I have been so intimidated the last few days, and even procrastinated getting my project started. Thank you so much for your easy to follow tutorial! Today I made my first design, template, and rhinestone tee shirt :) #fanforlife
TIP: lay the "shiny" backing board in a large thin plastic tub before you pour your crystals over the template. That way, the crystals don't go flying all over the place and getting lost when you brush them, AND you can push the excess away from your template when picking up the transfer sheet, so you don't get static attracting loose crystals as witnessed at 9:43. It also makes it easy to collect them afterwards to put them back into the container. (Get a tub with a lid and you can also use it to store your kit and crystals! The lid itself might even be better to use as it will be thin enough to easily maneuver the brush and other tools over the lip.)
Thanks so much.. I have had my scan n cut for 4 years and have been scared to use it. I'm getting it out with the rhinestone kit tomorrow and blinging up some dog wear :)
Thank you, once again, Julie for all your ideas and techniques with the ScanNCut. I am fascinated with sliceform cards and would love to be able to make some. I know there are PDF patterns on the Internet that are shared and free. Could you please do a video of how you would take one of these and using the ScanNCut, transform it into a popup card? Thanks so much, David
After choosing a font to make my rhinestone tshirt, it looks as though it is double rhinestones around the lettering. How do I make it into a single line of rhinestones?
So thankful for you! I am new to scan and cut and trying to watch ALL your videos. Is there a second part to this video? Can you show how you did your name? That font doesn’t match the font provided with rhinestone kit. Thank you again for all your videos!
Julie used her own handwriting for her apron. Here is a link for more information: www.brother-usa.com/blogs/brother-crafts/get-some-glimmer-with-the-rhinestone-kit
Thank you so much for this information X I looked everywhere but couldn't find any information or videos on this so you really have helped lots. Could it be possible if you could do a video on this, i would really appreciate it if you could 😀 Thanks again, have a lovely crafry day
I am having difficulty with myDX 225. The first test cut went completely through the backing. I have it set on the half cut setting. Please advise on proper recommended settings. Thanks!
Hi Julie, I have a ScanNCut CM350 model. My question is I want to start to make templates to rhinestone t-shirts, etc. Which is the product I buy, I confused. Is the Scan N Cut Rhinestone Starter Kit or the Scan N Cut Starter Kit CARSKIT1. Please advise.
If you would like to get started with making rhinestone templates and designs, the Brother ScanNCut CARSKIT1 Rhinestone Starter Kit would be recommended. You can see additional details below: www.brother-usa.com/products/carskit1
Just downloaded canvas and added the rhinestone option but the wizard isn't showing up like yours is. What am I doing wrong? Shall I call Brother support?
i got my cm350 I love it so I went get the rhinestone kit I was so happy to start and I open the box but did not seet the card to activare my kit and thur it awaythe box :( I think I thru it in the box know can't use it without the card so frusteded! plz help!!!!
When I open my Canvas it does not show the wizard it shows rhinestone is activated but I get no wizard. I can however click on premium and see the wizard there but clicking it does nothing. HELP PLEASE
I have the rhinestone software but I can only use it in the canvaswork space when I type in the website in the browser but the one (canvas) I have saved on my desktop I can’t access the rhinestone software can you help
Love this video, I am learning so much tonight. Need to go to bed and stop watching. So much fun.
Thank You Julie you make it so easy to learn from you
I can't wait to get my machine and try this. My daughter loves to "bling" things up.
I have been so intimidated the last few days, and even procrastinated getting my project started. Thank you so much for your easy to follow tutorial! Today I made my first design, template, and rhinestone tee shirt :) #fanforlife
Love your videos! So helpful! Thank you!
your videos have been so helpful to me!! very informative and easy to understand! thank you! i do not do well with instruction manuals.
I love this, thanks bunches🥰
TIP: lay the "shiny" backing board in a large thin plastic tub before you pour your crystals over the template.
That way, the crystals don't go flying all over the place and getting lost when you brush them, AND you can push the excess away from your template when picking up the transfer sheet, so you don't get static attracting loose crystals as witnessed at 9:43.
It also makes it easy to collect them afterwards to put them back into the container.
(Get a tub with a lid and you can also use it to store your kit and crystals! The lid itself might even be better to use as it will be thin enough to easily maneuver the brush and other tools over the lip.)
Thanks so much.. I have had my scan n cut for 4 years and have been scared to use it. I'm getting it out with the rhinestone kit tomorrow and blinging up some dog wear :)
Great video! I will be getting one. I want to be the "master of my own universe" lol
Hi Jenny Is it possible to do the tutorial showing how you did your name on the apron. Thank you
Great video, thanks
Thank you, once again, Julie for all your ideas and techniques with the ScanNCut. I am fascinated with sliceform cards and would love to be able to make some. I know there are PDF patterns on the Internet that are shared and free. Could you please do a video of how you would take one of these and using the ScanNCut, transform it into a popup card?
Thanks so much,
David
I'll have to come back and watch this again, cause my scan n cut is not set up yet. So I'll save you to other sites.
That is awesome!
After choosing a font to make my rhinestone tshirt, it looks as though it is double rhinestones around the lettering. How do I make it into a single line of rhinestones?
Where do you buy the rinestone kits as I have looked and don't come with the transfer tape and the brush
So thankful for you! I am new to scan and cut and trying to watch ALL your videos. Is there a second part to this video? Can you show how you did your name? That font doesn’t match the font provided with rhinestone kit. Thank you again for all your videos!
Julie used her own handwriting for her apron. Here is a link for more information:
www.brother-usa.com/blogs/brother-crafts/get-some-glimmer-with-the-rhinestone-kit
Can you use images from adobe illustrator or google
Hi Julie, please could you do your apon using different fronts as they will be different size rhinestones thankyou 😊
My blade does not cut through the fabric😩 any ideas on what I can do? What should I set the pressure at?
Julie, can I use my heatpress instead of the iron?
MsBaje69 have you tried it with the heat press?
M Charmayne yes I did and I still have shirts with them still intact.
how do you find out what start up kits will work on the SDX
May I ask which font you used on the apron?
Hi Julie where can i order différent spécial effect like disney and other i try to find this on brother but i dont find.
What blade settings did you use please?
Hi thanks for your video
......can I ask a question, can the rhinestone kit be used on wool?
Thank you so much for this information X I looked everywhere but couldn't find any information or videos on this so you really have helped lots. Could it be possible if you could do a video on this, i would really appreciate it if you could 😀
Thanks again, have a lovely crafry day
I am having difficulty with myDX 225. The first test cut went completely through the backing. I have it set on the half cut setting. Please advise on proper recommended settings. Thanks!
did you get a answer they are currently closed and I am having the same issue
Hi Julie, Can the Rhinestone Kit be used with the DX125?
Hi Julie, I have a ScanNCut CM350 model. My question is I want to start to make templates to rhinestone t-shirts, etc. Which is the product I buy, I confused. Is the Scan N Cut Rhinestone Starter Kit or the Scan N Cut Starter Kit CARSKIT1. Please advise.
If you would like to get started with making rhinestone templates and designs, the Brother ScanNCut CARSKIT1 Rhinestone Starter Kit would be recommended. You can see additional details below:
www.brother-usa.com/products/carskit1
Just downloaded canvas and added the rhinestone option but the wizard isn't showing up like yours is. What am I doing wrong? Shall I call Brother support?
Where do I purchase this?
All this stuff is really labor intensive. Isn't there another way?
What do you set your blade to?
Hi, I love this tutorial. Question, how do you convert SVG file format to an PDF format?
Thanks
Wow. Yes you can
Awesome
Can this kit be used with an iPad or it has to be a pc ?
Are brother bringing out a new scan & cut
Great idea. I want some templates made. If you have this machine.....in the ATL.....post here commission work for you...
i got my cm350 I love it so I went get the rhinestone kit I was so happy to start and I open the box but did not seet the card to activare my kit and thur it awaythe box :( I think I thru it in the box know can't use it without the card so frusteded! plz help!!!!
Did you look through your packed materials? Mine was in with the sheets not loose in the box.
Will this work on paper, too? I'm thinking for card making and pocket scrapbooking.
Thank you!
When I open my Canvas it does not show the wizard it shows rhinestone is activated but I get no wizard. I can however click on premium and see the wizard there but clicking it does nothing. HELP PLEASE
CAN YOU DO THIS WITHOUT THE KIT I ONLY HAVE THE FREE SOFTWEAR
What is fcm format? I have a design n cut
I have the rhinestone software but I can only use it in the canvaswork space when I type in the website in the browser but the one (canvas) I have saved on my desktop I can’t access the rhinestone software can you help
Can you use heat press to heat them on item
in spanish please....