Pro Boat SONICWAKE V2 36 - So much fun so little batteries.. !! 4K UHD

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 ม.ค. 2025

ความคิดเห็น • 27

  • @Lifted420haze
    @Lifted420haze ปีที่แล้ว +1

    I absolutely love this boat. I have the black one, the green Impulse 32, and just got an Oxidean Marine Mini Dominator. 😊

    • @ArcticRc
      @ArcticRc  ปีที่แล้ว

      Yeah i really enjoy these boats. Gotta get som faster ones. I guess uograding the esc lets me use 8 cell as well.

  • @theadmirer_
    @theadmirer_ ปีที่แล้ว +1

    Nice video so cool! Glad i found this channel, best regards from Sweden

    • @ArcticRc
      @ArcticRc  ปีที่แล้ว +1

      Thank you for that nice comment sir

  • @marklawson8996
    @marklawson8996 หลายเดือนก่อน +1

    If it was that cold out, what do you think the water temperature is there?

    • @ArcticRc
      @ArcticRc  หลายเดือนก่อน

      at this time about 6-7 degrees Celsius

  • @berrymucuckiner4890
    @berrymucuckiner4890 ปีที่แล้ว +1

    I use 2-3s 5200mah 120c zee packs.
    That’s a “supposedly” 10,400mah and I only get 3-1/2-4mins of run time. Batteries are still hit too.

    • @berrymucuckiner4890
      @berrymucuckiner4890 ปีที่แล้ว

      Hot*

    • @Paufit
      @Paufit 10 หลายเดือนก่อน

      two 3S in series are a total of 5200mah

  • @JoaoPaulo-pb9zv
    @JoaoPaulo-pb9zv ปีที่แล้ว +1

    Hello, i m having problems with mini sonicwke v2 and the retailer says that the problem are the batteries. My batteries are Gens Ace 3s 5000 mha 60c. If you could confirm that the esc is the firma 120a i would bemuch appreciated. Nice video enjoy this awesome boat.

    • @berrymucuckiner4890
      @berrymucuckiner4890 ปีที่แล้ว

      Stock esc is 120A firma

    • @JoaoPaulo-pb9zv
      @JoaoPaulo-pb9zv ปีที่แล้ว

      Ok thanks a lot, so Proboat s retailer in Potugal says the problem i have with my sonicwake v2 is due to the batteries, nonsense... and this video you made its the prouve they are making escuses not to solve the real problem.

    • @JoaoPaulo-pb9zv
      @JoaoPaulo-pb9zv ปีที่แล้ว

      Hello again, i have seen several reviews and oppinions about the awful delay response especially on the throtle on this spektrum slt 3 transmiter compared with the Dx2 and Dx2e. In your case did you noticed that delay? Thanks

    • @JoaoPaulo-pb9zv
      @JoaoPaulo-pb9zv ปีที่แล้ว

      Having seeo and heard so many oppinions about the slt 3 radio transmiter i think i found the culprit of all my problems and the terrible delay in throtle response, so i wonder if in your case you noticed that same delay. Needless to say mine its not defective,from what i heard that slt 3 is crap, and i will swap with a tactic that i have laying around , much better radio.

    • @ArcticRc
      @ArcticRc  ปีที่แล้ว

      Well i haven't had any issue with mine but im gonna get the DX5 for this one with telemetry.

  • @am12eaz93
    @am12eaz93 4 หลายเดือนก่อน

    Spectrum esc require good quality batteries that don't have much voltage sag...all of your cheap zee lipos and amazon lipos will not suffice and you will get crap runtimes. I switched to gensace 6800 3s 120c lipos and I don't have the crap runtimes or the cutoff kicking in too early.

  • @robsycko
    @robsycko ปีที่แล้ว +3

    Use 2 3 cell batteries In series

    • @ArcticRc
      @ArcticRc  ปีที่แล้ว +1

      I use 6 cell and a jumper. That is what i got for the moment and some big 4 cell.

  • @trondarntsen4457
    @trondarntsen4457 ปีที่แล้ว +1

    Når skal du kjøre med rc bilen da?

    • @ArcticRc
      @ArcticRc  ปีที่แล้ว

      Den e total havarert...

  • @berrymucuckiner4890
    @berrymucuckiner4890 ปีที่แล้ว +1

    Just plug in 2 of your 4 cell batteries for 8-cells
    Problem solved 😂

    • @ArcticRc
      @ArcticRc  ปีที่แล้ว

      That would burn up my esc and perhaps the motor as well

  • @Wazza722
    @Wazza722 7 หลายเดือนก่อน +1

    Totally incorrect way to tighten the hatch down!

    • @ArcticRc
      @ArcticRc  7 หลายเดือนก่อน

      What is the correct way Sir?

    • @baddriving3966
      @baddriving3966 5 หลายเดือนก่อน

      @@ArcticRc I think he means that you do opposite corners half way - then the other two corners and then tighten them all - just keeps the canopy squared up so that the seal works all the way round - but not a biggie :)
      Biggest issue is that the black rubber grommet that supports the stuffing tube melts (I think they just used the same one that seals the stuffing tube through the hull. Simple fix - replace the black grommet with either silicone tube or I prefer using 4 green O rings (the ones used on car AC systems) - end of the problem. Also make sure that the clamp arrow is pointing forward or it will misalign the tube and shaft.

  • @robsycko
    @robsycko ปีที่แล้ว +2

    It looks like a traxas spartan copy

    • @Lifted420haze
      @Lifted420haze ปีที่แล้ว +4

      Then why is it soo much better 😅