I literally messaged with an agent tonight and they said it was just broken. Turned out that when I removed the nozzle, the metal piece stayed on and I hadn't noticed. I watched your video, double checked, noticed the metal piece and that it was in fact rusted like yours, removed it, and the unit started working again. Thank you for saving me a few hundred on a new one!
My brother was convinced his SunJoe was broken. After watching your video, I wasn't sure such a simple fix would work, but it did! Many thanks for saving us from buying a new machine!
Like most everyone commenting, you saved my butt! I dragged my power washer a few hundred miles to help a relative and it wouldn’t work. I was so frustrated and then I found this video. Just like you said, the nozzle was clogged. Problem solved- my aunt thanks you for getting her deck cleaned up for spring!
This is phenomenal info. I tried to use my Sun Joe today and it turned on, and immediately shut off. I took off the nozzle tip to see that it was completely rusted over. Switched out the tip and it’s working like a charm. Now to soak the rusted one in vinegar. Thanks so much this video is a lifesaver
My Sunhjoe ran for 15 minutes. Couldn't figure it out. Followed this video step-bystep -- clogged hose. Eliminated clog. Fixed! i CAREFULLY cleaned the hose, nozzle, and handle. Thanks SevenFortyOne
you are awesome! my electric pressure washer stopped working after two hours of cleaning. This is my third year with it. I tried the manufacturer but no longer exists. was about to throw it out and buy a new one when i thought of you tube! the first helper i watched took the whole thing apart and found the problem. so there i went! all those screws!! put it back together and still didn't work. was really discouraged, about to give up and decided to try one more helper--YOU!! am so happy i found you. changed the nozzle and it works!! saved me $$$ and gave me such a boost! I am a 74 yr old woman who keeps up her own house and love learning to fix things. you tube has made such a difference!!
My man my Sun Joe wasn't working today,, not only did you help me but I put away the sun joe for the winter with the same nozzle you did. After watching your video and went back outside and looked at the nozzle same as your and rusted like yours , pulled that nozzle off and it fired right up … I was getting ready to send you a check for $10,000 but I felt in my heart you would rather have a like and Sub.
So I had the same problem... two days ago. Funny, but your video was the first that popped up when I googled but I was convinced that mine was an electrical problem. Mucho elbow grease scrubbing the deck that had three years of moss, and a call to Sun Joe (who diagnosed that it was the leaking hose attachment and couldn't wait to get off the phone!) later to troubleshoot and my frustration built. I watched video after video and finally watched your video again because it kept popping up. I still thought it wasn't "your" issue but walked through your very clear and thorough steps. It was indeed that very issue!!!!! Thanks so very much for this post as I so was not looking forward to buying a new pressure washer, especially as I'd only used mine twice!
You just saved me 200 bucks. I can't believe after a morning of fighting with this thing, that it never occurred to me to check the friggin nozzle! Thank you so much
I came back to your video to thank you for fixing my SunJoe but I see I’m not the first one. When I fired up your vid you described my problem exactly and the fix was unbelievably easy. I thank you, my wife thanks you, and the SunJoe, it goes without saying.
You just saved my pressure washer. I replaced plug still didn’t work… it was on its way to the dump. Watched your video and checked the nozzle it was clogged which was the problem! Thank you so much.
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use th-cam.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
Thank you so much!! I was very frustrated because I only used the machine for one year, but I forgot to remove the nozzle and it got rust. I had no idea that could be the problem. I clean a little bit with WD-40 to remove the rust and it finally came out, then I put the nozzle in white vinegar and it had a lot of black particles inside. As soon as I cleaned everything it worked right away!! Thanks!!
You saved me a lot of time and money. I watched your walkthrough and figured out the challenge was exactly as you determined. I can't believe stainless steel was not used but that aside amazing knowledge was passed on to others. Best part about the internet. You made the world a better place. Thanks!
Another thank you comment, I had already replaced the GFI plug, thinking that was my problem. Then it still didn’t work, but you’re right the 15 degree nozzle was rusted over, replaced it with the 25 degree, works like a charm. Thank you, thank you
OMG! Your video just saved me $150!! I was just about to run n to Home Depot to buy another machine but thought I’d hit up TH-cam first to see if it as something that I could fix!! Watched your video, pried off the rusted attached nozzle & it started working again!!! Thanks!!!!!
I wish I could buy you a beer. First pressure wash of the season and had the exact same issue, I was about to go to Lowes to buy a new one. The nozzle that was on it was completely clogged, works fine now. Thank you.
Thank you so much.! You are brilliant. Ours quit and after buying 2 new pressures hoses, we were considering buying a new pressure washer. I then turned to TH-cam. I found your video and went out and took off the nozzle and low and behold all gunk all came out of the wand. We turned it on and low and behold....fixed. We will put all of our nozzles in vinegar to clean. Thank you so much.
Thanks , I had the same problem. I was about to order a new washer . Thought I’d just check TH-cam out first and there you were with the same problem and a logical solution. Many thanks.
A HUGE thank you! This was my exact problem. You logically & clearly broke down each part & found the issue…and so did I!!! Ty for saving me $$ from buying new machine!
My warranty ran out 9 days ago I was about to consider a new one and had put it in my Amazon cart Then I watched your video. Amazing. Already started cleaning my siding on my house. I’m so glad you made this video
The exact same thing happened to me and I skipped to the end and it was just a rusty nozzle! You saved me hours and this pressure washer from the landfill thank you!
This video really helped. I had the same problem and thought it was electrical. After watching this video I looked at the tip and sure enough it was clogged. I switched tips and worked as good as ever. Thanks!!!
Damn! I wish I would have seen this before I bought a new GFCI plug. After the new plug didn't fix the problem, I unscrewed the hose from the washer, pressed the trigger on the gun to let out any pressure, and voila, it worked! My next step was to buy a new pressure washer. At least this video saved me from making that mistake! Thanks!
My neighbor today give me one because didn’t work no more I accept, 30 minutes ago trying to figure out what’s wrong i found this video it was the exactly same problem. Thank you so much for share this video.
I'd been experiencing the strange and frustrating pulsating after the unit was away for the winter, and t nj ought something was really wrong with mine. Soaked the nozzle in vinegar for about 10 minutes and Q-tipped it; also poked it from the inside with the sharp end of a corn holder. All's perfect now. THANK YOU for posting this; you've done us a great service.
I have the exact same unit, the exact same nozzle, and the exact same story about putting it away working but now broken. Would only run for a second or two. I watched this video, thought no way I have some kind of thermal fuse / electrical problem, However 100% this was the fix! You were right.Thank you!
Thank you sooo much! This Sunjoe was almost a goner but your video saved it to pressure wash another day and also saved me from having to buy another one. Many many thanks!!!
WoW!!! Thank you for this video!! You saved me from a nervous breakdown. I was so upset it wasn’t going to work after I had prepped everything. Solved it thanks to you!!
Thanks! You just saved me a week's headache and the prospect of "sending it out for repair!" Your video was spot on, and the explanation and demonstration was great. Turns out my rusted nozzle was the issue. That's the problem with these non-constant systems. The use back-pressure to determine if you're squeezing the handle and there's back pressure they don't run the pump until it's alleviated. A clogged has nozzle appears the same to the pump. That's not really that big of a deal because running a pump motor against a static water load isn't going to compress the water (at normal temperatures) and will just overheat the motor.
After watching about five TH-cam vids on how to get my Sunjoe 3200 to start after taking it out of winter storage yours was the one that solved my problem in six minutes....found some dirt in the wand.
Thank you thank you thank you! We were just fixing to chuck our Sun Joe when it turns out it was just the tip. Works like a charm now, and we know not to leave the tip on anymore.
My SJPW conked out, I thought that I had burned out the motor! Your video explained how to troubleshoot the machine and I was able to restore operations and complete the job. TU!
This video was right on target! Exactly what was wrong with my Sun Joe. The nozzle was rusted. Put on a different one and all was well. Thanks so much!!
Dude, this is EXACTLY what the issue was with my PW. Ya have to be careful though, PRESSURE is already built up behind that tip. When mine came off it turned into a projectile! Like popping a champagne cork🤣🤣🤣🤣 Thank you for the video!
Thanks for posting this ! A little rust was plugging the nozzle after winter storage . Need to add taking nozzle off the wand to the storage checklist. Left it in the garage last year and the wand broke . Got off lucky . Could have wrecked the machine .
This was very helpful, thank you. The troubleshooting guide in the owner's manual mentions nothing about this. It says to change the fuse, and then doesn't say how to do that. I came here looking for just that when I came across this video. I changed the nozzle and, voila! It worked. I had left a nozzle on over the winter and it rusted over. Only problem is... there was so much pressure built up in the hose that when I released the nozzle it shot off like a bullet and I never found it! Good thing I had the good sense to point it away from me... I definitely could've lost an eye! Thanks again.
You the man. Similar situation here. I open the pressure by the system and all the remaining water came out. Screwed it back in and works like a charm!!!! Save me to go out fir a replacement.
Great tip. Couldn’t get washer to turn on. Switched nozzle and it work. Now to clean the rusted nozzle. Why doesn’t Sunjoe tell you in the troubleshooting section of their manual. Terrific to find an easy fix. THANKS !!!!
Thank you so much for showing us how to fix problems with the sunjoe. I had the same problem and could not come up with a solution. You clearly explained what the problem was and I had it back at work within 10 minutes. Thank you thank you thank you.
The same thing happened to me and you saved me a lot time and aggravation! The middle nozzle that I use the most must be clogged/rusted since everything else seems to be clear and the other nozzles work. Thank you so much!
WOW- we need more people who have common sense and intelligence to make more of these videos on fixing things! Thanks to you found the video and was pressure washing shortly after! Thought it was the power switch- nope! rusty end! Thanks!
Thanks! I thought I would have to throw my Sun Joe pressure washer away. Instead of de-rusting the nozzle, because I find that it causes even more rust, I poked a fine needle thru it until I could see the light as in your video. This makes that particular nozzle usable right away.
I was going to throw mine way because it was not working I even replaced the plug thinking the GFI plug was bad. Well it still didn’t work so Google it and found this video and you guessed it it was a plug nozzle!! Thank you.
So glad I found your video. Same problem and I would not have thought the issue could be a rusted nozzle. Thank you! I still have an issue with some leaking at the hose connection and/or connector to stem on unit, even after replacing the original plastic connector with a brass one. If you happen to have a suggestion for that I would be very interested.
I'm glad I watched the whole video because it was your last tip that solved it for me. It's crazy that a clogged tip can cause the whole machine to malfunction. I guess a good soak in CLR might fix the clogged tip. Thank you for taking the time to create this video.
Thanks for your help!!! I put everything back together one piece at a time. It worked every time til I put on the tips. So I took your suggestion and soaked them all in vinegar then cleaned out the inside of each of them. Works great now!! Thanks!
I had a revelation you may want to consider and even add a recommendation above into your title line. After careful analysis, I can say the tips are corrosion-resistant stainless. The main handle and valve assembly are similarly corrosion resistant. The corrosion problem is the "wand extension." It is cheap metallic "chrome" that rusts easily. When stored in the wand holder (vertically with a spray nozzle installed and pointed down) corrosion bits will collect in the nozzle until it's clogged. Solution? Remove the spray nozzles before storing for any lengthy period.
![ลองสุ่มไอโฟน 990 โกงมั้ย? [ โกงมั้ยครับ ep.101 ] | DOM](http://i.ytimg.com/vi/bfsWe0j492k/mqdefault.jpg)
I literally messaged with an agent tonight and they said it was just broken. Turned out that when I removed the nozzle, the metal piece stayed on and I hadn't noticed. I watched your video, double checked, noticed the metal piece and that it was in fact rusted like yours, removed it, and the unit started working again. Thank you for saving me a few hundred on a new one!
Visiting a friend and his Sunjoe stopped working. This video made me look like a genius in getting it working again.
THANK YOU, this got my pressure washer working in seconds!!
My brother was convinced his SunJoe was broken. After watching your video, I wasn't sure such a simple fix would work, but it did! Many thanks for saving us from buying a new machine!
Absolutely SAME today!!! Thank you!
I was about to buy another more expensive washer until i found this today within 3mins or so FIXED! Thank you.
Like most everyone commenting, you saved my butt! I dragged my power washer a few hundred miles to help a relative and it wouldn’t work. I was so frustrated and then I found this video. Just like you said, the nozzle was clogged. Problem solved- my aunt thanks you for getting her deck cleaned up for spring!
Awesome 👍
Just like all the other commenters, this was the exact same problem we had today....within 4 minutes, we were up and running!!! Thank you so much!!!
This is phenomenal info. I tried to use my Sun Joe today and it turned on, and immediately shut off. I took off the nozzle tip to see that it was completely rusted over. Switched out the tip and it’s working like a charm. Now to soak the rusted one in vinegar. Thanks so much this video is a lifesaver
My Sunhjoe ran for 15 minutes. Couldn't figure it out. Followed this video step-bystep -- clogged hose. Eliminated clog. Fixed! i CAREFULLY cleaned the hose, nozzle, and handle. Thanks SevenFortyOne
you are awesome! my electric pressure washer stopped working after two hours of cleaning. This is my third year with it. I tried the manufacturer but no longer exists. was about to throw it out and buy a new one when i thought of you tube! the first helper i watched took the whole thing apart and found the problem. so there i went! all those screws!! put it back together and still didn't work. was really discouraged, about to give up and decided to try one more helper--YOU!! am so happy i found you. changed the nozzle and it works!! saved me $$$ and gave me such a boost! I am a 74 yr old woman who keeps up her own house and love learning to fix things. you tube has made such a difference!!
Awesome! Glad this helped!
My man my Sun Joe wasn't working today,, not only did you help me but I put away the sun joe for the winter with
the same nozzle you did. After watching your video and went back outside and looked at the nozzle same as your and
rusted like yours , pulled that nozzle off and it fired right up … I was getting ready to send you a check for
$10,000 but I felt in my heart you would rather have a like and Sub.
You just saved me from buying a new pressure washer!!!. It was indeed just the clogged nozzle.
Thank you!!!
So I had the same problem... two days ago. Funny, but your video was the first that popped up when I googled but I was convinced that mine was an electrical problem. Mucho elbow grease scrubbing the deck that had three years of moss, and a call to Sun Joe (who diagnosed that it was the leaking hose attachment and couldn't wait to get off the phone!) later to troubleshoot and my frustration built. I watched video after video and finally watched your video again because it kept popping up. I still thought it wasn't "your" issue but walked through your very clear and thorough steps. It was indeed that very issue!!!!! Thanks so very much for this post as I so was not looking forward to buying a new pressure washer, especially as I'd only used mine twice!
Thanks a million! Saved us a lot of time and money
You just saved me 200 bucks. I can't believe after a morning of fighting with this thing, that it never occurred to me to check the friggin nozzle! Thank you so much
I came back to your video to thank you for fixing my SunJoe but I see I’m not the first one. When I fired up your vid you described my problem exactly and the fix was unbelievably easy. I thank you, my wife thanks you, and the SunJoe, it goes without saying.
You just saved my pressure washer. I replaced plug still didn’t work… it was on its way to the dump. Watched your video and checked the nozzle it was clogged which was the problem! Thank you so much.
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use th-cam.com/users/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
Thank you so much!! I was very frustrated because I only used the machine for one year, but I forgot to remove the nozzle and it got rust. I had no idea that could be the problem. I clean a little bit with WD-40 to remove the rust and it finally came out, then I put the nozzle in white vinegar and it had a lot of black particles inside. As soon as I cleaned everything it worked right away!! Thanks!!
You saved me a lot of time and money. I watched your walkthrough and figured out the challenge was exactly as you determined. I can't believe stainless steel was not used but that aside amazing knowledge was passed on to others. Best part about the internet. You made the world a better place. Thanks!
I'm glad this helped. thanks for the kind words
Thanks sir!! I had the exact same issue! Pressure washer now works again!
THANK YOU! My problem was EXACTLY what you found. I'm so happy I don't need to deal with warranty support.
Just wanted to say thank you. The yellow nozzle was the culprit. Pressure locked. Bravo sir! 💪
I thought my machine was broke. This video saved me from buying a new one. Thanks!
Can't thank you enough. Same exact problem. Removed the tip and it works fine. Soaking the tip now. Thanks again.
Thank you for this video! My Sunjoe wouldn’t turn on today. But I found your video and my nozzle was rusted too. I changed it and the washer worked! 😃
Another thank you comment, I had already replaced the GFI plug, thinking that was my problem. Then it still didn’t work, but you’re right the 15 degree nozzle was rusted over, replaced it with the 25 degree, works like a charm. Thank you, thank you
OMG! Your video just saved me $150!! I was just about to run n to Home Depot to buy another machine but thought I’d hit up TH-cam first to see if it as something that I could fix!! Watched your video, pried off the rusted attached nozzle & it started working again!!! Thanks!!!!!
Cool!
Wow. Spent an hour fiddling with my Sunjoe then watched this video and felt really stupid. Thanks for posting this. It happens every year. 🤦🏻
I wish I could buy you a beer. First pressure wash of the season and had the exact same issue, I was about to go to Lowes to buy a new one. The nozzle that was on it was completely clogged, works fine now. Thank you.
Glad to hear it
Thank you so much.! You are brilliant. Ours quit and after buying 2 new pressures hoses, we were considering buying a new pressure washer. I then turned to TH-cam. I found your video and went out and took off the nozzle and low and behold all gunk all came out of the wand. We turned it on and low and behold....fixed. We will put all of our nozzles in vinegar to clean. Thank you so much.
Glad you got yours fixed!
Googled SunJoe not starting. This was the first video that came up. It was the exact solution to our problem. THANK YOU
Thanks , I had the same problem. I was about to order a new washer . Thought I’d just check TH-cam out first and there you were with the same problem and a logical solution. Many thanks.
A HUGE thank you! This was my exact problem. You logically & clearly broke down each part & found the issue…and so did I!!! Ty for saving me $$ from buying new machine!
You are most welcome! Glad this helped!
I'm the latest member of this club...Thanks to this video I looked like a hero to my wife. Thanks so much!
You deserve a gold medal for this video.
Thanks!
You are a life saver bro!! My nozzle is rusted 😂. Thanks alot!!!!! Almost toss this washer in the trash lol. 💯
My warranty ran out 9 days ago I was about to consider a new one and had put it in my Amazon cart Then I watched your video. Amazing. Already started cleaning my siding on my house. I’m so glad you made this video
The exact same thing happened to me and I skipped to the end and it was just a rusty nozzle! You saved me hours and this pressure washer from the landfill thank you!
This video really helped. I had the same problem and thought it was electrical. After watching this video I looked at the tip and sure enough it was clogged. I switched tips and worked as good as ever. Thanks!!!
Damn! I wish I would have seen this before I bought a new GFCI plug. After the new plug didn't fix the problem, I unscrewed the hose from the washer, pressed the trigger on the gun to let out any pressure, and voila, it worked! My next step was to buy a new pressure washer. At least this video saved me from making that mistake! Thanks!
April 2022, I was just about to throw mine away. My problem was the nozzle was block by rust. Thanks for that video, truly appreciated. Marc
My neighbor today give me one because didn’t work no more I accept, 30 minutes ago trying to figure out what’s wrong i found this video it was the exactly same problem. Thank you so much for share this video.
I'd been experiencing the strange and frustrating pulsating after the unit was away for the winter, and t nj ought something was really wrong with mine. Soaked the nozzle in vinegar for about 10 minutes and Q-tipped it; also poked it from the inside with the sharp end of a corn holder. All's perfect now. THANK YOU for posting this; you've done us a great service.
I have the exact same unit, the exact same nozzle, and the exact same story about putting it away working but now broken. Would only run for a second or two. I watched this video, thought no way I have some kind of thermal fuse / electrical problem, However 100% this was the fix! You were right.Thank you!
Thank you sooo much! This Sunjoe was almost a goner but your video saved it to pressure wash another day and also saved me from having to buy another one. Many many thanks!!!
Awesome 👍
I was so frustrated I was about to buy a gas pressure washer. Thanks to you I just saved $400. Thanks. >subscribed
Thanks for pointing me in the right direction. Changed the nozzel and the problem was solved.
Jeff W from Gainesville, Ga. says THANK YOU ! I was about to pack it up for service when I found your channel. You saved me many $$!!!
Glad to hear this!
Thank you. My daughter and I spent 30 minutes playing around. Found your video and 5 minutes later. We were Power Spraying like bosses.
WoW!!! Thank you for this video!! You saved me from a nervous breakdown. I was so upset it wasn’t going to work after I had prepped everything. Solved it thanks to you!!
Thanks! You just saved me a week's headache and the prospect of "sending it out for repair!" Your video was spot on, and the explanation and demonstration was great. Turns out my rusted nozzle was the issue.
That's the problem with these non-constant systems. The use back-pressure to determine if you're squeezing the handle and there's back pressure they don't run the pump until it's alleviated. A clogged has nozzle appears the same to the pump. That's not really that big of a deal because running a pump motor against a static water load isn't going to compress the water (at normal temperatures) and will just overheat the motor.
this vid is still helping people like me 3 year later-thank you!
After watching about five TH-cam vids on how to get my Sunjoe 3200 to start after taking it out of winter storage yours was the one that solved my problem in six minutes....found some dirt in the wand.
You're my hero. Switching tips is all it took.
Thank you soo much!! Didn't use mine last summer thinking it was broke..saw your video and now it works!! Rusted nozzle. Your the man! 👊
My husband was about to sling our power washer over the hill LOL
Thank you for this awesome video!!
Awesome video. Fixed mine 30 seconds after watching this
I read a bunch of comments and see you made a lot of people happy, and I'm one of them too. So, thank-you!
Thank you, Thank you! Save me a lot of heartache. Same thing happened to me. Let it sit, cleaned the nozzle and now it works fine.
I'll echo what many others have said. Your solution was spot on!. I swapped out the nozzle end and all was well. Thank you!
Thank you thank you thank you! We were just fixing to chuck our Sun Joe when it turns out it was just the tip. Works like a charm now, and we know not to leave the tip on anymore.
My SJPW conked out, I thought that I had burned out the motor! Your video explained how to troubleshoot the machine and I was able to restore operations and complete the job. TU!
Thank you for the closed captioning. I need it and I understand why my Sunjoe was not working. I will take a look at it. Thanks!
This was the first video we came across after looking up how to fix our issue and it worked!!!! Great job and thank you!!!!
This video was right on target! Exactly what was wrong with my Sun Joe. The nozzle was rusted. Put on a different one and all was well. Thanks so much!!
Dude, this is EXACTLY what the issue was with my PW. Ya have to be careful though, PRESSURE is already built up behind that tip. When mine came off it turned into a projectile! Like popping a champagne cork🤣🤣🤣🤣 Thank you for the video!
This really helped!! My nozzle was rested and blocked, took care of the problem of it starting and stopping.
Thanks for posting this ! A little rust was plugging the nozzle after winter storage . Need to add taking nozzle off the wand to the storage checklist. Left it in the garage last year and the wand broke . Got off lucky . Could have wrecked the machine .
This was very helpful, thank you. The troubleshooting guide in the owner's manual mentions nothing about this. It says to change the fuse, and then doesn't say how to do that. I came here looking for just that when I came across this video. I changed the nozzle and, voila! It worked. I had left a nozzle on over the winter and it rusted over. Only problem is... there was so much pressure built up in the hose that when I released the nozzle it shot off like a bullet and I never found it! Good thing I had the good sense to point it away from me... I definitely could've lost an eye! Thanks again.
You the man. Similar situation here. I open the pressure by the system and all the remaining water came out. Screwed it back in and works like a charm!!!! Save me to go out fir a replacement.
Thank you so much! This absolutely worked and saved me from buying another pressure washer in my frustration
Great tip. Couldn’t get washer to turn on. Switched nozzle and it work. Now to clean the rusted nozzle. Why doesn’t Sunjoe tell you in the troubleshooting section of their manual. Terrific to find an easy fix. THANKS !!!!
Thank you so much for showing us how to fix problems with the sunjoe. I had the same problem and could not come up with a solution. You clearly explained what the problem was and I had it back at work within 10 minutes. Thank you thank you thank you.
I'm glad this helped!
The same thing happened to me and you saved me a lot time and aggravation!
The middle nozzle that I use the most must be clogged/rusted since everything else seems to be clear and the other nozzles work.
Thank you so much!
Glad this helped!
You saved our lives haha!! Thank you!
Yup you saved me tons of time! My nozzle that was left on last Fall had rusted just like yours. Thank you for all the tips!
Cool! Glad this helped!
Simple and with good logic - straightforward presentation. Good job!
WOW- we need more people who have common sense and intelligence to make more of these videos on fixing things! Thanks to you found the video and was pressure washing shortly after! Thought it was the power switch- nope! rusty end! Thanks!
You are a lifesaver! I thought I had a 1-year-old piece of junk on my hands! I cleared the old pressure and she spraying again!
Thank you, my man your video solved my problem for two seasons. I wasn’t able to use my son Joe.
Thank you so much! My 15 degree nozzle is also messed up, and I figured it was clogged, wouldn’t have thought of rust. Thanks!
Thanks! I thought I would have to throw my Sun Joe pressure washer away. Instead of de-rusting the nozzle, because I find that it causes even more rust, I poked a fine needle thru it until I could see the light as in your video. This makes that particular nozzle usable right away.
I was going to throw mine way because it was not working I even replaced the plug thinking the GFI plug was bad. Well it still didn’t work so Google it and found this video and you guessed it it was a plug nozzle!! Thank you.
I'm glad you saved it!
... thank you sooooo much. You saved a lot of cursing and high blood pressure ..
SAVED MY BACON!! I was so frustrated I almost coded!! Thank you good sir!!
Thank you, Buddy. Another TH-cam guy said it was the GFI plug but you were spot on. Going to reference your video.
I'm going to be getting my Sun Joe pressure washer out within the next couple weeks, I will keep this in mind if I have any issues. Thumb's up!
I assumed my pressure washer was toast but Googled the problem, top hit was this video, bingo, pressure working again five minutes later. Thanks!
So glad I found your video. Same problem and I would not have thought the issue could be a rusted nozzle. Thank you! I still have an issue with some leaking at the hose connection and/or connector to stem on unit, even after replacing the original plastic connector with a brass one. If you happen to have a suggestion for that I would be very interested.
Thanx! That saved me for not having to return or junk this thing. Very much appreciate the help!
Thank you so much for making this! I was about to trash my machine when I found your video. Works good as new now. Cheers!
I'm glad I watched the whole video because it was your last tip that solved it for me. It's crazy that a clogged tip can cause the whole machine to malfunction. I guess a good soak in CLR might fix the clogged tip. Thank you for taking the time to create this video.
Glad this helped!
same here, you made my day. i had the same issue with the same yellow nozzle i use the most. followed your steps and it works!
I'm so glad I found your video, I was ready to toss this machine and buy another one ! That nozzle fix WORKED ! Thank you !
Thanks for your help!!! I put everything back together one piece at a time. It worked every time til I put on the tips. So I took your suggestion and soaked them all in vinegar then cleaned out the inside of each of them. Works great now!! Thanks!
Awesome!!
Your video saved me a lot of troubleshooting. My first step was to swap the tip. Boom. Fixed. Thx!
I had a revelation you may want to consider and even add a recommendation above into your title line. After careful analysis, I can say the tips are corrosion-resistant stainless. The main handle and valve assembly are similarly corrosion resistant. The corrosion problem is the "wand extension." It is cheap metallic "chrome" that rusts easily. When stored in the wand holder (vertically with a spray nozzle installed and pointed down) corrosion bits will collect in the nozzle until it's clogged. Solution? Remove the spray nozzles before storing for any lengthy period.
Thanks! Nozzle was exact the problem. I was about to purchase another powerwasher!!!! Thanks a million!
Thanks man!! Literally our exact problem. Pressure washer stopped spraying/turning on and the only problem was the rusted out end piece.
I just encountered this today, and it helped me fix my pressure washer!!! Thanks so much!!