How to Install - Real Wood Veneer Wallcovering

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 พ.ย. 2024

ความคิดเห็น • 9

  • @Johnnyroten
    @Johnnyroten 2 ปีที่แล้ว +3

    Nice work boots!

  • @월드인터네셔널
    @월드인터네셔널 24 วันที่ผ่านมา +1

    May I know the real wood veneer information?😃

  • @MrWjtk
    @MrWjtk 2 ปีที่แล้ว +2

    Is this a standard veneer with fleece? I'm asking because your products are not available in my country, but I'd love to try this form of wall veener application

  • @j-madirondacks7677
    @j-madirondacks7677 6 หลายเดือนก่อน +1

    What is the blue tool you are using to trim the veneer overlap?

  • @alfredwindsom
    @alfredwindsom 7 หลายเดือนก่อน

    Hello can you apply real wood veneer to OSB ?

  • @CARLOSRUIZ-pe3mo
    @CARLOSRUIZ-pe3mo 2 หลายเดือนก่อน

    fancy name for a sticker

  • @ramkrishnareddy5714
    @ramkrishnareddy5714 3 ปีที่แล้ว

    Walls can't hold geip also bubbles will come later on

  • @anthonyriggi1722
    @anthonyriggi1722 2 ปีที่แล้ว +1

    This method of clay to the wall is not acceptable by Sanfoot or Arbor Veneer Wallcoverings, it will result in higher de-lamination from the wall and shrinkage at the seams. Verify instructions with brand you are installing prior to installation. Most will require clay to the veneer prior to installation.

    • @lesbians4lucy
      @lesbians4lucy 8 หลายเดือนก่อน

      Actually you are half right. The preferred method of installation is to prime walls.Let cure at least 24 to 48. Prime with clay the day before. Install day, glue the material and hang. This creates a double stick application. Installing this way will give you 100% results. Clay dries fairly quickly on the wall. So you can glue up a whole wall or room the day of installation though.