А я в итоге остановился на корпусе Cooler Master MasterBox NR200P. Тоже красивый и классный, но немного больше, там можно впихнуть 2 водяных радиатора, да и в целом он более продуваемый. При этом он по прежнему влазит в мой большой рюкзак! В общем топ мини корпус для мощного пк с большим тепловыделением, осталось только дождаться когда приедет всё железо и приблуды для водянки
NR200P очень продуманный корпус. Он не подходил мне по внешнему виду, да и большеват он - 18.5 литров против 13 у Jonsbo V11. Но по функционалу эти корпуса даже и сравнивать нечего. Я теперь целюсь на SLIGER SV590 V2. Все те же 18 литров, но уже с поддержкой 360мм водяного охлаждения. Удачи со сборкой!
@@gorodnov ещё кстати погляди на Braveman ZZAW B6. Тоже очень красивый, тоже с хорошей продуваемостью и с возможностью поставить водянку, правду 2-х секционную, но при этом он на 14л К сожалению поздновато его увидел, так мож сам отказался от идеи с водянкой на видюшке и купил такой корпус
This will definitely do the trick. I didn't go with this option because NH-L12 Ghost S1 Edition with 25mm fan on top will be 91mm high compared to 72mm Black Ridge. It simply doesn't fit my case.
@@gorodnov Dam and that case is still a THICK boy. I'm trying to build my own case like the Skyreach mini ATX version, but it has to be console style. Im torn between, 2 a12x15s, or 1 nf-a9x14 + a12x25s. that 1cm will matter alot, but dude my 12600k runs hot lol! I think it might be worth the sacrifice to go with the thick boy.
The original one, ID-Cooling, basically is not capable of handling this CPU under full load when case-restricted. And Jonsbo V11 has a very poor airflow design. So believe me these numbers are accurate. Those coolers are basically from different leagues. You can check out other videos about Alpenfohn heatsink + Noctua fans combination to see how really good it is.
@@killersberg1 hmmm, could be difference from case-to-case. My Jonsbo V11 cannot be called a case with a good airflow, so maybe second fan helps to push air masses away from the CPU.
@@killersberg1 I'm using a 92 Noctua + 12mm 120mm fan on my blackridge on 11900k. That extra 120fan gives me the option to able to run the 11900k with 4.8 (all core turbo, w/ undervolt) case is k39v3
Hi, You need to verify I/O and M.2 slot heatsink dimensions as well as your RAM height. At first glance I'd say it will probably fit but you'll have to remove M.2 slot heatsink.
А я в итоге остановился на корпусе Cooler Master MasterBox NR200P.
Тоже красивый и классный, но немного больше, там можно впихнуть 2 водяных радиатора, да и в целом он более продуваемый.
При этом он по прежнему влазит в мой большой рюкзак!
В общем топ мини корпус для мощного пк с большим тепловыделением, осталось только дождаться когда приедет всё железо и приблуды для водянки
NR200P очень продуманный корпус. Он не подходил мне по внешнему виду, да и большеват он - 18.5 литров против 13 у Jonsbo V11. Но по функционалу эти корпуса даже и сравнивать нечего.
Я теперь целюсь на SLIGER SV590 V2. Все те же 18 литров, но уже с поддержкой 360мм водяного охлаждения.
Удачи со сборкой!
@@gorodnov ещё кстати погляди на Braveman ZZAW B6.
Тоже очень красивый, тоже с хорошей продуваемостью и с возможностью поставить водянку, правду 2-х секционную, но при этом он на 14л
К сожалению поздновато его увидел, так мож сам отказался от идеи с водянкой на видюшке и купил такой корпус
@@Adranora он не ставится вертикально, а мне пока заходят только вертикальные корпуса.
@@gorodnov на вкус и цвет))
@@Adranora абсолютно согласен)
Awesome. Imma try that config on my L12 Ghost, but the x25 on top
This will definitely do the trick. I didn't go with this option because NH-L12 Ghost S1 Edition with 25mm fan on top will be 91mm high compared to 72mm Black Ridge. It simply doesn't fit my case.
@@gorodnov Dam and that case is still a THICK boy. I'm trying to build my own case like the Skyreach mini ATX version, but it has to be console style.
Im torn between, 2 a12x15s, or 1 nf-a9x14 + a12x25s. that 1cm will matter alot, but dude my 12600k runs hot lol! I think it might be worth the sacrifice to go with the thick boy.
@@brushrunner If you're still considering case options, then look at Sliger SV590. It supports 360mm liquid cooling.
To shave off 20c from those coolers, you had to be doing something wrong with the original one. And no, it's not the thermal paste.
The original one, ID-Cooling, basically is not capable of handling this CPU under full load when case-restricted. And Jonsbo V11 has a very poor airflow design. So believe me these numbers are accurate. Those coolers are basically from different leagues. You can check out other videos about Alpenfohn heatsink + Noctua fans combination to see how really good it is.
Using two Fans on the blackridge hurts thermal performance. If you use a 120mm fan please remove the 92mm one.
Well, 92mm fan actually shaves off a couple more degrees.
@@gorodnov I have seen another review where using 92+120 was better than only 92 but using only 120 was better than both.
@@killersberg1 hmmm, could be difference from case-to-case. My Jonsbo V11 cannot be called a case with a good airflow, so maybe second fan helps to push air masses away from the CPU.
@@gorodnov Yes that makes sense to me.
@@killersberg1 I'm using a 92 Noctua + 12mm 120mm fan on my blackridge on 11900k. That extra 120fan gives me the option to able to run the 11900k with 4.8 (all core turbo, w/ undervolt) case is k39v3
Heyyy will the black ridge fit a asus x570-i itx motherboard?
Hi,
You need to verify I/O and M.2 slot heatsink dimensions as well as your RAM height. At first glance I'd say it will probably fit but you'll have to remove M.2 slot heatsink.