Troubleshooting a starter issue NSR Tech
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- This video shows how to find out if its a control, starter, ground or battery issue in a starting system of a motorcycle. We have more tech videos at Northstarriders feel free to come take a look
excellent video, thank you so much for sharing
I agree wholeheartedly with pnwood comment, I got lost but i am not very sharp. But I appreciate it.
When he was testing the starter relay, where was he grounding to (where is he placing the black multimeter probe)?
Not bad. And, thanks for your effort.
But, a smoother, down the line, sequence, would have been easier to follow. Doesn't look like a preview outline was performed.
This clip may well have lost those in the audience who didn't know the circuit.
However, useful information, for those who could see it through.
Can I pull the battery and jump the starter motor while it's still installed on the bike just a quick sec or two to verify energizing the starter motor works?
i have an06 honda vtx and lately my bike turn over many times until it starts and then it runs great....I have cleaned the start/stop switch but no change
My 1500 drifter, (2000) model,, clatterd and will not start but I can hear something spinning at a high rpm. Do I have an abendex type part broken or should I just replace the whole starter ?
800 Vulcan won't start grinds like starter is bad put on new starter same thing just grinds opened engine everything looks good no teeth ground off no metal shavings in oil. Any ideas what the problem could be
My bike starts up fine for a couple seconds then turns off, then hit the ignition and makes a clicking noise. And the battery was just charged. What could it be?
Dude whats the best easiest way to by pass alll those wires one of those push button directly into starter simple easy and it here its a diect connection from battter
Put new battery in go to hook up cables and it trys to crank
So if theres a bad ground it will affect the way a starter functions?
jmlpz74 i
So I bought a new starter relay but I get multiple clicks no turn over. I jumped started it and it starts up if I take the cables off it'll turn off after 1 minute. I have anew battery also and it started the first time but now it won't start at all....
Walter V you have a charging issue. Rectifier or stator. Or loose connection from those two areas
When I turn my key and press the start button, i get nothing, no sound, no anything. Just lights and horn. However, when I put a wire from hot to starter and "hotwire it" it cranks up. Why wont that button make any noise or anything?
Seabreeze Rides you need a new battery. Your old battery is worn out it doesn't have enough cranking amps.
I got a big problem when I was trying to turn on my bike it's turn the fuel pump normally and the light , as soon as I press there start button the do a click and everything turns off......I check the battery it has voltage I'm thinking it's the relay but now it does not even turn the light on, ...I left the key turn on and it turn the fuel pump like 30second latter
lostone4711 yes I found it was the batery... it was dying when I use the multimeter on the batery it say 12v.... but as soon as I press the start button it when down to 2v..... check the batery.......if that not it take a screw driver and tosh positive and negative ( with the key on)....on the main relay if it's starts the problem can be the main relay or starter relay depending how you called
LORS13 g
I have power to my solenoid, but starter won't even click.. Any suggestions?
Sometimes there is a main relay or main body fuse on some bikes. This relay or fuse may have gone bad. (Not the starter solenoid.) Do your lights turn on when you turn the key?
Brandon Rodgers I have similar problem and yes my lights turn on and sometimes if I take these plugs off and put em back on solenoid it was starting. but I'm Tryna get it working more efficiently..
Starter solenoid.
1+