Mazda Mazda Remote Programming by Expert Locksmith San Antonio. Need to get a Mazda remote programmed? Try this video or give us a call at: 210-224-1929 expertlocksmit...
Thank You Thank You Thank You!!! I'm so thrilled that I found this video today because I was thinking that I'd never be able to use my remote entry again after I had to replace my broken fob. It took me a couple of tries, had to watch you again and again before I got it right, but I am overjoyed that I finally did it. You're an angel for posting this! 👍
Thank you so much. It works perfectly with Mazda 6 GH (2009; bought in Germany). I failed by programming many times before. You need to turn the ignition on and off 3x and shut and open the door 3x VERY QUICKLY. After that, as you said, some double clicks on unlock and lock buttons - and that's it. Thank you one more time.
Thanks fella , fukn brilliant !! Just did it to my second key Mazda 6 .. Thought was the battery first , Changed that , still wasn't working .Did what you said and worked perfectly . Thanks 👍 👍
My car starts, I have the original keys to the car and they both died so I replaced the batteries and now they won’t work to lock or unlock my car, nothing even responds. When I try this, my car doesn’t enter programming mode. Any idea how to fix this? Mazda 3 2010
My car key was working fine thought I’d change the battery since I’ve done that the unlock and lock button does not work was working fine before I’ve had the battery changed a few times I have tried the instructions in the video but no luck
Thanks for this video. How do you program more than one key at a time? When I program one key, the other one no longer works. Then I program the other key and the one I had previously programmed no longer works. Thanks in advance.
this is only for the car doors, this is NOT the immobilizer that allows the key to start the engine(Transponder Programming)... Apparently this(Transponder Programming) is ONLY able to be achieved if you have TWO original Factory Keys that came with car. Otherwise a Locksmiths scanning/reprogramming tool and services will be required. (Anyone with otherwise expert knowledge feel free to correct me but this is what Ive been able to ascertain).
Do you know the steps if you do have two working keys? I want to create extras cuz my one key is gonna be no more anytime. The spare isn't all that great either. I've just ordered 2 from ebay. Any help would be appreciated. Thanks
I am working on a 2008 Mazda 3. I am trying to program the remotes. I am at a repair shop that lost the remote key. when I do the same procedure you did in the video, after opening and closing the drivers 3x the locks do not cycle to indicate I am in programming mode. I can see the door light on the dash so i know it pick up the open/close signal. if I remove the key or close the door, the lock will cycle 2x to let me know I am exiting programming mode. have you ever seen this issue ?
I did it myself and it worked. But once the spare key is programmed, Original key didn’t work. So then I programmed the Original Key again, then the spare key didn’t worked. Any suggestions?
Body shop broke my request switches on door and trunk so push button start is now disabled. Now they are not taking responsibility. If I have to repair or replace the switches how much would it cost me?
I've programmed a mazda2 key 🔑 It says that the car needs 2 keys to complete the job. I only programmed 1 key . The engine doesn't start. Is that maybe we need to make 2 keys?. Thanks
I cant enter programming mode if turn key 3 times, but when i turn 4 times the central locking will cycler, but i cant program the remote that way. any help?
Hi, i have mazda 3 2006 , two keys both starts the car but only one remote works ,tried to progream the other ,it didn’t !! ,whats the problem ? I brought another fob for mazda 3 from market still didn’t program , i went to lock smith he used a dummy fob ,it did work !!
The ones from Amazon do work. However the Trunk & Panic Buttons are reversed. So I opened up the Remote like changing the battery and reversed the red & black button covers.
Yes Sir, for all Mazda keyed ignition cars that equipped with keyless entry function. (Some older model respond may be a buzz sound, chime -- not lock/unlock the door) . Good luck!
i did this with my 2010 mazda 6. it worked. i have the same fob except mine has the trunk button as well. my problem is just the lock and unlock work. trunk and panic do not work.
If the car doesn't enter to programming mode by lock/unlock respond (older cars may only chime sound) so call the dealership and make sure your car is equipped with a keyless entry function).
This key has a transponder and transmitter (remote). The on board programming is just for the remote for the transponder programming you will need a programmer (locksmith & dealer will have it).
THIS COMMENT IS ABOUT ADDING A KEYLESS ENTRY REMOTE (EITHER A KEY FOB OR THE BUTTONS ON THE KEY), NOT ABOUT ADDING A KEY TO START THE CAR. o-o-o-o If you are having trouble programming the car for a keyless remote because the door locks will not cycle after you close and open the driver’s door 3 times: m.th-cam.com/video/twvXTyqLvF4/w-d-xo.html it is probably because this car never had the Keyless Entry System option. This means that you cannot add a keyless remote to this car. The Keyless Entry System is an optional feature. Look in the owner’s manual and note the asterisk “*” at the bottom of the page for Keyless Entry System. It says “Some models”. Not all cars have the Keyless Entry feature.
The more useless fancy gadgets, the more can go wrong ... AND IT WILL !!! A key should simply be a ... KEY !!! Turn the key on three times, lock the door twice, spin around while whistling Dixie, say 3 Hail Marys ... and AMAZING !! worthless miracle !!!
Thank You Thank You Thank You!!! I'm so thrilled that I found this video today because I was thinking that I'd never be able to use my remote entry again after I had to replace my broken fob. It took me a couple of tries, had to watch you again and again before I got it right, but I am overjoyed that I finally did it. You're an angel for posting this! 👍
Thank you so much. It works perfectly with Mazda 6 GH (2009; bought in Germany). I failed by programming many times before. You need to turn the ignition on and off 3x and shut and open the door 3x VERY QUICKLY. After that, as you said, some double clicks on unlock and lock buttons - and that's it. Thank you one more time.
Thanks !!!
Perfect working solution !
2 remotes programmed within a minute
Continue with your great mission!
Thank you very much for sharing this video 😊 Worked perfectly.
Thanks fella , fukn brilliant !! Just did it to my second key Mazda 6 .. Thought was the battery first , Changed that , still wasn't working .Did what you said and worked perfectly . Thanks 👍 👍
My car starts, I have the original keys to the car and they both died so I replaced the batteries and now they won’t work to lock or unlock my car, nothing even responds. When I try this, my car doesn’t enter programming mode. Any idea how to fix this? Mazda 3 2010
Works great 👍 my dealer were asking for $800
Thiefs
Thank you so much I saved a lot because of this video.. keep on helping others
My car key was working fine thought I’d change the battery since I’ve done that the unlock and lock button does not work was working fine before I’ve had the battery changed a few times I have tried the instructions in the video but no luck
Thank you !
Thanks for this video. How do you program more than one key at a time? When I program one key, the other one no longer works. Then I program the other key and the one I had previously programmed no longer works. Thanks in advance.
This worked great thanks for this
Very nice I just program my New Mazda 5 very helpful 🙏🏻🙏🏻🙏🏻
Thank you so much for video. Helped me out.
this is only for the car doors, this is NOT the immobilizer that allows the key to start the engine(Transponder Programming)... Apparently this(Transponder Programming) is ONLY able to be achieved if you have TWO original Factory Keys that came with car. Otherwise a Locksmiths scanning/reprogramming tool and services will be required. (Anyone with otherwise expert knowledge feel free to correct me but this is what Ive been able to ascertain).
Kinda sucks it works that way but it’s a good thing tho
Do you know the steps if you do have two working keys? I want to create extras cuz my one key is gonna be no more anytime. The spare isn't all that great either. I've just ordered 2 from ebay. Any help would be appreciated. Thanks
Thank you so much, it worked on my new key!
Thanks !!
Thanks it also work for the Mazda CX-9 2012 I suppose it also work the same for the Mazda cx7, cx5 cause the have the same control
I am working on a 2008 Mazda 3. I am trying to program the remotes. I am at a repair shop that lost the remote key. when I do the same procedure you did in the video, after opening and closing the drivers 3x the locks do not cycle to indicate I am in programming mode. I can see the door light on the dash so i know it pick up the open/close signal. if I remove the key or close the door, the lock will cycle 2x to let me know I am exiting programming mode. have you ever seen this issue ?
same thing ! what was the problem ? I close the door afther 3X doing that and the all locks cycle 3x and thats all ..
You’re a Legend!
wanted to do the programming on my Mazda5 car on km 100 but I forgot the procedure
Tried many times after key battery replacement, key lights when pressed but central lock doesn't respond
have you fixed it and how?
cool video!
so how many keys and key fobs can be programed for a 2010 mazda5?
I did it myself and it worked. But once the spare key is programmed, Original key didn’t work. So then I programmed the Original Key again, then the spare key didn’t worked. Any suggestions?
I have the same problem...
Body shop broke my request switches on door and trunk so push button start is now disabled. Now they are not taking responsibility. If I have to repair or replace the switches how much would it cost me?
After programming the remote, the red light keep flashing but vehicle dont start
It worked thank you . But the trunk isn’t opening with the remote….
Worked. Thank you
It 100% work for me
Thanks you so much
I've programmed a mazda2 key 🔑
It says that the car needs 2 keys to complete the job. I only programmed 1 key . The engine doesn't start.
Is that maybe we need to make 2 keys?.
Thanks
I did that, it just lock and unlock but remote still not working
Is the technique the same the 2010 Mazda 6?
Bought a used 07 mazda cx7 that only one key fob, got 2 more fobs from a junk yard, can reprogram these fobs to work on my cx7?
On my mazda 2009 dont work any suggestion?
Thanks!!! Dealership wants 100.00 for this
On my mazda 5, nothing happens when I press the unlock button twice after the 1st closing cycle, I don't know what the problem is🤔
Thank you.
OK, now let's see you start the car.
I cant enter programming mode if turn key 3 times, but when i turn 4 times the central locking will cycler, but i cant program the remote that way. any help?
Hi, i have mazda 3 2006 , two keys both starts the car but only one remote works ,tried to progream the other ,it didn’t !! ,whats the problem ? I brought another fob for mazda 3 from market still didn’t program , i went to lock smith he used a dummy fob ,it did work !!
I did it with mine but lock wdnt throught the cycle but i think i messed up innthe end. Now it wont go in to the cycle...
Very good job thanks for sharing
Mine never does the lock/unlock thing and I’m not too sure why
This worked on my mazda 3 2008.. why is it there is no beep sound when locking and unlocking?
Will any of the fobs from Amazon work with this? Obviously one that matches what my key looks like.
The ones from Amazon do work. However the Trunk & Panic Buttons are reversed. So I opened up the Remote like changing the battery and reversed the red & black button covers.
Thank.you for good video. All mazda car programming same? my car mazda 8
Yes Sir, for all Mazda keyed ignition cars that equipped with keyless entry function. (Some older model respond may be a buzz sound, chime -- not lock/unlock the door) .
Good luck!
Thanks so much!!
i did this with my 2010 mazda 6. it worked. i have the same fob except mine has the trunk button as well. my problem is just the lock and unlock work. trunk and panic do not work.
Not mine.. The key don't work after the lock unlock of the door
@@coloredbiker5646 like to start the car?
Many thanks 👍
Doesn't work with my 2006 mazda what else could be wrong if it isn't that, fob lights up, its had a new battery too
Carl Brandom dealership
Thanks
worked for me thanks
Thanks much.
I have a mazda bt50 2017 model but doesn't work on it, any clue?
how to delete my keyless entey i have program 2 cars with same key and when i open one both open now
💐 thank you sir 👍🏻
My remote works one day and then it doesn’t and the car makes that ringing noise when I open the drivers door what do you think is wrong ?
Hello, I did that same procedure but my remote control does not open or close the doors, what could it be?
What's your car year make and model?
@@expertlocksmithsanantonio4338same thing my I did the same process many times and doesn’t work HELP
Doesn't work for me ? What should I do ???
Dos it works for Mazda 3 2010?
What if you only have a key with a chip, no key fob
Done this. key not working. :(
Does this work on 2014?
I do the same procedure but the cycle does not enter, which could be the reason why it does not enter?
If the car doesn't enter to programming mode by lock/unlock respond (older cars may only chime sound) so call the dealership and make sure your car is equipped with a keyless entry function).
Also works for mazda 3 BK 2006?
thanks!!!!
👍
Dealer wanted 450. With a 40 dollar aftermarket key and TH-cam video later and i respectfully told them no
this worked but my key won't start the car. What could be wrong?
This key has a transponder and transmitter (remote). The on board programming is just for the remote for the transponder programming you will need a programmer (locksmith & dealer will have it).
Didn't work on my Mazda 2.
Funktioniert bei Meinem XR3 Leider nicht.....
When I double-press on the unlock button, nothing happens. Anyone got an idea why?
Same problem ,did you find an answer ?
❤🎉😊
Will it work on a 2014 Mazda 2 Touring?
Misleading video. This method does not start the car or it will make the original key not work.
You right, this method is "Mazda remote programing". To stat the car you need to program the transponder with a programmer.
אתה ישראלי נכון
THIS COMMENT IS ABOUT ADDING A KEYLESS ENTRY REMOTE (EITHER A KEY FOB OR THE BUTTONS ON THE KEY), NOT ABOUT ADDING A KEY TO START THE CAR.
o-o-o-o
If you are having trouble programming the car for a keyless remote because the door locks will not cycle after you close and open the driver’s door 3 times:
m.th-cam.com/video/twvXTyqLvF4/w-d-xo.html
it is probably because this car never had the Keyless Entry System option. This means that you cannot add a keyless remote to this car.
The Keyless Entry System is an optional feature. Look in the owner’s manual and note the asterisk “*” at the bottom of the page for Keyless Entry System. It says “Some models”. Not all cars have the Keyless Entry feature.
Hola puedes escribir los pasos detallados por favor
I have Mazda 6 but 🗝️ Duplicate key required00968 99418576
The more useless fancy gadgets, the more can go wrong ... AND IT WILL !!! A key should simply be a ... KEY !!!
Turn the key on three times, lock the door twice, spin around while whistling Dixie, say 3 Hail Marys ... and AMAZING !! worthless miracle !!!
WTF U STOLEN MISS ANNA'S CAR XDDDDD
You just repeated yourself over and over without saying anything.
Couldn't explain worse than that!!!! What were you showing, your steering wheel?!
Does it work on Mazda bt50 2009?
Thanks !!!