Dealing with my 2007 Mazda 3, everything works but I get no sound. Keep in mind I blew out the stock Bose amplifier and don't know whether to rewire the speakers straight to the unit, or could I wire them to the new amp
Hey colton i was wondering if you could help me. i dont know the color of constant 12v in wires and it's not yellow. Also the ground wires because there is no black cable on the harness. Im installing aftermarket universal head unit. Thanks
Hi I was wondering if you could help I hooked up all my wires for harness looked it over 3 times but I have no sound coming out but radio turns on and does everything else
Check if it's muted, make sure your phone volume is turned up, if all basic steps fail then you haven't color coded your wires properly or they aren't connected securely.
Hey Colton! I have a question if you may have an idea on how to fix it. But I have a double din stereo installed. I was driving and all of a sudden it cut off and never turned back on. Could it be the fuse in the amp in the trunk? The amp isn't getting power I don't think. All the connection look solid though.
Hey Colton, I own a mazda 3 2008 2.3L hatchback & it comes with Bose Audio System. I got the same dash kit and my own double din head unit. i want to keep the top screen obviously since it shows gas millage and consumption lvl, and Ac controlls but anyways I wired the head unit to the after market wire adapter just fine plugged it in and got power to the head unit but i couldnt get any sound to play out of my speakers. is that a simple fix or is it more to it than just plug in and play? i got the idea myself the stock bose amplifire wasnt being powered to run any sound.. ? thanks
Hey Colton. Once the axxess adapter is wired and fully connected to the vehicle. Does it have to find the vehicle and radio Everytime you start your vehicle or once it finds em it's programmed to it permanently till reset
I have a Mazda 3 2013 skyactive. Went to Visions wanting to upgrade the stereo but the seller told me I would loose the display on the little lcds screens that are at the top of dashboard ,the ones that show me fuel consumption,clock, temp all that stuff ... Is this actually what happens ? And if happens is there a way to avoid it ? Thanks !
Hello is this the only 2 wires to conect for the steering wheel thingy ?
Is it possible to do an exact part list used here?
Which axxcess model steering wheel cotroller did you use
You can find the specific one you need here: www.crutchfield.ca/
what year and model is this mazda
Dealing with my 2007 Mazda 3, everything works but I get no sound. Keep in mind I blew out the stock Bose amplifier and don't know whether to rewire the speakers straight to the unit, or could I wire them to the new amp
Do i need to turn the batteri off om the car before putting the wires out the Old radio
It's always recommended to unplug your battery when doing electrical in your car, but whatever you'd like to do!
Hey colton i was wondering if you could help me. i dont know the color of constant 12v in wires and it's not yellow. Also the ground wires because there is no black cable on the harness. Im installing aftermarket universal head unit. Thanks
Hi I was wondering if you could help I hooked up all my wires for harness looked it over 3 times but I have no sound coming out but radio turns on and does everything else
Check if it's muted, make sure your phone volume is turned up, if all basic steps fail then you haven't color coded your wires properly or they aren't connected securely.
Hey Colton! I have a question if you may have an idea on how to fix it. But I have a double din stereo installed. I was driving and all of a sudden it cut off and never turned back on. Could it be the fuse in the amp in the trunk? The amp isn't getting power I don't think. All the connection look solid though.
If the amp isn't getting power, you might've shorted the power line to the fuse. Or your ground isn't connected, or a wire simply came lose.
hey boss, i had a question, is there any way i cam reach out to you
Instagram @coltonrichterr
Hey Colton, I own a mazda 3 2008 2.3L hatchback & it comes with Bose Audio System. I got the same dash kit and my own double din head unit.
i want to keep the top screen obviously since it shows gas millage and consumption lvl, and Ac controlls but anyways I wired the head unit to the after market wire adapter just fine plugged it in and got power to the head unit but i couldnt get any sound to play out of my speakers. is that a simple fix or is it more to it than just plug in and play? i got the idea myself the stock bose amplifire wasnt being powered to run any sound.. ? thanks
I know when you install a subwoofer in the Bose applied Mazda 3's you have to bypass the amp, this might be the same with the head unit!
I’m having the same issue right now. Did you ever figure it out?
How did you keep the electric red screen working with after installing a android market radio ?
I have a 2012 Mazda 3 will it be the same wire color for my year?
Yes
@@ColtonRichter thanks brother
You weren't really clear: are you selling or giving away your old 2DIN bezel or the bezel+head unit?
He said selling the unit and the bezel for super cheap. DM him on Instagram for it
@@dementedchikenjc somehow I missed that.
Would this work with a 2010 as well?
Sure thang
Does this work in a 2012 the same way also?
Yes!
What year is this Mazda 3?
2005
@@ColtonRichter Thanks
Would this work on a 2008 MazdaSpeed3?
Yes!
The control module I’m a bit lost on that
I think maybe my double din is not up to par it’s just super frustrating that it doesn’t work with my steering wheel
Feel free to send me a DM on Instagram about this, @coltonrichterr
Hello is this the only 2 wires u need to conect ?
What year is that
The car? 2005
The stereo? 2016ish?
@@ColtonRichter the car sorry
Hey Colton. Once the axxess adapter is wired and fully connected to the vehicle. Does it have to find the vehicle and radio Everytime you start your vehicle or once it finds em it's programmed to it permanently till reset
It'll be permanent, example this one installed came out of the other car & still worked!
I have a Mazda 3 2013 skyactive. Went to Visions wanting to upgrade the stereo but the seller told me I would loose the display on the little lcds screens that are at the top of dashboard ,the ones that show me fuel consumption,clock, temp all that stuff ...
Is this actually what happens ? And if happens is there a way to avoid it ?
Thanks !
You can retain it but you won't be able to control the screen or see certain functions, that's why a lot of people just get rid of it.
I wondering if I could bypass the steering wheel controls and still use an aftermarket head unit? Also wanting to swap out the door speakers
You don't need steering wheel controls to use an aftermarket head unit.
Me again 😂✌️ i swear for every mod i plan for my Mazda, TH-cam always recommend me your Vids which is quite funny 🤣. Keep it up man :D 👍
P.S. earned a sub :)
Cheers!
Still selling it by chance lol?
no sorry
👍🏻
🦗🦗🦗🦗🦗🦗🦗