HOW to make $300 in UNDER 90 Minutes Pressure Washing a Driveway
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2025
- This is the full process video of How I made $300 Pressure Washing a 3-Car Driveway.
Timecodes
0:00 Pressure Washing a Driveway
1:22 Before Pressure Washing Photos
3:52 Searching for a Wrench
5:32 Connect Water Hose to Customers House
6:32 8gpm Pressure Washer Engine On (12:33PM)
7:34 Initial Rinse Before Cleaning Driveway
16:05 Changing DJI Action Camera Battery/Water Break
16:57 NEW GOAL 1000 SUBS
19:38 Filming Pressure Washing Content For Shorts
20:00 Surface Cleaning Driveway
39:22 Rinsing Driveway After Pressure Washing
49:00 Post-Treating Driveway
55:09 Rinse Out 12v Pump
55:57 Disconnect Water Hose from House
57:58 After Pressure Washing Photos
1:01:15 Final Rinse of Concrete Driveway
1:04:50 Pressure Washer Engine Off (1:59PM)
1:05:18 Pressure Washer Hose Reel Up/Wash Hands
1:08:26 Final Walkthrough after Pressure Washing Driveway (LIKE & SUBSCRIBE)
Satisfying video. I always give the customer a plus a hit the street curb. It literally takes about 3 minutes do it with the surface cleanwer
Great transformation! I definitely think you should’ve used a turbo nozzle to do the edging and get all the weeds out, it’s a better cleaner look. The ball value doesn’t really do that much.
Thanks for the tips!
Turbo nozzles give the best results..
Something I’ve learned is to always have some WD-40 and pliers to get hoses off
Great job. Wish I had seen you wand the edges more.
I appreciate you watching! Thanks for the tip.
Do the curve man, stand out! Only takes about 3-5 minutes 👌
Solid Advice Brother!
Turbo nozzle you defintely need to do the edges and blast the weeds out of the cracks in the concrete. And i agree a little more poerful surface cleaner as well.
You don’t do the skirts?
Are you referring to the storm drains?
Question? Where is your camera mounted. Great views you are showing!!
It is a neck mounted camera holder from DJI. It clips on like a big necklace basically. I may switch to a chest mounted camera angle here soon because I am getting a lot of extra sounds from the camera bouncing around and squeaking with this current mount setup.
@PressureWashingPOV i would keep that mount, I just bought one. Your views are awesome. I have the chest, head. The best thing to do is take out your original audio and navigate yours over your videos that will eliminate all your issues. It's more work , however problem solved. Hope this helps
What hose is that your using connected to your Surface Cleaner? Ive been looking for a good and flexible pressure hose that dosent kink or swirl up
Everyone has negatives. Focus on the positive. Here is one, we are not landscapers.
Do you have the lowering mod on your surface cleaner?
I didn’t even know there was a lowering mod, I just have the standard skirt on the 19 inch whisper wash classic.
Was wondering…….. yours will “fly” and mine won’t but I see you’re using the eight GPM and I’m only using the 5.5
@@ridenflorida Yeah I have to weigh down the surface cleaner or it'll just hover. When I built my trailer I went from a little 2.5gpm machine to 8gpm LOL. It was night and day. I appreciate you watching and supporting the channel!
@@PressureWashingPOV I actually misspoke it raises the bar and then you go from 16 or 20° tips to 40°.
If you look up surface cleaner mods on TH-cam, it’ll be one of the first ones that comes up. I’ve been thinking about doing it to mine.
Use your outside voice on your next video.. your soft voice makes it seem like your nervous and don't really know what your doing
Way to many lines still look dirty
No pretreatment?
I usually just post treat after surface cleaning. I don’t like to kick around the pre treat mix with the surface cleaner.
You're the only one I follow who pre wets it. Get tube nozzle cut in then surface cleaner. I feel you can save time and water this way
Why are you making videos saying how much you’re charging? This is why the market is flooded. Be a business owner not a TH-cam celebrity.