ARRMA 1/8 TYPHON 4X4 3S BLX BUGGY'S BRUSHLESS MOTOR REPLACEMENT

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ก.ย. 2024
  • 3674 2650KV Sensorless Brushless Motor 5mm Rotor Shaft and 120A Brushless ESC Programming Card Motor ESC Combo Set for 1/8 RC Car Truck from amazon
    #Arrma
    #arrmabuggygearboxtroubleshooting
    #WLtoys144001modificationgroup
    #WLtoys144001
    #rccarmodificationgroup
    #WLtoys124019
    #WLtoysupgrade
    #Redcat
    #Tornado
    #10ScaleBrushlessBuggymodificationgroup
    #RedcadTornadoEPXPRO
    #BrushlessBuggymodification
    #Rclab
    #KyoshominiZAWD

ความคิดเห็น • 48

  • @SpeedSyko
    @SpeedSyko 3 ปีที่แล้ว +2

    I was at the hobby shop yesterday and they had me swap out the motor and esc 5x for testing. By the 5th time I had it down in 45 seconds. Very easy setup! Props to Arrma. Love the telescoping drive shaft! I bought this for a I don’t care basher buggy. Highly recommend!

  • @jeffreybarton3014
    @jeffreybarton3014 2 ปีที่แล้ว +2

    Nice thanks. Buying this car and I wanted see what I'm in for when I upgrade immediately because I can't leave stuff alone apparently

  • @samjoseph4413
    @samjoseph4413 3 ปีที่แล้ว +2

    Very helpful...

  • @jacobsparks4419
    @jacobsparks4419 ปีที่แล้ว +1

    Awesome video! Now you gotta get rid of that deans plug lol

  • @bobbysimpson5540
    @bobbysimpson5540 4 ปีที่แล้ว +1

    Thanks for posting I was in need of doing this.

  • @alfarabi1288
    @alfarabi1288 3 ปีที่แล้ว +1

    Thinks for the video...👌

  • @fxriya6121
    @fxriya6121 3 ปีที่แล้ว

    Wow...nice

  • @ParaDise-uk2cb
    @ParaDise-uk2cb 3 ปีที่แล้ว

    Wow

  • @silverfoxmckeand1125
    @silverfoxmckeand1125 2 ปีที่แล้ว

    How was that so easy to get the drive shaft out? I'm having a hell of a time

  • @SpeedSyko
    @SpeedSyko 3 ปีที่แล้ว +1

    Ali’s I have a free or under 10$ fix for steering slop. I will mak a video. Basically you chand all linkage ends to Traxxas an use the meta ball ens. Then use a 1/10th wheel ship, put it on top of the the pins for the steering bulk heed.under the mount holding the bulk head pins. No slop at all! Hope this helps. I will post this when I get parts numbers and a video of doing this. By by by rpm.

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      thank you, please knock me when you video’s live

    • @SpeedSyko
      @SpeedSyko 3 ปีที่แล้ว

      @@k81rclab42 no problem! Thanks!

    • @fbiagent3399
      @fbiagent3399 3 ปีที่แล้ว

      @@SpeedSyko I've done the traxxas link mod with the metal eye balls and I can definitely say night and day difference.. almost no slop at all

  • @Poppasmurf757
    @Poppasmurf757 3 ปีที่แล้ว +2

    I have to ask when u did that did u have to change the esc

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว +1

      i didn’t change the ESC , but soon i am going to change it for another experiment

    • @Poppasmurf757
      @Poppasmurf757 3 ปีที่แล้ว

      @@k81rclab42 and also was there a big speed difference

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      @@Poppasmurf757 no, almost same even little bit less speed, i replace original arrma motor , because its become very hot with truck tires, but with that replacement motor it’s become warm sometimes hot, you can check my another brushless 1/8 motor replacement that motor it’s perfect

  • @overbuiltautomotive1299
    @overbuiltautomotive1299 2 ปีที่แล้ว +2

    why would that need that big of an esc i got an 80 amp 50.00 hobby king 3665 motor ebay thing esc in a sct and its barley controllable on 2s lol

    • @Playboyer670
      @Playboyer670 2 ปีที่แล้ว +1

      Because your sct is likely a 1/10th scale and the arrma is a 1/8th scale that is bigger and heavier.

  • @mitchellbrown4421
    @mitchellbrown4421 3 ปีที่แล้ว +1

    I had done this but it lost quit a bit of power then when my original moter was working but it seems I did every thing right did u notice any power lose?

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      yes , it’s loose power, if you need more speed, you must have to change motor pinion, 2nd you have make a good combination with 4s lipo with ESC ( if you use a 4s lipo plz make sure the esc temperature is okay , if it’s over heated you have to replace it) and also wheels, if you use the original wheel ( come with this typhon ) maybe it’s less speed, and motor temperature will be okay or you use any other big diameter truck wheels , you will have hi speed and motor/ esc will be warm/ hot you know what i mean, if you like my work, please subscribe my channel, and also like my fb page “ RC LAB “ thank you ,

    • @RayRiv73
      @RayRiv73 2 ปีที่แล้ว

      You need to run 4s to see increase power with this setup. The KV on the motor is less than the stock one so it requires more volts to get that rpm going.

  • @Piaspeedy
    @Piaspeedy 2 ปีที่แล้ว +2

    i have a question. does a 1/9 motor fit?

    • @k81rclab42
      @k81rclab42  2 ปีที่แล้ว +1

      1/8 is okay , i never try with 1/9

    • @Piaspeedy
      @Piaspeedy 2 ปีที่แล้ว

      1/8 i suck at typing

    • @Piaspeedy
      @Piaspeedy 2 ปีที่แล้ว

      But does 1/9 exist?

    • @k81rclab42
      @k81rclab42  2 ปีที่แล้ว +1

      @@Piaspeedy 2-5 mm big diameter !!! and u have to setup the gear box carefully, it’s gone be a little tight

    • @Piaspeedy
      @Piaspeedy 2 ปีที่แล้ว +1

      @@k81rclab42 ok

  • @riffraff9070
    @riffraff9070 ปีที่แล้ว

    How’s it so cleab

  • @bashaz8559
    @bashaz8559 3 ปีที่แล้ว +1

    How did the 3674 hold up with the 120amp esc? Is this a surpass can? 20tooth? Thanks mate

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      thank you dude, i didn’t change pinion gear or spur gear it was with this buggy, i use 2 type motor for experiment, please check the link , if you like please subscribe my channel GoolRC Original S3670 2850KV 4 Poles Brushless Sensorless Motor for 1/8 1/10 RC Car Truck www.amazon.com/dp/B07Q9Q9XCG/ref=cm_sw_r_cp_api_glt_fabc_XWM7FRVFAGCJXBC1B2JF?_encoding=UTF8&psc=1

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      this motor is did very good job, high kick , no heating issue, but its slower then other original n 2nd motor 3674 2650KV Sensorless Brushless Motor 5mm Rotor Shaft and 120A Brushless ESC Programming Card Motor ESC Combo Set for 1/8 RC Car Truck www.amazon.com/dp/B08513L841/ref=cm_sw_r_cp_api_glt_fabc_G99Y13P01NR15PZEBJFR?_encoding=UTF8&psc=1

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว +1

      2 big motor can do this all day ;) th-cam.com/video/3XSquNBOqG4/w-d-xo.html

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      @@smperkins410 i saved money for next RC :) , thank you

    • @Playboyer670
      @Playboyer670 2 ปีที่แล้ว +1

      @@k81rclab42 so which one is faster the 3674 2650kv or the s3670 2850kv?

  • @fkuleva6475
    @fkuleva6475 3 ปีที่แล้ว

    Can I slap a bigger motor and esc without upgraded any parts?

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      sorry, i don’t understand your question?

    • @Phil_4young
      @Phil_4young 3 ปีที่แล้ว

      Ya. You may have eventual part breakages depending on how you drive and how much power you run. I've been running a 3674 2650kv motor with a 120 amp ESC on 4s in my Arrma Granite for over a year now. I think I have to get a new motor and receiver now.

  • @juanochoa266
    @juanochoa266 3 ปีที่แล้ว

    Doea that spur gear mod 1

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      i’m sorry, i don’t understand your question?

    • @gonzodetroitify
      @gonzodetroitify 3 ปีที่แล้ว +1

      @@k81rclab42what pitch is spur gear

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      @@gonzodetroitify 48p

    • @fbiagent3399
      @fbiagent3399 3 ปีที่แล้ว

      @@k81rclab42 How many teeth?? My typhon has the hot racing 91t... and i ordered A same size motor but 2850Kv with A hobbywing 120A 2/4s esc... And I'm ganna run A 3s lipo... But I don't know what Pinion gear would give me great speed.. my motor mount only takes 15/16/17/27

    • @k81rclab42
      @k81rclab42  3 ปีที่แล้ว

      @@fbiagent3399 thank you my friend, in this video everything is stock spur gear and pinion gear, i just change the motor and wheels , because the stock motor becomes very hot for this big truck wheels it’s may burn with in 5-7 minutes, that big motor is less speed but high torque with 3s 5500mah lipos, after 10-15 minutes bashing or wheelie that motor just worm, and that is what i did what that buggy , this project is not for speed run, if i use hi speed motor and gears on that 3s typhon, i believe it will breaks every time, thats is why i spends very cheap motor,
      you buy excellent motor combo, my friend first try with stock pinion try some run then go for higher 1 or 2 pin notice the motors/ esc / battery (i don't know what tire are you using because , same setup with big tires make a huge difference ) temperature then make your own diction.
      my advice don’t hurt or kill your rc car i love speed run plz post a video on my page ''facebook.com/KhaledsRCLab''
      all of your experience and experiment please join my page ''RC LAB''also please subscribe my channel and support me