Sorry I haven’t commented in a while my friend I have not forgot about you you do good camera work man you sure are a real good mechanic I hate this time of year be safe my friend
I'm still love you gordon it's been long enough to come back and say it. that's a good video specifically the lighting and camera angles details. thank you sir.
I done it for 57 years and I’m now retired but still have a set of each in toolbox Plus both popular series Even compressor gaskets Even have my DD box and chips for trouble shooting
Gordon not sure if you're aware facebook has a detroit owners group where you're expertise could help a lot of detroit owner ops assuming you had time for that....Happy holidays to you sir..looking forward to more uploads take care!
I don't think I know which one that is. There's a hundred good lights these days. I will be doing a review video on a new wall light that was sent to me asking me to do a video on it.
I have a Cummins N14 mine went out and I could not tell any difference in the way the engine was running. Only way I knew was the check engine light came on.
THANK YOU - Excellent video! What other 60 Series sensors have you needed to replace over the years? Ever had to replace a VPOD on a 14L 60 series? Wondering what all I should replace proactively. THANK YOU AGAIN
Have you read or seen the FMCSA is going to be changing the pre emissions 2000’s and older over to the EDL ? They have it on the website to read up on but how is it possible to put it on the older ECM’s and program it to the truck ? Let me know what you think about how it can be hooked up so later on I will know what I need to do Please 💖💖💖 Thanks
You can buy the plug with 6 inches of electric wire from DD and suggest you get one just in case These old girls will be running when we’re both dead and gone
I don't know, maybe need to clean wire connection or repair wire since it's the only sensor by the compressor, the "TRS" is under the compressor but the truck won't run if that has a problem.
Why are you even complaining in G MAN... This man has gone out of his way for years now helping So many, In so many ways..... There are a lot more things in life to complain about other than a guy That has taken time to show people How to do things. I hope you at least watch all of Gordon's videos....
Great work an teaching. I like watching your video. I learn a lot by your patience an showing good video. 👍
Thanks for watching Carlos.
Your channel is better, and more helpful than the community college I paid $4K for. Thank you for posting practical lessons.
Props to you for keeping that old rig running Gordon. Much easier to maintain and work on than the new trucks on the road.
Sorry I haven’t commented in a while my friend I have not forgot about you you do good camera work man you sure are a real good mechanic I hate this time of year be safe my friend
Gordon you are the man, your expertise will not go to waste. Thank you!
I'm still love you gordon it's been long enough to come back and say it. that's a good video specifically the lighting and camera angles details. thank you sir.
I done it for 57 years and I’m now retired but still have a set of each in toolbox
Plus both popular series
Even compressor gaskets
Even have my DD box and chips for trouble shooting
Like always sir. Thank you very much for the video, Im always learning something new to make my own repairs on my 60 series !
Dang wish I was there to help you. I really miss the shop
Another great video Gordon, hope you had a great Thanksgiving.
Thanks for watching Albert.
Thanks for the video. Other was saying that was the TRS . Thanks for confirming that is srs. Great video.
Gordon not sure if you're aware facebook has a detroit owners group where you're expertise could help a lot of detroit owner ops assuming you had time for that....Happy holidays to you sir..looking forward to more uploads take care!
Another Good One 💖💖💖
Thanks for watching Poptart.
You should replace both at same time. One is above the other
Thank you sir you safe me 10f outside I watch your video GOT POSTED you
Great info.
Thanks for watching Bill.
Great job Gordon
I have switched to the folding slim lights that are rechargeable. Really handy!
I don't think I know which one that is. There's a hundred good lights these days. I will be doing a review video on a new wall light that was sent to me asking me to do a video on it.
Another great video. Thank you. Why did you change this sensor what are the symptoms when these go bad.
I have a Cummins N14 mine went out and I could not tell any difference in the way the engine was running. Only way I knew was the check engine light came on.
I just changed the TRS sensor last week because the truck wouldn't start and this one is a good idea to change at the same time.
Great Video Gordon. Hope you had a great Thanksgivings
Thanks Don. I hope you had a good Thanksgiving as well.
THANK YOU - Excellent video! What other 60 Series sensors have you needed to replace over the years? Ever had to replace a VPOD on a 14L 60 series? Wondering what all I should replace proactively. THANK YOU AGAIN
Good job Gordon. Jay
Thanks for watching Jay.
I'm still lost. What exactly does this SRS sensor do? Thanks for this video and all your knowledge 👍🏿
it's a timing sensor like the cam sensor on a car. SRS means synchronous reference sensor Just google srs sensor
Good job. Tangly location of the sensor. Can always be worse though.
Much appreciated
Thanks for watching.
Thank you Sir
Thanks for watching.
Have you read or seen the FMCSA is going to be changing the pre emissions 2000’s and older over to the EDL ? They have it on the website to read up on but how is it possible to put it on the older ECM’s and program it to the truck ?
Let me know what you think about how it can be hooked up so later on I will know what I need to do
Please 💖💖💖
Thanks
I have not heard about that yet. It is possible to hook that up to any ECM. I think the ELD has the the GPS in it.
@@57bagre ok I was wondering
I had no problem connecting a 9 pin GeoTab eld to my 97 fld120
It’s really best to change both but it’s the customer choice
You can buy the plug with 6 inches of electric wire from DD and suggest you get one just in case
These old girls will be running when we’re both dead and gone
Hello is that like the rpm sensor ?
Hi, my engine detroit Series 60 doesn't start when hot, what could be the problem please ?
Gordon this controls RPM input on the tachometer? After we serviced the air pump this starts to random fail .
I don't know, maybe need to clean wire connection or repair wire since it's the only sensor by the compressor, the "TRS" is under the compressor but the truck won't run if that has a problem.
@@57bagre thanks sir
Awesome video 👍👍👍👍, but how could we contact with you?
gordonrdiy@yahoo.com or just ask a question on any of my videos.
@@57bagre Thank you. I send an email to you. 😀
What made you believe that you had to change the tsr and csc sensor's out ?
PLEASE For the love of GOD Use a tripod or camera Stand
He records these videos as a courtesy not because he has to! Filming adds a lot of time to the job and standing out in the cold sucks!
Thanks Will.
Why are you even complaining in G MAN...
This man has gone out of his way for years now helping So many, In so many ways.....
There are a lot more things in life to complain about other than a guy That has taken time to show people How to do things.
I hope you at least watch all of Gordon's videos....
Be appreciative of his videos and time to help us. There are other things you could complain about.