Custom Scooter battery Activator

แชร์
ฝัง
  • เผยแพร่เมื่อ 24 ธ.ค. 2024

ความคิดเห็น • 112

  • @CurlyScott89
    @CurlyScott89 4 ปีที่แล้ว +6

    10kwh of these just showed up today. Excited for the powerwall video to come out!

  • @edbloom4897
    @edbloom4897 4 ปีที่แล้ว +5

    YAHOO!!! Three just ordered. Now to work out a transformer or buck converter box to drop 3.5kWh @ 37v DC to 13.8v DC for my Amateur Radio setup. 4 radios, two tuners, 2 Pis and currently 1 12v DC HDMI monitor. Only one radio transmits at a time so when idle in receive mode, only 600mA to 2A per rig (when signal present) draw (2 @ 600 & 2 @ 2A) plus 5A x 2 PIs and the 1.5-ishA for the monitor. 16.7-ishA draw while on & monitoring.

  • @ngiordano75
    @ngiordano75 3 ปีที่แล้ว +2

    I bought the 36v Ninebot battery. I'm impressed. It came already blinking. The controller I hooked it up to drained it overnight for some reason. Thanks to this video I woke it back up. New controller on the way. Definitely going to tryout some of his other products. You're the man @jehugarcia

  • @truetech4158
    @truetech4158 4 ปีที่แล้ว +5

    Custom Scooter battery Activator would make a cool name for a band, either that or Oscar Goldman's Briefcase.

  • @Nicknack503
    @Nicknack503 4 ปีที่แล้ว +2

    Just order my batteries and activators. So excited!

    • @bjrngunnarsson4729
      @bjrngunnarsson4729 4 ปีที่แล้ว +2

      Nice!🙂🙏

    • @lizbell4861
      @lizbell4861 3 ปีที่แล้ว

      Is the etsy store still open? I cant find it

    • @latymz
      @latymz 3 ปีที่แล้ว

      @@lizbell4861 He has moved to a different site after they closed his account there.

  • @Sirus20x6
    @Sirus20x6 4 ปีที่แล้ว +12

    the microcontroller uses so little power that it can coast on the capacitors for 5 seconds or so. that's why the off switch takes so long to turn off. I didn't put in a power led because I didn't want vampire draw. for the next batch there will be an optional one

    • @CurlyScott89
      @CurlyScott89 4 ปีที่แล้ว +1

      Thanks for that. Parasitic draw is what I was worried about

    • @Sirus20x6
      @Sirus20x6 4 ปีที่แล้ว +2

      @@CurlyScott89 with the switch in the off position it won't use any power. in the on position i't s a few milliamps. An LED would actually double or triple the current use of the activator.

    • @ronaldharris6569
      @ronaldharris6569 3 ปีที่แล้ว

      Kool but leave the option for no led I like the idea that off means off with no parasitic draw

    • @Over_50s_DIY_Vanlife
      @Over_50s_DIY_Vanlife 3 ปีที่แล้ว

      @@Sirus20x6 - Any updates on the availability of your activators - I placed an order on 1/12 and Etsy now says your account is inactive 😢

    • @Sirus20x6
      @Sirus20x6 3 ปีที่แล้ว +3

      @@Over_50s_DIY_Vanlife Etsy closed my account yesterday without warning or notice. I'm trying to work with them to find out what happened. So far they have not communicated back to me. luckily I have the addresses and orders of everyone that has already placed their order so they will go out without delay. the next batch of 50 boards comes in friday, and then the next a day or three after that and another day or two for the next 50. This really sucks because it makes it really hard to send tracking info and everything, but I promise I haven't disappeared. I'm thinking of setting up a Tindie account to continue sales until I can get things squared away with etsy.

  • @klausnielsen1537
    @klausnielsen1537 4 ปีที่แล้ว +1

    Sweet! No black smoke! And Cheap.

  • @lizbell4861
    @lizbell4861 3 ปีที่แล้ว +2

    The wtsy store is closed. Is it still available?

  • @deanda1984
    @deanda1984 3 ปีที่แล้ว +2

    Dude, you are the man!

  • @billkelley1902
    @billkelley1902 4 ปีที่แล้ว +1

    Yay!

  • @swormser865
    @swormser865 3 ปีที่แล้ว +1

    How do we find out when more will be available ?

  • @qdubu
    @qdubu 4 ปีที่แล้ว +1

    will one activator work with charging multiple batteries at once? Or do we need one for each?

    • @jehugarcia
      @jehugarcia  4 ปีที่แล้ว +1

      Yes you can parallel multiple

  • @Dimrain13
    @Dimrain13 4 ปีที่แล้ว +3

    Damn you sold out of those, guess I should have just ordered them when I had the chance. I should say... there are only 26 left and I need 40 so might as well be sold out. Are you getting more in or should I look elsewhere for batteries?

    • @jehugarcia
      @jehugarcia  4 ปีที่แล้ว +4

      I got thousands of scooter packs

  • @a.mathis9454
    @a.mathis9454 4 ปีที่แล้ว +1

    Know where to pick up the connectors for these batteries?

    • @jehugarcia
      @jehugarcia  4 ปีที่แล้ว

      I have 2000 stuck in customs right now

  • @jeffmoiles3197
    @jeffmoiles3197 4 ปีที่แล้ว +1

    Awesome deal. Still trying to find connectors for the battery packs. Anyone have any links or ideas for them?

    • @jotham123
      @jotham123 10 หลายเดือนก่อน

      connectors are higo L513 for power out, and charging is Z409F

    • @jehugarcia
      @jehugarcia  10 หลายเดือนก่อน

      We have them available at JAG35.com

  • @gregorythomas333
    @gregorythomas333 4 ปีที่แล้ว +2

    It was about 12-13 seconds for it to turn on after hitting the switch.

  • @jsn.gmz.
    @jsn.gmz. 4 ปีที่แล้ว +1

    Hey jehu,
    I am working on my second powerwall build and wanted to see if I could get a deal on 30 or so scooter packs. Let me know if you would be able to help me out on the price at all if I get 30+ packs
    Thanks and appreciate what you do
    Jackson

  • @johnsonnifemi943
    @johnsonnifemi943 4 ปีที่แล้ว +2

    Love it

  • @CoryTaylor904
    @CoryTaylor904 3 ปีที่แล้ว +1

    I have 4 of these batteries, can they be charged is parallel?

    • @jehugarcia
      @jehugarcia  3 ปีที่แล้ว

      Yes

    • @CoryTaylor904
      @CoryTaylor904 3 ปีที่แล้ว

      @@jehugarcia sweet. Even using the charging port? I want to use a 10amp charger to charge all 4 batteries using the charging port.

    • @nikorfanos1721
      @nikorfanos1721 3 ปีที่แล้ว

      @@CoryTaylor904 Yes, and I am no expert, but keep this in mind. If I am reading the specs on the cells correctly (Std. 0.3CA) each 10S4P unit should be charged at 1.2 A, so that's 4.8 A for all 4 in parallel. Of course you can exceed that for fast charging, but it degrades the batteries over time. @jehugarcia is that sound about right?

  • @dmslemos
    @dmslemos ปีที่แล้ว

    Where i can by this

  • @kdreed96
    @kdreed96 4 ปีที่แล้ว +1

    How many packs could that one board wake?

    • @jehugarcia
      @jehugarcia  4 ปีที่แล้ว

      ??? Someone neeeds to test that

    • @rollandklontz
      @rollandklontz 4 ปีที่แล้ว +2

      If only we knew someone with a couple thousand packs to test and find out.

    • @rickniemi1784
      @rickniemi1784 4 ปีที่แล้ว

      @@jehugarcia I have lots of batteries but I don't have the original connectors which I want to use.

    • @Sirus20x6
      @Sirus20x6 3 ปีที่แล้ว

      someone is going to test 40 of them and he said he'd let me know if it works out ok

  • @ronaldharris6569
    @ronaldharris6569 4 ปีที่แล้ว +1

    Does it work jehu? The arduino setup works but it is kinda hacked together

    • @Sirus20x6
      @Sirus20x6 3 ปีที่แล้ว +1

      It works, trust me :)

    • @swormser865
      @swormser865 3 ปีที่แล้ว

      How do I order now?

    • @swormser865
      @swormser865 3 ปีที่แล้ว

      I see the website now all back ordered thx

    • @Sirus20x6
      @Sirus20x6 3 ปีที่แล้ว

      @@swormser865 I just got 50 more in. I haven't adjusted inventory levels of the site yet because I haven't programmed the new batch yet. I should have that done tonight

  • @philipmorgan1438
    @philipmorgan1438 3 ปีที่แล้ว +1

    Faust ES-90 Activator not found on Etsy. Anyone know why there’s no link to it below video?

    • @jehugarcia
      @jehugarcia  3 ปีที่แล้ว

      Because the seller does not offer anymore

    • @philipmorgan1438
      @philipmorgan1438 3 ปีที่แล้ว +1

      @@jehugarcia Strange... I wonder if someone found a problem with it... ? 🤪

    • @philipmorgan1438
      @philipmorgan1438 3 ปีที่แล้ว +1

      @@cocojones3479 I didn’t know I had a channel... 🤪

    • @philipmorgan1438
      @philipmorgan1438 3 ปีที่แล้ว

      @@cocojones3479 nothing there... a tab for “channel” provide settings to edit....

  • @jaliscolo24
    @jaliscolo24 4 ปีที่แล้ว +2

    I need one of those connectors to the battery

  • @UPD282
    @UPD282 4 ปีที่แล้ว

    So it has multiple solder connections I assume you could wire it direct to multiple batteries? Is my logic correct??

  • @easylawncare
    @easylawncare 4 ปีที่แล้ว +1

    Pin header is at top right 6 pin. Just like uno. Downgrade/upgrade. Could use the usbasp to program. To add a led from ground to the blue wire. It will be a pulse light. This is based off aurduino blink code example. Reason for long turn off is because cycle time of voltage pulse is to many cycles per seconds. I almost bet a 555 timer pic ic would work on this.

    • @Sirus20x6
      @Sirus20x6 3 ปีที่แล้ว

      no this requires serial codes to be sent

    • @easylawncare
      @easylawncare 3 ปีที่แล้ว

      Serial code still based on time pulse

    • @Sirus20x6
      @Sirus20x6 3 ปีที่แล้ว

      @@easylawncare it's a 40 bit code. a 555 timer is not suitable for this.

  • @jeremyk8157
    @jeremyk8157 4 ปีที่แล้ว +1

    Nice!

  • @josephau4623
    @josephau4623 3 ปีที่แล้ว +1

    Any one know what are these battery's BMS output? Can they be use for 750watt hub motor?v

  • @Over_50s_DIY_Vanlife
    @Over_50s_DIY_Vanlife 3 ปีที่แล้ว +2

    Hello All,
    I was excited about this video, and promptly ordered the part from the Etsy listing to activate my batteries bought from Jehu. (Sorry I wanted a neat all in one solution)
    However, having paid I decided to check on order status since 1/12 and I find that the Etsy shop is showing closed and item no longer available.
    I really hope that this person (who has posted several times on Jehu’s comments) does not affect the reputation of a great guy like Jehu !
    I hope too that the Etsy issue is just that and the seller will reply soon in some manner, but as his shop is closed on Etsy I currently have no way to contact him. Maybe someone here knows or has received their activator ???
    Simon

    • @Sirus20x6
      @Sirus20x6 3 ปีที่แล้ว +2

      Etsy closed my shop without warning or any communication. I went to log in one day and it was just gone. I'm trying to contact them now. They wont reply to email or their form for closed accounts. I did get someone managing their facebook account to take down my information to look up the account, but they never got back to me. For now I'm still processing all the orders I received before the account closure although it's going to be a lot more difficult now that I can't use their API to create shipping labels for orders and manage them. I'll have to do it all by hand. The boards are coming in batches of 50. I just received a batch yesterday and all 50 are programmed and they just need a switch and a couple components put on by hand and then they get tested, conformally coated, put in static bags, those put in anti-static plastic boxes, then wrapped in bubble wrap etc, boxed and shipped. the next batch of 50 comes in saturday or monday and the next batch probably Tuesday or Wednesday. The orders are being fulfilled in the order they were received so it shouldn't be too much longer for you. I'd have to check but if you ordered on the 12th you might be in this current batch. As soon as I'm able I'm going to be opening a shop on Tindie and then maybe my own standalone site. I'm sorry that communication is so much harder now and some people I don't even have email addresses for so I can't send them tracking unless they find me here or on facebook. This really sucks for everyone involved.

    • @Over_50s_DIY_Vanlife
      @Over_50s_DIY_Vanlife 3 ปีที่แล้ว

      Hi Aaron. As I said before I understand the issue. Hopefully I am in the first batch. You can get me @ sgoring03 with gmail.

    • @Over_50s_DIY_Vanlife
      @Over_50s_DIY_Vanlife 3 ปีที่แล้ว

      @@Sirus20x6 Thanks so much for the activator. Just need to solder it up and test it with one of the batteries 🔋

    • @Sirus20x6
      @Sirus20x6 3 ปีที่แล้ว

      @@Over_50s_DIY_Vanlife No problem! Sorry for all the delays from Etsy shutting me down. I have a new site up for selling directly, and as soon as I'm caught up on all orders I'll announce it for everyone

    • @JoseAlvarado72
      @JoseAlvarado72 3 ปีที่แล้ว

      @@Sirus20x6 I order one but I have not received it as of today hope you are doing ok or hope I am next,
      I am just waiting to see if I get mine soon, please help.
      I notice the Etsy store is gone and I kind of freak out but I found this conversation and I understand but please send me my battery activator soon, please Jose Alvarado
      @ alvaradojoseluis72 with Gmail.
      thanks

  • @relaxingnaturesounds9675
    @relaxingnaturesounds9675 4 ปีที่แล้ว +1

    So that’s basically an in off switch?

  • @jeevespreston
    @jeevespreston 3 ปีที่แล้ว +2

    The Etsy page is gone, anyone know what happened?

    • @jehugarcia
      @jehugarcia  3 ปีที่แล้ว

      Not sure why he stopped offering these, but ive made my own now jag35.com/products/scooter-battery-controller-dongle

  • @leadbadger9543
    @leadbadger9543 4 ปีที่แล้ว +1

    Awwwwww yeeaaahhh!!!!

  • @willverhappen
    @willverhappen 3 ปีที่แล้ว +1

    Any luck getting battery data off i have 36 of them

    • @jehugarcia
      @jehugarcia  3 ปีที่แล้ว

      Yes several people have done it successfully

    • @willverhappen
      @willverhappen 3 ปีที่แล้ว

      How does the data come off ? Also what is the yellow wire

    • @nikorfanos1721
      @nikorfanos1721 3 ปีที่แล้ว

      @@willverhappen if I am to believe a board out of the UK, it is likely a CAN bus line. I have not tested this out yet though.

    • @nikorfanos1721
      @nikorfanos1721 3 ปีที่แล้ว

      @@jehugarcia any that you can share? Searching online hasn't produced any fruits of my labor.

    • @willverhappen
      @willverhappen 3 ปีที่แล้ว

      I saw a video about current and highest and lowest cell and there's seems to be 3 temp sensors. All this data comes out on the green line but I am not sure what you need to read it

  • @jamespowell3056
    @jamespowell3056 3 ปีที่แล้ว +1

    why not use the activator from the scooter. it useable.

  • @electrohacker
    @electrohacker 4 ปีที่แล้ว +1

    yeah... but why?

  • @sellsword7557
    @sellsword7557 4 ปีที่แล้ว +2

    Shipping to Canada would be nice. Just sayin'

    • @Sirus20x6
      @Sirus20x6 4 ปีที่แล้ว

      send me a message on etsy and I'm sure I can ship some there. I just have to figure out what the shipping cost would be

    • @swormser865
      @swormser865 3 ปีที่แล้ว

      How can I order some? Thx

  • @NotaRobot_gif
    @NotaRobot_gif 4 ปีที่แล้ว

    Those batteries look like they have a built in brushless motor controller.

    • @jehugarcia
      @jehugarcia  4 ปีที่แล้ว

      It’s the same tech, mosfets = switches but it’s just a bms

    • @zaneenaz4962
      @zaneenaz4962 3 ปีที่แล้ว

      @@jehugarcia .....was wondering about this....Where are the motor controllers, throttles?? not found on your website jehu ! Thanks. watched these scooters in Sacramento before they pulled them just before CV-19.

  • @thesonie
    @thesonie 3 ปีที่แล้ว

    ohh noooo you are all sold out of the scooter battery's when are you going to get more?

  • @albertfelix3178
    @albertfelix3178 4 ปีที่แล้ว +2

    Really nice 👌 😍💋 💝💖❤️

  • @dreamboxx
    @dreamboxx 4 ปีที่แล้ว +1

    shipping is stupid expensive about 22 USD

    • @swormser865
      @swormser865 3 ปีที่แล้ว

      That 22 for just shipping or include the chip?

    • @dreamboxx
      @dreamboxx 3 ปีที่แล้ว

      @@swormser865 just shipping

  • @quinnfoster4671
    @quinnfoster4671 4 ปีที่แล้ว

    scooter? I barely know her

  • @aldengaven7381
    @aldengaven7381 4 ปีที่แล้ว +2

    Hi Guys 😍💋 💝💖