Inspiring video. I’m confident I can clean these carbs thanks to both your tutorials. Simple, straight forward and NOT BORING. great camera work as well.
FINALLY! The only person who properly shows how to remove and install this damn carburetor, and you loosened the cables instead of taking off the bracket, cause I stripped that bracket screw lol
I actually really appreciate finding this video! Someone I do service for has a shot carburetor Ninja 250 and I’ve been working on it for him(just started today, actually!). I needed to know how to take it out just right. Thanks, man!
Just pulled the carbs out of my 2007 Ninja 250 thanks to you! I am in California and we have some EVAP hoses that connect to carbs that you did not have.
Thanks. Very useful video. I didn't enjoy having to keep hitting 'mute' though when the loudly mixed alt-metal started blaring through my studio monitors and sub-woofer. LOL.
Good images, but you left an important step out. You have to remove the air box boots from the air OC and the carb Intakes. Otherwise it’s hell to get the carbs out of the engine intake boots.
Just seen the video of cleaning the carbs I just bought a 03 ninja ex250r and doesnt stay on with out the chole on and if you give it gas sounds like it's getting not enough gas tou saved me money because I'm going to clean the carbs first before trying to rebuild them thanks for your videos god bless
Any suggestions for getting those rubber boots back attached to the airbox and carb?... I soaked the boots in next to hot water to make them more workable but I'm having a hell of a time getting them to go onto the carburetor once the boots are already attached to the air box. Any suggestions would be greatly appreciated, thank you.
Nice video wish i would have known about the air box removal other then that i got my done somebody else in the comments said sure box but i muscled mine
Usually cleaning the carburetor is enough... Just follow my video you should be okay. If you have time and you can order on eBay the float bowl gaskets and the float needles that will be better... Thank you for watching my video and please subscribe... it will help me out 😊
if you are talking about the bottom of the fuel bowls they are drains...if you loosen up the screw next to them you could drain the carburetors ...or if they are flooding the fuel will start coming out from there...from factory there are hoses attach to these drains that just go to the bottom not connected to anything...just to drain the fuel down...NEVER plug these out because it will cause vacuum inside the carbs and cause issues...leave them alone or attach the hoses to them and route them down securing them with ZIP ties...up to you...most people don't have them on there... Thanks for watching and please subscribe to help me out
Inspiring video. I’m confident I can clean these carbs thanks to both your tutorials. Simple, straight forward and NOT BORING. great camera work as well.
Thank you Eli! That means a lot to me...hope you'll subscribe...it will help me out 😊
Thanks for this! Waaay easier than it looked at first glance. You made this so much easier.
FINALLY! The only person who properly shows how to remove and install this damn carburetor, and you loosened the cables instead of taking off the bracket, cause I stripped that bracket screw lol
I actually really appreciate finding this video! Someone I do service for has a shot carburetor Ninja 250 and I’ve been working on it for him(just started today, actually!). I needed to know how to take it out just right. Thanks, man!
Just pulled the carbs out of my 2007 Ninja 250 thanks to you! I am in California and we have some EVAP hoses that connect to carbs that you did not have.
Just about to work on my 2007, lol
Just got my first bike and this video saved my ass, thank ya bunches
Thanks. Very useful video. I didn't enjoy having to keep hitting 'mute' though when the loudly mixed alt-metal started blaring through my studio monitors and sub-woofer. LOL.
Best video and instructions I've ever seen. Thank you!
Wow Great Video!
So many videos I see are shaky cam without editing. Yours is professional and very informative. Thank you.
I am literally following your instructions step by step although a bolt was stripped and took me 3 hours to get it off
Same lol
Good images, but you left an important step out. You have to remove the air box boots from the air OC and the carb Intakes. Otherwise it’s hell to get the carbs out of the engine intake boots.
Just subscribed because you got my carb off in 14 minutes!
Just seen the video of cleaning the carbs I just bought a 03 ninja ex250r and doesnt stay on with out the chole on and if you give it gas sounds like it's getting not enough gas tou saved me money because I'm going to clean the carbs first before trying to rebuild them thanks for your videos god bless
Just got it done for my 500... thank you!!
Your videos are extremely helpful, Thank you very much.
Very informative and thorough
Awesome video!...this will def be the video I use as reference when I do my carbs this winter...thanks for posting.
I don;t know your name, but your work is sharp as a tack, and the videos are great. No Baloney Here !
Omg I got half the bike tore apart.
Sooooo great video.
Any suggestions for getting those rubber
boots back attached to the airbox and carb?... I soaked the boots in next to hot
water to make them more workable but I'm having a hell of a time getting them to go onto the carburetor once the boots are already attached to the air box. Any
suggestions would be greatly appreciated, thank you.
did the same thing but eventually got them on. over a year later my carb somehow is leaking and i'll have to tear it down again to see why.
Love your content man, you don't have nearly enough views
Thank you! Means a lot to get a good feedback
Wow you just make this so simple great vid
I love your videos dude!!!!!!!!! I've said that before...you actually know how to teach =)
Had to subscribe straight to it, imagine im out somewhere with 10% battery!
totally helpful, subscribed 👍🏼
Nice video wish i would have known about the air box removal other then that i got my done somebody else in the comments said sure box but i muscled mine
Is this the same procedure on the 250R in the Philippines
Does this apply to a ZZR 250?
My manifolds were pretty hard on the carb, I couldn’t rlly bend and pull like you did to get the carb out, any tips to be able to slide it out easier.
boil them in hot water. makes them more pliable. what'd you end up doing since its been a year?
this was super helpful
So if my bike been sitting up for a while will cleaning the carburetor turn it in or do I have to rebuild it?
Usually cleaning the carburetor is enough... Just follow my video you should be okay. If you have time and you can order on eBay the float bowl gaskets and the float needles that will be better... Thank you for watching my video and please subscribe... it will help me out 😊
Thanks bro for sharing
Is Ballistol suitable for cleaning a carburetor? Will the residue cause any problems?
No need to waste perfectly good Ballistol on carbs. Just use carb cleaner.
The gas tank needs to be empty, right? I should drain it first, through the petcock?
no, just turn to off and no need to drain the gas.
Very helpful thank you
What are the things on the bottom that look like hoses go to it?
if you are talking about the bottom of the fuel bowls they are drains...if you loosen up the screw next to them you could drain the carburetors ...or if they are flooding the fuel will start coming out from there...from factory there are hoses attach to these drains that just go to the bottom not connected to anything...just to drain the fuel down...NEVER plug these out because it will cause vacuum inside the carbs and cause issues...leave them alone or attach the hoses to them and route them down securing them with ZIP ties...up to you...most people don't have them on there... Thanks for watching and please subscribe to help me out
@@DoityourselfMotorcyclerepairs awesome. Thank you. I have quite a bit I need to do today on the bike, and I'm still learning about them.
Bro I love your video
Informative dude.
Thanks brother! It means a lot to get positive feedback. Please subscribe to help me out!
Thank you!!!
Excellent tks for shared
Can you make a video for 2011 ninja 250r plz lol
3:15😭