Although less sensitive than the P.I Delta Pulse 2 and heavier this is a very good V.L.F one. It has a perfect stability and gives a nice sound. It's to be made. I was about to give up thinking that there was an error in the diagram i couldn't find out when i caught the culprit who prevented it from working from the beginning . A short strap that detached in the inside from the weld.
Your explanation about the circuits is very good. I would be grateful if you could explain about the discrimination part of this circuit and how it works from the transmitter and receiver signals. Thanks...
I really like your video's. You show alot of what's going on and how to do it. What test equipment do you need . Where do you get your boards and part's from. Please keep the video's coming.
Hello my friend, I enjoy the learning process about these circuits, In order to build them I recommend a 2 channel oscilloscope to get started. If you want to get a kit or a board give this site a look, he is a fellow member of Geotech. diydetector.co.uk/store/index.php
hello , if possible I want to know how you nulled the coil oof idx pro , because I only know the nulling configuration for tgsl coil, thank you very much for your informative videos about this project ❤
@@SurfDetector I appreciate your help , thak you very much , I wish if I could see a complete video since there are only few short videos and not explained. if possible, I would like to see a video on youtube, because the way you explain electronics you make it easy for anyone how has just basic knowledge on electronics, a big thank you for the link 🙂
Hi Gary, your comment just showed up even though it looks like it is old. Who sent you over to my channel? Thanks for the sub. I will check out your videos. Cheers.
Hello, nice explanation, but I have a question, is the Tx signal moving back and and forth, or the GB and Disc signals are the one which moving , in other words Which one is the fixed signal , and Which one is the adjusted ones, phase shift adjustment is made by which signal? Because you mentioned that the TX signal is the one which moving. Thank you for your videos
In retrospect I should have explained that the potentiometers were to adjust the phase difference between the RX and the respective GEB and DISC samples. Thanks for watching and commenting.
@@SurfDetector It's my pleasure to watch your videos , I really like the way you explain each part of the circuit separately, it makes things more simple to understand, I would like to see even further details , for example why the phase ajustment for GB take a specific position with respect to RX , and the same thing with the discrimination part, and maybe talk about the ground and the metals , and hoe can we eliminate what we want , just by ajusting the phase between RX and GB/Disc Samples. Thank you for your helpful videos. good luck 🙂
Hi there, glad that you are enjoying my content. Please subscribe if you have not done so already. Some of the PCBs I had made from Gerber files and some were obtained from diydetector.co.uk
Hi Bro Im Need How many turns of winding should be used with 35 or 40 cm 0.30 copper wire for round pulse detector? and how many capacitors need to be installed
www.geotech1.com/forums/showthread.php?17909-Coil-Calculator You do not need any capacitors for a Mono-Coil. I made a video on how to make a Mono-Coil here: th-cam.com/video/AqZEsPaXV-Y/w-d-xo.html
Hello Emin, You will need to experiment in order to make custom size coils. The coil calculator does not work well unless you are making a circle. When you make the coil into a "D" shape the inductance changes. It is best to have an inductance meter and an oscilloscope. For the RX you need about 47nF capacitor. For the TX about 1uF. These values are close but you need to experiment in order to get as close as possible to the correct frequency.
@@emindagkran5839 Hi my friend. I thought that you were asking about a VLF DD coil since the video that you commented on is about building a VLF machine. Here is a coil calculator that is good to use for Mono-Coils: www.geotech1.com/forums/showthread.php?17909-Coil-Calculator
Hi my friend. I am back at work with my real job now after the Covid lock-down so I have very little time for projects right now. I will finish but it will not be soon.
Hi my friend, I am Surf Detector. With a VLF machine the air detection distance is always more than detection in the soil. This machine is not like a PI machine.
@@bayramgurdal5739 I bought my SurfPI pcb from Silverdog. All of the information that I have is from the Geotech Forum. You should make the Arduino PI, it is better than the other and the Gerber files are on Geotech.
good afternoon friend I would like to know how the potentiometers are connected I have an idx pro board mounted but I don't know how to connect the potentiometer
the frequency of the tx coil on my board is 6,453 and my rx coil is giving the same frequency as the tx coil How do I measure the frequency of the rx coil with a multimeter that has a frequency scale? and what are the correct frequencies for the coils?
TX 6.59KHZ maximum RX 4.9KHX maximum (I did mine at 4.75KHZ) Your TX and Rx cannot be the same I did separate videos on both the RX and also the TX part of this project, you should watch them.
@@SurfDetector sorry but i don't speak english and the you tube translator doesn't translate well what i would like to know is to measure the frequency of the rx coil do i need to have a signal manager?
@@SurfDetector what is the easiest way to measure the frequency of the rx coil? can i change the tx coil and put the rx coil just so I can measure the frequency?
Hello Mr I have been following u for a while, and I really like your helpful personality, I literally watched all ur videos, and read the comments, even I downloaded the book of inside the metal detector that you use to suggest, and and made my first metal detector, PI 4. But now I have some matters to talk about with you, its an important matter maybe for all of us. I just need your email. Thanx
Hello, Thank you for your kind words. I encourage everyone who wants to learn more about building metal detectors to join the Geotech Forum. Post all of your questions to the forum so that way others can have the opportunity to join in the discussion and learn. www.geotech1.com/
Hi my friend. There is no Hex file for this project as there is not a PIC. I do not have any pdf build file either. I am not sure what you are looking for.
You confuse me by asking questions about the PI Polones on a video for the IDX Pro. What does the Polones have to do with the IDX Pro my friend? Here is a link to the pcb that I used: easyeda.com/jeanfreitas/pcb2-placa
Although less sensitive than the P.I Delta Pulse 2 and heavier this is a very good V.L.F one. It has a perfect stability and gives a nice sound. It's to be made. I was about to give up thinking that there was an error in the diagram i couldn't find out when i caught the culprit who prevented it from working from the beginning . A short strap that detached in the inside from the weld.
Your explanation about the circuits is very good. I would be grateful if you could explain about the discrimination part of this circuit and how it works from the transmitter and receiver signals.
Thanks...
I really like your video's. You show alot of what's going on and how to do it. What test equipment do you need . Where do you get your boards and part's from. Please keep the video's coming.
Hello my friend, I enjoy the learning process about these circuits, In order to build them I recommend a 2 channel oscilloscope to get started. If you want to get a kit or a board give this site a look, he is a fellow member of Geotech.
diydetector.co.uk/store/index.php
@@SurfDetectorكيف الحصول على ثلاثه الوحه
hello , if possible I want to know how you nulled the coil oof idx pro , because I only know the nulling configuration for tgsl coil, thank you very much for your informative videos about this project ❤
You can see a brief description here on the last page.
www.hobbielektronika.hu/forum/getfile.php?id=229031
@@SurfDetector I appreciate your help , thak you very much , I wish if I could see a complete video since there are only few short videos and not explained. if possible, I would like to see a video on youtube, because the way you explain electronics you make it easy for anyone how has just basic knowledge on electronics, a big thank you for the link 🙂
Goodmorning sent over. Subbed.
Hi Gary, your comment just showed up even though it looks like it is old. Who sent you over to my channel?
Thanks for the sub. I will check out your videos. Cheers.
@@SurfDetector Yeah I don't even remember I got this message and I think I left it like a week ago no biggie.
Hello, nice explanation, but I have a question, is the Tx signal moving back and and forth, or the GB and Disc signals are the one which moving , in other words Which one is the fixed signal , and Which one is the adjusted ones, phase shift adjustment is made by which signal? Because you mentioned that the TX signal is the one which moving.
Thank you for your videos
In retrospect I should have explained that the potentiometers were to adjust the phase difference between the RX and the respective GEB and DISC samples. Thanks for watching and commenting.
@@SurfDetector It's my pleasure to watch your videos , I really like the way you explain each part of the circuit separately, it makes things more simple to understand, I would like to see even further details , for example why the phase ajustment for GB take a specific position with respect to RX , and the same thing with the discrimination part, and maybe talk about the ground and the metals , and hoe can we eliminate what we want , just by ajusting the phase between RX and GB/Disc Samples.
Thank you for your helpful videos. good luck 🙂
Thank you for watching Samir.
Hi love your video's,very informative 👍
Where do you get these boards from....
Hi there, glad that you are enjoying my content. Please subscribe if you have not done so already. Some of the PCBs I had made from Gerber files and some were obtained from diydetector.co.uk
If you ever made your own one I would test it out brother fore sure u no your stuff brother fore sure you legend
Cheers Terry, thanks for your support mate. 👍👍
Amazing🏴🥰🎉💖👋
Thanks for watching and please subscribe if you are interested. I have more videos on the way.
Cheers
Hi Bro Im Need How many turns of winding should be used with 35 or 40 cm 0.30 copper wire for round pulse detector? and how many capacitors need to be installed
www.geotech1.com/forums/showthread.php?17909-Coil-Calculator
You do not need any capacitors for a Mono-Coil. I made a video on how to make a Mono-Coil here:
th-cam.com/video/AqZEsPaXV-Y/w-d-xo.html
How many turns of 40 cm coil, how many capacitors
Hello Emin,
You will need to experiment in order to make custom size coils. The coil calculator does not work well unless you are making a circle. When you make the coil into a "D" shape the inductance changes. It is best to have an inductance meter and an oscilloscope. For the RX you need about 47nF capacitor. For the TX about 1uF. These values are close but you need to experiment in order to get as close as possible to the correct frequency.
@@SurfDetector monoloop coil bro pi dedectör coil
@@emindagkran5839 Hi my friend. I thought that you were asking about a VLF DD coil since the video that you commented on is about building a VLF machine.
Here is a coil calculator that is good to use for Mono-Coils:
www.geotech1.com/forums/showthread.php?17909-Coil-Calculator
@@SurfDetector thx bro🤣🤣
Hello
I really appreciate your work
And I like to see the rest
Please show us the parts
Hi my friend. I am back at work with my real job now after the Covid lock-down so I have very little time for projects right now. I will finish but it will not be soon.
Please subscribe to my channel
Hello, from Barcelona, Spain 🇪🇦. It is a very nice. Subscription and full watch from 🇪🇦👍✍️✍️🔔 Thank you.
Thanks for visiting
Very nice my friend love you
Thanks for visiting
hello bronte one master;idx pro air test works well soil does not pierce.what can i do for 30 cm depth thanks
Hi my friend, I am Surf Detector.
With a VLF machine the air detection distance is always more than detection in the soil. This machine is not like a PI machine.
@@SurfDetector thanks master
@@SurfDetector hello master.
can you share surfpi pcb and info.thank you so much
bayramgurdal@gmail.com
@@bayramgurdal5739 I bought my SurfPI pcb from Silverdog. All of the information that I have is from the Geotech Forum. You should make the Arduino PI, it is better than the other and the Gerber files are on Geotech.
good afternoon friend I would like to know how the potentiometers are connected I have an idx pro board mounted but I don't know how to connect the potentiometer
You need to take your schematic and match it up to the PCB in order to figure out the connections.
@@SurfDetector for me to measure the coil frequency (rx), can i replace the tx coil and put the rx?
just to measure the frequency of the rx coil
Yes, exactly
the frequency of the tx coil on my board is 6,453 and my rx coil is giving the same frequency as the tx coil
How do I measure the frequency of the rx coil with a multimeter that has a frequency scale?
and what are the correct frequencies for the coils?
TX 6.59KHZ maximum
RX 4.9KHX maximum (I did mine at 4.75KHZ)
Your TX and Rx cannot be the same
I did separate videos on both the RX and also the TX part of this project, you should watch them.
@@SurfDetector sorry but i don't speak english and the you tube translator doesn't translate well what i would like to know is to measure the frequency of the rx coil do i need to have a signal manager?
@@SurfDetector what is the easiest way to measure the frequency of the rx coil?
can i change the tx coil and put the rx coil just so I can measure the frequency?
The easiest way is to just swap out the TX coil for the receive coil, I believe that my video shows me doing that.
Thanks for watching.
Hi
Please how Can i buld coil 25 cm for pi métal detector golden Mask deep hunter pro 5
Think's lot
I have 3 different videos specifically about building coils for PI detectors. Have you watched any of them?
That should get you started.
ممكن توضح لنا أفضل جهاز لا يتأثر بالتربة ويكون على عمق كبير
Hello Majid,
I think that you need to use a Pulse Induction detector.
@@SurfDetector arduino nano?
@@مجيدوحيد-ذ8ق yes that is a Pulse Induction machine and is an relatively easy project. It really depends on what you are looking for.
@@SurfDetector ماهو البرنامج الخاص بطباعة لوحة pcb
@@SurfDetector لقد نزلت ملف .Gbr
Hello Mr
I have been following u for a while, and I really like your helpful personality, I literally watched all ur videos, and read the comments, even I downloaded the book of inside the metal detector that you use to suggest, and and made my first metal detector, PI 4.
But now I have some matters to talk about with you, its an important matter maybe for all of us.
I just need your email.
Thanx
Hello,
Thank you for your kind words. I encourage everyone who wants to learn more about building metal detectors to join the Geotech Forum. Post all of your questions to the forum so that way others can have the opportunity to join in the discussion and learn.
www.geotech1.com/
Je trouve que 3v dans la sortie d 7805
You either have a counterfeit 7805 or perhaps it is mis-marked 3.3V. There is no 7805 in the IDX Pro.
Please subscribe my friend.
hex and pdf. tanks
Hi my friend. There is no Hex file for this project as there is not a PIC. I do not have any pdf build file either. I am not sure what you are looking for.
I want to assemble the Polons metal detector myself. To assemble it, I need a file of its parts and operator training
Didn't you collect Polones yourself?
You confuse me by asking questions about the PI Polones on a video for the IDX Pro. What does the Polones have to do with the IDX Pro my friend?
Here is a link to the pcb that I used:
easyeda.com/jeanfreitas/pcb2-placa
I'm not very good English. I'm Persian. Thanks for your guidance
Salut
Salut my friend
Sur,can you send to me the files in my gmail,special pi polnes .pls
Majid, the schematic is here:
simplemetaldetector.com/pulse-induction-metal-detectors/idx-pi-metal-detector/idx-pro-schematic/
Sorry,but i want pcb for print it ,if you can
All I have is the schematic.
@@SurfDetector ok,thank you sur