I am running an Akrapovic slip-on on my 2019 Monster 1200 25 Anniversario do you recommend getting an upmap also do you recommend ditching the stock header and getting the Akrapovic header as well? Thanks. 🤘😎🎸🏍
Termi slip ons! love them! Upmap not quite ready yet for 2023 SF V4 however, but I am in communications with them and so far great support from them over in Italy. should only be a matter of weeks!
@@buke45 I ended up with a full Akrapovic system and the Termi race upmap, she sounds sweet not quite as loud as the full Termi on my buddies Monster 1200 and it is a nice contrast from his bike.
The UpMap does do anything to your quickshifter. The O2 sensors are disabled in some of the maps, you need to check the details of the specific map you are choosing.
The Arrow on this link has the upmap as an option. The Termignoni listed also has them included : www.motomillion.com/collections/ducati-streetfighter-v4/exhausts
Hey Mani! I did the exact same thing as you. I also have the exact same titanium arrow exhaust and after the up map my bike starts to idle hunt, only during a cold start. But after it’s warmed up it’s okay. Do you know why it idle hunts?
Hello mate hope you are doing ok actually I new to superbikes just my first bike which 2017 s1000rr and I want to put full exhaust system on her wanna remove catalytic converter and I am thinking to install servo buddies as well just curious is it really necessary to install new map with full system or to add power commander and one more thing what about air filter should run with normal air or to put something specific thanks will wait for your reply
3:53 - The app tells you to Turn on the ignition. Check the RUN/STOP button is in the RUN position. - What improvement do you get with the standard exhaust?
Two questions, how many maps do you need if you remove the exhaust servo and install the exhaust? You show one for the servo elimination, is there a second specific for pipe and air filter combinations? If I was doing this same a shop, do I need an uploaded for every bike or can I use the same uploaded for different bikes?
With the upmap, can I still change engine power modes in the bike settings? Switch between smooth / dynamic throttle response and reduced / full power?
Thanks! Sounds like it might make sense to upload the upmap even for a stock bike, just to unlock the power in the first 4 gears on the 22 Euro 5 Streetfighter.
I installed the Termi yesterday and installed the upmap without the killer. But now it's too loud for me without the killer and I've put in two killers. Is this a problem for the engine? Software without killer but now inside?
Question, Once you have maps loaded on the device do you need an internet connection to load the map on the bike ? Or just the blue-tooth enabled ? I have 2 maps and might want to change at the track (no internet connection) Is this possible ? Thanks
@@Motomillion cool. Thank you. Curious as I’m looking at one with Akra slip-on and claim of upmap but screen only says “racing” so trying to determine what that means
Why does the dealer have the monopoly on the Monster 937 full Termi up map? Am I able to purchase the full exhaust and then get a t800 to flash the ECU. Confused how UpMap works with Ducati…
They do not make many maps for the crackles since mostly it is not a wanted option. It sounds really nice and sweet without it. It will pop when you shift though.
@@Motomillion Ok cool…my dealer actually ordered it thru you guys…well atleast I paid for it…was there yesterday (Saturday) and we was looking on your website…they added the map that was needed so the check engine light doesnt show…hopefully no future bike problems since the map voids the warranty cause I only got 600 miles and the service light came on while going home…so plan on getting 1st service with exhaust at the same time…with the map does the DWC settings etc still work the same?…
You know the riding difference between the Arrow Performance tune, MTorque and stock OEM Ducati tune?…can you describe them?…I don’t know what I should get for out of MTorque and Performance…
Hi! I'm considering to get it, but.. which is the difference between mtorque and performance maps? And also, what about the fuel autonomy, does it gets more fuel thirsty than it already is?
I don't think it gets better economy, but it does not get more thirsty either. M-Torque maps are not included for free, they just optimize the lower end torque a little more. Performance maps are specific to the exhaust applications. We have not really utilized the M-Torque maps, but we have had good results with the performance maps.
I Just purchased a 2023 Ducati Streetfighter V4S I changed the Exhaust to the Arrow Titanium System which removes the valve system. I Tried to use the UpMap t800+ with correct Euro5 Cable but the device wont even connect to the Bike, I’m struggling as the bike is not running correctly hence I brought the UpMap to install the Arrow Exhaust MAP. Any Help would be very much appreciated. Kind Regards
Hello. I followed all the instructions for a panigale v4 2023. On the app, the map appears applied, however, when I turn on, I’m missing the racing pro sign on the dash board. Help please
It will not have a dashboard message on the 2023 Panigale V4 models. Check the map details, it will tell you if there is a dashboard message that is supposed to appear, and if it does, what it is supposed to say.
Does anyone know how to fix the t800 reading the bike's battery as 0.0V and not being able to install any maps because it says "battery level low"? I keep my bike on a trickle charger it's definitely not low battery but the upmap unit doesn't recognize that
@@anislicina3065 well, I work with bikes and I haven't seen any SC yet on a Ducati, full of Arrow tho.. and some Akra. In my opinion Arrow is just way better than the other 2 brands, probably that's why he's running them. 1- nice looking; 2- good price; 3- sound is just💦
@@jacopogiannelli6634 In general all the bmw s1000rr he goes arrow with them too I've got a s1k and the arrow can't compare with sc or even akrapovic with noise in opinion anyways, and based my opinion by listening to them in person not kn youtube
I just bought this exhaust and installed Upmap for it. At cold start the idle goes up and down for 2 minutes then normalizes afterwards. Is this normal? Correct map without DB killers.
I have a 22 streetfighter v4 sp with euro 4 socket do i need to use a euro 4 map or euro 5 map? Because now im having the issue that says "impossible to proceed through the operation" when i try putting the euro 5 termi map. It is not mapping my bike
I bought a used ducati v4 a year ago with a t800 upmap unit on it and now I'm trying to revert to stock ecu mapping. In "founded devices", when I click on my unit, it says "error- device already binded". Does anyone know how to fix this?
@@Motomillion I bought it used over a year ago, so I have emailed the company but there must be a way to connect the t800 on my bike to my phone and control it...
@@Motomillion I got the ownership of the t800 unit transfered to my email so I can access the device but do you know how to fix the t800 reading the bike's battery as 0.0V and not being able to install any maps because it says "battery level low"? I keep my bike on a trickle charger it's definitely not low battery but the upmap unit doesn't recognize that
I've downloaded the map but it won't install. I've uninstalled the app and re did it and still won't install the map. Also waited 15min and nothin has happened
You can technically do that if you have the means to do it, this is much easier than pulling the ecu out and having the specialized equipment to bench flash it and put it back in.
@@Motomillion how do you flash back to OEM? I'm trying to get my bike ready for the brentuning stage 1 but can't find info on removing the t800 and installed upmap
What exhaust are you running on your bike?
Let us know! 👇
I am running an Akrapovic slip-on on my 2019 Monster 1200 25 Anniversario do you recommend getting an upmap also do you recommend ditching the stock header and getting the Akrapovic header as well? Thanks. 🤘😎🎸🏍
Termi slip ons! love them! Upmap not quite ready yet for 2023 SF V4 however, but I am in communications with them and so far great support from them over in Italy. should only be a matter of weeks!
@@buke45 I ended up with a full Akrapovic system and the Termi race upmap, she sounds sweet not quite as loud as the full Termi on my buddies Monster 1200 and it is a nice contrast from his bike.
You have such a clear and precise way of explaining what you are doing - thanks
Thank you!
This was an excellent tutorial 💯
Thank you!
Wow thats real easy. Keep these how-to vids coming mani👍
Will do!
Agreed huge selling point
3:54 the app is telling you to turn the ignition on. A very straightforward instruction. Very superb and sexy bike. Still a great video. 👍🏼
Quality product, support and team!!
Today you helped me installed my arrow exhaust sprint filter and upmap tune. Thank you
Great 👍 Glad it was helpful!
great video.... so if you are changing the map.. do you still need servo eliminator or not? thank you
Once you update the map with UpMap, you no longer need a servo eliminator!
Thank you . I’ll order it on your website as always do ) best place
Fantastic videos. Keep it up. I will definitely be ordering from your company because your content is so good
Thank you! Trying our best to bring quality content!
Great vid! I'm running the Full Ti Akra system with the Ducati tune on my SFV4S
You can also use the UpMap's revised map for the Akrapovic on your SF V4S for more gains.
Just ordered mine ❤
Excellent review
Glad you liked it!
Awesome bike, congrats.
Manny, does this upmap mess up your quickshifter or anything else that is needed such as your O2 sensors ?
The UpMap does do anything to your quickshifter. The O2 sensors are disabled in some of the maps, you need to check the details of the specific map you are choosing.
thanks buddy...thinking about buying your upmap for the 2023 ducati diavel v4 that has the uscite exhaust@@Motomillion
I did mine today and that went well 👌
Did the upmap unit come with the pipe? If not where do you get the correct unit for the exhaust you install?
The Arrow on this link has the upmap as an option. The Termignoni listed also has them included : www.motomillion.com/collections/ducati-streetfighter-v4/exhausts
@@Motomillionawesome thank you
Great video, very helpful!
Glad it was helpful!
Hi,
Do you absolutely need to add also new airfilter when installing new exhaust? For example Termi slip on
It is not necessary, but the P08 street filter is advised.
Hey Mani! I did the exact same thing as you. I also have the exact same titanium arrow exhaust and after the up map my bike starts to idle hunt, only during a cold start. But after it’s warmed up it’s okay. Do you know why it idle hunts?
Unplug the O2 sensors.
@@Motomillion thank you so much man!
Hello mate hope you are doing ok actually I new to superbikes just my first bike which 2017 s1000rr and I want to put full exhaust system on her wanna remove catalytic converter and I am thinking to install servo buddies as well just curious is it really necessary to install new map with full system or to add power commander and one more thing what about air filter should run with normal air or to put something specific thanks will wait for your reply
Do you have any input on using UpMap versus BrenTune with that arrow exhaust?
3:53 - The app tells you to Turn on the ignition. Check the RUN/STOP button is in the RUN position. - What improvement do you get with the standard exhaust?
We’ve never dyno tested with stock exhaust, but they do show what expected improvements in their relevant map section.
Great tutorial.
Glad you liked it!
Where's the video riding it!?
Awesome video Mani! Did you remove db killer?
Thank you and yes the dB killer was removed, check out the install video, we show it all on there!.
Thank you Manny good job
My pleasure!
Two questions, how many maps do you need if you remove the exhaust servo and install the exhaust? You show one for the servo elimination, is there a second specific for pipe and air filter combinations?
If I was doing this same a shop, do I need an uploaded for every bike or can I use the same uploaded for different bikes?
Could you tell me What is the difference between racing Evo and the racing PRO Map! Pls
The racing evo is the factory upmap, the racing pro is the aftermarket maps.
@@Motomillion thanks 😊 for the info 👍🏻👍🏻👍🏻
@@Motomillion and do you know which one is better !?
You should do more of these mate
Thanks! We will be bringing more videos!
With the upmap, can I still change engine power modes in the bike settings? Switch between smooth / dynamic throttle response and reduced / full power?
Yes you can.
Thanks! Sounds like it might make sense to upload the upmap even for a stock bike, just to unlock the power in the first 4 gears on the 22 Euro 5 Streetfighter.
I installed the Termi yesterday and installed the upmap without the killer. But now it's too loud for me without the killer and I've put in two killers. Is this a problem for the engine? Software without killer but now inside?
Nice tutorial! Do you still need a dyno run after this? Or is it fine?
Check out our UpMap video. It runs great with the UpMap.
@@Motomillion That's perfect! Thanks!
Question, Once you have maps loaded on the device do you need an internet connection to load the map on the bike ? Or just the blue-tooth enabled ? I have 2 maps and might want to change at the track (no internet connection) Is this possible ? Thanks
Good question, I believe you would need active internet connection.
I have a 2022 Ducati Streetfighter V4S, but I could not find the Ducati diagnostic under the seat. Do you know where I can find it?
It is usually under the rider seat, towards the left back side.
Nice. But there is no support for Multistrada V4S?
What do you plug in to the empty plug where the valve controls use to go?
Just a cap.
Thanks for the video
No problem! We hope that it helps!
Fantastic video. Question: did you not get “racing EVO” screen because it’s only a slip-on?
The reason is the tune. UpMap will say Racing EVO, the Akra factory map will say Racing PRO.
@@Motomillion cool. Thank you. Curious as I’m looking at one with Akra slip-on and claim of upmap but screen only says “racing” so trying to determine what that means
Thank you ☺️
You’re welcome 😊
you leave di electrical power to lamba sensors, or remove it ?
Depends on the map you select, it will be in the details of the map.
@@Motomillion in the details "mtorque" tells to remove it
Why does the dealer have the monopoly on the Monster 937 full Termi up map? Am I able to purchase the full exhaust and then get a t800 to flash the ECU. Confused how UpMap works with Ducati…
Bonjour et t’il risquer de rouler sens là up map avec le demi ligne arrow
Arrow has an upmap in the maps.
Any map for more crackles and pops?…thats ALL I want the exhaust for…plan on getting Arrow this month…
They do not make many maps for the crackles since mostly it is not a wanted option. It sounds really nice and sweet without it. It will pop when you shift though.
@@Motomillion Ok cool…my dealer actually ordered it thru you guys…well atleast I paid for it…was there yesterday (Saturday) and we was looking on your website…they added the map that was needed so the check engine light doesnt show…hopefully no future bike problems since the map voids the warranty cause I only got 600 miles and the service light came on while going home…so plan on getting 1st service with exhaust at the same time…with the map does the DWC settings etc still work the same?…
You know the riding difference between the Arrow Performance tune, MTorque and stock OEM Ducati tune?…can you describe them?…I don’t know what I should get for out of MTorque and Performance…
Does this exhaust job void factory warranty?
I can’t find the Upmap tune for the akrapovic. Anyone can share a link ? Thanks
What map would upload to it if exhaust slip on is NOT on the list ? 👀
Is the T800 a good up map for a arrow slip on exhaust on a v2 panigale.
Yes it is, we will soon have a dyno comparison of before and ever for the Panigale V2
@@Motomillion excellent, look forward to that.
Where do I get the upmap device?
Nice Video! Would this setup work on the 2023 Streetfighter V4?
Yes it will
@@Motomillion Thanks for the reply!
Hi! I'm considering to get it, but.. which is the difference between mtorque and performance maps? And also, what about the fuel autonomy, does it gets more fuel thirsty than it already is?
I don't think it gets better economy, but it does not get more thirsty either. M-Torque maps are not included for free, they just optimize the lower end torque a little more. Performance maps are specific to the exhaust applications. We have not really utilized the M-Torque maps, but we have had good results with the performance maps.
@@Motomillion Excellent! I will order through web page, thanks!
It looks like the dashboard on the 2023 model changed. Is there a way to see in the 2023 bike if the map was installed successfully?
Correct, the new models don’t get dash messages anymore.
Hey manny does up map have tune for stock set up, factory exhaust?
I would love you to customize by Ducati.
When getting a slip on can you just use a servo eliminator? I'm not worried about hp gains.
I Just purchased a 2023 Ducati Streetfighter V4S I changed the Exhaust to the Arrow Titanium System which removes the valve system. I Tried to use the UpMap t800+ with correct Euro5 Cable but the device wont even connect to the Bike, I’m struggling as the bike is not running correctly hence I brought the UpMap to install the Arrow Exhaust MAP. Any Help would be very much appreciated. Kind Regards
I have the same problem pretty much, did you end up figuring it out?
Same problem. I cannot get the app to find the device, and Bluetooth is on.
Hi I ended up going with the Open Flash Device more expensive but it works perfectly & aftercare is brilliant
can the upmap and app, reset the service lights as well?
No it can not.
Hello. I followed all the instructions for a panigale v4 2023. On the app, the map appears applied, however, when I turn on, I’m missing the racing pro sign on the dash board. Help please
It will not have a dashboard message on the 2023 Panigale V4 models. Check the map details, it will tell you if there is a dashboard message that is supposed to appear, and if it does, what it is supposed to say.
@@Motomillion awesome. I did purchase this kit from you so thank you so much for quick reply.
Can we take the backup of the stock Map?
It does take a backup of it.
It does take a backup of it.
@@Motomillion can we re flash the ecu to the stock map if we plan to put the stock exhaust back on the bike?
Would you recommend the sfv4 upmap over the stage 2 bren tune?
Great video!!! After the upmap, are you voiding the motorcycle warranty?
Who cares!!.. just run your bike stock please..
What happens when you ride in other modes?
Why did it go from mph to km??.. also, how can I change it back?
It may, you can change it back in the menu settings on the dash.
Done, thank you!
Anyone know the difference between the dash saying Racing Pro and Racing Evo? mine says Racing Evo.
Hi Mani do I need the UpMap if only installing a slip on muffler?
You need it because you will get a check engine light and also the mapping has to be updated to accommodate for the new slip on.
Any information on features of the map? Do you retain, street, sport and race mods? Lunch control, all the rider aids...
Yes, it keeps all of that functionality.
What’s your opinion on open flash tablets?
can v2 get more hp with this upmap tune?
Yes of course.
Does anyone know how to fix the t800 reading the bike's battery as 0.0V and not being able to install any maps because it says "battery level low"? I keep my bike on a trickle charger it's definitely not low battery but the upmap unit doesn't recognize that
Manny what watch are you wearing? I like it 👍🏼 I like the akrapovic and sc project 💥
Those are all nice choices too, but the Arrow is probably the better sounding of the bunch.
The watch is a G Shock MT-G (:
I think he got a nice deal with arrow thats why he uses them more
@@anislicina3065 well, I work with bikes and I haven't seen any SC yet on a Ducati, full of Arrow tho.. and some Akra. In my opinion Arrow is just way better than the other 2 brands, probably that's why he's running them. 1- nice looking; 2- good price; 3- sound is just💦
@@jacopogiannelli6634 In general all the bmw s1000rr he goes arrow with them too I've got a s1k and the arrow can't compare with sc or even akrapovic with noise in opinion anyways, and based my opinion by listening to them in person not kn youtube
Everyone has their own taste, but manny definitely uses them and advertises arrow more than any other brand, for obvious reasons
I just bought this exhaust and installed Upmap for it. At cold start the idle goes up and down for 2 minutes then normalizes afterwards. Is this normal? Correct map without DB killers.
When it is cold, it is normal for it to have a little bit of surge.
Great video 👍🏻
Thank you!
I have a 22 streetfighter v4 sp with euro 4 socket do i need to use a euro 4 map or euro 5 map? Because now im having the issue that says "impossible to proceed through the operation" when i try putting the euro 5 termi map. It is not mapping my bike
I am pretty sure you'll want to stick with the Euro 4 map
How do I use the t800 to uninstall the map and go back to factory in preparation for Bren Tuning stage 1 installation?
Go in the maps section and it will allow you to revert back to original.
@@Motomillion when I try to connect the app to my device under the devices menu, my unit shows up and it says error device already binded
I bought a used ducati v4 a year ago with a t800 upmap unit on it and now I'm trying to revert to stock ecu mapping. In "founded devices", when I click on my unit, it says "error- device already binded". Does anyone know how to fix this?
You need the upmap log in for the original owner. You can not make a new log in and use an already paired device, even if it is on the same bike.
@@Motomillion I bought it used over a year ago, so I have emailed the company but there must be a way to connect the t800 on my bike to my phone and control it...
@@Motomillion I got the ownership of the t800 unit transfered to my email so I can access the device but do you know how to fix the t800 reading the bike's battery as 0.0V and not being able to install any maps because it says "battery level low"? I keep my bike on a trickle charger it's definitely not low battery but the upmap unit doesn't recognize that
I've downloaded the map but it won't install. I've uninstalled the app and re did it and still won't install the map. Also waited 15min and nothin has happened
What error are you getting? Sounds very odd. Is the bike on a battery charger and is the kill switch in the Run position?
Bluetooth is sketchy - (low power & prone to interference). Always keep your phone still and next to the transceiver. ✌🏻
Good tip.
I have a streetfighter V4S but that map doesnt have it? can i still use the v4 version or what to do?
and its 2020
Yes, the engine maps are the same for S and Non-S models.
@@Motomillion amazing! Thank you for your fast reply man!
⭐L I K E S ⭐
I bought the seat and it is just a pain in the a** to put it on. Actually I think I might even damaged the side of the seat (the plastic parts)
So since I already purchased the map, noway I can refund it I'm assuming?
Try to reach out to UpMap support, they may be able to do something.
Why can’t you flash these bikes like any other bike? Take the ecu out, plug it in, flash it and be done.
You can technically do that if you have the means to do it, this is much easier than pulling the ecu out and having the specialized equipment to bench flash it and put it back in.
deyymm many nice
I think ducati Unlocked dash?
So they sell 2 maps, one for db killers and one without db killers? C’mon Termi…
Yes, the back pressure is different, you need to chose the correct mapping.
First map is free.
𝓹𝓻𝓸𝓶𝓸𝓼𝓶 😘
200 bucks for flashing back the OEM software, nope thanks xD
There is no cost to flash back to OEM, not sure where you saw this. The OEM software is saved on the app, and can go back at no cost.
@@Motomillion it literally says OEM exhaust map in the shop first item 159€
@@Motomillion how do you flash back to OEM? I'm trying to get my bike ready for the brentuning stage 1 but can't find info on removing the t800 and installed upmap
Can you add more than one map running at the same time