Yesterday I ran over a piece of wood on my Suzuki GZ 250 and it immediately died; it started right back up in neutral but died when I put it in gear. I knew it was the kickstand kill switch. I'm no mechanic so I got on You Tube looking for someone that had the expertise to help me. I saw numerous videos on the problem all saying to trace the switch wire to it's connection, etc. That was impossible on my bike; the wire was untraceable. Your video solved my problem with the easiest solution!! Thank you so much for posting it and saving my day!! Mark Barry
Glad I could help! I was in a similar situation myself before and had to dig into the wiring diagram to figure out how it worked. Only after doing about half dozen did I figure out they were all similiar/the same.
Thank you for this video it fixed the problem on my 2012 Yamaha v star 1300. The bike would start just fine but when I let the clutch out the back tire would spin and the bike would cut off.Thank you again I love your videos
Do it work on a fantic 2023 my friend crashed it and the foot rest destroyed it and it wont go in gear, but do i need to weld can i just use some ducktape or something?
Thanks BUT YOU SHUDA STARTED BIKE!!??? My wire is begind engine (SO YOUR SOLUTION SHUD WORK!) Gonna try to remove plastic cover 3mm (need 4” extensions) rachet and connect green plug! If fails gonna SPLICE N SOLDER! Thanks
![[TH] 2024 PMSL SEA W1D5 | Fall | เก็บแต้มของจริง คือวันนี้](http://i.ytimg.com/vi/EciIAlCXg5k/mqdefault.jpg)
![[TH] 2024 PMSL SEA W2D1 | Fall | ต่อเนื่อง ในสัปดาห์สอง](http://i.ytimg.com/vi/ElcO9uC_Dbk/mqdefault.jpg)
Yesterday I ran over a piece of wood on my Suzuki GZ 250 and it immediately died; it started right back up in neutral but died when I put it in gear. I knew it was the kickstand kill switch. I'm no mechanic so I got on You Tube looking for someone that had the expertise to help me. I saw numerous videos on the problem all saying to trace the switch wire to it's connection, etc. That was impossible on my bike; the wire was untraceable. Your video solved my problem with the easiest solution!! Thank you so much for posting it and saving my day!! Mark Barry
Glad I could help! I was in a similar situation myself before and had to dig into the wiring diagram to figure out how it worked. Only after doing about half dozen did I figure out they were all similiar/the same.
Just did this on my cbr f2 . I let the middle one in and wired the other 2 together ! Works perfect bro !! Even the kickstand light it s working !
Thank you for this video it fixed the problem on my 2012 Yamaha v star 1300. The bike would start just fine but when I let the clutch out the back tire would spin and the bike would cut off.Thank you again I love your videos
I'm glad I could help out and it all worked out well in the end!
This work on the 07 750 gsxr?
Yes it should work perfect on a gsxr750
Do it work on a fantic 2023 my friend crashed it and the foot rest destroyed it and it wont go in gear, but do i need to weld can i just use some ducktape or something?
Yes this will work on your bike
Motorcycle legend
Takes one to know one
Would this work on nc750x dct
Yes sir
I have the same bike , 1998 Suzuki bandit 600 and the same issue just happened
Would this work on a 1998 Yamaha v star?
Yes it will!
Sir ,how about Kawasaki er6f 2007?
Yes it should work no problem just follow the instructions in the video, good luck!
I did this and my battery keeps dying
Do this work for a 2006 GSXR 1000
Yes
Thanks
BUT YOU SHUDA STARTED BIKE!!???
My wire is begind engine (SO YOUR SOLUTION SHUD WORK!)
Gonna try to remove plastic cover 3mm (need 4” extensions) rachet and connect green plug!
If fails gonna SPLICE N SOLDER!
Thanks
Suzuki SV650
The bike in the video is a Suzuki Bandit 1200 but this method would apply for a SV650 as well!