Installing The Overhead Lighting in Sam's Study
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- This video is about installing the overhead lighting in Sam's Study. It should be a simple task. However, it was not easy simple because I had to construct the tiny lights and wire them into the light fixtures. This is why I like 1/12 scale. So watch me struggle to complete this project.
Very nice. Tiny wires make me nervous, but it adds a lot to the little room.
I procrastinate on the lighting as well! Everything looks great❤️ Thanks for sharing
Thanks
Thank you and I completely agree this task is tedious and difficult! I so far have the separate lights done. I'm not making them into a lamp but am instead hanging the lights through my miniature Japanese lantern. I still haven't figured out the part where you put the lights together and connect to the long wires, but watching your video several times definitely helped!
Thank you from Australia - I’m currently struggling with wrapping the wires around the LED lights - I’ll try tweezers. Sam’s Study I loved except for the lights 😂.
Thank you for this, I am halfway through installing the lights (had to strip back at one stage to get the lights working again and use tape instead of the shrink plastic!). I too can only now get 3 lights working (but 3 out of 4 ain’t bad!). I’m just about to attach it to the ceiling so wish me luck!
I’ve lost or can’t find the 2 bronze strips 😬
Thanks for the video. I'm about 90% done the kit, except I've been struggling with the lighting waaay more than you did! I'm going to have to buy more of the wire and heat-shrink tubes, as I've had to redo them so many times. Do you know what gauge both the wires and the heat-shrink tubes are approximately? I couldn't find the information on line.
🏍️ I guess if misery loves company i loved this video. Thought i would learn from a master but you struggled exactly as i did.
Mine failed AFTER testing and gluing the 3 lights. The wires are brittle and break during twisting. The tubing is too small, so i replaced both. I did consider electrical tape.
I think it's the hardest of all the lamps by Rolife.💡
Thanks 👍
Dear Sam, could you tell me where I can buy this light fitting? Is it in kit form? I live in Melbourne, Australia and I would love to buy one of these lights, if the company that makes it delivers to Australia. Thank you for this great video tutorial. Cheers from Amanda Jones
No, sorry
Thank you for this video. Do you know where i can find extra write and heat shrink tubes this size?
A company that makes them is Kable Kontrol. You can find them on Amazon. I found them on line at Home Depot . I tried one of those plastic coffee stirrer and it seemed to work. I only had a red one ,but it secured the wires. Check on electronic sites.
@onepetitestreet1994 thank you so much! I'll look into that.
Question - could larger gauge wire be used to make it easier? Or any tips on making it easier would be appreciated 😊