Haas ST-25 Cutting Demo. Rough, finish, groove, thread, and broach - Haas Automation, Inc.

Check out this extended cutting demo where we show all the operations involved on this work piece including OD roughing and finishing, OD and ID grooving, threading, and we even broach slots to finish it off.
Here is the link to the ST-25 Turning Center page on our website:
www.haascnc.com/machines/lath...
Check out the HaasTooling turning tools used in the video here:
www.haascnc.com/haas-tooling/...
Don’t miss any Haas videos. Click here: www.haascnc.com/about/Newlett...
Need more reasons why you should consider a Haas? Check this out: www.haascnc.com/whyhaas.html
If you enjoyed this video, please hit the like button and share it with a friend who’ll find it helpful . . . and thanks!
Follow Haas:
Facebook - / haasautomationinc
Instagram - / haas_automation
Twitter - / haas_automation
LinkedIn - / haas-automation
Code: SRN12QERERJCG2A2
Code: QLZIMNEHIRPQVFEZ
Code: U8THSGBROPJVW6KS

[@richardjones1022]

I'd love to see this machine do a demo with toolsteel like M4, M2 or D2, A2 and S7

[@dan3076]

lets make a video of how good our machines are and show and here all the chatter

[@stringbender68]

Some pretty serious chatter in those o'ring grooves

[@petermartinka9274]

amazing! love it!

[@devindecater]

I don’t think those O-ring glands would pass inspection with that chatter…

[@stringbender68]

exactly

[@parnuzutech]

Amazing 👍

[@PizzaChet]

@ 2:50 there's an extra Z+ move instead of X home first. Tailstock removal routine.

[@williamhuang5329]

Hanzhen harmonic drive gear , strain wave gear reducer, robot joint , over 30 years experience

[@bilgideryas1157]

I'm thinking of buying a second hand machine from the haas st 25 2014 model, two points caught my attention, 1 - x axis motor 1.3kw is it enough for this machine? 2- I called the team in mdi. When I say T0101 g0 x80, x80 comes, when I press the handle button, it says invalid command

[@evanorner]

im curious what would the code look like for this? May I see it? I am working on my CNC NIMS programming and its all hand programming no CAM softwares

[@cristianpereyra2905]

Se olvidaron el agua?

[@Reg278]

never seen anything like it😂

[@br1ckify]

sounds like a popcornmachine

[@VincentComet]

I can confirm the Haas ST30 machine I had the chatter was worse than this

[@user-ew2vc4qn3o]

А канавки с дроблением, а оно не допустимо.

[@rueuflecomte2539]

Ржавые заготовки в такой станок ставить это очень плохо. Совсем технику не жалко я смотрю

[@Fizzy-Bubblech]

Reuploaded Video with Filter over the sound. Still some wasted time with air cutting.

[@nathanpage5558]

The air cuts are the semi Finish / last pass on a g71 cycle. If anyone knows how to get rid of them. I’d love to hear it.

[@user-pf5cm4zd9c]

И что ты того показал что обычный програмник не умеет?

[@user-pf5cm4zd9c]

Ты программу на стойки сам писал?

[@joshuareynolds8324]

@@nathanpage5558 if you have to because of many multiple parts etc make the depth of cut slightly different so the last cut in the roughing cycle still takes a reasonable cut

[@user-np2hw7vg5x]

после видосика пластина на свалку =)

[@snake9100]

looks rough to me

[@JayVon_Ro]

chattery grooves