Cisco Multi-layer Switch Lab 1 Walkthrough | Cisco CCNA 200-301
ฝัง
- เผยแพร่เมื่อ 13 พ.ย. 2020
- This is the first walk-through (of 3) for the free multi-layer switching and routing packet tracer lab date 2020-11-13 (link below to download)
Enjoy.
🆓 Free Packet Tracer Labs download: thekeithbarker.com
Free TH-cam Playlists from Keith:
▶ Master Playlist for Cisco CCNA 200-301 ogit.online/sloth
💻 Cisco CCNA 200-301 IPv4 Subnetting ogit.online/subnet
💬 Join our Discord server (free) ogit.online/Join_OGIT_on_Discord
🏪 Keith Barker Amazon Affiliate Store www.amazon.com/shop/keithbarker
And…
🏫 Keith’s Content at CBT Nuggets ogit.online/Keith-CBT
#KeithBarker #CCNA #200-301
Thank you to everyone who did the hands on practice!!!! You rock.
Happy continued studies.
This video is great!! Clear and to the point!
Thank you @caseycrawford4994!
The way & enthusiasm you put in your videos 👌 motivate anyone to go to study network
Very helpful this lab, quick, efficient and direct to the point. Love it.
Great to hear!
Love a Keith lab. Going to try it out first then come back to watch if I may.
Thank you Nick Fletcher for working on that lab! Hands on practice is one of the best ways to build your skills, and get better. Thank you!
Thank you
Excellent 👌👌👌
Thank you! Cheers!
This lab was interesting to me for a few reasons. First I decided to do this lab on real hardware with my 3560 8 port and a 1921.
1. I wasn't able to run ospf on my switch because I only had the ipbase image.
2. I upgraded my switch but my switch got stuck in a boot loop so I pressed and held the mode button on the switch and went into "switch" mode.
3. Upgraded the IOS on the 3560 to the ipservices image using xmodem.
4. Completed the 1st lab after 3 days.
Thanks Keith for the video.
Thank you zoltron30 for doing it hands on! Hands on practice is one of the best ways to build your skills, and get better. Thank you!
Following this lab step by step but my switch is ipbase and does not include OSPF as a feature. Once upgraded, I'm going to complete this lab.
Hey Keith, is it best practice to only use the network 0.0.0.0 with a wild card mask of 255.255.255.255 when trying to pulling in all networks in both live environment and or lab?
Thank you for the question Jose M. In a lab it it fine. In production you may be including interfaces that weren't intended. Also, in a lab where you have multiple areas, the router that is connected to both would need more granular network statements to let it know which interfaces are in area 0 and which interfaces are in a non-backbone area.
can i ask why this don't work?
mls - network 10.1.0.0 0.0.0.255 area 0
R1 - network 10.3.0.0 0.0.0.255 area 0
Thank you for the question lior.
On the MLS it has the addresses of 10.2.0.2 and 10.3.0.2
The 10.2.0.0 network is between R1 and MLS
On the MLS to enable OSPF you would want a network statement of:
network 10.2.0.0 0.0.0.255 area 0
On R1 you would need the same network statement.