Great video! I have to service a Toto. I think it may need a new gasket because its leaking from the floor and not the angle stop. I've never taken a toto apart before so this is very helpful.
Will the rough in fit a 3" flange? Bc the lip on the bottom wont fit through the 3" flange. And I'm looking at mine. The back part isn't flush with the front part so if I install it it looks like it will sit at an angle. Is it supposed to be that way?
Did you put the required washers on the toilet seat bolts? Looked like you just screwed them into the rubber washers that were pushed through the holes?
Hola buen trabajo pero como es la parte donde se ajusta los tornillos de ajustes de los lados cuando se pone ya el toilet quiero decir la medida que no se ve en el plano..gracias
Best time to install a toilet is BEFORE you have to paint around it and install molding. I like it when its too easy and you need to make just that much more of a pain in the ass.
I hate this fucking toilet, while it flushes great, it doesnt clean well at all, you have to aim at the deep 4" section that contains water, unless you want to flush 6 times to clean it. Always wondered how to remove the toilet. DONT buy. Great video.
![[4K직캠] BABYMONSTER(베이비몬스터) - FOREVER](http://i.ytimg.com/vi/PS3UAFto1z8/mqdefault.jpg)
Referenced your vid many times while installing one in my house. Great content bro! You’re appreciated
Thanks for the video. I did what you did…. it’s pretty clear that you work faster than me. 😃
Your drill man was trying his best to break that Drill Bit in the first video, a maniac!
Great video! I have to service a Toto. I think it may need a new gasket because its leaking from the floor and not the angle stop. I've never taken a toto apart before so this is very helpful.
Excellent video! Thank you.
Gracias amigo por la installation muy Bien entendida. Thanks bro
great video!!! thank you! now I know what i have to do!
Great video, I’m installing one in my house next week. Appreciate the ‘no talking’.
Thanks for this!
Will the rough in fit a 3" flange? Bc the lip on the bottom wont fit through the 3" flange. And I'm looking at mine. The back part isn't flush with the front part so if I install it it looks like it will sit at an angle. Is it supposed to be that way?
Did you put the required washers on the toilet seat bolts? Looked like you just screwed them into the rubber washers that were pushed through the holes?
The installation distance of my toilet toilet is not a regular 12inch but a 10inch. Can I install this toilet?
Nice vid. Is the toilet a 12" rough-in flange measurement ? How far is back of tank to wall ?
Nice! Thank you for sharing. I have a CT442CUFG40#01. Does it have the same installation procedure?
They should have painted the wall behind there first. At least one coat.
Lmaoooooo you must go thru a shit tun of drill bits drilling like that LOL I watched you flex the bit on every hole !!! LOL
thanks for watching!! 😉
Ours we just installed yesterday and has an incredibly slow leak at the base. Tips?
Good video but why use a drill for connecting the screws into toilet and not hand tighten when time comes to take off will be a headache
Hola buen trabajo pero como es la parte donde se ajusta los tornillos de ajustes de los lados cuando se pone ya el toilet quiero decir la medida que no se ve en el plano..gracias
do you like the way it flushes??
💯
But how does the toilet tank lid attach?
I thought Toto puts the fill hose on the outside of the tube. I don’t understand why?
How to fix it if it's leaking at bottom of the tank？
What is the model of the toilet seat
How long did it take to install?
Best time to install a toilet is BEFORE you have to paint around it and install molding. I like it when its too easy and you need to make just that much more of a pain in the ass.
So , toto, toilets are compatible for , your standard toilets .. looks like a lot of work
👍🚽
Why the flush is so weak? Same thing happen to mine
Unfortunately, this is how this model works.
I have this one, it is not weak, it is rather powerful but just quiet. I has not clogged for several months for me.
Absurd
I'd charge triple to install these
This tolit sucks, I have one kids always poop on the front where the water doesn't reach. Changing the seat and now the bolt won't tighten.
The installation was hell, never again. Not worth it, you can buy an American toilet and install a washlet seat. Works perfectly 🥰
Drilling holes where water can leak.. nope
REALLY?? 🤨
No 👍🇲🇽💪
I hate this fucking toilet, while it flushes great, it doesnt clean well at all, you have to aim at the deep 4" section that contains water, unless you want to flush 6 times to clean it. Always wondered how to remove the toilet. DONT buy. Great video.
Смыв сифоном круче
seems like weak flush
Not weak, just quiet. It's a washdown.