this for sure. it needs to have a stock looking a/c switch that wakes it up, so you could even let someone else drive and it just feels like a really peppy, stock marauder, even if you floor it lol
All of these crazy expensive supercars are running 700 at the crank. Here we have a sleeper putting down 700 at the wheels and sounding stock at ordinary speeds. Very cool build.
If they added a manual boost controller inline of the dump valve they could control when that dump valve opens.. I have that same setup on my big turbo Audi and I can keep it in "sleeper mode" longer or have it crack open and let all hell break loose at 3 psi like they have here..
He kinda went over it in one of parkers videos. But he's just basically wet sanding the paint to 3,000 grit and hitting it with some compound and polish on a buffer. You can get good results if there is enough clear on the surface, but if you go through to the base coat you'll be in for a paint job. If a car is just dirty and kinda hazy looking it makes a huge difference. If the paint is faded in spots where the sun hits it, and it has clear coat flaking off there isn't much you can do. You can make it shiny in spots, but if the clear is flaking off anywhere its probably really thin on the entire car and you're going to make a bigger mess trying to buff it than just leaving it alone until you can get it painted.
@@jaydunbar7538 It's literally what he said he does on Parker's video. He went over it when he was polishing that car last week. If you want it to look nice especially on a black car you have to do it right or you will get swirl marks everywhere and it will look like crap.
@@jaydunbar7538 Ill give you that its not complicated, but it can have a steep learning curve for the uninitiated. I've seen many people destroy good paintjobs burning through the clear.... If you have ample clearcoat, you're good. But 95% of people dont know WTF they are doing and can make things far worse.... I'd say for most, stick to hand polishing, clay bars, etc. You can still get quite nice results and not screw anything up TOO terribly. Or find someone in the know, who is willing to teach you. (even if you have to pay them)
Lonely getting old? My grandpa & great grandpa said it was the best time of their lives being retired and doing whatever he wants' Getting older doesn't mean getting lonely unless you make it that way. Age is just a number, not a disease.
It's a shiny marauder. Id be suspect of it not being stock in that condition. Sure they are rare but it's one of those cars only car guys qould notice, and it sticks out. Just like a Grand National, or an early 90's SHO. You see a gem like that in that kind of condition I would not think it was stock
It's going to be so great to see Sam driving that on sick week. It is a shame that Ed never got to see neighbor run. I'm thinking Ed will be riding with him for good luck. Who is going to ride with Sam all week? Ty should be out there too
sick weeks going to be insane with the group of people doing attending especially with all the first timers. hopefully it helps the other race week events grow as well.
I love it when Dr Tune Em All is in videos. He balances out the other characters so well. Great video and glad to hear Sam will be driving this on Sick Week!
Unless it has been changed the Marauder comes with a 3:55 axle stock. Plus it wouldn't hurt to pull the axles and see if they are failing where the axle bearing rides. They had a problem with them failing. TSB 03-5-5. When I replaced the gears with 4:10 I found both the axles on my Marauder were failed.
Watch Cleeters Bros channel, Teeth and Turbos. Sam goes into the detailing a little bit. If I remember correctly he created a line of detailing products which are still available today
You have a great team, please let us know more about each of them, IE their skill sets and interests. You have done a great job already, super production values, super cars, super humor, way to reach way down inside for all the quality that you can. Shine up that fish. Thanks for the great videos!!
YAWWWWWNNNN...Marauder content is great for helping me fall asleep almost works as good as jet boat content...although boosted boiz content takes the crown for best sleep inducing content I must say holy hell!
Dyno day is like Christmas day for ole Cleeter. He gets so excited and giddy lol singing and talking about more boost. Puts a smile on my face. Shout out to Sam for that mirror finish!
Listening to your video through headphones 🎧, when that thing spooled up it’s sings. Now high octane It definitely blows the cobwebs away. You guy’s rock. Cheers from the Uk.
When you strap the front wheels you should make sure your pulling the wheels from the front. The driver side you had the wheel strapped to the bottom, when the front end lifts up during the pull it loosens the front straps. I’ve seen it rotate the front tire and loosen the front strap and kick the car off the dyno before.
Of course most all of us normal human beings r jealous of being able to play with dream toys all the time.but you have an amazing team of people there!great bunch!thanks for the entertainment buddy!
Can you guys please do a video showcasing what Sam is doing to the paint on all of the fleet? Like what products he is using and what tools. He is a god with making the cars look good.
If you watch cleetus' brother channel teeth and turbos he does a full length interview with Sam. In the interview Sam explains how he founded a car detailing supply company and explains the products.
Yeah I like the idea of Ty getting his build but cleetus can’t keep making builds for everyone of his employees at one point this needs to stop unless Sam gets a build because unfortunately as we all know his times running out
@@Ridinglawnmower145 so George got a build, who else..? I agree Sam should get one too but 1. He's piloting the marauder for sick week and 2. Ty is the one making all these builds happen in terms of fabricating together the amazing parts that Cleetus provides
@@georgedunkley6561 back to my point tho cleetus can’t just keep handing out builds because they always end up in some tricked out 427 with motion parts
Ty has a truck or something that he’s working on from home, I believe. Sam has his own shop that’s pretty well set up. It was featured in a previous Cleet video. Those guys are fine where they’re at.
The beautiful black 700hp 'street' Marauder on that NEW FLOOR looks AWESOME! Imagine the looks on the dude or dudette's face who attempts to take that beast on in a LIGHT to LIGHT street dash! They will mess their pants when they see it rocket away!!
Dude yes! They need to do that, or Gumball 3000 or even getting some cheap ass car like one of the racing Crown Vic's into the Gambler 500 would be bad ass!
You should definitely make a psa to most of the kids that watch and explain how you can use ethanol because of certain parts you have and how it will basically eat the fuel system of a car not made for it. It gives you gains but will not do the same for most cars on the road. Stay safe out there and don’t mod your vehicle unless you are willing to put work in it.
Dr. Tuneemall had me dying “ yeah you have all of it, the gauge went 80,81,82,83, all of it. So your good” is by far the funniest shit I’ve ever heard. God I love this crew!
WTB kart races at the FF! Drag cars are sweet but would be fun to see some shop time shenanigans racing some little karts around the burnout pad or something!
Be sure to check the rear axle Bearings have seeing these in stock mode chew directly through the axle. But this sounds killer! Sam great paint work! Glass finish
Add a 3rd peddle to the dead peddle (like an old school high beam switch) and make it a manual override to the vacuum diaphragm so you can open it at will
Ty been doing an amazing just on the turbo installation but what about Sam? He’s killing it on making Ruby, Marauder and Rocky fresh and so clean. Shubuddy
I can see it now, Sam sitting at a light in the marauder, some young fool pulls up in a hellcat, and Sam gives him a little rev. Boyo in the hellcat floors it, but Sam gorilla stomps the loud pedal, the cutouts open up, and Sam is taking trust-fund Trevor to gapplebees for a waaah-burger and some french-cries. Sam is the hero we need, that none of us deserve. It's gonna be AWESOME to have him piloting that unit for sick week.
Thanks for carrying the torch for internal combustion guys. With so much electrification shit everywhere now it's so refreshing to hear a V8 boosted by two turbos making 700HP at the wheels.
@@Simon-747 I think we are talking about a cart to use to drive over from Sam's shop/house which is a few houses down from the shop across the street from James
Gareth love what you have done with the car - Ty is genuinely an asset to the crew and always busy. PLEASE check the rear end,axles in that car for Sam's sake He is such a lovely loyal guy and an addition to your great crew. A little bit of safety for Sam's sake is a great thing
You need to convert the AC temperature knob, into the boost controller. So when a passenger is in there, you can turn the AC up for the power
Best comment this year, we need this to happen!
This!
LIKE THIS SO THAT CLEET SEES THIS
this for sure. it needs to have a stock looking a/c switch that wakes it up, so you could even let someone else drive and it just feels like a really peppy, stock marauder, even if you floor it lol
it is Florida, need that control still on the real AC lolololol
All of these crazy expensive supercars are running 700 at the crank. Here we have a sleeper putting down 700 at the wheels and sounding stock at ordinary speeds. Very cool build.
If they added a manual boost controller inline of the dump valve they could control when that dump valve opens.. I have that same setup on my big turbo Audi and I can keep it in "sleeper mode" longer or have it crack open and let all hell break loose at 3 psi like they have here..
Gotta get Sam to put his touch on the dyno Marlin.
Looks like he did towards the end of the video, it was all shiny.
Sam could shine my Marlin. No homo.
That's worth 50 horsepower
@@jay_wright yeah was going to say it went from really dusty to really shiny by the end of the video, lol.
Heck, they should teach Sam to do the tuning.
Incredible that a 100% stock car can make almost 700hp at the tire with just a little work to the AC system.
Yeah 😂
I saw a V6 Camry make 500 ish hp on a bolt on super charger. You can get alot out of those old Toyota V6's
Forced induction, it's a beautiful thing.
How's he tuning it? Stock ECU or aftermarket?
They put a turbo in it hows that stock? What work to the ac system are you talking about?
Ty needs more recognition for his efforts. Make the man a shirt!
I agree a Ty's Fab Shop shirt would be cool
Yes that's what I said in the other video of him fabricating for the new a/c
Tired of people demanding things from this channel but a welding shirt would be cool
Tackin’ with Ty is a good name
"Burnin' Wire & Roastin' Tires"
Not gonna lie I actually wouldn’t mind seeing a more in depth video of Sam’s processes of restoring paint to that level.
He kinda went over it in one of parkers videos. But he's just basically wet sanding the paint to 3,000 grit and hitting it with some compound and polish on a buffer. You can get good results if there is enough clear on the surface, but if you go through to the base coat you'll be in for a paint job. If a car is just dirty and kinda hazy looking it makes a huge difference. If the paint is faded in spots where the sun hits it, and it has clear coat flaking off there isn't much you can do. You can make it shiny in spots, but if the clear is flaking off anywhere its probably really thin on the entire car and you're going to make a bigger mess trying to buff it than just leaving it alone until you can get it painted.
Agrees video of him doing a car start to finish with explanation
Your over thinking it, buffing out paint is not a complicated thing its just time consuming.
@@jaydunbar7538 It's literally what he said he does on Parker's video. He went over it when he was polishing that car last week. If you want it to look nice especially on a black car you have to do it right or you will get swirl marks everywhere and it will look like crap.
@@jaydunbar7538 Ill give you that its not complicated, but it can have a steep learning curve for the uninitiated. I've seen many people destroy good paintjobs burning through the clear.... If you have ample clearcoat, you're good. But 95% of people dont know WTF they are doing and can make things far worse.... I'd say for most, stick to hand polishing, clay bars, etc. You can still get quite nice results and not screw anything up TOO terribly. Or find someone in the know, who is willing to teach you. (even if you have to pay them)
I love Sam hanging around the shop. It’s lonely getting old.
Lonely getting old? My grandpa & great grandpa said it was the best time of their lives being retired and doing whatever he wants' Getting older doesn't mean getting lonely unless you make it that way. Age is just a number, not a disease.
Luckily there are 4 pornbots on this comment, alone, ready to provide companionship! What a time to be alive!
@@FarmerFpv youre an fpv pilot too??
saweeet!!!
@@corystansbury 🤣
I love how tye is an absolute workhorse , busy building cages , fabbing stuff on other projects as soon as the marauder was complete
Exactly, they're having fun dynoing the car and meanwhile he's still in the back working on the blazer
Looks like a guy that never get angry too.
I mean he works his 9-5 he isn’t on holiday…..
That car is the exact definition of a sleeper. Unassuming, 4 doors and quiet but it has 700 horsepower baby. Hell yeah brother let the freedom fly
As long as it's faster than the tesla, let it fly!
@@Ethan-kr9bh Unfortunately it won’t be faster than the Tesla Plaid! I wish though.
It's a shiny marauder. Id be suspect of it not being stock in that condition. Sure they are rare but it's one of those cars only car guys qould notice, and it sticks out. Just like a Grand National, or an early 90's SHO. You see a gem like that in that kind of condition I would not think it was stock
Sam needs a shirt also
Makes me want to ls swap my crown vic and throw a sushi slicer on it lol
It's going to be so great to see Sam driving that on sick week. It is a shame that Ed never got to see neighbor run. I'm thinking Ed will be riding with him for good luck. Who is going to ride with Sam all week? Ty should be out there too
It would be nice to see all of the crew driving something!
Sam driving the Marauder on sick week is going to be amazing
Wait, is he? That is awesome!
HOPEFULLY...Sam doesn't leave his blinker on the whole time all whilst going 43 M.P.H.!!!
Out of all the cars in the fleet its perfect for him. Just the old man sleeper car taking cocky youngins to gapplebees
Pull up to the redlight, old guy in an old Maurader.. Greenlight and suddenly *angry noises and boostwhine*
sick weeks going to be insane with the group of people doing attending especially with all the first timers. hopefully it helps the other race week events grow as well.
it has felt like the "MONTH OF FREEDOM" for a while now. loving the content mcfarland team
Ever notice that James' smile increases dramatically once the conversation gets in the 1000 HP range.
James doesn't mess around.
Or when nitrous is mentioned....😉
Boy loves him some nitrous. Wouldn’t surprise me if he were release some straight into the AC compressor intake during a pull.
So does mine lol
I love it when Dr Tune Em All is in videos. He balances out the other characters so well. Great video and glad to hear Sam will be driving this on Sick Week!
He's the voice of reason haha
Go check his video out on doing the tune
Go check his video out on doing the tune
@@DrVink86 you too
What happened to KSR? Did I miss something?
Unless it has been changed the Marauder comes with a 3:55 axle stock. Plus it wouldn't hurt to pull the axles and see if they are failing where the axle bearing rides. They had a problem with them failing. TSB 03-5-5. When I replaced the gears with 4:10 I found both the axles on my Marauder were failed.
Bump
This!!! Big time! Especially if Sam will be in it.
Definitely need to beef the rear axle up, that's a lot of power to be pushing thru a stock rear
Wonder if the oil pressure gauge actually works in this one too.
Same issue on the Crown Vic's, my family has had several retired police auction vehicles that needed a rear dif rebuild.
I would love to have a marauder like this 🙌🏻 something different out in the car world atm. Still looks clean 15-20 years later
We need a "Ty makes em mean and sam keeps em clean" marauder shirt!
100% agreed
Hell yeah! That's perfect!!
Definitely
And George is super keen
Bump this post
The baddest thing is no lag. That thing will get up and go as soon as you step on it. Bad ass and well done.
That’s the definition of a sleeper right there!!
Evening from uk mr randy👍
Hey randy! Yes it truly is a sleeper lol. Those AC condensers are working!
@@Captain_DeSync ac is super hot today 😂
@@marksaunders2500 hey!
@@AutoAuctionRebuilds 😂
I've never seen a better sleeper all quiet for doors wow you guys nailed it. Awesome work to you all. God bless you guys and as always be safe 👍
We need a special video of how Sam gets such stunning results. Your fleet looks spectacular!
Watch Cleeters Bros channel, Teeth and Turbos. Sam goes into the detailing a little bit. If I remember correctly he created a line of detailing products which are still available today
Old school work ethic and integrity. Those were the days.
100% agree!
@@fauxque5057 Thanks for the suggestion!
Not even a minute in and I have to say whoever did that paint work did a PHENOMENAL job.
Cleetus: Turn it up! High gear! All the boost!
Tuner: dude im trying to keep the car alive
Wasn’t the motor built to handle more horsepower than turbo can make
@@Ridinglawnmower145 yeah but they ran outta fuel
@@Ridinglawnmower145 yup but they don’t have enough fuel lol. It could easily lean out and go boom
@@Ridinglawnmower145 doesn't really matter when you lean out the engine at 7500 rpm.
@@calebc6028 Lean is MEAN!!!!!
Sam's worth his weight in gold. That old bus is SHINEY!! ❤🙏😎
I suggest a big sheet of aluminum diamond plate where the dyno cars sit. It’ll save the floor in case of a fire, explosion or whatever.
Done ruined it in two spots already, unfortunately. I wonder if there is a warranty on that epoxy??
I doubt a warranty would cover putting fire on it.
@@androiduberalles lol tongue in cheek
You have a great team, please let us know more about each of them, IE their skill sets and interests. You have done a great job already, super production values, super cars, super humor, way to reach way down inside for all the quality that you can. Shine up that fish. Thanks for the great videos!!
I love how Sam became a regular on the channel, guy is a class act. 👍
YAWWWWWNNNN...Marauder content is great for helping me fall asleep almost works as good as jet boat content...although boosted boiz content takes the crown for best sleep inducing content I must say holy hell!
Dyno day is like Christmas day for ole Cleeter. He gets so excited and giddy lol singing and talking about more boost. Puts a smile on my face.
Shout out to Sam for that mirror finish!
Listening to your video through headphones 🎧, when that thing spooled up it’s sings. Now high octane
It definitely blows the cobwebs away.
You guy’s rock. Cheers from the Uk.
It's amazing how much power you gain when you turn the AC on. Normally they say to turn the AC off to go faster.
I made one complaint about "stock" Maurauder and now it's a "sleeper turbo" ! Thanks Garrett, much respect !
When you strap the front wheels you should make sure your pulling the wheels from the front. The driver side you had the wheel strapped to the bottom, when the front end lifts up during the pull it loosens the front straps. I’ve seen it rotate the front tire and loosen the front strap and kick the car off the dyno before.
+
Yeah, I was thinking this too. Good catch.
I have a boost activated cutout on my sleeper integra, and the looks you get from people are priceless ! Well worth the money!
Cant believe how Sam made that black paint mirror finish on the Maurader!..looks show car quality!
Considering he has his own shop and that's what he does it shouldn't be a surprise.
Always gonna be that guy in the comments😑🙄.... SAD AF!!!🤘🇺🇸💯
@@thisisdumb934 I dont care who you are, turning black into glass is difficult. If you know anything about paint, black shows every imperfection.
@@TylerSmith-gy8ys read his comment again. I think you replied to the wrong guy.
Of course most all of us normal human beings r jealous of being able to play with dream toys all the time.but you have an amazing team of people there!great bunch!thanks for the entertainment buddy!
One of my favorite builds right now, so much fun to watch! Love those cutouts brother
Such a talented team fabricating, tuning and detailing! 👍🍻
Can you guys please do a video showcasing what Sam is doing to the paint on all of the fleet? Like what products he is using and what tools. He is a god with making the cars look good.
If you watch cleetus' brother channel teeth and turbos he does a full length interview with Sam. In the interview Sam explains how he founded a car detailing supply company and explains the products.
Cleets brother teeth and turbos has actually been hanging out quite a bit and has showcased some of that on his channel
@@Mcsticky12 Awesome thanks! Didn't know he did a video.
He's wet sanding then rubbing compound then polish basically. More in depth than that but thats basically the stages
The main product you'll need is lots of elbow grease.
I love that y’all put an actual exhaust, a hood, and made the car look so nice and shiny 👌🏽 it’s literally perfect bro 💯
Sam has that rig friggin dialed in! Holy crap
Really wanna see a McFarland build specifically for Ty, let him take full creative control
Yeah I like the idea of Ty getting his build but cleetus can’t keep making builds for everyone of his employees at one point this needs to stop unless Sam gets a build because unfortunately as we all know his times running out
@@Ridinglawnmower145 so George got a build, who else..? I agree Sam should get one too but 1. He's piloting the marauder for sick week and 2. Ty is the one making all these builds happen in terms of fabricating together the amazing parts that Cleetus provides
@@georgedunkley6561 James has his own builds but Ruby is basically his neighbor was also a build for his neighbor
@@georgedunkley6561 back to my point tho cleetus can’t just keep handing out builds because they always end up in some tricked out 427 with motion parts
Ty has a truck or something that he’s working on from home, I believe. Sam has his own shop that’s pretty well set up. It was featured in a previous Cleet video. Those guys are fine where they’re at.
Damn I need a dude like Sam to teach me how to polish up my cars! He does such an amazing job 👏
Ty certainly knows exactly how to make a turbo kit. Doctor Tune-em all will make it nice and spicy Cletus. Good luck for Sick Week 👍💯🔥👏 Aussie Fan 🤟🆒🤣
The beautiful black 700hp 'street' Marauder on that NEW FLOOR looks AWESOME! Imagine the looks on the dude or dudette's face who attempts to take that beast on in a LIGHT to LIGHT street dash! They will mess their pants when they see it rocket away!!
I want to see McFarland Racing do the Cannonball Run with the Marauder, lol.
Facts!
Dude yes! They need to do that, or Gumball 3000 or even getting some cheap ass car like one of the racing Crown Vic's into the Gambler 500 would be bad ass!
THIS!!
Sam is driving it at Sick Week.
Doesn't have the brakes, fuel efficiency, or cooling to stay at 100+ for hours on end.
Sam driving that thing around on the street would be the ULTIMATE.........Ultimate Sleeper!!!👍🏼🤘🏽
Out of every build you guys have done, this is the one I would love to own the most. Great job, keep it going!
Sam is probably my favorite person on this channel!!! Such a cool dude!
That is one badass sleeper of a car. A true grocery getter for Mom until she stomps on the loud pedal at a set of lights.😳😮😁👍👍🇨🇦
How can that turbo sound not give you goosebumps!!
You don't need the jet dryer anymore. Just run the Marauder around the track and that wastegate will dry it up in a couple of passes
You should definitely make a psa to most of the kids that watch and explain how you can use ethanol because of certain parts you have and how it will basically eat the fuel system of a car not made for it. It gives you gains but will not do the same for most cars on the road. Stay safe out there and don’t mod your vehicle unless you are willing to put work in it.
Dr. Tuneemall had me dying “ yeah you have all of it, the gauge went 80,81,82,83, all of it. So your good” is by far the funniest shit I’ve ever heard. God I love this crew!
That rear end and axles are fearing for their life. Can't wait to see Sam behind the wheel.
Ty definitely deserves some more recognition and a seat in the drag and drive action.
Dang man!!!! That thing is sweet! Sam did a hellava job making her shine too!
You need a cool dyno plate like PFI has on the floor, it’ll help protect and look badass
I swear I’d be crazy without these videos and Cleetus in my life!! I’m in Portland Oregon so it’s been really rough… for years… and years.
Holy crap you are going to make people crap their pants in the passenger seat! Silent, chilled ride and then all hell breaks loose!
So awesome! I’ve wanted a marauder since they came out. Like a crown Vic, but with more 🦅. Man that thing is a dream come true! 🇺🇸
You don't need a BOV Cleet. As long as the turbo isn't surging or choo-chooing under throttle load, you're fine.
The sound is actually mind boggling good, Tye done exceptional. Gosh dang.
Love watching your videos cleeter always quality and you have a great group of guys supporting you. Keep up the great work!!
WTB kart races at the FF! Drag cars are sweet but would be fun to see some shop time shenanigans racing some little karts around the burnout pad or something!
Be sure to check the rear axle Bearings have seeing these in stock mode chew directly through the axle. But this sounds killer! Sam great paint work! Glass finish
Drive it drive it drive it!!!
Insane.
Hats off Ty. He’s the airflow guru.
Sam needs to give us a masterclass in getting our cars that shinny
Mad respect to Sam, that paint is amazing!!
We need to see a Marauder vs. Neighbor showdown.
Have a smokey and the bandit style chase
@@johnc.hammersticks Great idea!
Ford powered would win.
Amazing parts do nothing without the AMAZING workmanship you have got over there , one lucky man surrounded by talent and skills
Add a 3rd peddle to the dead peddle (like an old school high beam switch) and make it a manual override to the vacuum diaphragm so you can open it at will
That is genius
that right there is my favorite build from cleetus a complete clean sleeper super quiet and beautiful
It’s guys like Ty who make a great team a spectacular team 👍
That’s awesome if you really are letting Sam drive this all week!!
X2 for tacking with tie t-shirt 😎
Ty been doing an amazing just on the turbo installation but what about Sam? He’s killing it on making Ruby, Marauder and Rocky fresh and so clean. Shubuddy
I can see it now, Sam sitting at a light in the marauder, some young fool pulls up in a hellcat, and Sam gives him a little rev. Boyo in the hellcat floors it, but Sam gorilla stomps the loud pedal, the cutouts open up, and Sam is taking trust-fund Trevor to gapplebees for a waaah-burger and some french-cries.
Sam is the hero we need, that none of us deserve. It's gonna be AWESOME to have him piloting that unit for sick week.
I would love to see Sam run that car on sick week.
That would be so cool
Sounds like he will be !!
700rwhp through a tall rear gear and a 4L80 is damn impressive IMO! 👏
Hold up, wait a minute, did anyone else hear that? Is Sam going to be able to handle the power on sick week? HYPED!!!!!
Good afternoon, great work. Nice to see your crew having fun while working
you guys need to get yourselves a crown vic with the stock 5.0 coyote. they were a special edition :)
Twin a/c compressor Coyote... Yeah I remember those 😁
Would love to see a video from Sam on how he gets all the cars so nice. Nice little step by step.
Puts plate down for the waste gate but completely ignores the cutout just nukeing the floor 🤣🤣🤣
Thanks for carrying the torch for internal combustion guys. With so much electrification shit everywhere now it's so refreshing to hear a V8 boosted by two turbos making 700HP at the wheels.
Sam needs a tricked out golf cart with racks for his tools and supplies
Definitely
The shop aint that big that he needs a ride in there 😂
@@Simon-747 I think we are talking about a cart to use to drive over from Sam's shop/house which is a few houses down from the shop across the street from James
I need that turbo kit setup for my 96 Caprice!
That entire epoxy floor around the dyno is going to be BLACK BURNT
I truly believe Cleetus missed his calling to be a cheerleader. Lol Here we go bald eagles
Here we go 👏👏
Quiet and stupid fast is always good, saves you tickets and your hearing, love it.
You guys should put a cowboy hat on Ruby’s and Leroy’s intake.
That thing has zero lag. Sounds amazing for the quiet side.
Hell yeah brother!!
That new A/C compressor should really help!
This is probably my favourite car in the McFarland fleet. I need a Marauder in my life
I absolutely love the quiet exhaust until full send with the e-cut. Absolute sleeper
Sam is a miracle maker. I barely went to look at the car in case I somehow smudge it.
Gareth love what you have done with the car - Ty is genuinely an asset to the crew and always busy. PLEASE check the rear end,axles in that car for Sam's sake
He is such a lovely loyal guy and an addition to your great crew. A little bit of safety for Sam's sake is a great thing
I’ve always wanted this car, seeing yours I just want it even more. Badass ride man!!!
It's really funny to see George in the old Ruby videos, he looks 15 years younger lol love it all!!
You can add a MAC valve between the turbo and the loud valve, to be able to shut it off when you want it quiet all the time.