thanks for the review! could u say, which one of K2 or Y6 Musetex case is better? I'm struggling to find the differences, except that Y6 comes with RGB fans and that it's different sizes
Hi ineonfox4787, I personally like the Y6 Better, but if you must use an ATX motherboard, the K2 is probably the better choice out of the two. The Y6 will do it, but it's a tight fit. You might be able to find the K2 with RGB fans, just look at how they are packaging it. Obviously, you can add your own fans if necessary, but I understand that has to be part of the calculation for cost. I hope that help, thanks for watching!!!
Not a bad case. But I would not put any fans on the bottom. They would starve for air. There’s nowhere near enough ventilation in the PSU basement for those fans to provide enough airflow. Bad design by Musetex
Hi IQKSQV, this specific K2 I have doesn't have RGB lighting that came with the case, but based on the Y6 I just looked at that did have RGB lighting, it didn't have an RGB hub, so you would need to connnect the RGB connection to a 5v RGB header on your motherboard, or purchase a 5v ARGB hub to connect them up to. You would then control this hub connecting it to a 5v ARGB header on your motherboard. Some HUB's have a controller built in and can switch between the built in controller or allowing your motherboard to control, such as this one: a.co/d/c9DccZy I hope that helps, thanks for watching!!!
Hi there, I am a new subscriber, first of all I really enjoy your videos, second, in your opinion, for Atx motherboards which one do you prefer the most, the Musetex K2 or the Y6, beforehand thank you so much 🫡
Hi Indelebleu, thank you for your support!!! For standard ATX, the K2 is more suited to that and I do like that case, i've been playing around with it. ATX will work in the Y6 it was just a tight fit and I preferred MATX in the Y6. I like the Y6 case better than the K2 in the looks and layout, but the K2 has been a cool looking case as well. I plan to do a follow up video soon when time allows. Out of the two cases, I prefer MATX in the Y6, but either way is fine. Good luck and Have fun, thanks for watching!!!
@@HardwareArtisan thank you so much for replying and also for your kindness. I really appreciate it. I’ll be waiting for the video, it sounds really interesting.🫡 Have a nice weekend @HardwareArtisan
Great review, you put a great amount of effort into it, well done!
thanks for the review! could u say, which one of K2 or Y6 Musetex case is better? I'm struggling to find the differences, except that Y6 comes with RGB fans and that it's different sizes
Hi ineonfox4787, I personally like the Y6 Better, but if you must use an ATX motherboard, the K2 is probably the better choice out of the two. The Y6 will do it, but it's a tight fit. You might be able to find the K2 with RGB fans, just look at how they are packaging it. Obviously, you can add your own fans if necessary, but I understand that has to be part of the calculation for cost.
I hope that help, thanks for watching!!!
Not a bad case. But I would not put any fans on the bottom. They would starve for air. There’s nowhere near enough ventilation in the PSU basement for those fans to provide enough airflow. Bad design by Musetex
That's a great point mikebaker2927, I'll bring this up in a follow up video. Thanks for watching!
Did yours come with standoff screws for motherboard? Mines didn’t
I think the motherboard comes with them.
can we fit a vertical gpu and 3 bottom fans in there ?
I'm looking at my K2, and it seems like it would be a tight fit; but I'm not sure
My 4090 fits in this case with a cooler master vertical mount
Hello I need you I bought this case and how do we start the rgb on the case
Hi IQKSQV, this specific K2 I have doesn't have RGB lighting that came with the case, but based on the Y6 I just looked at that did have RGB lighting, it didn't have an RGB hub, so you would need to connnect the RGB connection to a 5v RGB header on your motherboard, or purchase a 5v ARGB hub to connect them up to. You would then control this hub connecting it to a 5v ARGB header on your motherboard.
Some HUB's have a controller built in and can switch between the built in controller or allowing your motherboard to control, such as this one:
a.co/d/c9DccZy
I hope that helps, thanks for watching!!!
Hi there, I am a new subscriber, first of all I really enjoy your videos, second, in your opinion, for Atx motherboards which one do you prefer the most, the Musetex K2 or the Y6, beforehand thank you so much 🫡
Hi Indelebleu, thank you for your support!!! For standard ATX, the K2 is more suited to that and I do like that case, i've been playing around with it. ATX will work in the Y6 it was just a tight fit and I preferred MATX in the Y6. I like the Y6 case better than the K2 in the looks and layout, but the K2 has been a cool looking case as well. I plan to do a follow up video soon when time allows. Out of the two cases, I prefer MATX in the Y6, but either way is fine.
Good luck and Have fun, thanks for watching!!!
@@HardwareArtisan thank you so much for replying and also for your kindness. I really appreciate it. I’ll be waiting for the video, it sounds really interesting.🫡 Have a nice weekend @HardwareArtisan