Just what I was looking for, the comment section was a big help as well. Way to go fostering an informative community who is so willing to learn as well as share knowledge.
I hardly ever comment on videos but this one is exceptional. All the tricky details shown while one hand is occupied with the phone. In just a few minutes. Thank you for posting. Keep up the great work.
Came back to watch how you removed the electrical connectors at 6:05. Thanks for your careful camera work, saved me a lot of time figuring this out myself.
Yellow plugs and cable are for SRS system not ABS. The correct procedure when dealing with anything air bag related is to disconnect the battery and wait 3 minutes. Otherwise you can possibly set off one of the airbag components. Including the seat belt tensioner.
Thank you for the informative video. When removing the passenger seat is the process the same as the driver's side? I appreciate your attention to detail, thanks.
This was a great help! With my 08 SC I had a few more connectors to undo but they came apart pretty easily. One of them wasn't easy to figure out so to help someone else: one of mine had a natural color plastic piece that needed to be slid back to allow the pieces to separate. With the seat out, I can lay on my back under the dash to remove the dealership installed alarm.. It's put in with t-taps and appears to only serve the purpose of having a blinking LED.. And I guess it allows dealership sales people one fob to open cars on the lot. Lame.
Great video, thank you for being so careful in your explanations. I have a 2007 with integrated seatbelts. Is is basically the same? I have to remove the seatbelt assembly that's inside the seat, but I think I at least have to remove the seat to get to it?
Good day Miguel, I have 2003 element with no build in airbag in the seat. I recently replaced seats with newer ones (from 2004 model) and those seats have side airbags build in. Is there anyway to have those activated with 2003 model? Car only has 2x harnesses, just like on your video one yellow and one gray. However the new seats have 3x harnesses (I believe the 3rd one is for that side airbag sensor) Is there any connector that can make it operational? Thanks!
What year is your Honda Element does it have a airbag in the seat because mine is a 08 and the seatbelt and airbag is on the seat can you still remove it
mine is a 2007 and the airbags deployed. I'm trying to just get the seatbelt assembly out so I can get it repaired. How hard was it to do yours? And do you have any tips?
You can remove tin, the only thing the airbag light will come on in your dashboard but not seatbelt beeping not. You can always buy a resistor and add it to the cable so the light will be off
@Element_lifestyle any idea where to get a resistor? I'm looking at doing this on passenger side for long term camping but keep reading that if airbag light is on, the system won't work at all. It will give me a much better layout if I can permanently remove it. I love your videos.
The driver seat was simple. But on the passenger seat, there is a second yellow plug. How do you undo that one? Not seeing a tab on it. At least, not easily.
Morning would you happen to have a good resource for replacing the dash cluster temperature gauge? Mine works but the needle fell off and my glue tape bandage is not working anymore 😅. Looking to replace it completely with a new part if possible. Thanks.
Just what I was looking for, the comment section was a big help as well. Way to go fostering an informative community who is so willing to learn as well as share knowledge.
I hardly ever comment on videos but this one is exceptional. All the tricky details shown while one hand is occupied with the phone. In just a few minutes.
Thank you for posting. Keep up the great work.
Came back to watch how you removed the electrical connectors at 6:05. Thanks for your careful camera work, saved me a lot of time figuring this out myself.
Glad it help it you out . 😎🙏👍
Yellow plugs and cable are for SRS system not ABS. The correct procedure when dealing with anything air bag related is to disconnect the battery and wait 3 minutes. Otherwise you can possibly set off one of the airbag components. Including the seat belt tensioner.
Yes that right. It is for the SRS. I confused when said abs. 🙂. Disconecting the battery is a must and right procedure. Thanks for catching up that 👍
THAT went without SAYING. Any intelligent person watching this knew that he simply MEANT to SRS. Cmon, man. 😮
Now I can really clean my Element up right. Thank you very much sir!
Great video! You took your time and explained your instructions. Well done.
Thank you
🙏
WOW, your video is great, you explained this so easily... and I could see everything you were talking about. Thank you 😊
Thank you for the informative video. When removing the passenger seat is the process the same as the driver's side? I appreciate your attention to detail, thanks.
Your welcome, yea it is
This was a great help! With my 08 SC I had a few more connectors to undo but they came apart pretty easily. One of them wasn't easy to figure out so to help someone else: one of mine had a natural color plastic piece that needed to be slid back to allow the pieces to separate. With the seat out, I can lay on my back under the dash to remove the dealership installed alarm.. It's put in with t-taps and appears to only serve the purpose of having a blinking LED.. And I guess it allows dealership sales people one fob to open cars on the lot. Lame.
Thanks for sharing
Thank you so much. This was exactly what I needed
Great video, thank you for being so careful in your explanations. I have a 2007 with integrated seatbelts. Is is basically the same? I have to remove the seatbelt assembly that's inside the seat, but I think I at least have to remove the seat to get to it?
You welcome . Very similar
If I don't want to disconnect the wiring, how far back further than the rail can I place the seat if I just unbolt it? Thanks, great video!
VERY helpful!! Thank you! I hope you find many $100 bills ;)
Yw, I found $41 and some change. :)
Great video!! Very well done. Very informative
Very well done video! Thanks. My driver's seat leans back a little bit only on the driver's left shoulder side. I need to see if I can figure out why!
Thanks. I hope you can fix your seat. Is nice to have it working properly.
Good day Miguel, I have 2003 element with no build in airbag in the seat. I recently replaced seats with newer ones (from 2004 model) and those seats have side airbags build in. Is there anyway to have those activated with 2003 model? Car only has 2x harnesses, just like on your video one yellow and one gray. However the new seats have 3x harnesses (I believe the 3rd one is for that side airbag sensor) Is there any connector that can make it operational? Thanks!
Another awesome video Senor Lima
😎🇵🇪🇵🇪
Hi can I switch the left and right front seat? Because the driver seat shake front and back little bit every time I apply the brake
Great informative video! Thank you.
THanks, well done!
What year is your Honda Element does it have a airbag in the seat because mine is a 08 and the seatbelt and airbag is on the seat can you still remove it
Mine is a 200, I think your has some extra airbag plugs that need to be disconnected but almost all the same removal
mine is a 2007 and the airbags deployed. I'm trying to just get the seatbelt assembly out so I can get it repaired. How hard was it to do yours? And do you have any tips?
Thank you for the information
Can I remove the passenger seat permanently or will there be a problem with the seat belt alarm and/or air bags when I turn the ignition on?
You can remove tin, the only thing the airbag light will come on in your dashboard but not seatbelt beeping not. You can always buy a resistor and add it to the cable so the light will be off
@Element_lifestyle any idea where to get a resistor? I'm looking at doing this on passenger side for long term camping but keep reading that if airbag light is on, the system won't work at all. It will give me a much better layout if I can permanently remove it. I love your videos.
Did you ever figure out how to permanently remove the front passenger seat?
The driver seat was simple. But on the passenger seat, there is a second yellow plug. How do you undo that one? Not seeing a tab on it. At least, not easily.
I took mine out without disconnecting the battery. Will this be a problem?
Thanks
Thanks!
Thanks for putting together a nice reference video. Picked up a 2007 and need to deep clean it.
Morning would you happen to have a good resource for replacing the dash cluster temperature gauge? Mine works but the needle fell off and my glue tape bandage is not working anymore 😅. Looking to replace it completely with a new part if possible. Thanks.
@oliverschmidt1365 good morning , th-cam.com/video/BW_WxpmuqJ8/w-d-xo.htmlsi=Bj-hNLI8AUR_fwE7
@ Excellent 👍 Thank you very much!
Your welcome , you can also contact instagram.com/classicautomotivenc/profilecard/?igsh=MzRlODBiNWFlZA==
He can fix it for you
Great job thanks
Hopefully I can find some hundred dollar bills 💀😂😂