It works. Use adhesive paper tape cut to 7mm wide. If it does not work on one ribbon, try on the other ribbon, at the same place - at the inner corner.
But with this solution the TV was updated without having any more problems? Or will he do it again in the future? In the sense of making the lines pop?
Worked perfectly, thank you. I was given a Toshiba 50UA2B63DB TV and told I could have it if I could fix it as he'd already bought a replacement. I was considering taking it to a repair shop tomorrow when I found your video with an almost identical picture problem. The layout is different but the principle was the same. I don't know if you mention it anywhere but it was 8 connectors covered up, had to pause and count them. Mine was the data ribbon on the left and the 1st 8 connectors left to right. With trial and error I found the right spot on about the 5th or 6th go. Thank you again.
hi need help bro what about oled lg cx 55 have a horizontal white stripe at bottom not very noticeable so any fix or way to minimize it and my concern if this tv will get worse over time or risk to stop working !? to be honest i found a deal running about 2 year with a very good price and i cant affroad new :)
I believe this is a temporary fix of the T-CON board as theses cables connect from the T-CON to the main board. So if you want it fixed for good replace the T-CON and T-CON cables.
Samsung will sell it to you but the cost is about the same or more than a new TV depending how old yours is. A screen replacement is never worth it unless replaced under warranty (which doesn't cover physical damage).
We have one of our TV''s a hitachi smart tv,with a translucent band across the bottom approx. 2 inches high, I think it's a manufacturing induced fault with the contact strips on the screen, so won't be fixing it when it pops, it will be a spares tv
Kind of worked for JVC LT-58CA810. Started from leaving first and then second open, closing a bunch from 2 to approx 10. Then moving around closing 1 to 8-10. Ended up covering only the first one and it worked, however there is a barely visible line colour dependant remaining, which is fine with me, especially compared to the original problem. Thanks for the guidance in the video!
Thnk u so much this is exactly wah is wrong with my lg screen the picture isn’t perfect and all the tv technicians I called said I would have to change the screen…
This video guided me, thanks. The VGH line was partially shorted. With all screen flexes connected it had 18V instead 25V. I just separated it using tape and tv came to life.
Tried it on my 55in LG TV and what can i say, i was doubting but it really worked. Took me a while to find the location but it works now nicely. Don’t know why but who cares.
I used a simple thin sticky tape and made 2mm x 10mm strips and placed them radomly until i found the right place. It took me about 15min and 10 different locations. Cheers
Otro tapando contactos de la faja del cable con cinta aislante. Pero porqué no reparas en lugar de hacer chapuza?? Está claro que con esa "reparación" no está funcionando el panel al 100%, porque de fábrica no dejan desconectados esos pines de la faja del cable para que no se averíe???
hah normal that this is a defect of the screen to fix it 100% you have to replace the screen which costs money also this is a repair that we have fixed, let's say 90% working
It works for my LG 47" TV. Hard job! I try 8 times to apply the tape. Share my method-- don't cover first 2 pins. make tape width 4-6mm and apply from 3rd pin. there are two types of wires- 50p or 51p. so you need to try 4mm to 6mm with pin pitch increase to get the best result.
I Was Moving My 55 inch canyon Tv And I Press The Screen it's Not Cracked, But It First Has Lines Then It Turns White With A black Splash, but above The Screen I Can See people on the Screen Can It Be Repaired
I’d love to know as well! Anyone not just guessing here? My guess is that there are some contacts duplicating each other like Line1A and Line 1B and once 1A malfunctions, it needs to be cut for the line 1B to take over. But just a wild guess. Would like to hear a professional
Hi I clean my lg oled then didn’t want to turn back on I unplugged it and try 2 days later and it works with a little bit of horizontal lines on the bottom right. Then the image was perfect for 1h30 minutes and it turned of and wen I try to turned back looks like it’s going to turn on but I doesn’t can you please have an idea on how to fixed that it’s like it goes on a safe mode or something. Anyway thanks for the video you post that’s really cool to help people like that.
The cleaning liquid is flowing into the glued ribbons from the screen panel (this are orange ribboncables directly from LCD) There is many from this type, and are located on the bottom of the screen, connected to a small pcb on the bottom of the TV, mostly under the speakers, covered with a plate. Disassemble the plate, and search wich glued ribbon is faulty, with switched on tv, try to fine push the ribbon cables to the panel, with a bank cards edge. If the stripes disappears, you have find the faulty piece. you must then make something (rubber stripe or silicone stripe) that continous push the ribbon to the PCB after reassembly.
How can it work if you partially sever the connection between the screen and the video board? Makes no sense.
Which pins exactly do you cover
Hello. Doesn't applying glue cause a problem in the transmission of information?
And why didn't you open the flat cable in the first step
98% video
2% explaining
Nxt time try to put some text or subtitle what about ur doing or next steps. Jst like that.👍
if you don't have eyes to see the text, I'm not a doctor to cure people's eyes
Kann Mir bitte jemand sagen, wie das band heißt, was er im Video geklebt hat???? Please HELP HELP
Pershendetj , ka nje Samsung Smart Tv UE55MA9009
It works. Use adhesive paper tape cut to 7mm wide. If it does not work on one ribbon, try on the other ribbon, at the same place - at the inner corner.
That's what I was trying to find out. How wide to cut the tape?
My LG smart TV ln5700-tb is having same issue. Please can you help me out?
I can't believe this worked but it did! The TV repair guy said it needed a new motherboard and wasn't worth repairing. Just shows what he knows!
How is the tv now?
How is the TV now
But with this solution the TV was updated without having any more problems? Or will he do it again in the future? In the sense of making the lines pop?
Worked perfectly, thank you. I was given a Toshiba 50UA2B63DB TV and told I could have it if I could fix it as he'd already bought a replacement. I was considering taking it to a repair shop tomorrow when I found your video with an almost identical picture problem. The layout is different but the principle was the same. I don't know if you mention it anywhere but it was 8 connectors covered up, had to pause and count them. Mine was the data ribbon on the left and the 1st 8 connectors left to right. With trial and error I found the right spot on about the 5th or 6th go. Thank you again.
Hi on toshiba you fixed 6,7 or 8 PIN? From 1 to 8 or from 2 to 9? Thanks
would you explain how this fix works?
hi my 49 inch 4k tv has just one line very thin going from toooop to the bottom will this work for me ?
hi need help bro what about oled lg cx 55 have a horizontal white stripe at bottom not very noticeable so any fix or way to minimize it and my concern if this tv will get worse over time or risk to stop working !? to be honest i found a deal running about 2 year with a very good price and i cant affroad new :)
But still dont know what is the problem? Tv screen or ribbon cable or motherboard where the problem starts ?
Panel fault only
I believe this is a temporary fix of the T-CON board as theses cables connect from the T-CON to the main board. So if you want it fixed for good replace the T-CON and T-CON cables.
I want my Samsung fixed so bad I need a screen where would I get one
Samsung will sell it to you but the cost is about the same or more than a new TV depending how old yours is. A screen replacement is never worth it unless replaced under warranty (which doesn't cover physical damage).
Брат не хотелось бы тебе свой телек отдавать и на сколько твой скотч хватит мне интересно!?
actually covered which pin of the pcb?
I have Toshiba 55 inches with the same problem i did it and it work good but in a few minutes it comes again, please why?
Does anyone know how long the TV will last after repair?
Rodriguez Michelle Brown Nancy Thomas Charles
We have one of our TV''s a hitachi smart tv,with a translucent band across the bottom approx. 2 inches high, I think it's a manufacturing induced fault with the contact strips on the screen, so won't be fixing it when it pops, it will be a spares tv
I have the same make TV with the exact same problem, an inch or so group of lines across the bottom . Did you find a solution?
Kind of worked for JVC LT-58CA810. Started from leaving first and then second open, closing a bunch from 2 to approx 10. Then moving around closing 1 to 8-10. Ended up covering only the first one and it worked, however there is a barely visible line colour dependant remaining, which is fine with me, especially compared to the original problem. Thanks for the guidance in the video!
My LG smart TV ln5700-tb is having same issue. Please who can help me out?
It takes to long to sech
Thnk u so much this is exactly wah is wrong with my lg screen the picture isn’t perfect and all the tv technicians I called said I would have to change the screen…
Tengo un tv LED Gtronic 32 panel pt320at02xc1 con líneas vertical y soy de Venezuela
This video guided me, thanks. The VGH line was partially shorted. With all screen flexes connected it had 18V instead 25V. I just separated it using tape and tv came to life.
How did you identify the VGH line?
@@wisdomobukata9154 Should be marked on pcb.
Thanks for watching
So if this problem reoccur on another part of the screen what is the fix.
Imadh je usta tu lumt
Prsh mu po mi ndryshon ngjyrat e ekranit a eshte i njejti prob si ktu ne video?
adverts on vids like these is nuts
Wholey crap this actually worked 😅
Samsung UE55Es7000 problem lcd
Tried it on my 55in LG TV and what can i say, i was doubting but it really worked. Took me a while to find the location but it works now nicely. Don’t know why but who cares.
😎😎👍👍
Tell me please, what kind of tape and how wide tape you used and where do you placed it? I have Lg NANO cell and i can't find it
I used a simple thin sticky tape and made 2mm x 10mm strips and placed them radomly until i found the right place. It took me about 15min and 10 different locations. Cheers
Excellent video this fixed a hitachi 58inch with the same problem
Easy follow instructions and tv is now working ok
I have the same 58 inch Hitachi with lines across the very bottom of the screen. Did you follow these steps and solve the problem?
Anderson Barbara Martinez George White Cynthia
Lopez Daniel Rodriguez Michelle Hall Michael
This is informational ASMR! Well done 👏🏿
Magagawa p po ba ang tv ko na hanabishi..natuluan po sya ng tubig ulan..tapos po my guhit n sya..
Rodriguez Jennifer Miller Brenda Allen Laura
Same problem...
Solution
Can you do a video on a bush tv pls same problem x
My is Hisense 55 inch it has this line issues and it doesn't have t-con board
Otro tapando contactos de la faja del cable con cinta aislante. Pero porqué no reparas en lugar de hacer chapuza?? Está claro que con esa "reparación" no está funcionando el panel al 100%, porque de fábrica no dejan desconectados esos pines de la faja del cable para que no se averíe???
hah normal that this is a defect of the screen to fix it 100% you have to replace the screen which costs money also this is a repair that we have fixed, let's say 90% working
Merci 👍🏼 j'allais changer de téléviseur mais ça pourra attendre quelques mois avant que je change ma TV grâce à cette solution
Question is how long do we need to make on the paper to block ribbon lines?
Resp Sir! Nice Class Sir. -- ChinnaRao Paderu Andhrapradesh
It's working thank you
Please synix 50 inch horzontal line
Nice solution. Realy Good video. Congratulation.
Is there any place in Nigeria I can fix my 55" LG OLED tv ?
Fixed yet?
It works for my LG 47" TV.
Hard job! I try 8 times to apply the tape.
Share my method-- don't cover first 2 pins.
make tape width 4-6mm and apply from 3rd pin.
there are two types of wires- 50p or 51p.
so you need to try 4mm to 6mm with pin pitch increase to get the best result.
would you explain how this fix works?
White Michael Wilson William Lee Thomas
Thanks a lot Bro, You saved my $425 as LG engineer suggested to replace the screen.
Hey what tape U use to cover the thing?
@pewdiepiipewwie2904 Yes, still working
@@anglerforlife7538 normal selve tape
@@anglerforlife7538selve tape
White Amy Jones Timothy Thomas Sarah
Alt yazıları açarmısınız lütfen
How, you don't explain
I this fixed my tv thank you
Cooood👌👌👌👌👍👍
Thanks master found that helpful
I Was Moving My 55 inch canyon Tv And I Press The Screen it's Not
Cracked, But It First Has Lines Then It Turns White With A black Splash, but above The Screen I Can See people on the Screen Can It Be Repaired
Ku gjendeni me lokacion
Grazie per la condivisione
Good
What Tape are you using?
It works will it cause problems in the future?
There stil some lines but it’s much better
Is that a permanent fi x ??🤔
Great job ,I repair 2 of my tvs😊😊
Who tryed this method?
please seport me
THX!! I have tried with Grundig.... Left side was "dead" . And. Wow....
Excelente 😊
Kya aap OLED thik karte hain ?
Grande maestro !!
Brb
Very helpfull!!
My LG 49UF640T Horizontal lines on screen now is fix but i do with transparent scotch i hope that never going melted. Thank you !
Hi, Thank you so much, i follow your tips and it works for my Smart LG 55" . I really appreciate you have save me a lot of strees and money.
I LOVE YOU MAN
You are always chewing gum. 😂😂
by luck ?
👍👍👍
Ciao io ho fatto ma ho perso un po' di colore sulla dx, come risolvo? Grazie
try to cover less lines or more lines. either up cover the lines or down cover the lines
@@RepairAllTV ok grazie 🙏, provero' come mi hai detto
Is it working on Samsung 32" UA32J4300
I have also problem with jvc smart 55inch switch tv on than screen is black
It was work for me for couple months but not now . Anybody know the issue?
Thank you ❤️
You are amazing. Wtf. How??? But it worked
please explain why does this work. what is the background?
I’d love to know as well! Anyone not just guessing here?
My guess is that there are some contacts duplicating each other like Line1A and Line 1B and once 1A malfunctions, it needs to be cut for the line 1B to take over. But just a wild guess. Would like to hear a professional
Where do we get strip?
i solved 2 tv by follow this video...thanks
How did you get it done?
Beautyfull video sir
Could someone explain how this fix works?
What??
good❤❤❤❤
😂😂😂😂😂😂😂😂😂😂😂😂😂😂
Mera bhi tv ada dikh raha hai
Hi I clean my lg oled then didn’t want to turn back on I unplugged it and try 2 days later and it works with a little bit of horizontal lines on the bottom right. Then the image was perfect for 1h30 minutes and it turned of and wen I try to turned back looks like it’s going to turn on but I doesn’t can you please have an idea on how to fixed that it’s like it goes on a safe mode or something. Anyway thanks for the video you post that’s really cool to help people like that.
The cleaning liquid is flowing into the glued ribbons from the screen panel (this are orange ribboncables directly from LCD) There is many from this type, and are located on the bottom of the screen, connected to a small pcb on the bottom of the TV, mostly under the speakers, covered with a plate. Disassemble the plate, and search wich glued ribbon is faulty, with switched on tv, try to fine push the ribbon cables to the panel, with a bank cards edge. If the stripes disappears, you have find the faulty piece. you must then make something (rubber stripe or silicone stripe) that continous push the ribbon to the PCB after reassembly.
Where are you from sir
Kosovo
Why?