agree but i would likje to see more of this cause he can make it special i mean its nice to see cars get to run but this is so much more nicer to look at.
@@PuddinsFabShop as an old dog I watched you laying out parallel lines. A company I did development and prototyping for may have some simple hand tools to help with laying out stuff . I'm 52 and I've been making stuff more dangerous for about 50 of them. I survived sticking a metal screwdriver into a 240volt socket 13amps at 2 years old after watching my dad use matchsticks to make a plug. I will reach out to them on your behalf if you would like. Be well and stay safe.
Love your eng. on the front end of the fenders the cross member was the right choice in my open. good work . Now on to the fenderwells and battery box.
Looks like you are one of my 3 favorite channels now along with Halfass Kustoms and D and D Speed shop. Have been watching your channel for quite some time but am binge watching old videos now and I am realizing your amazing talent. Thanks for sharing. 👊😎👍 👉🇺🇸👈
Looking forward to seeing more videos on this build out. It's looking really good and coming along well Puddin. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.
Really solid work man. That battery tray is what every battery tray wishes they were. You know how you're always telling us to go work on our projects? Well, the way you did your tray makes me want to commit to redoing my battery tray in my LS swap jeep cherokee because my battery situation is similar to how yours was here. Keep up the great work.
I am here because @DEBOSS GARAGE recommendation, and until now I had never heard of a Travelall. Love the work you are doing and your commentary is just right. However being from a part of the world where the metric system rules (Australia) I struggle a bit with 1/8s 3/16s and all the other fractions of an inch.
I’d use a small racing battery move it under dash or behind under bench also put master cylinder under floor pan tuck and clean engine bay awesome work ! ! !
I know ls engine swaps are the greatest choice , but I'm a great fan of the original harvester engine. I used to work on them , powerful and last forever with the simple holley carbs they came with.
I’m new to the channel, I really like theses type videos, the music and just getting it done, your latest stuff is funny and fun to watch, but these are really cool and I like seeing how you come up with ways to fix things like the battery hold down and box, keep up the good work and we’ll keep watching
Thanks! If you want a garage before your project be sure to try and set goals and time lines. This will help get there! With all the stuff going on today it’s easy to blink and a years gone by!
Hey Puddin!! Play more o dat Disco music. I almost got up a started to get down. Just kiddin. I really like your channel. By the way, do you need any remote starter switches?
Man pudding we let you hang out with morski for one weekend and you really step up your game on this fabrication thing imagine what it would be if you spend a week together LOL
Have you ever tried tacking the nutserts to prevent them from spinning? Just a thought, anytime I use them shits they want to spin. Maybe I'm not installing them correctly I guess.
Is this way back before you got that "Jacob Warner" battery sponsor? I may have missed you mentioning him, if that's even your real name. This is my sense of humour, sorry in advance. Great video, loving the series.
Im glad I came back to watch these older videos. You are funny and have a loot of good information
agree but i would likje to see more of this cause he can make it special i mean its nice to see cars get to run but this is so much more nicer to look at.
Great watching Edna coming together again. Great a 2nd time 4 years later. Puddin has grown so much into a great dad and business guy.
Love the sweet purple and pink rides by the metal brake. Nice touch with the handlebar tassels. A true taste of garage sharing with the kid's bikes.
That’s the only shop space I share! Lol they roll outside easy!
Nothing over complicated about that, just simplicity. Fantastic work! Cant wait to build my truck.
Thank you! What truck do you have?
@@PuddinsFabShop 1989 ford ranger.Putting a 427w in it. Doing mustangII front end etc alot of work ahead.
Awesome good luck with it!
Nice and tidy but functional battery tray. Oh ya 😎
👊🏻👊🏻
That Battery box turned out nice.
👊🏻👊🏻
I really like that you show a "use what you have on hand" style of fab/building.
Thanks! I try and make it look good tho!
Rivet nuts for the win today. Love those thing. Travelall is looking great
They are very handy! Thank you!
Not only does it look great when you get done you will be able to take it all apart with 1 socket on a drill that’s sick!!!!!
It’s makes it convenient for sure!
What up, getting there bro, lookin dope, proofs in the puddin 🤙🏾
Thanks man!
Great job, I'm glad to see you reuse original parts. It all looks factory original keep up the good work.
Thanks! I want it to look like gm put it in there
Its great to revisit and watch thks
Well thanks for coming back!
That's a classy build. The attention to detail is so great. I need to get a nutsert tool someday. That really makes it nice.
They are fairly affordable
Nice work - it’s really satisfying to fabricate stuff and make things neat and functional.
I agree!
Thanks for the videos they push me to finish up my projects
That’s what I like to hear!
Cool stuff. Make do and mend is the way. If possible that is. Be well and stay safe.
👍🏻👍🏻👍🏻
@@PuddinsFabShop as an old dog I watched you laying out parallel lines. A company I did development and prototyping for may have some simple hand tools to help with laying out stuff . I'm 52 and I've been making stuff more dangerous for about 50 of them. I survived sticking a metal screwdriver into a 240volt socket 13amps at 2 years old after watching my dad use matchsticks to make a plug. I will reach out to them on your behalf if you would like. Be well and stay safe.
You got some awesome mad skills. Your videos are great.
Thank you!
That top strap made that solid.
Man, I love nutserts!
(that didn't sound right)
Such simple design decisions, but they make a huge impact. Tons of work also lol
Absolutely!
Always enjoy the music
Picking music is the worst part
@@PuddinsFabShop where do you get your music from?
TH-cam. It’s part of their studio and I use the stuff that’s free to monetize with. I’m not trying to get sued lol
@@PuddinsFabShop really? I'm surprised, that you tube would have anything decent in their free selection
Love your eng. on the front end of the fenders the cross member was the right choice in my open. good work . Now on to the fenderwells and battery box.
Thank ya! It all worked out good.
My Dad is Patrick. He passed away in June... he watched all your videos... thank you for making him smile.
Awesome work! Keep the videos coming! Nothing wrong with nut certs! They make life so much easier!!
I agree! Thanks for watching!
Really cool how you recess that battery nice job
Thanks!
Love going back to see how it all started
Looks like you are one of my 3 favorite channels now along with
Halfass Kustoms and D and D Speed shop. Have been watching your channel for quite some time but am binge watching old videos now and I am realizing your amazing talent. Thanks for sharing.
👊😎👍 👉🇺🇸👈
Cool, watching all of your previous videos
So much content love it keep it coming!!!!!
Thank you! Will do !
Cool project, I grew up in International's, and I have a few of my own. Thank you for your service to our country 🙏!!
Awesome, thanks for watching! No problem!
Beautiful job👍
Thank you Robert!
Nice work .. keep it up
A follower from Iraq ..
Thank you!
Looking forward to seeing more videos on this build out. It's looking really good and coming along well Puddin. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.
Nice work and great video. You got me thinking I might do a older Travelall after I finish my 800 A.
Thanks fish guts! I love mine and I haven’t even got to drive it yet!
Really solid work man. That battery tray is what every battery tray wishes they were. You know how you're always telling us to go work on our projects? Well, the way you did your tray makes me want to commit to redoing my battery tray in my LS swap jeep cherokee because my battery situation is similar to how yours was here. Keep up the great work.
Another great video of the travelall build.
I am here because @DEBOSS GARAGE recommendation, and until now I had never heard of a Travelall. Love the work you are doing and your commentary is just right. However being from a part of the world where the metric system rules (Australia) I struggle a bit with 1/8s 3/16s and all the other fractions of an inch.
Thanks for watching! I struggle with the metric system lol
The LS looks comfortable in its new home.
I think so!
great job. sure have enjoyed all your videos on this truck, thanx
Thanks for watching!
Dang fine job¡!!!!!!!!!
👊🏻👊🏻
Digging it!!
Thanks!
As always another great job like mid week video keep them coming
Thank you! I try to post every Wednesday!
Watching all the videos on this build ! Why ?? Your on the money 💰
Love those old travelalls
LOVE THE TRAVEL ALL VIDEOS!!! THANKS PUDDIN!!
Like that Battery tray idea pretty cool
I think everything you just did all looked awesome!
looks dope dude
Thanks!
I’d use a small racing battery move it under dash or behind under bench also put master cylinder under floor pan tuck and clean engine bay awesome work ! ! !
Thanks! A look like that is not really what I’m going for.
Hey Jacob good job on the battery tray...I like how it’s coming along...your friend ToolTech&More!
Thanks man!
Great job and it's looking good. Another great video 👍👍
Thank you for another comment 👊🏻
I know ls engine swaps are the greatest choice , but I'm a great fan of the original harvester engine. I used to work on them , powerful and last forever with the simple holley carbs they came with.
Good idea with the nut serts, I'll have to do that with my car
They are handy!
I’m new to the channel, I really like theses type videos, the music and just getting it done, your latest stuff is funny and fun to watch, but these are really cool and I like seeing how you come up with ways to fix things like the battery hold down and box, keep up the good work and we’ll keep watching
Nice work! Looks amazing!
Thank you!
Really like the battery box
Cant wait to get a garage to get me a project love what you do!!
Thanks! If you want a garage before your project be sure to try and set goals and time lines. This will help get there! With all the stuff going on today it’s easy to blink and a years gone by!
Fantastic detail and patience!!
Man you do great work sir!!
Thanks Big Lon!
Love what u doing with it
Nice one puddin...Thank you...from South Africa
Always delivering great content
Nice job. You got some skills 👌
Hell yea coming along
Thanks Tim!
What an excellent job!
Very nice detail!
Are the rivets that you are using threaded? I see that you were putting the bolts in with the impact driver. Awesome video's!!! Thanks!
Yes, they are nut serts. They thread onto the tool and “rivet” them in and then unscrew the tool and your left with a threaded hole for a bolt
Nice work! I hope it clears tires at full drop.
It will!
Great fabrication work
Hey thanks for these videos! It’s awesome!
Thanks for watching!
You are doing great. Love your video's.
Good info.
👊🏻👊🏻
Have a 66 panel putting on a 02 Tahoe .do like yours ! Would like to have a look at welding cart with plasma on it
Thanks. I don’t have any close up of it unfortunately
I like using nutserts. I’ve been looking for a air gun. My old job had a few for 1/4 20 ‘serfs. Used them everywhere.
Good clean work ..nice 💪🏆
I like it 👍
Thanks!
Looks awesome 👌
Love what you're doing! I'm building a 67 Travelall right now with the same 5.3 vortec swap. Will you be doing a video on wiring?
Not really but kind of. My buddy re worked the harness but I have plenty to do on it. So I will but it may not cover everything
That looks great!
Great fab job as usual! How do I get a couple of your Puddin’s Fab Shop stickers?
PayPal or money order. I’m behind on the times.
you do good work brother. i want a Puddin's Fab Shop t-shirt. where can i get one.
If you have PayPal you can send me money on there and I can get you one sent out!
Hey Puddin!! Play more o dat Disco music. I almost got up a started to get down. Just kiddin. I really like your channel. By the way, do you need any remote starter switches?
I’m good on switches!
👍
Man pudding we let you hang out with morski for one weekend and you really step up your game on this fabrication thing imagine what it would be if you spend a week together LOL
Have you ever tried tacking the nutserts to prevent them from spinning? Just a thought, anytime I use them shits they want to spin. Maybe I'm not installing them correctly I guess.
How sharp of a bend can you get with your Hf modified bender? You still liking it? I'm going to have to get or make something.
I haven’t adjusted it in awhile to sharpen it up. It’s still adjusted for thicker stuff right now. I’m happy with it tho
Great video as always dude!
Thank you!
Awesome build of that ole Cornhusker!! I was wondering what exhaust manifolds you put on the LS? Thanks
Never mind, I looked at a previous video you did and saw that they are the eBay blemish ones. Look good!
That’s them!
I do believe you could open your on shop. what is the brand name of your nutsert tool. as all ways awesome work.
Here you go, thanks! www.amazon.com/Riveter-Riveting-Setting-totally-mandrels/dp/B00R1FYLWU/ref=mp_s_a_1_7?keywords=nutsert&qid=1581534763&sr=8-7
Great video.
If you don't mind me asking. Where did you get the nutsert tool?
awesome video
Hey mate where did you get the speed nuts from
Here you go man! www.amazon.com/Riveter-Riveting-Setting-totally-mandrels/dp/B00R1FYLWU/ref=mp_s_a_1_7?keywords=nutsert&qid=1581534763&sr=8-7
Great vid
Great job!!
Love it❤
👍😁
👊🏻👊🏻👊🏻
Good video.
I can't get anything done because I'm sitting here on my butt watching your videos , LOL ,. More fine work young Man !
Thank you! If you’re going to sit on your butt, at least watch some Puddin’s Fab!
👍 From Cadillac Michigan
Nice
👊🏻👊🏻
Is this way back before you got that "Jacob Warner" battery sponsor? I may have missed you mentioning him, if that's even your real name. This is my sense of humour, sorry in advance. Great video, loving the series.
It’s way back when!