You could also upgrade your main beam to LED too as it look daft having halogen high beam! I had LED in high beam for quite a long time and it’s worth the upgrade! It lights up a lot further down the road so I can see better at night especially spotting the hazard like a deer in good time!😊
Generally speaking if you have reflector headlights you will be able to see the bulb inside the headlight from the front of the car. With Projector headlights you will only be able to see a lense similar to the video posted. If still unsure search for projector Vs reflector in the search box on here.
Is it right that there is no light pattern with led headlights ? I have some in my vectra c and they are really bright but don't seem to be lighting up the road the distance yours are 🤔
What type of headlights do you have? Is it Projectors or reflectors? If you have upgraded it to LEDs in reflectors and if it has no cut off line then you’ll probably be run the risk of dazzling oncoming cars, if you been flashed then you need to have a look at different led bulbs. I have two novsights in my car in reflectors. One is my first bulbs I brought hasn’t got a very good cutoff line and I feel concerned that I may run the risk of getting flashed by oncoming cars, then I brought another pair of longer length led bulbs has got better cutoff line and I have less likely to dazzle oncoming cars. I did get flashed by one or two cars till I drop the beam down a bit and I don’t get flashed anymore. Hope this helps. It all depends on configuration of the LED bulbs Ps. LEDs in reflectors are not supposed to be designed for them really. Same goes with HIDs but you might get away with LEDs in reflectors
Nice video! Thinking of buying this for 2007 Mercedes ML to eradicate the dull yellow halogens.. reliability wise how are they holding up? Does the Canbus come attached or separate? I think Novsight leds have canbus included..
You are cover most of the cooling fan with the cap. Because you are blowing Air throw the hole inside your hedlighthousing the pressure is inside higher than outside and the fan moving slower. I would be very carefully with this solution 🔥🔥🔥 ...sorry for bad English
I've a hyundai i30 my dust cap is flat, unlike yours, which is dome shaped. I'm worried ill still be able to fit the dust cap back on, eith the size of the fan? I don't want to leave the dust cap off, and end up with condensation in the lense etc
depends on how far the distance between the fan intake to the lid. in his case, judging from the video the lid totally blocked the fan without a hole. no airflow would kill the LED chips long before you damage your headlight housing. though, the plastic bulb base might be melted if the material melt point is below 125C (i would bet the LED chip thermal junction is above 130C if heatsink temperature is already 125C. probably burned itself already at that point).
Were your H.I.D. bulb 8000k or 10,000k? They looked similar my 8000k bulbs, but have a deeper blue tint to them. I've seen 8500k and 9000k listed before
Hi, a question if I may. When you removed the headlight unit you have two places to put the bulbs in, did you install the leds in the inner or outer ones?
![ง้อ (ALRIGHT) - FOURTH Prod. by URBOYTJ [ OFFICIAL MV ]](http://i.ytimg.com/vi/Qs8ZeV6Dqj8/mqdefault.jpg)
![รวมมิตร ภาพนี้ก็ฮาเหมือนกันนะเนี้ย #4 SS2 [ พากย์นรก MEME.EXE ] | easy boy](http://i.ytimg.com/vi/kl86m9gnLt8/mqdefault.jpg)
I was trying to find some good leds to put on my car..i click the first video that i see..BOOM...i have the same car..🔥
Still going strong to this day
Awesome where did you purchase them?
@@Vwowner_w8_1.9tdi_2.5tdi lol he liked your comment but didn't even answer your question
You could also upgrade your main beam to LED too as it look daft having halogen high beam! I had LED in high beam for quite a long time and it’s worth the upgrade! It lights up a lot further down the road so I can see better at night especially spotting the hazard like a deer in good time!😊
@@davidriley9194 dont have the car anymore, my new car has LEDs as standard
Don't know if you'll still see this but how do you know if your headlights are projector or reflector?
Generally speaking if you have reflector headlights you will be able to see the bulb inside the headlight from the front of the car.
With Projector headlights you will only be able to see a lense similar to the video posted.
If still unsure search for projector Vs reflector in the search box on here.
Is it right that there is no light pattern with led headlights ? I have some in my vectra c and they are really bright but don't seem to be lighting up the road the distance yours are 🤔
What type of headlights do you have? Is it Projectors or reflectors? If you have upgraded it to LEDs in reflectors and if it has no cut off line then you’ll probably be run the risk of dazzling oncoming cars, if you been flashed then you need to have a look at different led bulbs. I have two novsights in my car in reflectors. One is my first bulbs I brought hasn’t got a very good cutoff line and I feel concerned that I may run the risk of getting flashed by oncoming cars, then I brought another pair of longer length led bulbs has got better cutoff line and I have less likely to dazzle oncoming cars. I did get flashed by one or two cars till I drop the beam down a bit and I don’t get flashed anymore. Hope this helps. It all depends on configuration of the LED bulbs
Ps. LEDs in reflectors are not supposed to be designed for them really. Same goes with HIDs but you might get away with LEDs in reflectors
Nice video! Thinking of buying this for 2007 Mercedes ML to eradicate the dull yellow halogens.. reliability wise how are they holding up? Does the Canbus come attached or separate? I think Novsight leds have canbus included..
Working fine thus far, I love the 'instant on' function of them, unlike HIDs which have a ramp up time.
My car is non CANBUS so I dont know
You are cover most of the cooling fan with the cap. Because you are blowing Air throw the hole inside your hedlighthousing the pressure is inside higher than outside and the fan moving slower. I would be very carefully with this solution 🔥🔥🔥 ...sorry for bad English
no the fan is an exhaust fan, it works fine how it is thanks
I've a hyundai i30 my dust cap is flat, unlike yours, which is dome shaped. I'm worried ill still be able to fit the dust cap back on, eith the size of the fan? I don't want to leave the dust cap off, and end up with condensation in the lense etc
Just buy replacement dust caps on line suitable for hid or led. Very cheap
Buy flexible dust caps suitable for hid or led. Search on line. Fairly cheap.
@@tonystewart6360 cool thanks!
is it dangerous to overheat if we don’t cut a hole in the back of the lid ?
depends on how far the distance between the fan intake to the lid. in his case, judging from the video the lid totally blocked the fan without a hole. no airflow would kill the LED chips long before you damage your headlight housing. though, the plastic bulb base might be melted if the material melt point is below 125C (i would bet the LED chip thermal junction is above 130C if heatsink temperature is already 125C. probably burned itself already at that point).
Can i put these in my foglights ?
Thy are N7 size - not for fogs mate.
@Evan: These LED's comes in different versions/socket types! (Check your car's manual, you'd be able to see if you need H7, H8 or whatever!)
Thanks a lot
Any reason why these would only be lighting up about a metre in front of me?
not installed correctly
Have you tried these on a bike yet
Were your H.I.D. bulb 8000k or 10,000k? They looked similar my 8000k bulbs, but have a deeper blue tint to them. I've seen 8500k and 9000k listed before
6000k
good stuff mate, how have these been holding up? any flickering or issues?
stil going strong mate
Did you leave the cut out hole on your dust cap on purpose for the cooling system?
yes
Hi, a question if I may. When you removed the headlight unit you have two places to put the bulbs in, did you install the leds in the inner or outer ones?
the dip beam inner
@@cruiserbrahuk5411 thanks, bro
Mine arrive tomorrow:)
Mine arrived 3 months ago and they look much better and mine got reflectors. The beam pattern is spot on!
This lights is canbus?
Nice review 👌👌👌👌
What rubber did you put before locking?
?
Are these error free?
Link ?
Just open the light
Przez większą część montażu leda w lampie widac tylko twoje ręce.Ustaw inaczej kamerę.
May I ask where are you located?
UK
Si alguien de Lima Perú desea esos tipos de focos led para su auto pasen la voz, trabajo de electricista cerca al aeropuerto J.CH.
english only