do you fancy giving me a hand tuning my engine it's being really temper mental installed a brand new glow plug but no different
I don't know how else to give you a hand other than produce videos which you've obviously already found! :)
JT12's R/C Videos the low speed is set perfect it's just the high speed when I'm driving it runs quite rich and then all of a sudden it will start to run different like its really lean I think it might be the case of stripping the carb down and giving it a good clean
Nitro 16 or 25%?
20 or 25%
Why does my nitro car automatically goes forwards
Your idle gap is to high, turn you idle speed screw anti clockwise
it's similar to Team Energy G8X set up.
your vids are very helpful
Thanks!
Thanx yuo ser yuo help me weel😃👏👏🇰🇼
Damn you leaned the crap out of that.
you turn the needle in to it to get power you turn it out it will bog down
good vid man!!
i like that air filter
CAN ANY ONE OF YOU GET ONE FOR FRRE FOE MEE PLZ I WANT ON IVH BEEN ASKING ONE FOR A LONG TIME PLZ PLZ PLZ PPLZ PLZ
Yay another vid :D
that motor sounds mean!
can you tune my buggy please haha
Sh 21 engine I shit never by one
Never try this engine!
WHY. I have two and there fine.??
Where is the best place to get nitro rc cars from