Hahah, no giveaways from me! I didn't build this channel on that type of foundation (like this, favorite, subscribe, giveaways) I built it to naturally gain people who want to be a part of this or search for this kind of stuff which helped me eliminate fake subscribers if anything, so thanks to all those who subscribed, cheers!
I'm a bit confused, are you referring to the yellow tape or perhaps the industrial grade (usually gray)? Thats the only thing I know as "gas tape" but there are many variants of it and difference in strengths/application. Do the video on it, I'd love to see the results if anything! ^_^
I applied permatex gasket maker and I let it sit for a week what I found is that every time I shot the permatex would shoot up through the air seal gasket on mag like a silly string can. It fucked up my blow back housing. What do u think went wrong. Didn't give enough time to cure or out too much. I'm kinda nervous to do this mod again because my mags were sparaying gasket Baker everywhere
yea that happened to me a couple of times, it was either it didn't cure properly or a bad gasket bag. try a different company if it keeps happening or try just buying new gaskets
I used gas tape as recommended by Eagle leader, works better then Teflon or plumbers tape, 1 second of gas got out 10 rounds when I put tape in the mag and the piston. I plan to make a comparison test later.
@KnuckelsGSM need help, I have 2 TM extended mags and both are leaking from the bottom. Tried to fix them with plumber tape, but it still leaks quite a lot. Do you have any recommendation how to fix them?
I’m sure there’s other videos but this ones hella informative thanks I’m new I blew the tiny gasket outside the mag out that connect with your green gas nossle.
Hahah, no giveaways from me! I didn't build this channel on that type of foundation (like this, favorite, subscribe, giveaways) I built it to naturally gain people who want to be a part of this or search for this kind of stuff which helped me eliminate fake subscribers if anything, so thanks to all those who subscribed, cheers!
I'm a bit confused, are you referring to the yellow tape or perhaps the industrial grade (usually gray)? Thats the only thing I know as "gas tape" but there are many variants of it and difference in strengths/application. Do the video on it, I'd love to see the results if anything! ^_^
I applied permatex gasket maker and I let it sit for a week what I found is that every time I shot the permatex would shoot up through the air seal gasket on mag like a silly string can. It fucked up my blow back housing. What do u think went wrong. Didn't give enough time to cure or out too much. I'm kinda nervous to do this mod again because my mags were sparaying gasket Baker everywhere
yea that happened to me a couple of times, it was either it didn't cure properly or a bad gasket bag. try a different company if it keeps happening or try just buying new gaskets
Never knew the o-ring can go inside out o.o
-_-
I Need help I just bought a brand new WE hi capa mag for my kjw kp06 but it wont shoot after i fill it with gas.
return it and get the kjw mags
@@KnucklesGSM ok
1000 subs! Tokyo Marui pistol giveaway! Lol :p
I used gas tape as recommended by Eagle leader, works better then Teflon or plumbers tape, 1 second of gas got out 10 rounds when I put tape in the mag and the piston. I plan to make a comparison test later.
My hi capa when i shoot it only 7-10 rounds were shoot then the gas is finished I don’t know why is the gas is very fast to drain
@KnuckelsGSM need help, I have 2 TM extended mags and both are leaking from the bottom. Tried to fix them with plumber tape, but it still leaks quite a lot. Do you have any recommendation how to fix them?
Hahaha, thanks bud! I'm very happy that it was done without the typical youtube marketing style either which is cool :)
I bought a pistol but the bbs don't feed because they get stuck on the mag where it goes from double stack to single, what should i do?
@KnucklesGSM do you by any chance have the dimensions of those red O-rings?
My mags just won’t shoot, it’s acting like there’s not even a mag in it
I’m sure there’s other videos but this ones hella informative thanks I’m new I blew the tiny gasket outside the mag out that connect with your green gas nossle.
So far this is d best cam focus you ever had
Thanks man very instructional
:P
Hi could you help me
So close to 1000 subs! Congratz :)
YAY NEW VIDEO!!!!