This video will cover the replacement of the center console trim for an Audi B9/9.5 Product: bit.ly/3LFwzBi
ความคิดเห็น • 33
4 หลายเดือนก่อน +2
This is a tremendously helpful video. Thank you so much! A couple of observations for anybody else attempting: (1) As JonathanU said, do not try and pry off the black trim piece without taking off the plastic undertray to which it is attached. The reason is because not only is the trim attached by clips but also by screws. It is impossible to remove the trim otherwise! (2) The undertray attaches to the center console through six metal clips. When you pry off that piece most if not all of the clips will likely fall off the plastic tabs they are attached to. On the left side middle, that clip may be stuck inside the connection hole. To get it out just pull out the side trim facing the driver's right leg (left hand drive) and use a small screwdriver to push it out. Reattach all six clips to the long plastic tabs and you should be good to go.
Great video! The B9 SQ5 console is extremely similar to this, so your video helped me be sure I was pulling on the correct things in the correct spots when doing my 2023 SQ5.
I have a '22 S5 Cabriolet. I ordered the trim piece a long time ago but it has just been sitting around. On the Cabriolet, the little pocket that you lift up the rubber mat from to access the very first screw you remove, is not there. Instead that is where the controls for the convertible top are located. I cannot find any information on how to go about removing those controls so that I can remove the rest of the console and install the new trim. Any suggestions?
Hmmm…I thought the convertible controls were up by the rear view mirror. Is everything else the same? If so have you tried prying off that section? It might be the same. If you can attach a picture of it maybe I can help.
I dunno, although the piano black is a pain to keep clean and in good shape, going with carbon fiber has too little contrast imo. I think a satin finish black or maybe some fine black woodgrain would be a bit more elegant looking. I do like the carbon fiber in the stock interior but it needs to be broken up.
This is a tremendously helpful video. Thank you so much! A couple of observations for anybody else attempting: (1) As JonathanU said, do not try and pry off the black trim piece without taking off the plastic undertray to which it is attached. The reason is because not only is the trim attached by clips but also by screws. It is impossible to remove the trim otherwise! (2) The undertray attaches to the center console through six metal clips. When you pry off that piece most if not all of the clips will likely fall off the plastic tabs they are attached to. On the left side middle, that clip may be stuck inside the connection hole. To get it out just pull out the side trim facing the driver's right leg (left hand drive) and use a small screwdriver to push it out. Reattach all six clips to the long plastic tabs and you should be good to go.
Yes, thank you for adding those details. I realized there were six at a later time. Glad to be of help!
Great video! The B9 SQ5 console is extremely similar to this, so your video helped me be sure I was pulling on the correct things in the correct spots when doing my 2023 SQ5.
Glad to hear that! Thank you.
Got my dad one for Father’s Day, thanks for the video
That’s awesome! Happy to help!
Thanks for this video!
I've been looking for a source to help me remove the black glossy piece so I can wrap it in matte carbon fiber
Glad to be of help!!! Good luck!
Great video. This is a 30-45 min job.
Appreciate it! Yeah that sounds about right, but it can def be done in 20min.
Great video man. Thanks for doing this. Installing mine this weekend.
Awesome :) Glad to help! Wishing you an easy install
Went smooth as silk man!
@@davewes69Glad to hear!
do you know if the B9 trim piece is the same as B9.5, I have 2023 b9.5 but would like to put a non shiny piece from a B9?
Yes, it will work. Mine is a 9.5 as well. 2022 RS5 here!
Thanks for the video, really helpful !
Glad to hear!! :)
did you go with glossy or matte?
@@AndrewTa530This one is the glossy carbon fiber
Where did you buy that
@@anthonyzapata4461 Link under video but here you go :) - bit.ly/3LFwzBi
Where you get Alcantara shift knob?
It’s OEM from the RS6 or RS7.
I have a '22 S5 Cabriolet. I ordered the trim piece a long time ago but it has just been sitting around. On the Cabriolet, the little pocket that you lift up the rubber mat from to access the very first screw you remove, is not there. Instead that is where the controls for the convertible top are located. I cannot find any information on how to go about removing those controls so that I can remove the rest of the console and install the new trim. Any suggestions?
Hmmm…I thought the convertible controls were up by the rear view mirror. Is everything else the same? If so have you tried prying off that section? It might be the same. If you can attach a picture of it maybe I can help.
Hey, there isn't any screw unter the controls, Just Pop the whole trim Up.
Where did you find this carbon trim piece?
EuroZoneTuning.com link to item is in description
It says out of stock.
I know they make them in small batches so keep an eye out for one. You can also email them
I dunno, although the piano black is a pain to keep clean and in good shape, going with carbon fiber has too little contrast imo. I think a satin finish black or maybe some fine black woodgrain would be a bit more elegant looking. I do like the carbon fiber in the stock interior but it needs to be broken up.
It’s a basically a race car. Carbon fiber is the way to go for the RS5 without a doubt. If you have an A5 or S5 I agree.