I just installed this exact unit into my 2007 Mazda 3. The installation was idiot proof and smooth. I wouldn't have known about this unit were it not for your link and video. Thanks again.
hi, is it still working ok, I noticed the brown canbus, I had a Pumpkin android and it lasted 2 months, they sent another 3 canbus from china, all of them failed, I lost about £250
Looks awesome actually saving up now to replace some suspension parts and ending up wanting to fix a lot of cosmetic stuff inside the interior so I might get the mid model kinda of an early Christmas present for me 😅
Some cars also may chime warnings through factory stereos, so if the head unit has been swapped improperly, the chimes may not have been retained. This is especially likely in a CANBUS car. Can you confirm if the headlight reminder chime sounds still work after this is installed ?
hi, is it still working ok, I noticed the brown canbus, I had a Pumpkin android and it lasted 2 months, they sent another 3 canbus from china, all of them failed, I lost about £250
That's honestly a smart strategy. Though you'll never be the first to try something out, everyone else is your guinea pig and you can decide if to spend the money or not
I had the OG eonon in my MPS and it was good, but it died after a year. Put me off buying from Eonon but tbh, that does look great and i love that their stuff is very easy to install. Ill probably get one of these now
hi colton, very good video. but, how you configure the display above to check the consumption I only get the time and a message to say Raise tech, is there any way to change that message?
Hi, Any chance you know how to change the NAVI button to android auto or change the music app to something else? I can't even get play store to load (while connected to home wifi)
Is anyone else having trouble using their steering wheel volume buttons? I spliced a red cable to both steering wheel 1 & 2 wire, nothing working … is there even splicing involved?
I should also mention that I replaced an another head unit, not the factory one. There was a red wire that I had to snip in order to fully disconnect from the car.. it was a pioneer DEH-s6120BS, hope that helps
After installation does your phone icon press button on steering wheel work? And on the upper dash above the radio does your left screen work the same .the d ash that shows you how many miles are left work?
I wrote them but they dont answear :( Maybe i need a Update? Where can i get this from ? Cant find something on their Homepage. It still has android 12 should have android 13, right ?@@ColtonRichter
i cant find anywhere a cable with a 20pin option for canbus, do have any idea where i can look for it? had seen a few pics how people connect a canbox, but there is no option to ask about it on this forums (they seem to be closed)
My Problem is that the LED Screen that is above the radio does not work with the most aftermarket android radios that I have seen. I really want to keep the LED screen on top but the connector of it goes in the radio and most of the aftermarket radios dont have a connection for it. Does anyone know a aftermarket radio where I can keep the steering wheel controls and my LED screen on top of the radio?
@@ColtonRichter okay thank u I have a 2005 Mazda so my LCD Screen above the radio has an extra wiring that goes into the original radio. But the eonon unfortunately does not have a place for that wiring I think right?
@@rehanafzal8145 You can replace your 2005 LCD for 2006+ LCD. I'm have 2005 model too (Europe). I buyed a LCD from 2006 model, turn on some cables and... works!
I just installed this in my ‘08 Mazda 3. Regular speaker option Two things: How do I retain the steering wheel controls? I can’t seem to get them to work Audio quality though CarPlay seems to have worsened a lot compared to the FM Bluetooth music player I was using before. Any reason?
@@ColtonRichter I have a Gen 3 so maybe that's the difference, can u still use the center console controls? that would be the only non starter for me. honestly I got so frustrated with the stock android auto I just mount my phone and use Bluetooth. seems to have less issues but I would like a nicer sceeen. just wonder how the FL heat would affect it long-term
I had the older unit and it would not work with my Bose system. I found a video to demonstrate how to splice wires. Does this unit really work with Bose?
Hi, first of all thank you for this video. I have a 2008 mazda 3 with aftermarket amp and subwoofer installed on the stock stereo unit. Will this model M3BKA12S work?
Has anyone run into camera issues? Model: M3BKA13 Everything seems to works except the Front and rear cameras. I followed the instructions given, but can't seem to get them working.
Well...I see somewhere (I'll try to remember where)it is possible, manually connecting correct wires from power connector to original top screen connector...
Hi how you doing my name is William I am contacting you because I own a 2005 Mazda 3 2.3 hatchback and I did the same setup that you have but I just can't seem to find how to connect the upper radio screen which is off how do I connect it thank you
I got this for my 2013 Mazdaspeed 3 and it is sooo glitchy. Randomly mutes, only volume/mode buttons on steering wheel buttons work right, track button is reversed and it won't let me swap it. Phone buttons don't work. Usb and aux in center console don't work. Usb slot 1 and 2 provided freezes up the unit. Can't connect to internet without disabling auto connect. Unit is updated with the current firmware. The fitment isn't flushed. Man I feel violated! I think I got a dud?
So I kept the unit and the glitchiness solved itself. After the recent updates I was able to switch the track up and down to regular. Overall its good enough to keep. Fitment isn't perfect but beats having the OEM unit.😂
Just bought the 6gb ram version. Really liking the improved display and the speed. Question though, the steering wheel buttons arent working, is there something i need to do? 2006 mazda 3
Wait! Are u able to plug in a usb to this and charge your phone while listening to music from your phone? This is wildly important for me and will determine if I buy this or not
I have the android head unit, not sure what brand, and it comes with wireless CarPlay but I can’t use it😂I figured out how to turn it on and set it all up but it doesn’t work! I think I need the adapter
What are some of the big differences between this one you have and the Q51 pro? Besides price. I'm torn between the 2 of them. I'll be using the android features.
Just out of the gate with the M3BKA12S you'll be running on a newer & faster Android operating system, much more powerful CPU, 6gb of ram vs 3gb (huge for android systems), and a QLED screen. I've used a Q51 and find this new unit I put in a lot more responsive and easier to use.
Hey man, great video. What is the actual max resolution for youtube ? I read that the display resolution is 1280x720p but the video playback is 1080p. Its kinda confusing.
Hello, great video, I would like to purchase one but cant find it to get in Germany or Europa at all, can u recommend me a solution or smt that i can get in Germany pls :D Thanks in advance, i have the same car
I have this android screen in my Mazda 3 and I love it! It looks better than several modern cars. Sadly my Mazda 3 is from 2004, radio and LCD screen are controlled by just one cable, so I lost the LCD functionality. I bought a 2007 LCD but I need to do a soldering job and I'm scared 🥲 haha
@@ColtonRichter Hehe I already ordered a couple of molex connectors to avoid cut cables, thanks!! Will you do it too? A video would be nice! The tutorial is only at forums but not in youtube
Nope! I used to think that (I have an older model Eonon) but you can actually use the steering wheel controls (Mode button) and your old LCD will work as before. Hold the Mode button down untill you see "Setting" on the car's LCD. Then use the Up arrow button to cycle through the metrics like MPG. If you select the clock, you can press or hold the Down arrow button to set the time.
Dude I been saying I wanna keep the OEM headunit cause unpopular opinion time, I love the design of the OE headunit. But after watching this video. I for real may put this on the list of things to swap out in my car. Cause im back on my journey of fixing this car back up and tryna get in back to where it drives as amazing as id imagine it drove 18 years ago. Can you skip songs on the steering wheel too?
@ColtonRichter yeah for sure. One day I'm getting one. Cause I really want android auto. We have wireless android auto in the company truck and it's beautiful
@Colton Richter I just ordered Eonon 04-09 Mazda 3 Android 12 Wireless Apple CarPlay & Android Auto Car Radio with 2GB RAM 32GB ROM & 9 Inch IPS Touch Screen. From you’re link what’s the differences from the Octa-Core I got it on Valentine’s Day sale I didn’t have enough for the other one.
@@ColtonRichter oh that’s cool, but analog has that certain gratification to it. Plus I drive a gen2 and you know the volume control on the steering wheel isn’t as clean as it feels on the gen1 since the button has a lip to it
USE CODE: CR10
Buy at Eonon: bit.ly/4fcBKFI
You just made me reconsider this car. I hated the oem center console, but this makes it look like a completely different, more modern vehicle.
I mean you can really make any car ever a lot more modern with an aftermarket car play stereo and a backup camera.
@@HearMeLearn I mean, the profound insight you've provided will exponentially help future generations.
Just pulled the trigger on one for my 2008 Speed3. Your vid convinced me. 😊
W!
You just helped me find exactly what I was looking for, for my Mazda 3!😃🙌
I was looking for this as well
Ordered mine just waiting on it to arrive can’t wait.
Hope you like it!
I just installed this exact unit into my 2007 Mazda 3. The installation was idiot proof and smooth. I wouldn't have known about this unit were it not for your link and video. Thanks again.
Cheers 🫡
Linescrew, Does this unit have L/R subwoofer output?
Does it come with all the stuff need for install or do you still need a new install kit ?
@@ConservativeWizard It is plug and play and does not require an install kit.
Love mine, awesome addition to my 2005 Hatchback you will love it.
One day in and already do!
hi, is it still working ok, I noticed the brown canbus, I had a Pumpkin android and it lasted 2 months, they sent another 3 canbus from china, all of them failed, I lost about £250
How to volume change in full screen toothbrush
TH-cam?
Looks awesome actually saving up now to replace some suspension parts and ending up wanting to fix a lot of cosmetic stuff inside the interior so I might get the mid model kinda of an early Christmas present for me 😅
W christmas present!
Hey Leo from SA got mine last month can't wait to install it. Got myself a nice sound system to go with it.
Enjoy!
Some cars also may chime warnings through factory stereos, so if the head unit has been swapped improperly, the chimes may not have been retained. This is especially likely in a CANBUS car. Can you confirm if the headlight reminder chime sounds still work after this is installed ?
Yes, it still screams at me 😂
i bought the same head unit a few weeks ago. Its awesome !!!
Sweet!
From which website?
Just picked up a 2010 Mazda 3 Grand Touring which had it already installed. I never even knew such a device existed! And with the Bose system - WOW!
Nice, it's a lovely upgrade to have in the Mazda 3's!
Anyone else not able to locate the android 12 model on the US Amazon? It only brings up the 2010-2012 model
Really looks good, your channel needs more subscribers from BK owners
Thank you!
hi, is it still working ok, I noticed the brown canbus, I had a Pumpkin android and it lasted 2 months, they sent another 3 canbus from china, all of them failed, I lost about £250
You made that look so easy. It looks awesome! Thanks for sharing.
Cheers!
Thank you for your sharing~
Just ordered this exact model, thanks for your video.
Cheers ✌🏻
@@ColtonRichter are you finding the 6gb ram model holds up over the months?
might get one in the future, i always hold out on new products so i can see how the QC is.
That's honestly a smart strategy. Though you'll never be the first to try something out, everyone else is your guinea pig and you can decide if to spend the money or not
I must say their newest lineup is definitely their best!
I had the OG eonon in my MPS and it was good, but it died after a year. Put me off buying from Eonon but tbh, that does look great and i love that their stuff is very easy to install. Ill probably get one of these now
hi colton, very good video. but, how you configure the display above to check the consumption I only get the time and a message to say Raise tech, is there any way to change that message?
What is that other plug for at 4:00 ?
I might be wrong but that either has to do with speakers or steering wheel controls.
How does the carplay and the Android auto work? Does it have a usb connection?
You can connect by wireless or wired.
Damn! I'm gonna get this for my mazda3. Thanks for sharing!!!
Enjoy!
I'm sold. Just bought one for my 2013 Mazda3. Awesome review. Thanks!
Nice!
Hi, Any chance you know how to change the NAVI button to android auto or change the music app to something else? I can't even get play store to load (while connected to home wifi)
Shoot support@eonon.com an email!
Quick question. How did you get the steering wheel controls to work. 2007 mazdaspeed3 here. Everything else is amazing and works fine.
Double check you have everything, and I mean everytjing plugged in. If not, check on with Eonon
Has anyone had problems with blowing fuses?.7.5 amp fuse for the radio.
Reach out to Eonon support team and they can help you out!
Great vid 🔥 🔥
Thanks 💯
How is the FM/AM reception? Noticed on an older Eonon that the sound fades in/out on FM and AM is no existent. Cant get AM 730 for traffic.
Don't use it often but from what I have it seems functioning as it should!
Is anyone else having trouble using their steering wheel volume buttons? I spliced a red cable to both steering wheel 1 & 2 wire, nothing working … is there even splicing involved?
No it's all plug and play.
@@ColtonRichter thanks for the fast reply! ‘Steering wheel’ 1 & 2 are ends of wire. What am I missing here? I have the barebones setup
I should also mention that I replaced an another head unit, not the factory one. There was a red wire that I had to snip in order to fully disconnect from the car.. it was a pioneer DEH-s6120BS, hope that helps
After installation does your phone icon press button on steering wheel work? And on the upper dash above the radio does your left screen work the same .the d ash that shows you how many miles are left work?
I don't have a phone button, and you won't have control over the LCD
Hold down on the mode button on your steering wheel. When it says settings, push down for time & up for mpg, miles, av speed
Maybe u can help me...i cant controll the volume or anything with knobs on my steering wheel and i cant help myself caus i connected everything
Triple check you have plugged everything in as that's the #1 most common mistake, if not then contact Eonon support.
I wrote them but they dont answear :(
Maybe i need a Update? Where can i get this from ? Cant find something on their Homepage. It still has android 12 should have android 13, right ?@@ColtonRichter
How do you have steering control? Mine dont work! Any help apreciated
It was plug and play for me!
Hey i did everything like you did but i have no sound at all not even radio do you know what might bee ?
Contact Eonon support
Do fuction of can bus displayes on the narrow screen of the car still work? Avg consumption etc ?
You won't be able to change any of those settings due to losing the buttons, but that screen will still function on 2006-2009 models.
@@ColtonRichter it means that it can not access to narrow screen data, but that information is accessible by the new display? Or not?
i cant find anywhere a cable with a 20pin option for canbus, do have any idea where i can look for it? had seen a few pics how people connect a canbox, but there is no option to ask about it on this forums (they seem to be closed)
Don't take my word for it but i'm pretty sure these have a canbus already installed
My Problem is that the LED Screen that is above the radio does not work with the most aftermarket android radios that I have seen. I really want to keep the LED screen on top but the connector of it goes in the radio and most of the aftermarket radios dont have a connection for it. Does anyone know a aftermarket radio where I can keep the steering wheel controls and my LED screen on top of the radio?
This one lol, but not for 04-05
@@ColtonRichter okay thank u I have a 2005 Mazda so my LCD Screen above the radio has an extra wiring that goes into the original radio. But the eonon unfortunately does not have a place for that wiring I think right?
@@rehanafzal8145 You can replace your 2005 LCD for 2006+ LCD.
I'm have 2005 model too (Europe). I buyed a LCD from 2006 model, turn on some cables and... works!
I just installed this in my ‘08 Mazda 3. Regular speaker option
Two things:
How do I retain the steering wheel controls? I can’t seem to get them to work
Audio quality though CarPlay seems to have worsened a lot compared to the FM Bluetooth music player I was using before. Any reason?
Ensure you've plugged in all your cables into the back of your Eonon, common mistake people miss out on for wheel controls.
Which cable is 4 the steering wheel? Shouldnt it work with can bus ?@@ColtonRichter
why not setup the canbus? so you can use your console buttons/knobs
It's all pre-wired / plug & play.
@@ColtonRichter I have a Gen 3 so maybe that's the difference, can u still use the center console controls? that would be the only non starter for me. honestly I got so frustrated with the stock android auto I just mount my phone and use Bluetooth. seems to have less issues but I would like a nicer sceeen. just wonder how the FL heat would affect it long-term
I had the older unit and it would not work with my Bose system. I found a video to demonstrate how to splice wires. Does this unit really work with Bose?
This unit should be plug in play with your factory Bose.
Thanks I used the link and ordered it. I'll let you know. I have 3 2009 Mazda 3's
I got this and installed it but the steering wheel controls don't work. Did miss something?
Shoot Eonon an email!
Hi, first of all thank you for this video. I have a 2008 mazda 3 with aftermarket amp and subwoofer installed on the stock stereo unit. Will this model M3BKA12S work?
Yes :)
Has anyone run into camera issues?
Model:
M3BKA13
Everything seems to works except the Front and rear cameras.
I followed the instructions given, but can't seem to get them working.
Reach out to Eonon's support team so they can resolve your issue! 😄
where is the amplifier for speakers?
Heyy...but what happens with top screen? Not working?
04-05 won't retain the top screen, however 06-09 will be able to use the top screen.
Well...I see somewhere (I'll try to remember where)it is possible, manually connecting correct wires from power connector to original top screen connector...
Hi how you doing my name is William I am contacting you because I own a 2005 Mazda 3 2.3 hatchback and I did the same setup that you have but I just can't seem to find how to connect the upper radio screen which is off how do I connect it thank you
I believe 2005's like I mentioned in the video, will not work with this setup
@@ColtonRichter oh 0k thank you
I got this for my 2013 Mazdaspeed 3 and it is sooo glitchy. Randomly mutes, only volume/mode buttons on steering wheel buttons work right, track button is reversed and it won't let me swap it. Phone buttons don't work. Usb and aux in center console don't work. Usb slot 1 and 2 provided freezes up the unit. Can't connect to internet without disabling auto connect. Unit is updated with the current firmware. The fitment isn't flushed. Man I feel violated! I think I got a dud?
Potentially, I haven't had problems to that extent on any Android unit i've used
Just my luck. I've waited so long to upgrade my headunit. I guess I'll return it for a replacement. Hopefully it is a faulty unit.
@@rawy310 What was the outcome?
So I kept the unit and the glitchiness solved itself. After the recent updates I was able to switch the track up and down to regular. Overall its good enough to keep. Fitment isn't perfect but beats having the OEM unit.😂
Does it come with a backup camera? If not then can I install a backup camera to this system?
No, but yes
Splendid Review Bro. Just concerned/curious about the USB part tho. How th flash drives connect?
If I'm not mistaken, I believe flash drives are connected by the USB dongles included.
Hey, has anyone figured out how to enable the steering wheel controls?
Make sure plugs are all in, if having issues contact Eonon
I figured it out. All you have to do is plug in all the cables and it just works lol
I’m thinking to purchase it, my doubt is , Do I need just unplugged/plugged this news stereo? And that’s it?
Just like the video!
Mine just came in just now ooooooo I’m so ready for it
Can u adjust volume while in full screen video?
Which plug controls the steering controls ?
I'm not sure I just plug them all in lol
Thank you for the video! I want to try this! Do I need to disconnect the battery first?
I don't believe it is necessary, but it doesn't hurt to be safe!
Omg it’s exactly mine ☺️☺️☺️I love it
Just bought the 6gb ram version. Really liking the improved display and the speed. Question though, the steering wheel buttons arent working, is there something i need to do? 2006 mazda 3
I'd check in with support!
th-cam.com/video/P0suhaVKObQ/w-d-xo.html
What is the Exact No for Mazda 5
Eonon does not supply units for Mazda 5.
Can you still check the current fuel average on the lcd panel if you install an android head unit?
No
Do you know if this will work when install after market subs in my Mazda?
Yes
Will it power some subs and high ends I have 2 10s and am wondering if it’s a good head unit for that purpose
I believe so, double check stats on the product page
Wait! Are u able to plug in a usb to this and charge your phone while listening to music from your phone? This is wildly important for me and will determine if I buy this or not
Of course!
I have a 2006 mazda3. Will my lcd screen still work with this head unit?
It should yes
Good day my steering wheel controls not working
Contact Eonon
I have the android head unit, not sure what brand, and it comes with wireless CarPlay but I can’t use it😂I figured out how to turn it on and set it all up but it doesn’t work! I think I need the adapter
Trade it out for this one 😉
@@ColtonRichter haha I wish! 😂
What are some of the big differences between this one you have and the Q51 pro? Besides price. I'm torn between the 2 of them. I'll be using the android features.
Just out of the gate with the M3BKA12S you'll be running on a newer & faster Android operating system, much more powerful CPU, 6gb of ram vs 3gb (huge for android systems), and a QLED screen. I've used a Q51 and find this new unit I put in a lot more responsive and easier to use.
@@ColtonRichterI have a Q51Pro sitting in my garage and I have yet to put it in. Too late to return it. Is the Q51Pro still great?
You made me buy it. you should get monetized by enon. Nice video thank you!
Enjoy!
Hey man, I know this video is 5 months old, just wondering how the head unit is holding up. Would you still recommend this unit?
It's been great!
How do I get that for my son first car
Link in description :)
Hi Colton, great video. How is the sound quality? Has it affected the stock speaker quality in any way?
It will give you more power to your speakers resulting in better sound quality
was this the M3BKA12S version. i got the android 10 version of it. awesome head unit!! what other apps it come pre loaded with....
Yes!
Ho but the clima control display ? (Original Mazda)
Climate control screen will stay from 06-09.
Are the controls able to be changed to suit rhd market?
Contact Eonon!
i got a 2008 mazadaspeed3, this should fit right?
Yes
Hey dude, great content as always. On Mazda 2008 how can you control the LCD functions with this Android screen or this is not possible? Thanks.
Not possible.
Is it able to use TH-cam on car play?
You can use TH-cam from the Google store, it will be installed on the system.
Do the wheel controls still work with this upgrade?
Yes
Hey man, great video. What is the actual max resolution for youtube ? I read that the display resolution is 1280x720p but the video playback is 1080p. Its kinda confusing.
TH-cam will playback at 4k if the video was uploaded at that, but the Eonon displays at maximum 720p!
Will this fit on the MS3 Hatch as well ?
Yes
thank you kind sir !
@@ColtonRichter
This does work on the mazda 3 sport 2007, right?
Yes
Can u still see your fuel consumption with this unit
I believe so, double check with Eonon
did you ever find out?
No usb port for music.
Use your USB plug-ins included with your Eonon to attach a drive or your media device.
Hello, great video, I would like to purchase one but cant find it to get in Germany or Europa at all, can u recommend me a solution or smt that i can get in Germany pls :D Thanks in advance, i have the same car
When you visit their site it should ask you what region you're in, if not scroll to the very bottom where you can change it.
Awesome looking good
I have this android screen in my Mazda 3 and I love it! It looks better than several modern cars.
Sadly my Mazda 3 is from 2004, radio and LCD screen are controlled by just one cable, so I lost the LCD functionality. I bought a 2007 LCD but I need to do a soldering job and I'm scared 🥲 haha
Have a go, it isn't too hard!
@@ColtonRichter Hehe I already ordered a couple of molex connectors to avoid cut cables, thanks!!
Will you do it too? A video would be nice! The tutorial is only at forums but not in youtube
I won't personally, I like having my little cubby slot!
Mine is also 2004 and I bought 2007 screen it's working perfectly
@@НадяГенева with the 7 wires soldering job, right?
Hows the rear camera work with the manual shift?
When you put in reverse, the camera will show up automatically
@@ColtonRichteris their a video you made on installing a back camera?
@@ColtonRichterif you don’t install a backup camera, do you get a blank or black screen while in reverse?
@@anthonyl4894 black
Do they make them for the 2018 sedan?
No mate sorry!
Does it work if u have amps and subs?
Yes
Are you still using this? I heard Eonon gets slow/buggy after a bit.
Yes, still works great
mazda 3 2012??
If you installed this in the Speed, do you lose the “Info0 button functions where you can view mpg, miles remaining on tank, etc.?
Correct, using any aftermarket head unit in a MazdaSpeed 3 will lose that function
Thanks for the info and the video!
No it’s working fine and I can set the clock of the little stock screen through the head unit
Nope! I used to think that (I have an older model Eonon) but you can actually use the steering wheel controls (Mode button) and your old LCD will work as before.
Hold the Mode button down untill you see "Setting" on the car's LCD. Then use the Up arrow button to cycle through the metrics like MPG. If you select the clock, you can press or hold the Down arrow button to set the time.
@@DavetheDONcan you please upload a video to show?
Dude I been saying I wanna keep the OEM headunit cause unpopular opinion time, I love the design of the OE headunit. But after watching this video. I for real may put this on the list of things to swap out in my car. Cause im back on my journey of fixing this car back up and tryna get in back to where it drives as amazing as id imagine it drove 18 years ago. Can you skip songs on the steering wheel too?
Yes you can use the skip button. Phone control doesn't work though
I can understand but these radio's are definitely game changers! All steering wheel control functions the same like OEM :)
@ColtonRichter yeah for sure. One day I'm getting one. Cause I really want android auto. We have wireless android auto in the company truck and it's beautiful
@@bricegraham8256 I love wireless CarPlay, so useful & vibrant 😍
Does it still work ok? Is it draining your battery
Yes & no battery drain
@ColtonRichter so yes its good and no on battery drain...cool
What inch of head unit?
This is a 9" Screen!
Buti nalang napa nuod ko to naka save pa ko 500 sa labor mag pa palit lang ng head unit🙄, thank you sir for the tutorial🥰.
Bro, alin sa dalawa binili mo yung Q51SE or M3BKA12?
Does it work with speed 3?
Yeah!
what a coincidence. I just installed an Android 12 apple carplay on my gen3.
Definitely needed in the 3rd Gen!
Wow steering wheel buttons are working 😮
LOL right? 😂
@@ColtonRichter right
@Colton Richter I just ordered Eonon 04-09 Mazda 3 Android 12 Wireless Apple CarPlay & Android Auto Car Radio with 2GB RAM 32GB ROM & 9 Inch IPS Touch Screen. From you’re link what’s the differences from the Octa-Core I got it on Valentine’s Day sale I didn’t have enough for the other one.
Kinda wish i woulda seen this before i spent like 250 on an aftermarket pioneer stereo lol oh well i suppose.
😂😂😂
But the volume knob tho!!
The touch volume is very sensitive and user friendly, as well as being able to use the steering wheel controls for that button feel!
@@ColtonRichter oh that’s cool, but analog has that certain gratification to it. Plus I drive a gen2 and you know the volume control on the steering wheel isn’t as clean as it feels on the gen1 since the button has a lip to it
Ah I do remember the 2nd Gen volume button being silly