@@TheGardenSnake hey! Just a suggestion, maybe u could edit a 10-15 min video timelapse of your build with some montage like those car builds that I get recommendations by youtube. This might give this build the view count it deserves.
be thankful you've only had that issue since you were older.. I have had that issue since about 13.. I slipped off the seat of my bicycle and ended up wedged between the tire, frame and reflector... Needless to say lefty still gets random shots of pain. -.- I still wonder if I'll ever be able to have kids thanks to it.
Wow, that's a very useful video. Thank you for your explanation of bike supplies for the trip. I'm glad to be a friend of your great channel. Have a nice Sunday. 👍👍👍🤙🤙🤙👌
The big-ass Nelson-Rigg backpack/dry bag is sick. I used mine to do my grocery shopping for a couple of months while I was bike only. I wouldn’t wear it as a backpack for any trip longer than like 20 minutes because it’s so huge and gets awkward. Works great strapped to the passenger seat for longer trips though.
So good 👏🏾. I recommend helicopter tape to prevent your bags rubbing through paint work, it's a clear thick tape that's used for protecting helicopter blades and bicycle frames 👍🏾
& for anyone else wondering Nelson Rigg/Rigg Adventure gear is top tier shit i've been using some of their stuff for years. Cooler, tail bag, dry bag... and that little bag-in-a-bag! Keep it under your tail section and one day getting that food home will pay it all back.
chef jake up in here with his cutting board mt07 that he uses for his outdoor cooking youtube channel I do enjoy using whatever you can do make it work and look good. My dad and I made a gimbal like go pro mount for the top of my drift car. using a wheel bearing and a fin out of sheet metal.
I have the large backpack and i strapped it on my z800. I did 1600 miles from fl to nc to the coast of sc back to fl no issue and i have used there rain suit for a few years now
Oh Jakey Jake. You should try mounting your duffle sideways because that leaves you with more butt room and don't worry about aerodynamics either. It's an adventure bike, not a track bike. And if you drop your bicycle the bag will soften the blow slightly. Beginner tip from a beginner.
The bag is mounted further back than the back of the seat. It doesn’t interfere with the seat at all this way. The crash cage catches the bike if he drops it. 🤷♂️
No room for cutting boards up front for Ropax? Could do semi-biomorphic on rear. I used to have a long duffle loosely packed and attached transversly that would hang over edges looking like a rear weighted GiantLoop.
on my TW200 with a cyclerack rear rack a common top box is the harbor freight Pelican copy case. i mounted mine using HP computer/monitor quick release mounts, slim and really sturdy, but they have to slide into each other a few inches to latch, so need some room to slide. in hindsight i would look into snowmobile mounting hardware, but i had access to those computer mounts lol. A hard box isn't too nice for off road anything, its a bit hard on the lower spinal region.
Board looks great, but I'd be concerned with tail light visibility, any driver sitting higher than board level might not see your braking light when going right behind you. For that reason I would think of some additional LEDs to improve visibility.
So question I had... have you considered changing out any of the plastic fairings? The gray worked well with the neon yellow, but I wonder if maybe the black, white, or some other color would work better with your new(ish) wheels. I just swapped out my gray for the glacier blue, and I am upset with myself now that I waited so long to do so!
What bag model did you use on there ? I’ve been searching and I can’t seem to find it ! Great video. I have a Nelson rigg tank and commuter tail bag on my gsxs750 / I might add a rack to a spare pillion seat pad with a larger bag for camping. Thanks 🙏!
I just thought "oh, Jake has a new haircut" and then I looked closer and thought "where's his beard tho" and looking even closer, I came to realise, that I was looking at Jake's brother. Wow.
How is the visibility of the taillight? It looks super obscured by the stuntframe. Imagine getting pulled over and loosing your plates for that on a trip
I was kinda worried about that but two things I noticed that help. One is the angle, while it looks bad you’d still have to be following way to close not to see them. Like close enough that the grill/hood of the truck would be hiding the whole bike already. We looked at this for a bit messing around with eyeing it. Second observation is these brake lights are super bright especially the side ones. At night there’s a whole glow on the back of the bike and the ground. And in the day they’re still pretty wild. HOWEVER 😁 I have thought about adding a small light back there. If I do I’ll make it on a 3 pin quick connector for quick discount. At that point I’d have 4 brake lights 🤣
Nooo jake. You are putting weight in all the wrong places, slap those rotopax on the front crash bars and strap some side bags on the side. Weight centralization works 👍🏻 Btw did you lose weight? You look handsome. 😘
Man if I put them up there they’d get smashed! I think I’ve got to rotopaxs in the best place I can put them. They’re protected in a crash and as close to center mass as I can get them. Man I’ve got a dad bod. Need to hit the pedal bike more.
@@TheGardenSnake hmm yeah ok good point there. Just seems like a lot of weight in the worst place it can be 😅Anyway loving the build and keep up the good work 😁 Building a 701 Rally right now check it on my adv Insta @adventure_attack
Hey Jake... Do your nuts hang low? Do they wobble to and fro? Can you tie em in a knot? Can you tie em in a bow? Do you sit on em everywhere you go? :D I feel your pain.. I know I'm not the only one either as both Billy Lane and Jesse James have commented on shows about the "chopper lift" where you have to lift the boys up before you sit down on a motorcycle's seat.
Where do u get sick black cutting boards all i find is shitty wood ones an thin white or glass bs lol what store is best for cutting boards? I used 2 to fix my petal boat one for rudder and one for a paddle works mint
This bike is turning into a BMW, in the sense that you’d have to take the whole car apart to change the headlight Edit: don’t get me wrong, I really like the build. Just some harmless humor
The Nelson Rigg guys are the bomb! Also, how the hell did one of the realest builds on youtube end up only getting these views
I don’t know 🤷♂️
@@TheGardenSnake hey! Just a suggestion, maybe u could edit a 10-15 min video timelapse of your build with some montage like those car builds that I get recommendations by youtube. This might give this build the view count it deserves.
11:05 When you get to the age you start sitting on parts you never used to haha
Gravity
be thankful you've only had that issue since you were older.. I have had that issue since about 13.. I slipped off the seat of my bicycle and ended up wedged between the tire, frame and reflector... Needless to say lefty still gets random shots of pain. -.- I still wonder if I'll ever be able to have kids thanks to it.
I complained a lot in the comments in the video for the original setup, what you did here is what I was expecting, it looks great
Wow, that's a very useful video.
Thank you for your explanation of bike supplies for the trip.
I'm glad to be a friend of your great channel.
Have a nice Sunday.
👍👍👍🤙🤙🤙👌
Nelson Rigg is awesome. Getting ready to order their saddle bags for my klx 250.
MT-07 Cutting Board Edition! One of a kind, haha, its been great seeing this build come together, keep it up!
Your brother with great tools and workmanship
these vids with your bother are gold jake, love it!
I love when Ian is around. Jake, you seem tired. Lol
😂 he sucks the life outa me
@@TheGardenSnake 🤣🤣🤣
The big-ass Nelson-Rigg backpack/dry bag is sick. I used mine to do my grocery shopping for a couple of months while I was bike only. I wouldn’t wear it as a backpack for any trip longer than like 20 minutes because it’s so huge and gets awkward. Works great strapped to the passenger seat for longer trips though.
When you add all that weight on the back its an absolute wheelie monster.
Had to come back to this video for inspiration on my inexpensive DIY ADV build. Didn’t notice that Wayne’s World reference at 2:19. SHWING
That bike is awesome with well fabricated items
Amazing use of cutting boards dude. You and your bro make some good stuff! Good times.
So good 👏🏾. I recommend helicopter tape to prevent your bags rubbing through paint work, it's a clear thick tape that's used for protecting helicopter blades and bicycle frames 👍🏾
this is so underrated man I hope someone from a big custom shop somewhere see's this and gets you the work/popularity you deserve.
& for anyone else wondering Nelson Rigg/Rigg Adventure gear is top tier shit i've been using some of their stuff for years. Cooler, tail bag, dry bag... and that little bag-in-a-bag! Keep it under your tail section and one day getting that food home will pay it all back.
chef jake up in here with his cutting board mt07 that he uses for his outdoor cooking youtube channel
I do enjoy using whatever you can do make it work and look good. My dad and I made a gimbal like go pro mount for the top of my drift car. using a wheel bearing and a fin out of sheet metal.
Don't forget to add this to the playlist
Kewl! That bag has a cooked play button on the end of it
Was thinking of making rear rack last week using the same technique, what great timing
Haha good timing for sure
It’s insane that I have notifications on, but haven’t gotten one or seen you suggested in my feed in so long.
Love ya jake.
I have the large backpack and i strapped it on my z800. I did 1600 miles from fl to nc to the coast of sc back to fl no issue and i have used there rain suit for a few years now
Awesome. Wish u showed the actual bike much more often... just side profile shots of it so we can see it looking cool as its being updated
Now you can chop your veggies on the side of the trail too!
Oh that’s happening
El mejor producto presentado en este video: la tabla de cortar!
Oh Jakey Jake. You should try mounting your duffle sideways because that leaves you with more butt room and don't worry about aerodynamics either. It's an adventure bike, not a track bike. And if you drop your bicycle the bag will soften the blow slightly. Beginner tip from a beginner.
The bag is mounted further back than the back of the seat. It doesn’t interfere with the seat at all this way. The crash cage catches the bike if he drops it. 🤷♂️
“i heard you like racks!” ... i’m still laughing about that. funny video. also very well done rack!
Loved the Wayne’s World line!!
Awesome bike, Jake!
I haven't been this excited for a premiere since the dark knight
hahaha ok
No room for cutting boards up front for Ropax? Could do semi-biomorphic on rear.
I used to have a long duffle loosely packed and attached transversly that would hang over edges looking like a rear weighted GiantLoop.
Nice reflective triangles
Well this has pretty much been the longest 43hours.. Love from South Africa
Come back, it's up now haha
Nice flatbed!
Keep them coming Jake!
on my TW200 with a cyclerack rear rack a common top box is the harbor freight Pelican copy case. i mounted mine using HP computer/monitor quick release mounts, slim and really sturdy, but they have to slide into each other a few inches to latch, so need some room to slide. in hindsight i would look into snowmobile mounting hardware, but i had access to those computer mounts lol. A hard box isn't too nice for off road anything, its a bit hard on the lower spinal region.
Hello sir Jake I Love you videos from Philippines..I would to see another videos about your 650r my dream bike hehe
Board looks great, but I'd be concerned with tail light visibility, any driver sitting higher than board level might not see your braking light when going right behind you. For that reason I would think of some additional LEDs to improve visibility.
You have inspired me.
That is one sweet setup!
Nice work good idea
So question I had... have you considered changing out any of the plastic fairings? The gray worked well with the neon yellow, but I wonder if maybe the black, white, or some other color would work better with your new(ish) wheels. I just swapped out my gray for the glacier blue, and I am upset with myself now that I waited so long to do so!
Good inspiration 🤘
Hahahaha 6:24 got me good🤣
What bag model did you use on there ? I’ve been searching and I can’t seem to find it ! Great video. I have a Nelson rigg tank and commuter tail bag on my gsxs750 / I might add a rack to a spare pillion seat pad with a larger bag for camping. Thanks 🙏!
Stay golden Ponyboy
With all those cutting boards, glad we don't have smell-o-vision for all those times you 'Cut the Cheese' lol
Killer stuff dude
Let the wait begin!
premieres in 39 hours!? Cool
not sure why it popped up this early
I hate that this is even a thing
hey Jake i think you could start a multi-million dollar business with your dual purpose cutting board racks hahaha.
Call now and will double this offer!
@@TheGardenSnake sounds like a deal
"A stretcher for babies"
Lolololol
6:22 jakes brother is the final boss
🤣🤣🤣
It’s going to be used as a mudguard to
I just thought "oh, Jake has a new haircut" and then I looked closer and thought "where's his beard tho" and looking even closer, I came to realise, that I was looking at Jake's brother. Wow.
I mean he has beard... but... less lol
@@SirPantomime lmao I was confused for a second
Do you actually use the Rotopax? Or are they just there acting as a crumple zone when you crash?
Time for a bigger garage boys.
How to get the fork extension???
How is the visibility of the taillight? It looks super obscured by the stuntframe. Imagine getting pulled over and loosing your plates for that on a trip
I was kinda worried about that but two things I noticed that help. One is the angle, while it looks bad you’d still have to be following way to close not to see them. Like close enough that the grill/hood of the truck would be hiding the whole bike already. We looked at this for a bit messing around with eyeing it. Second observation is these brake lights are super bright especially the side ones. At night there’s a whole glow on the back of the bike and the ground. And in the day they’re still pretty wild. HOWEVER 😁 I have thought about adding a small light back there. If I do I’ll make it on a 3 pin quick connector for quick discount. At that point I’d have 4 brake lights 🤣
use cutting boards to make some handlebars
Nooo jake. You are putting weight in all the wrong places, slap those rotopax on the front crash bars and strap some side bags on the side. Weight centralization works 👍🏻 Btw did you lose weight? You look handsome. 😘
Man if I put them up there they’d get smashed! I think I’ve got to rotopaxs in the best place I can put them. They’re protected in a crash and as close to center mass as I can get them. Man I’ve got a dad bod. Need to hit the pedal bike more.
@@TheGardenSnake hmm yeah ok good point there. Just seems like a lot of weight in the worst place it can be 😅Anyway loving the build and keep up the good work 😁 Building a 701 Rally right now check it on my adv Insta @adventure_attack
G'day from Australia. Love ya jake
Sup mate
@@TheGardenSnake Centrelink 👌
@@joelparlour3762 Jake has no idea what centre link is lmao
Hey Jake... Do your nuts hang low? Do they wobble to and fro? Can you tie em in a knot? Can you tie em in a bow? Do you sit on em everywhere you go?
:D I feel your pain.. I know I'm not the only one either as both Billy Lane and Jesse James have commented on shows about the "chopper lift" where you have to lift the boys up before you sit down on a motorcycle's seat.
But can you throw them over your shoulder, like a continental soldier???
Note to self, avoid Adventure Hops.
jake you should do a hoodie where their is the gnome on the front and your massive jaketgs snake in the middle of the back
nice!
Your brother needs to show how need mounted the router table to the saw.
nice
So 2021 is gonna be TaT and 2022 long way arround?
2024 mars
Where do u get sick black cutting boards all i find is shitty wood ones an thin white or glass bs lol what store is best for cutting boards? I used 2 to fix my petal boat one for rudder and one for a paddle works mint
I actually need this to be a diy tutorial
it is
Another Australian commenting!
I think I got PTSD when you were drilling metal and the shavings were rotating close to your eye, just waiting for their moment to suck
Comment for the pay
I would like to adopt your brother.
Well he’s an adult 😂
Dad?
What is your brothers real job!
This bike is turning into a BMW, in the sense that you’d have to take the whole car apart to change the headlight
Edit: don’t get me wrong, I really like the build. Just some harmless humor
It’s about the same as stock. I’ve added a few things but also removed a lot.
@@TheGardenSnake it looks dope! really unique, I’m excited for the adventure rides in the future
KTM if your reading this i need a dual-sport 690!
11:35 naa I'm good this is plenty long enough.
4:13 headphone warning. Jeebus.
Sorry
Cut the cutting board!
Ian is that the starret center punch?
It is!
@@MrMadman7 nice! I have one of those, such a great tool. Nice wood working set up, I didn't see a planar in the video.
@@michaelmckay Thanks! I don't think I could fit a planer into my already cramped garage. I have too many hobbies lol
@@MrMadman7 you beat me, I envy your table router and table saw. I don't have room for those 😂
Who needs to see your brake lights anyway
ouuuu lol
I would buy this bike if it were a production model....like adventure bikes but they are boring or huge...
Yamaha Tenere 700
@@mooiboyace Doesn't have the same look. I dislike that it looks like a dual sport! They almost nailed it....
While mere mortals spend a fortune on cutting edge technology, Jake DIYs it using cutting board technology
do you make more money when i watch the adds all the way thru?
Clicking on them is the thing 👍
@@TheGardenSnake gotchu fam
Hi
Hello
Just buy a BMW 1200 GS!
That is the ugliest bike in the world from Wal-Mart
Built badly and broken
Yes that