If I'm not mistaken. The Tsuru was offered in Mexico till 2017 but in 4 door. The only offered 2 doors for a limited time and it was called GSR2000. Nice car Sir.
Excellent video. I'm a mk1 focus guy now (boosted) but my first love was the b12 that I rocked just after high school in '89 Loved that car and also the SE-R's that came just after. You built your car the exact way I would if I were to build a b13. Very nice car bro 👍👍
As always- informative and ill ass content. Maybe this slipped under my radar but damn didn’t know that B14 control arms were a whole inch longer than B13 ones- must benefit the hell out of the camber, how she sits and handling. Keep doing what you do and spreading that SR20VE knowledge and gospel my man! 😄🤙🏼
When you do decide to do the coil on plug set up don't forget to document and share an in dept video, and did the VE head line up perfectly with the Xtrail block?
Absolutely nice set up nicely displayed also I’m in the ATL Also seems like you know what you’re doing I have one I’m trying to get some work done on it love to get some feedback from your brother
I'm loving what you did to the Nissan I'm trying to do a similar build but got a natural aspirated SR20 de. I'm looking for a ecm and turbo that can work for sr20det
Is there anyway i can make my nissan sentra 2007 2.0 a sleeper somehow i got the opportunity to buy a new engine still have not got the new engine for the car yet but reason is because i blew a piston any help?
Unfortunately I have no experience with that platform and typically only deal with 2000 and older Nissans. It’s just less headaches. Nissan kind of took a turn for the worst after 2000
No it will not, but you can make an adapter plate to make it fit. However you will probably lose power doing this because the ITBs are too small for a VE head and it will limit flow
Is the vet intake manifold interchangeable with the p11 head, I'm sure it uses a larger throttle body 70mm and drive by wire, good for traction control in a fwd.
Question Commander- how hard was it to retrofit the Morimoto projector lenses into the Tsuru headlight housings? Was this project difficult or can you recommend a tutorial or instructions? Love them! 😉🤙🏼
By any chance, do you have a obd2 to obd1 jumper? I'm running a 99 non rr into a 96 200sx with nistune, sr16ve pistons an gasket,20v headers,s4 cams. Was hoping you may have 1 or know someone with 1. Keep up the vids fam, mine wont be done for awhile like yourself.
Is there anyone out there that knows someone in the Atlanta area that is good with the B 13 if so reach out to me please. I have a 1993 and would like to get some engine work done.
Hey man am from.d caribbean I have a 93 sentra want to do sum upgrade on it but will like to get some ideas from you been following you and like what u do . .....will love to hear back from u
I don’t have much information on the carbureted models as they didn’t come to my country. But I would say this. A motor is just a big air pump. The more efficiently you can get air in and out of it the more HP you will make.
The Tsuru after 2000 its a real lame "car". All the chasis were made whit thiner metal, less suspension parts and interior are the worst part In my country until 99 were still decent.
Perfect example of a well built SE-R. Damn I miss mine. Nice build.
If I'm not mistaken. The Tsuru was offered in Mexico till 2017 but in 4 door. The only offered 2 doors for a limited time and it was called GSR2000. Nice car Sir.
SICK!!! i just picked up probably the last bone stock 91 se-r on earth just yesterday! lol. ill post on my page later today. u got a new sub too bro.
God damn this car is beautiful. My boy has a 91 b13 sr20 swapped sentra sitting in his garage the last 4 years gotta try an scoop it from him one day.
Excellent video.
I'm a mk1 focus guy now (boosted) but my first love was the b12 that I rocked just after high school in '89
Loved that car and also the SE-R's that came just after.
You built your car the exact way I would if I were to build a b13.
Very nice car bro 👍👍
You are awesome bro! Thanks for making it clear that none of this happens over night. You are a motivation and guidance to a whole lot. Keep it up. 💯
I always thought these cars are completely slept on
Good build & great Sentra.
That's why I love my b13...
Nice simple & clean car
Sentra’s most beautiful model by far
As always- informative and ill ass content. Maybe this slipped under my radar but damn didn’t know that B14 control arms were a whole inch longer than B13 ones- must benefit the hell out of the camber, how she sits and handling. Keep doing what you do and spreading that SR20VE knowledge and gospel my man! 😄🤙🏼
When you convert to 6 speed the axles May bind up because they are longer. Using b14 control arms will help a little with axle bind
@@sr20tech82 one learns something new everyday! 😉🤙🏼
Yeah but sadly the whole rear loses control arms and goes to the beam system so no camber in the rear
Very Nice, car, movies and sound.
Love the ride man, sick build!
Am from the Caribbean and i have a 4 door...Nissan b13..1994
Sick B13 bro! 🐰🤌🏻
Very nice car. Super dope
Nice car. Beautiful !!!!...
i dig your build 💎
🔥🔥🔥I’ll never forget my very first car 94 Nissan Sentra 4door. I always wanted the se-r though
you can also put an all wheel drive Nissan Sentra B13 Attesa
Nice car!!!
I believe b13 production stopped in Mexico on March 2017.
Awesome car Tsuru ended in 2017 💯
Love iiiiit
Baia hermoso sentra bro de 10 😎
Blacc b13 be tough 🔥
need the SR16 cam they are way more aggro
I would love to have a nissan primera p10 egt with a sr20ve from a primera p12
When you do decide to do the coil on plug set up don't forget to document and share an in dept video, and did the VE head line up perfectly with the Xtrail block?
Yes it’s a bolt on affair
She ready for that carbon tdmi lip plaayyaaaaaa
Absolutely nice set up nicely displayed also I’m in the ATL Also seems like you know what you’re doing I have one I’m trying to get some work done on it love to get some feedback from your brother
I have a stock and running 94 LE that I would love to get 400+HP
I'm loving what you did to the Nissan I'm trying to do a similar build but got a natural aspirated SR20 de. I'm looking for a ecm and turbo that can work for sr20det
Best bang for buck ecu right now is a nismotronic. It basically turns your stock ecu into a standalone
damn nice b13
Sir which 6speed manual gearbox do you have in the car?
What's the name of the shop ? Awd b13 I'm interested
dream build 😍
Yo, I notice you still using spark plug cables with the sr20 ve valve cover. Can you share how you get the cables to fit...
You have to trim the rubber down until the plug wire can fit correctly
Hey brother do you ever think youll do a full break down on how to set up a sr20ve with a turbo?
Maybe if one comes into the shop.
Just send this to my local b13 club members..in T&T...
Is there anyway i can make my nissan sentra 2007 2.0 a sleeper somehow i got the opportunity to buy a new engine still have not got the new engine for the car yet but reason is because i blew a piston any help?
Sell that car and get a ser 2.0 is trash not the same as the old sr20
Unfortunately I have no experience with that platform and typically only deal with 2000 and older Nissans. It’s just less headaches. Nissan kind of took a turn for the worst after 2000
The awd tell me more bro
👏🏾
My dream daily and how the SER shoulda came VET woulda cemented the B13 in 90s “JDM” culture
How can I get a pair of those bumper lights?
They still sell on EBay just very expensive
How much horsepower did this setup make?
Please help me with my car build I have ac to fix and hoses to replace and I don’t even know where to start
I’m located in Atlanta GA. Hit me up on Facebook (Cameron McFarlin). we can schedule a time for you to drop the car off and get the work done
Sr all the way my brotha....Will the gtir itb manifold fit on that ve head?
No it will not, but you can make an adapter plate to make it fit. However you will probably lose power doing this because the ITBs are too small for a VE head and it will limit flow
@sr20tech82 true true, I did some research on it....hope you get that replacement sentra going soon....respect
Where did you find that front bumper? Who can guide me to one!
The front bumper was purchased from a sr20 forum member named Roman Lapin in Russia.
Is the vet intake manifold interchangeable with the p11 head, I'm sure it uses a larger throttle body 70mm and drive by wire, good for traction control in a fwd.
All the VVL intake manifolds are interchangeable.
any plans to put sr16ve cams in it?
We’ll see in the future
So the SE-R is just the two door version of the four door? Forgive me for the noob question lol I love cars, but ya I’m a novice ngl.
The SE-R received the SR20 engine from factory. 4 doors received a 1.6 ga16 motor
Very butifull make bro
nice build man. question .... who assembled the engine and was any custom/fab work needed for k series shifter ?
Engine assembled by me. The shifter is modified to work on a Nissan trans
Question Commander- how hard was it to retrofit the Morimoto projector lenses into the Tsuru headlight housings? Was this project difficult or can you recommend a tutorial or instructions? Love them! 😉🤙🏼
It’s not hard. I had actually made a video years ago on Facebook while doing it.
Bro .. that car is 🔥🔥 took me back to the old days .. love the engine set up ..
how hard would it be to do this to a 2003 protege ..
Not sure. Would have to figure out the wiring, mounts, and axles
sitting here thinking why I let my 92 se-r go. 🤔
I just got a 92 ser SR20DET
What ecu are you using? Thanks!
The car was on a nismotronic at the time
@@sr20tech82 did you switch to haltech ?
I switched to a Fueltech FT550
By any chance, do you have a obd2 to obd1 jumper? I'm running a 99 non rr into a 96 200sx with nistune, sr16ve pistons an gasket,20v headers,s4 cams. Was hoping you may have 1 or know someone with 1. Keep up the vids fam, mine wont be done for awhile like yourself.
No sir. Hit up Boost n co
Is there anyone out there that knows someone in the Atlanta area that is good with the B 13 if so reach out to me please. I have a 1993 and would like to get some engine work done.
I miss mine sadly it was a B14 but true shit they getting rare af dumb GA16DE hardly exists anymore
What series tires are those sir?
205/50/15
@@sr20tech82 do you roll your fenders?
@@juniorcuthbert611 no
Hey man am from.d caribbean I have a 93 sentra want to do sum upgrade on it but will like to get some ideas from you been following you and like what u do .
.....will love to hear back from u
What is your plan with the Sentra?
@@sr20tech82 right now it's cabureted but want ro do sum upgrades to get it a lil faster hopefully in time I want to get a sr20 in it
I don’t have much information on the carbureted models as they didn’t come to my country. But I would say this. A motor is just a big air pump. The more efficiently you can get air in and out of it the more HP you will make.
@@sr20tech82 ok ....I'll look into getting a sr20 soon
Wheel specs?
15x7 et41
Thanks man. Ride safe 🔰
Is 16inch too big?
Yo bro I also have the b13 gts model bro
i had a 1.6 ka motor 4 speed
The most suicidal fastest nissan😂
i have one for sale, 91, aztec red unmolested 2nd owner 175k org miles, hit me up
Sub
But need work
The Tsuru after 2000 its a real lame "car". All the chasis were made whit thiner metal, less suspension parts and interior are the worst part In my country until 99 were still decent.
爛
Impossible to get a 2 fog today
There’s one on Facebook right now for $750 it’s in Arizona
Yo bro you got Instagram?
IG: sr20s_rule