Great video Mr. Amderson! In my simple mind, the money I've spent on wood turning and associated supplies is repaid tenfold in smiles and compliments from all the people I give vases, bowls, candleholders, etc to. I don't sell anything. I give everything away, and what I get in return is priceless....thanks for all your videos and tutoring!
Good afternoon Phil. I just have to lead off by repeating a comment I made quite some time ago. What is wrong with the wood turning community? How can it be that you only have 63.5K subscribers? Your videos are hands down top 10. Maybe top 5? Maybe just plain top! Because the guy doing the video is you. Straightshooter. Not advertising anything. Truly wanting to "share" with the rest of us - beginners to advanced. It's just not possible to watch one of your videos without learning something "new". For people like me, sometimes I have to learn it 3 or 8 times but you are always there, always offering the finest kind of help. Now, about this video. WOW! One of a kind for sure. So good. So much information. And so well presented. Your candor and humility? Well, let's just say I wish I could claim similar skills. At 78 I may be a bit mature to use expressions like "You rock!" and "Right on!". Or as John Denver used to say quite a lot "Far Out". The greatest achievement any of us can hope for is that we changed someone else's life for the better. I wouldn't dare guess how many other lives you have change for the better as you have mine. THIS IS NOT A PAID ENDORSEMENT!!!!! 😀😀😀😀😀😀😀😀😀 Just a huge thank you for all you that you have helped me.
Well done, Phil! You did a great job covering the expenses of woodturning. It's an expensive hobby but, as Capt.John-op3bf said, the smiles that come from those on the receiving end of the pieces I give away makes it all worthwhile. And, like him, I rarely take any money for the pieces I turn. My son and oldest grandson are learning the craft. That's the greatest joy of all! Thanks!
Very well done video Phil. You covered everything. I am 65 , and have been a woodworker most of my life. A wood turner for about 19 years. It is definitely not a cheap hobby. But to me it is so relaxing and satisfying. Thanks for sharing and take care 😊.
Thank You Phil... All the if's, ands & but's of wood turning at home.. All good for folk's to know (& a whole lot more manageable/thrifty than a huge garage full of muscle car restorations)... Phil YOU are by far a wiser shopper than I am & this is good that you are sharing all your wisdom.... Until next time Phil...TM
Good summary Phil. I think we all are very fortunate that your shop is cold; if not, we would have missed out on all the wonderful turnings you've done over the years. Everyone's circumstances are different but your perspective is very helpful for anyone wanting to get started in this hobby and provides some excellent suggestions. I didn't get started turning until 3 years ago just after I retired, not because I retired but because we moved my parents in with us and my 95 year old Dad thought he wanted to get into turning, so we got a lathe. He tried, but it was too much for him so I wound up with a lathe and found out I really like it. Your videos were among those that I watched while getting started, so I'm very grateful for those videos -- they have been quite helpful. Even now, they are both enjoyable and inspirational. I'm doing some furniture work right now; I was asked to build some banner stands for our church and, while enjoyable, am ready to finish and get back to turning. I think I developed ADHD before I retired and find that furniture projects take way more time than I like -- turning provides really great results really quickly which seems to suit me better these days. Wow, sorry for the rambling on there; I just really enjoy your Thursday videos and want to let you know you really do make an impact on your viewers.
Fantastic video Phil. My 1st lathe was a small bench top Jet, bought on eBay from a Vicar, and I used it for 3 years. My brother bought me another bench top, a new Axminster and variable speed but on offer as it was ex display so no box, for my 60th Birthday and I still have it. I bought my big lathe nearly 5 years ago and it was on offer and came with a chuck as well. It cost me £1800 instead of £2500 so a good deal. I have never bought a new chisel all second hand and mostly from eBay. I now have 7 chuck again all eBay or from friends. Our hobby can get expensive but the pleasure of holding something in your hands that you have turned is PRICELSS. I agree with the costs of finishes being ridiculous at the moment and I can't work out why they have gone up so much in price. Hopefully a lot of people will get to see this video and use the information in it. Take care my friend. Cheers, Huw
Phil, About 14 years ago, I had a friend that had a nephews inheritance of a wood shop. His father had a stroke and his shop sat unused for 22 years. When he passed, all his wood working tools got sent to my friends house. The son was in the military and didn’t want it. He had two Shopsmiths and every tool they made 22 years earlier. A home made maple work bench. A 12” RAS, lots and lots of accessories, and lots of hand tools. I do my turning with a Shopsmith. Have made many bowls. I need to turn some like yours. Mine are glued up bowls. Thanks for sharing your story! Best wishes to you, Kevin
I started on a Shop smith and you can do a lot on one. Eventually I bought an old Crescent lathe and put a treadmill motor on it and it has performed amazingly.
Well done Phil! I have to say that I did pretty much the same thing when outfitting my shop. Lots of used equipment and tools that I could either repair or that were in good shape. That was before I started watching your videos. Great advice on finding wood to work with, whether at a tree trimmer, firewood pile, or scrap at a cabinet maker. Now I don’t think I have too much scrap wood in my shop! 😅
Thanks for taking the time to let potential wood turners know what to expect for either starting wood turning as a hobby or a business. I got stated by buying from an estate sale which included an old Craftsman tube (12x36 ) lathe, chuck, face plates, turning tools and a wall mount tool holder for about $200. Used it for about 3 years and re-sold the lathe and a few accessories for $75. So you can go cheap to get started. One of the best hobbies I've ever started.
Phil, thank you for the no nonsense video addressing the costs of woodturning. My wife and I are looking to upgrade our lathes with a full size lathe. I prefer Jet brand but also researching Laguna lathes in California. We’ve never owned a lathe that will turn at slow speeds (especially with out of balance pieces), or have reverse. We really enjoy your videos! Blessings to you!
Thanks, Jay! I was all set to get the Laguna 1836 but then this Jet lathe, just a few miles from me, came available and I jumped on it. I'm very happy with it. If you go with the Laguna, be sure to watch Gary's video on how to make a spindle lock for it. 😊
Phil, I just found out this morning that the headquarters of Powermatic, (who owns Jet), is located just about 30-45 minutes from me here in middle Tennessee. I’m going to search for the Jet 18-40 because of the warranty, but I do like the design of the Laguna 18-36. I really enjoyed your video yesterday about the costs of woodworking! Keep up the great work!
Thanks for keeping a candle in the window ! My lathe has sat quiet for over a year now. It’s time to get back on the horse . Thanks again for reminder that everyday counts !
Great video Phil, I think you covered the subject quite well. I started my journey with a homemade lathe. I used it for several years. Then in 2005 I bought a Jet 1442 with a reeves drive. December of 2022 I bought a Jet 1840 like yours and I love it. My oldest son has my 1442 and uses it regularly. He'll get my 1840 when I'm gone. It's wonderful to know he will carry my passion forward.
Thanks so much for the explanation on why I haven't made any profit on my artwork yet. So my lovely wife has been making it a reminder that I haven't made a profit yet for the last four years. She's well informed now by watching this video with me on what it takes to just make a few things, and that it takes years to get somewhere. But to me in more like therapy. Happy turning phill😊 keep on keeping on.
Thanks Phil. It is hard to tell people how much it costs. I am 67 and started turning two years ago with a 1997 Shopsmith. I learned a ton from watching your videos along with other TH-cam instructors. I recently was blessed to be able to purchase a new Record Power Herald. It is like cheating having all the features of good lathes especially the variable speed and reversing. I also work in an unheated garage in Illinois. Space heater is my winter friend ❤️ Thanks as always for your great videos.
Hi 👋, Phil, great content, letting people know what it is going to cost to set up for wood turning, and as you say, collected over many years as well, A month or so back,, offered a plastic box with a load of turning tools in, 25 in total made by crown and Robert Sobey, I asked how much they wanted. They said £25, I said are you quite sure and they said yes, take the whole lot £25, I couldn’t get my money out of my pocket quick enough, And at the same place I picked up a vintage Rubio workbench £50, and as we know over the years, setting up a workshop for joinery business, is a serious amount of money nowadays, Though it’s not like you’re going out and spending the money all in one lump sum, you just buy the machinery all the tools as you are doing your work, the last time I done a evaluation of my tools and equipment for insurance purposes, I’ve got somewhere between 70 and £80,000 worth of machinery, Sadly, I’ve had to sell some over the last few years, and lost a lot of money in the process, Keep up the great work, Phil,
Phil. Received your Shady Acers special from Super Grip. Great deal. 3 grits, several other samples of sand paper. Thanks from Wasaga Beach, Ontario, Canada
I have the same lathe I purchased 3 years ago I think after watching your video on buying yours. I got a great deal as did you and love it. I turn mainly free wood that I find or is given to me. Great informative video.
Thanks Phil this was very informative. I smiled when you said you have 3+ back up angle drills. My wife is like you she buys always in two or three. Need to have a back up so if you run out open the drawer and there you go your back in business 😃. I am a wood worker and have gathered tools for years. You have opened a new world of turning. Retirement is fast approaching and I want to try my hand at turning. So the tools of the trade you showed was helpful to me. Thanks for the show. Joel
Good afternoon, Phil. Excellent. In a few minutes you gave information to questions so many folks ask about this hobby. There are basic things needed, which you covered. From there, a turner can continue buying and buying if they choose. Above all, have fun and enjoy the process. Nicely done , Phil.
Love it, lots of valuable info shared here. My first lathe was a Craftsman 12x48 I paid $80 for out of a 'pidgeon swap', minus the faceplate it should have come with. Zero interest in spindle turning, it sat out in the weather for a couple years to the point I had to completely rebuild it and finally decided to buy a SuperNova2 chuck (and required adapter), then the fun began. I experimented a lot...I discovered 'this' design that I found out was called 'this', and discovered 'that' design that was called 'that', not having seen those styles of turning until after I made them myself. After getting some bowl gouges and a swan-neck, I had an idea as I fell asleep for a nap and ended up making a couple versions I still haven't seen some 5+ years later (one day, I hope to figure out making a video and sharing that idea). But on to some other points of your video...I "really" want a quality bandsaw, but for now a $60 plugin electric chainsaw does what I need (if considerably inconveniently). I still can't afford a slow speed grinder, so a white wheel on a regular grinder does the job. I also couldn't afford a Timberwolf (?) sharpening jig, so I downloaded a template and made one from scrap plywood (same with my kinetic sander)... I've always been a penny-pincher making whatever tool I needed when I could, so nothing negative at all meant for outright buying them, just pointing out it doesn't have to be "that" expensive but, otoh, I don't turn near as much as you do and I'm in absolute awe of what you bring out of the wood you work
Interesting journey! I was much the same for many years. I made a lot of my own tools and jigs, too. Now, I just want to get on with turning. Thanks for watching and the story! 😊
You managed to answer several of my questions without my having to ask… Thanks Phil Unfortunately I probably spent too much for my accessories and tools when I was getting started but they are high quality and will last longer than I will. I’ll make sure my son knows their value when he is managing an estate sale.
Cool, thanks, Bill! 😊 Yup, I'm always telling my family the value of my stuff. This is one estate sale I would love to attend, but, unfortunately, I won't be around! 😊
As a hobbyist for 6 years now, I'd be afraid to total up expenses. When friends visit my shop, someone invariably holds up (to them) some long pointy thing and asks, "Why do you have so many of these and how much does one cost?" I say with a smile, "They are all different, and cost probably too much." But whatever the cost, to me (as they say), "It's cheaper than a psychiatrist!"
The only thing you forgot was the coffee pot for the shop. Great info for anyone interested in turning also check out any clubs in your area. Stay safe be well Dennis
Really appreciate the information Phil. Especially the day to day stuff. I'll be sure to not let my wife watch this video as I embark on the journey. I just got my first lathe (waiting on the weather to cooperate with some warmth before it gets set up. It was a gift from a friend who's dad was a turner. I've been considering it for a few years now and have accumulated a few of the items I need. Fortunately, wood isn't a problem, as I've a yard with trees that drop a few times every year. You've been an inspiration and I hope to join you in the club before to long.
Phil. I’ve been following you since the beginning I’m a carpenter, retired just like you I owe you a great debt of gratitude pretty much she taught me how to turn some beautiful wood pieces. I enjoy watching you every week. I super enjoyed turning wood just like you, I would love to send you a piece of wood, I just don’t know your address I understand putting your address out there in a cool thing so I get it but keep doing what you’re doing. We all love seeing you do your thing and I appreciate the great commentary. You’re a true gentleman.
Thanks Phil...you gave me a couple new sources for supplies. Just realized before moving from PA to NM I used to live a stones throw away from Penn State Tools.
🙋♂️🏴 Hi Phil brilliant video for those thinking of taking up wood turning, so honest and informative. I'm so mean I'll stick to watching you at your lathe. Don't stop Phil !! please I just love it.
It looks like most of us,older, turners get more pleasure from the smiles than the wallets. I have never bought wood for turning and, like others, give everything away. I recently discovered how to make friction polish from shellac flakes and boiled linseed oil, although in Canada I have to use 99% isopropyl instead of denatured alcohol. This works great on small items such as trinket boxes. Look forward to the creations you make from the oddest pieces people send to you. Great video for beginners wanting to know costs of equipment
Thank you for this video. When I first started in wood turning, I thought I needed the latest and greatest, but soon realized the used things were just as good. And I saved a lot of money on some great deals. I hope a lot of newbies will watch this video. I am going to share it. Thank you for your wisdom. I wish I had seen some of your videos earlier in my endeavors.
I got a great deal at a Woodcraft tool days event a couple years ago. They were running a special on Powermatic at 20% off. Because I bought it during their event and the Powermatic rep was there, Powermatic chopped another 20% off the sale price. I had 3-4 weeks without a lathe waiting on shipping because I'd sold my previous lathe to buy it. But, so worth the wait.
Wonderful, in depth list of the tooling required to have a successful lifetime hobby. I wish I had started it when I was a lot younger. Still enjoy hearing your words of wisdom.
Great video Phil! I have only been turning for about 6 years and started with a cheap Harbor Freight lathe that has lasted me until last summer when the motor finally burnt up. I have missed it so much I finally just ordered a new Laguna 18/36. Most everything I have ever made on the lathe has been gifted. I have sold a few things, but find it difficult to get buyers that will pay anything for something hand made in my area and I don't do videos. I also donate projects to the local American Legion I am a member of for them to auction. Always appreciate your work and videos. They are great learning tools for me.
That was really interesting, Phil. Apart from a pillar drill which I bought at a ridiculous price from an Axminster store closing sale, and wood offcuts and logs which I get for next to nothing, I’ve bought mostly everything new, including Robert Sorby gouges and sharpening system. Still, it’s a hobby and I’ve learned so much in the last few years from people like yourself and Gary. Keep keeping up the good work 🌞
Thank you, Sir! You are an incredible human, Phil. You are sharing valuable knowledge and the true value of your experience is challenging to quantify.
Great job Phil it is not cheap to do any type of wood work any more and certainly not cheap to be a Turner but it challenge's me and it is fun Blessings see you on Thursday same place here on Utube
Phil that was a great explanation on what it cost to be equipped for wood turning. Both old prices and the new prices were very interesting to hear. Based on the fact I am an old guy I shop in a thrifty manner myself. I had the old belt drive lathe(garage sale) newer reeves drive(garage sale) then a brand new one that I have had now for 6 years. Funny thing I have the same Rikon bandsaw like yours but a few years older. Garage sale for $300.00. So you pointing out where to find deals will be very helpful for others. Oh and I think you know I have the same drill press. Got mine 50 years ago new at Sears, But got a deal because someone bought it and returned it without using so I got a deal on it. Man the cost of finish is crazy. And I ran out of the Zinsser Seal Coat today...ouch. I bought a gallon the last time I got some and it was about the same price as the quart today. Guess I will stick with quarts now or I may have to take out a loan LOL. This was a fun video to watch. Take care my friend, Gary
Interesting stories, Gary! I love getting good deals at yard sales! For awhile I was in the "buy used tools, fix up and re-sell" business. That was a lot of fun, too! I just hope everyone understands how long we've spent accumulating these tools. No one should expect to go out and get them all at once. Thanks, buddy! 😊
Phil that was a super fun video. I to am a woodohalic . Now I have to move it all again to a new house . I looked for a long time for an old cast iron lathe . The prices were higher then a good brand new lathe .
True enough, Steve and those older lathes, although beautifully built to last a lifetime just can't hold a candle to newer lathes with all the new technology. 😊
Glad you mentioned the difference in American width for a gouge vs the British convention. I'm used to it being a UK viewer but it would catch out a newbie.
Thanks so much for a very informative video. One thing you have that I don't is space! All my woodworking is done in my condo garage. After retiring my wife and I downsized considerably, but I still have some power tools, hand tools and a power miter saw. My workspace is a workbench made from a couple used shelving units that are just the right height for me. My wood supply is leftovers from remodeling the place and I haven't needed to buy any more yet after 10 years. I like your approach to finding deals on the expensive stuff and I DO love yard sales and flea markets!
Great review Phil! Used is the way to go. I’ve sold old lathes for what I bought them for. So much is personal preference. I bought 1 set of gouges. Then gave it away with an old lathe. Just get what you need and if it works for stay with it. It is a great, relaxing, enjoyable hobby. Very satisfying.
Thank you for all of the information, Phil. I saved the video for future reference. You definitely answered my question from last week, and then some. Thanks again 👍🪵
Great video Phil! I started turning years ago with a Jet mini lathe. I believe it came with a Barracuda chuck and some BB tools-can't remember. I live in a small town pop about 230 and if I hear a chain saw I will go over and investigate. All of my wood comes to me in log form and I don't buy any of it so to your list I would have to add a chainsaw. Gotta love a chainsaw-I do anyhow. I now have enough Black Walnut to last for the rest of my life along with Mulberry and Cherry. Another thing that no one really needs but now that I have one I find indispensable is a vacuum system. I put one together very cheaply. Another great video Phil and I can see that you are way mor organized than I am
Phil, thanks for the video. You provided lots of good info. I use to have one of those Craftsman lathe's and the duplicator and made spindles for a banister on our porch. That was 30 years ago and some are still in use. The lathe is long gone but I wish I still had it.
Awesome, Phil. I actually bought my lathe new. It's a Jet 1224vs with a bed extension. My gouges are Hurricane. They weren't too bad in price. My grinder is a Harbor Freight Hercules. It works great. Right now I just have aluminum oxide wheels. They work good, just have to keep them dressed. What a great informative video, my friend. Have a fantastic weekend.
Looking carefully at the Hercules chisels I have seen online, I believe they are identical to the Benjamin's Best, Jane. You've got a great lathe, there! 😊
Superb video! You are a wise and thrifty man. Thanks for sharing your knowledge so generously. Your shop is awesome. It was very endearing to journey through a lifetime of your experiences and work. Thank you!
Very good video Phil and a very good one for a starting out wood turner! I enjoyed the video a lot and it is similar to how I started about 15 years ago! Our prices here in Canada are higher so our expenses are higher but still a fun hobby although I also do a lot of work on a scroll saw too! Thanks for another good one! Cheers Al
Great video. Thanks for sharing. It has been most helpful. I also enjoyed seeing your shop from a different point of view and especially some of the “hidden” places ( tool storage areas, drawers etc.).
So true every thing you touched on in this video. As a new turner I went 7 different lathes before I got to number 8 and 9 that I settled on. Had a Rockwell, couple of harbor freight,a nova and a couple of jets. I finally settled in with the Laguna. And I have two a Revo 12/16 and a 15/24. I think I am done I hope. All used and off marketplace except for the last one that I got new but on sale. This all took place over five years. Got a pretty good collection of accessories and nova chucks that way. Tools are not cheap and you got to have some sandpaper. At least wood is the right price. Just got to stay on the look out. And then figure out where to store it. Got a load on my trailer now that’s been there a week with no place to stack it in the dry😊. Great video Phil. Dan
Brilliant video. I wonder how many of us have worked out how much we've spent on our hobby. (Don't tell my wife 😂). But as others have said, it's about the gratitude we receive from the recipients. And for those of us that sell at craft fairs, the compliments from the market goers who stop by. Our craft inspires an emotional response and memories in others. (I've met so many people who have had woodturners in the family) We are here to assist the wood to be turned into functional pieces of art, showing as much of the natural beauty of the wood and its tactile nature as possible!
Just a couple of tips I'd like to pass along...for those in wheelchairs or those who need or prefer to sit and turn...they actually make sit down lathes. Another great tip" I was watching a wood turning video (Sandy's Vintage Workshop or something) and they use a shop vac to clean their wood turning area and then use a shop vac to clean the floors. If you have ever seen The Wood Whirler videos...he uses nothing but Min Wax Sanding Sealer and his items are pretty nice. I think Min Wax is a gallon for maybe $30.00. He also swears by Acks...which is around $28.00 for I don't know how long.
Im a beginner turner who predominantly turns sitting down due to back issues. Here in Australia there is only one brand and model of sit-down/angled lathe and they're stupid expensive... At the moment I'm working on seating position/lathe height to get me where I need to be. Far more cost effective and teaches you alot more about the process.
@@franknicastri9201yeah, put 'wheelchair' in the equation and things go way up. Are they available used? I'd put an ad in the paper...maybe someone had one because they got hurt and now they can stand....
Great video Phil! I look forward to your weekly videos, as I have only been a wood turner for a little over two years. I picked up alot from your posts and wanted to thank you! Also, with all that wood worker wood, you should try some segmented turning. I thought is was going to be too difficult, but once you have a good sled to cut segments on, it's a ton of fun. Thanks again Phil....
Very helpful indeed! Always good to know best/affordable tools and supplies! I need to get me cbn wheels for my grinder and a couple of sand-o-flex! Thanks Phil!
Well that was different. Yes things have changed. They are not the way they use to be. The dollar doesn't stretch as far as it use too. Happiness isn't cheap. Thank you for sharing. See you next week
Great video. Combination cost and shop tour. I appreciate your support of buying used at sales. Robert Sorby is to woodturning what Eddie Bauer is to well many things. Added cost! But it's good you talk costs and expenses. Nice, too, because so many folks don't talk about cost to us amateurs. I struggle with an HF lathe but have spent money on good chucks and tools and sharpening. I'm also getting by with one (!) Sand o flex. I counted 7 there😂. Anyway awesome video. You continue to inspire and educate. Thank you so much.
Haha, well, like I said, Steve, I've been at this a long time. I bought my first SOF from the hardware store I worked at 50 years ago. The rest came cheap on eBay. I just couldn't resist buying them over the years. Couple from yard sales, too. 😊
Personally , I try not to think of the expense . I too , am retired and its my favorite past time . I don't have half the equipment you do but I make do . Thanks for sharing this video . Quite informative .
Howdy Phil. Once again, informative as always. For $ 2200.00 I got my 2nd lathe from a guy who apparently believed in new and lots of. It's a Jet 1440VS but only runs in a forward direction. He also threw in ALL of his tools, a mix of Benjamin's Best & Robert Sorby. A Rikon grinder with a 180 CBN wheel that he discolored with something. Looked like the red stain from a tool handle. It cleaned up nicely with WD-40 & a steel brush. Also a hand made 9" sanding station that is actually very well made. A One Way sharpening system that is mis-aligned in the jig set up, ( fixing that now) a couple of Vic-Marc chucks and jaw inserts, and two well built cabinets that fit under the lathe bed like yours do but are open faced with one holding the lathe tools which looks nice but is dangerously close to where I stand and not user friendly when grabbing a fresh tool or replacing the previous tool and needs re-designing. I've been bitten a couple times now. The lathe is only 3 years old and worth more than the cost. Yes, sweet deals can be found if you keep your eyes open and are patient. Take care and keep turning. Bill Riley
excellent video. I wish there had been something similar when I decided to try woodturning. I, like you, woodworker for over 38 yrs. When I was getting close to retirement, Isaw a Rikon midilathe on sale at woodcrafter and I bought it. It sat in my garage/shop for 6-9 months unused ( I had a few projects I needed to complete before I could try and find room for a lathe setup. Once I set it up and used it, I was hooked. I've been turning now for about 6 yrs. During that time I have spent a considerable amount of cash and tools and supplies. The total cost far outweighs the cost of the lathe. I do sell some of my work. It helps me pay for more wood. As my skills improve, ,I prefer turning different species pf wood. I live in Florida, so hardwoods can be challenging to find, but they are available if you travel around the state. But when I consider the cost of it all, for me, it was a great investment. I have get great pleasure putting a piece of wood on the lathe and seeing what is inside of it. It gives me great joy and purpose in my retirement.
I go to Estate sales every week and I often find wood along with a few tools. I have found gouges at Peddler fairs and sometimes you can haggle a real deal.
Thanks phil for a great presentation, wood turning can be expensive but like you I love a good bargain, we have what they call Garage sales here in Australia and you can really pick up some cheap ( but good quality) items, just about all my wood is FOG wood and I have a few friends that live on old disused chicken farms and the is always a tree that has been blown over so I’m straight over there with the chainsaw. Anyhow thanks for sharing. All the best to you. Regards Jim
You are correct about variation in prices. I am in Canada, so add roughly 35% to the cost. We struggle getting some of the stuff you people in the States have access to. Shipping has skyrocketed as well. People look at the lathe, but tooling, sharpening system, chucks, etc can add up to far more than a lathe.
Great video, Phil. I'm like you, in both philosophy and age! Most of my stuff is over 25 years old and I would cringe if I had to buy it again new! Fortunately I've been doing craft shows for about the same time so most of my equipment was purchased from those proceeds.
Out of every expense in my little shop wood and sandpaper probably is the most money spent equal to all the equipment! so true on the chucks I ended up with 3 for the same reason
Great video Mr. Amderson! In my simple mind, the money I've spent on wood turning and associated supplies is repaid tenfold in smiles and compliments from all the people I give vases, bowls, candleholders, etc to. I don't sell anything. I give everything away, and what I get in return is priceless....thanks for all your videos and tutoring!
There ya go, Cap! 😊
Yes, I give away most of my stuff. We ran out of room on the side board LOL.
Good afternoon Phil. I just have to lead off by repeating a comment I made quite some time ago. What is wrong with the wood turning community? How can it be that you only have 63.5K subscribers? Your videos are hands down top 10. Maybe top 5? Maybe just plain top! Because the guy doing the video is you. Straightshooter. Not advertising anything. Truly wanting to "share" with the rest of us - beginners to advanced. It's just not possible to watch one of your videos without learning something "new". For people like me, sometimes I have to learn it 3 or 8 times but you are always there, always offering the finest kind of help.
Now, about this video. WOW! One of a kind for sure. So good. So much information. And so well presented. Your candor and humility? Well, let's just say I wish I could claim similar skills.
At 78 I may be a bit mature to use expressions like "You rock!" and "Right on!". Or as John Denver used to say quite a lot "Far Out". The greatest achievement any of us can hope for is that we changed someone else's life for the better. I wouldn't dare guess how many other lives you have change for the better as you have mine.
THIS IS NOT A PAID ENDORSEMENT!!!!! 😀😀😀😀😀😀😀😀😀
Just a huge thank you for all you that you have helped me.
Wow, thank you, Tom for your very generous and kind comment! 😊 I'm really glad you spend time with me!
Well done, Phil! You did a great job covering the expenses of woodturning. It's an expensive hobby but, as Capt.John-op3bf said, the smiles that come from those on the receiving end of the pieces I give away makes it all worthwhile. And, like him, I rarely take any money for the pieces I turn. My son and oldest grandson are learning the craft. That's the greatest joy of all! Thanks!
That is a great joy, Greg! 😊
Very well done video Phil. You covered everything. I am 65 , and have been a woodworker most of my life. A wood turner for about 19 years. It is definitely not a cheap hobby. But to me it is so relaxing and satisfying. Thanks for sharing and take care 😊.
This is all true, Scott! 😊
Thank You Phil... All the if's, ands & but's of wood turning at home.. All good for folk's to know (& a whole lot more manageable/thrifty than a huge garage full of muscle car restorations)... Phil YOU are by far a wiser shopper than I am & this is good that you are sharing all your wisdom.... Until next time Phil...TM
I can stretch a buck for sure, Tuffy! 😊
@PhilAndersonShadyAcresWoodshop
Great to have a buck stretcher and a wood stretcher, 😂
Good summary Phil. I think we all are very fortunate that your shop is cold; if not, we would have missed out on all the wonderful turnings you've done over the years. Everyone's circumstances are different but your perspective is very helpful for anyone wanting to get started in this hobby and provides some excellent suggestions. I didn't get started turning until 3 years ago just after I retired, not because I retired but because we moved my parents in with us and my 95 year old Dad thought he wanted to get into turning, so we got a lathe. He tried, but it was too much for him so I wound up with a lathe and found out I really like it. Your videos were among those that I watched while getting started, so I'm very grateful for those videos -- they have been quite helpful. Even now, they are both enjoyable and inspirational. I'm doing some furniture work right now; I was asked to build some banner stands for our church and, while enjoyable, am ready to finish and get back to turning. I think I developed ADHD before I retired and find that furniture projects take way more time than I like -- turning provides really great results really quickly which seems to suit me better these days. Wow, sorry for the rambling on there; I just really enjoy your Thursday videos and want to let you know you really do make an impact on your viewers.
Thank you so much, Mark! I'm loving turning but really miss flat work sometimes. I just can't make the room for both. 😊
Fantastic video Phil.
My 1st lathe was a small bench top Jet, bought on eBay from a Vicar, and I used it for 3 years.
My brother bought me another bench top, a new Axminster and variable speed but on offer as it was ex display so no box, for my 60th Birthday and I still have it.
I bought my big lathe nearly 5 years ago and it was on offer and came with a chuck as well. It cost me £1800 instead of £2500 so a good deal.
I have never bought a new chisel all second hand and mostly from eBay.
I now have 7 chuck again all eBay or from friends.
Our hobby can get expensive but the pleasure of holding something in your hands that you have turned is PRICELSS.
I agree with the costs of finishes being ridiculous at the moment and I can't work out why they have gone up so much in price.
Hopefully a lot of people will get to see this video and use the information in it.
Take care my friend.
Cheers, Huw
Interesting stories, Huw, thank you! 😊
Phil, About 14 years ago, I had a friend that had a nephews inheritance of a wood shop. His father had a stroke and his shop sat unused for 22 years. When he passed, all his wood working tools got sent to my friends house. The son was in the military and didn’t want it. He had two Shopsmiths and every tool they made 22 years earlier. A home made maple work bench. A 12” RAS, lots and lots of accessories, and lots of hand tools. I do my turning with a Shopsmith. Have made many bowls. I need to turn some like yours. Mine are glued up bowls.
Thanks for sharing your story! Best wishes to you, Kevin
Interesting story, Kevin, thank you! 😊
I started on a Shop smith and you can do a lot on one. Eventually I bought an old Crescent lathe and put a treadmill motor on it and it has performed amazingly.
Well done Phil! I have to say that I did pretty much the same thing when outfitting my shop. Lots of used equipment and tools that I could either repair or that were in good shape. That was before I started watching your videos. Great advice on finding wood to work with, whether at a tree trimmer, firewood pile, or scrap at a cabinet maker. Now I don’t think I have too much scrap wood in my shop! 😅
Thank you! 😊
Thanks for taking the time to let potential wood turners know what to expect for either starting wood turning as a hobby or a business. I got stated by buying from an estate sale which included an old Craftsman tube (12x36 ) lathe, chuck, face plates, turning tools and a wall mount tool holder for about $200. Used it for about 3 years and re-sold the lathe and a few accessories for $75. So you can go cheap to get started.
One of the best hobbies I've ever started.
Absolutely, Bob! 😊
Phil, thank you for the no nonsense video addressing the costs of woodturning. My wife and I are looking to upgrade our lathes with a full size lathe. I prefer Jet brand but also researching Laguna lathes in California. We’ve never owned a lathe that will turn at slow speeds (especially with out of balance pieces), or have reverse. We really enjoy your videos! Blessings to you!
Thanks, Jay! I was all set to get the Laguna 1836 but then this Jet lathe, just a few miles from me, came available and I jumped on it. I'm very happy with it. If you go with the Laguna, be sure to watch Gary's video on how to make a spindle lock for it. 😊
Phil, I just found out this morning that the headquarters of Powermatic, (who owns Jet), is located just about 30-45 minutes from me here in middle Tennessee. I’m going to search for the Jet 18-40 because of the warranty, but I do like the design of the Laguna 18-36. I really enjoyed your video yesterday about the costs of woodworking! Keep up the great work!
Thanks Phil! Retired woodworker & deputy sheriff for 40 yrs -- turned wood turner yeats ago. Your video os very true and informative. Thanks again
Fantastic! Thanks, Joseph! 😊
Thanks for keeping a candle in the window ! My lathe has sat quiet for over a year now. It’s time to get back on the horse . Thanks again for reminder that everyday counts !
You bet! Yeah, you are right. I would hate to be laying on my death bed wishing I had done more turning or whatever it might be! 😊
Great video Phil, I think you covered the subject quite well. I started my journey with a homemade lathe. I used it for several years. Then in 2005 I bought a
Jet 1442 with a reeves drive. December of 2022 I bought a Jet 1840 like yours and I love it. My oldest son has my 1442 and uses it regularly. He'll get my
1840 when I'm gone. It's wonderful to know he will carry my passion forward.
Perfect, Gerald! 😊
Thanks so much for the explanation on why I haven't made any profit on my artwork yet. So my lovely wife has been making it a reminder that I haven't made a profit yet for the last four years. She's well informed now by watching this video with me on what it takes to just make a few things, and that it takes years to get somewhere. But to me in more like therapy. Happy turning phill😊 keep on keeping on.
Yes, therapy and worth every penny, Edward! 😊
Thanks Phil. It is hard to tell people how much it costs. I am 67 and started turning two years ago with a 1997 Shopsmith. I learned a ton from watching your videos along with other TH-cam instructors. I recently was blessed to be able to purchase a new Record Power Herald. It is like cheating having all the features of good lathes especially the variable speed and reversing. I also work in an unheated garage in Illinois. Space heater is my winter friend ❤️ Thanks as always for your great videos.
Thank you, Jim! 😊
Hi 👋, Phil, great content, letting people know what it is going to cost to set up for wood turning, and as you say, collected over many years as well, A month or so back,, offered a plastic box with a load of turning tools in, 25 in total made by crown and Robert Sobey, I asked how much they wanted. They said £25, I said are you quite sure and they said yes, take the whole lot £25, I couldn’t get my money out of my pocket quick enough, And at the same place I picked up a vintage Rubio workbench £50, and as we know over the years, setting up a workshop for joinery business, is a serious amount of money nowadays, Though it’s not like you’re going out and spending the money all in one lump sum, you just buy the machinery all the tools as you are doing your work, the last time I done a evaluation of my tools and equipment for insurance purposes, I’ve got somewhere between 70 and £80,000 worth of machinery, Sadly, I’ve had to sell some over the last few years, and lost a lot of money in the process, Keep up the great work, Phil,
Thank you! 😊
I know I’m late getting to this one, but wow, what a great source of info for someone like me looking to get into wood turning. Thanks, Phil! Truly!
Glad it was helpful, Ryan, thanks for watching! 😀
Phil. Received your Shady Acers special from Super Grip. Great deal. 3 grits, several other samples of sand paper.
Thanks from Wasaga Beach, Ontario, Canada
Awesome, thank you! 😊
I have the same lathe I purchased 3 years ago I think after watching your video on buying yours. I got a great deal as did you and love it. I turn mainly free wood that I find or is given to me. Great informative video.
Thanks, Ronald! 😊
You left out a dust collection system. Long time viewer, look forward to your Thursday videos each week. Keep them coming!
I've shown it in a couple other videos, Tom. It's the deluxe two piece version. A dust pan (collector) and a whisk broom (remote control). 😊
Thanks Phil this was very informative. I smiled when you said you have 3+ back up angle drills. My wife is like you she buys always in two or three. Need to have a back up so if you run out open the drawer and there you go your back in business 😃. I am a wood worker and have gathered tools for years. You have opened a new world of turning. Retirement is fast approaching and I want to try my hand at turning. So the tools of the trade you showed was helpful to me.
Thanks for the show.
Joel
Excellent, Joel! My wife was the same way! 😊
Good afternoon, Phil.
Excellent. In a few minutes you gave information to questions so many folks ask about this hobby. There are basic things needed, which you covered. From there, a turner can continue buying and buying if they choose. Above all, have fun and enjoy the process.
Nicely done , Phil.
Glad you enjoyed it, Ray, thank you! 😊
Love it, lots of valuable info shared here. My first lathe was a Craftsman 12x48 I paid $80 for out of a 'pidgeon swap', minus the faceplate it should have come with. Zero interest in spindle turning, it sat out in the weather for a couple years to the point I had to completely rebuild it and finally decided to buy a SuperNova2 chuck (and required adapter), then the fun began. I experimented a lot...I discovered 'this' design that I found out was called 'this', and discovered 'that' design that was called 'that', not having seen those styles of turning until after I made them myself. After getting some bowl gouges and a swan-neck, I had an idea as I fell asleep for a nap and ended up making a couple versions I still haven't seen some 5+ years later (one day, I hope to figure out making a video and sharing that idea). But on to some other points of your video...I "really" want a quality bandsaw, but for now a $60 plugin electric chainsaw does what I need (if considerably inconveniently). I still can't afford a slow speed grinder, so a white wheel on a regular grinder does the job. I also couldn't afford a Timberwolf (?) sharpening jig, so I downloaded a template and made one from scrap plywood (same with my kinetic sander)... I've always been a penny-pincher making whatever tool I needed when I could, so nothing negative at all meant for outright buying them, just pointing out it doesn't have to be "that" expensive but, otoh, I don't turn near as much as you do and I'm in absolute awe of what you bring out of the wood you work
Interesting journey! I was much the same for many years. I made a lot of my own tools and jigs, too. Now, I just want to get on with turning. Thanks for watching and the story! 😊
You managed to answer several of my questions without my having to ask…
Thanks Phil
Unfortunately I probably spent too much for my accessories and tools when I was getting started but they are high quality and will last longer than I will. I’ll make sure my son knows their value when he is managing an estate sale.
Cool, thanks, Bill! 😊 Yup, I'm always telling my family the value of my stuff. This is one estate sale I would love to attend, but, unfortunately, I won't be around! 😊
HI PHIL SUPER Super good video.
Glad you enjoyed it, Manjit, thanks! 😊
Thanks for sharing all those details! (Especially the M2 steel information, large savings for the SAME TOOLS!)
Glad it was helpful! 😊
As a hobbyist for 6 years now, I'd be afraid to total up expenses. When friends visit my shop, someone invariably holds up (to them) some long pointy thing and asks, "Why do you have so many of these and how much does one cost?" I say with a smile, "They are all different, and cost probably too much." But whatever the cost, to me (as they say), "It's cheaper than a psychiatrist!"
😊
Nailed it again Phil? thanks for all the great info.
Thanks for watching, Jon! 😊
The only thing you forgot was the coffee pot for the shop. Great info for anyone interested in turning also check out any clubs in your area.
Stay safe be well
Dennis
I keep the coffee pot in the house, upstairs. It's the only exercise I get, Dennis! 😊
Really appreciate the information Phil. Especially the day to day stuff. I'll be sure to not let my wife watch this video as I embark on the journey. I just got my first lathe (waiting on the weather to cooperate with some warmth before it gets set up. It was a gift from a friend who's dad was a turner. I've been considering it for a few years now and have accumulated a few of the items I need. Fortunately, wood isn't a problem, as I've a yard with trees that drop a few times every year. You've been an inspiration and I hope to join you in the club before to long.
Sounds like you are pretty much set, David. Enjoy! 😊
Phil. I’ve been following you since the beginning I’m a carpenter, retired just like you I owe you a great debt of gratitude pretty much she taught me how to turn some beautiful wood pieces. I enjoy watching you every week. I super enjoyed turning wood just like you, I would love to send you a piece of wood, I just don’t know your address I understand putting your address out there in a cool thing so I get it but keep doing what you’re doing. We all love seeing you do your thing and I appreciate the great commentary. You’re a true gentleman.
Wow, thank you kindly! 😊
Good video
Glad you enjoyed it, Bobby! 😀
Thanks Phil...you gave me a couple new sources for supplies. Just realized before moving from PA to NM I used to live a stones throw away from Penn State Tools.
Cool, thanks! 😊
Very nice, Like you I have been collecting tools my entire life. A very good video thanks
Cool, thanks for watching, David! 😊
🙋♂️🏴 Hi Phil brilliant video for those thinking of taking up wood turning, so honest and informative. I'm so mean I'll stick to watching you at your lathe. Don't stop Phil !! please I just love it.
Thanks, John! 😊
It looks like most of us,older, turners get more pleasure from the smiles than the wallets. I have never bought wood for turning and, like others, give everything away. I recently discovered how to make friction polish from shellac flakes and boiled linseed oil, although in Canada I have to use 99% isopropyl instead of denatured alcohol. This works great on small items such as trinket boxes. Look forward to the creations you make from the oddest pieces people send to you. Great video for beginners wanting to know costs of equipment
Thanks, Ronald! 😊
Thank you for this video. When I first started in wood turning, I thought I needed the latest and greatest, but soon realized the used things were just as good. And I saved a lot of money on some great deals. I hope a lot of newbies will watch this video. I am going to share it. Thank you for your wisdom. I wish I had seen some of your videos earlier in my endeavors.
Good for you, Fred. Thank you! 😊
I got a great deal at a Woodcraft tool days event a couple years ago. They were running a special on Powermatic at 20% off. Because I bought it during their event and the Powermatic rep was there, Powermatic chopped another 20% off the sale price. I had 3-4 weeks without a lathe waiting on shipping because I'd sold my previous lathe to buy it. But, so worth the wait.
Great deal! 😊
Wonderful, in depth list of the tooling required to have a successful lifetime hobby. I wish I had started it when I was a lot younger. Still enjoy hearing your words of wisdom.
Glad it was helpful! 😊
Great video Phil! I have only been turning for about 6 years and started with a cheap Harbor Freight lathe that has lasted me until last summer when the motor finally burnt up. I have missed it so much I finally just ordered a new Laguna 18/36. Most everything I have ever made on the lathe has been gifted. I have sold a few things, but find it difficult to get buyers that will pay anything for something hand made in my area and I don't do videos. I also donate projects to the local American Legion I am a member of for them to auction. Always appreciate your work and videos. They are great learning tools for me.
Thanks for your great comment, Bryan! 😊
Great information Phil.
Glad it was helpful, Larry! 😊
Hi Phil. Thanks for the shop tour and sharing great sources for supplies. Informative as always.
Haha, well, you really have to want to see it, but, yeah, it's there, mostly. Oh well, can't take it out now without loosing 10k views.
you always do a good job Phil my wife always says you have to many tools etc and I tell her when I need something I have it lol
Exactly! 😊
Great video Phil. Very informative
Glad you enjoyed it, thank you for watching! 😊
Great video! Thanks for the tour of your work shop.
You are welcome, thanks for watching! 😊
That was really interesting, Phil. Apart from a pillar drill which I bought at a ridiculous price from an Axminster store closing sale, and wood offcuts and logs which I get for next to nothing, I’ve bought mostly everything new, including Robert Sorby gouges and sharpening system. Still, it’s a hobby and I’ve learned so much in the last few years from people like yourself and Gary. Keep keeping up the good work 🌞
Thanks a lot, Ray! 😊
Thank you, Sir! You are an incredible human, Phil. You are sharing valuable knowledge and the true value of your experience is challenging to quantify.
Wow, thank you! 😊
Very well done very interesting nice to see how and what someone else has thanks
Glad you enjoyed it, Daniel, thank you! 😊
Great job Phil it is not cheap to do any type of wood work any more and certainly not cheap to be a Turner but it challenge's me and it is fun Blessings see you on Thursday same place here on Utube
Right on, thanks! 😊
Phil that was a great explanation on what it cost to be equipped for wood turning. Both old prices and the new prices were very interesting to hear.
Based on the fact I am an old guy I shop in a thrifty manner myself. I had the old belt drive lathe(garage sale) newer reeves drive(garage sale) then a brand new one that I have had now for 6 years.
Funny thing I have the same Rikon bandsaw like yours but a few years older. Garage sale for $300.00. So you pointing out where to find deals will be very helpful for others.
Oh and I think you know I have the same drill press. Got mine 50 years ago new at Sears, But got a deal because someone bought it and returned it without using so I got a deal on it.
Man the cost of finish is crazy. And I ran out of the Zinsser Seal Coat today...ouch. I bought a gallon the last time I got some and it was about the same price as the quart today.
Guess I will stick with quarts now or I may have to take out a loan LOL.
This was a fun video to watch.
Take care my friend,
Gary
Interesting stories, Gary! I love getting good deals at yard sales! For awhile I was in the "buy used tools, fix up and re-sell" business. That was a lot of fun, too! I just hope everyone understands how long we've spent accumulating these tools. No one should expect to go out and get them all at once. Thanks, buddy! 😊
Phil that was a super fun video. I to am a woodohalic . Now I have to move it all again to a new house . I looked for a long time for an old cast iron lathe . The prices were higher then a good brand new lathe .
True enough, Steve and those older lathes, although beautifully built to last a lifetime just can't hold a candle to newer lathes with all the new technology. 😊
Thanks for the tour! There is always good deals around if you keep your eyes open.
Very true! 😊
Glad you mentioned the difference in American width for a gouge vs the British convention. I'm used to it being a UK viewer but it would catch out a newbie.
😊
Thanks so much for a very informative video. One thing you have that I don't is space! All my woodworking is done in my condo garage. After retiring my wife and I downsized considerably, but I still have some power tools, hand tools and a power miter saw. My workspace is a workbench made from a couple used shelving units that are just the right height for me. My wood supply is leftovers from remodeling the place and I haven't needed to buy any more yet after 10 years. I like your approach to finding deals on the expensive stuff and I DO love yard sales and flea markets!
Excellent, thanks, Tom! 😊
This is a great video Phil. It will surely be helping new wood turners for years and years to come.
Thank you, Marjie! 😊
Great review Phil! Used is the way to go. I’ve sold old lathes for what I bought them for. So much is personal preference. I bought 1 set of gouges. Then gave it away with an old lathe. Just get what you need and if it works for stay with it. It is a great, relaxing, enjoyable hobby. Very satisfying.
Well said! 😊
Great job Phil! Thanks for all the info. Take care.
Thanks, you too! 😊
Well done Phil. Well done is better than well said & you did both! Thank you very much!
Thank you kindly, John! 😊
Thank you for all of the information, Phil. I saved the video for future reference.
You definitely answered my question from last week, and then some.
Thanks again 👍🪵
Great, good to know, thanks, Dave! 😊
Really enjoyed the video. Poking about the shop, seeing your environment. Very cool, thank you!
Thank you, Laura! 😊
Great video Phil! I started turning years ago with a Jet mini lathe. I believe it came with a Barracuda chuck and some BB tools-can't remember. I live in a small town pop about 230 and if I hear a chain saw I will go over and investigate. All of my wood comes to me in log form and I don't buy any of it so to your list I would have to add a chainsaw. Gotta love a chainsaw-I do anyhow. I now have enough Black Walnut to last for the rest of my life along with Mulberry and Cherry. Another thing that no one really needs but now that I have one I find indispensable is a vacuum system. I put one together very cheaply. Another great video Phil and I can see that you are way mor organized than I am
Thank you, David! 😊
Very informative
Glad you think so, Maurine, thank you! 😊
Phil, thanks for the video. You provided lots of good info. I use to have one of those Craftsman lathe's and the duplicator and made spindles for a banister on our porch. That was 30 years ago and some are still in use. The lathe is long gone but I wish I still had it.
They were pretty good lathes! 😊
Awesome, Phil. I actually bought my lathe new. It's a Jet 1224vs with a bed extension. My gouges are Hurricane. They weren't too bad in price. My grinder is a Harbor Freight Hercules. It works great. Right now I just have aluminum oxide wheels. They work good, just have to keep them dressed. What a great informative video, my friend. Have a fantastic weekend.
Looking carefully at the Hercules chisels I have seen online, I believe they are identical to the Benjamin's Best, Jane. You've got a great lathe, there! 😊
Wow!! Great shop....
Thanks, Gary! 😊 Pretty dusty!
Superb video! You are a wise and thrifty man. Thanks for sharing your knowledge so generously. Your shop is awesome. It was very endearing to journey through a lifetime of your experiences and work. Thank you!
Thank you, Susanne! 😊
Very good video Phil and a very good one for a starting out wood turner! I enjoyed the video a lot and it is similar to how I started about 15 years ago! Our prices here in Canada are higher so our expenses are higher but still a fun hobby although I also do a lot of work on a scroll saw too! Thanks for another good one!
Cheers Al
Thanks a lot, Al! 😊
Great video. Thanks for sharing. It has been most helpful. I also enjoyed seeing your shop from a different point of view and especially some of the “hidden” places ( tool storage areas, drawers etc.).
Glad you enjoyed it, Doug, thank you! 😊
So true every thing you touched on in this video. As a new turner I went 7 different lathes before I got to number 8 and 9 that I settled on. Had a Rockwell, couple of harbor freight,a nova and a couple of jets. I finally settled in with the Laguna. And I have two a Revo 12/16 and a 15/24. I think I am done I hope. All used and off marketplace except for the last one that I got new but on sale. This all took place over five years. Got a pretty good collection of accessories and nova chucks that way. Tools are not cheap and you got to have some sandpaper. At least wood is the right price. Just got to stay on the look out. And then figure out where to store it. Got a load on my trailer now that’s been there a week with no place to stack it in the dry😊. Great video Phil. Dan
Wow, you are ready for bear, Dan! Enjoy! 😊
@@PhilAndersonShadyAcresWoodshop I had a question for you but forgot by the time I made a comment. How do you clean your CBN Wheels?
@@dt.woodcreations2064 I haven't, yet. I've heard WD40 and wipe with a rag but, I just don't know
Great video Phil.
😊
Всегда с интересом смотрю ваши ролики Фил,в каждом из них есть полезная информация, спасибо 👍👋
И я ценю, что вы здесь со мной, спасибо! 😊
Excellent presentation, Phil. Kudos!
Thanks, Jonny! 😊
Brilliant video. I wonder how many of us have worked out how much we've spent on our hobby. (Don't tell my wife 😂).
But as others have said, it's about the gratitude we receive from the recipients. And for those of us that sell at craft fairs, the compliments from the market goers who stop by.
Our craft inspires an emotional response and memories in others. (I've met so many people who have had woodturners in the family)
We are here to assist the wood to be turned into functional pieces of art, showing as much of the natural beauty of the wood and its tactile nature as possible!
Thank you, David, well said! 😊
Just a couple of tips I'd like to pass along...for those in wheelchairs or those who need or prefer to sit and turn...they actually make sit down lathes. Another great tip" I was watching a wood turning video (Sandy's Vintage Workshop or something) and they use a shop vac to clean their wood turning area and then use a shop vac to clean the floors. If you have ever seen The Wood Whirler videos...he uses nothing but Min Wax Sanding Sealer and his items are pretty nice. I think Min Wax is a gallon for maybe $30.00. He also swears by Acks...which is around $28.00 for I don't know how long.
😊
Im a beginner turner who predominantly turns sitting down due to back issues. Here in Australia there is only one brand and model of sit-down/angled lathe and they're stupid expensive... At the moment I'm working on seating position/lathe height to get me where I need to be. Far more cost effective and teaches you alot more about the process.
@@franknicastri9201yeah, put 'wheelchair' in the equation and things go way up. Are they available used? I'd put an ad in the paper...maybe someone had one because they got hurt and now they can stand....
Beautiful broken down, thanks for the information❤.
😊
Thank you for taking the time and sharing.
My pleasure! 😊
Great video Phil! I look forward to your weekly videos, as I have only been a wood turner for a little over two years. I picked up alot from your posts and wanted to thank you! Also, with all that wood worker wood, you should try some segmented turning. I thought is was going to be too difficult, but once you have a good sled to cut segments on, it's a ton of fun. Thanks again Phil....
I haven't turned on my Delta Unisaw in seven years. Can't even get near it! I miss it, dearly! 😊
Very helpful indeed! Always good to know best/affordable tools and supplies! I need to get me cbn wheels for my grinder and a couple of sand-o-flex! Thanks Phil!
I love both of those things, Brenda! They just make the whole experience so much better! 😊
Very informative Phil.thanks for the look into your wood turning world❤ thanks for sharing 😊
😊
Well that was different. Yes things have changed. They are not the way they use to be. The dollar doesn't stretch as far as it use too. Happiness isn't cheap. Thank you for sharing. See you next week
Well said 😊
Great video. Combination cost and shop tour. I appreciate your support of buying used at sales. Robert Sorby is to woodturning what Eddie Bauer is to well many things. Added cost! But it's good you talk costs and expenses. Nice, too, because so many folks don't talk about cost to us amateurs. I struggle with an HF lathe but have spent money on good chucks and tools and sharpening. I'm also getting by with one (!) Sand o flex. I counted 7 there😂. Anyway awesome video. You continue to inspire and educate. Thank you so much.
Haha, well, like I said, Steve, I've been at this a long time. I bought my first SOF from the hardware store I worked at 50 years ago. The rest came cheap on eBay. I just couldn't resist buying them over the years. Couple from yard sales, too. 😊
Personally , I try not to think of the expense . I too , am retired and its my favorite past time . I don't have half the equipment you do but I make do . Thanks for sharing this video . Quite informative .
😊
@@PhilAndersonShadyAcresWoodshop I'll give $150. for that Steady Rest . 😂 Just kidding . What deal that was . We hope you have a good weekend .
@@jonmartineau1004 Out of my cold, dead hands, Jon! You have a great weekend, too! It's sunny here for the next few days! 😊
@@PhilAndersonShadyAcresWoodshop😂😂😂😂
I appreciate your frugalness. I buy my sanding discs on Wish. I know it's from China. But being disposable items I think they work well
😊
Howdy Phil. Once again, informative as always. For $ 2200.00 I got my 2nd lathe from a guy who apparently believed in new and lots of. It's a Jet 1440VS but only runs in a forward direction. He also threw in ALL of his tools, a mix of Benjamin's Best & Robert Sorby. A Rikon grinder with a 180 CBN wheel that he discolored with something. Looked like the red stain from a tool handle. It cleaned up nicely with WD-40 & a steel brush. Also a hand made 9" sanding station that is actually very well made. A One Way sharpening system that is mis-aligned in the jig set up, ( fixing that now) a couple of Vic-Marc chucks and jaw inserts, and two well built cabinets that fit under the lathe bed like yours do but are open faced with one holding the lathe tools which looks nice but is dangerously close to where I stand and not user friendly when grabbing a fresh tool or replacing the previous tool and needs re-designing. I've been bitten a couple times now. The lathe is only 3 years old and worth more than the cost. Yes, sweet deals can be found if you keep your eyes open and are patient. Take care and keep turning. Bill Riley
That all sounds great, Bill! 😊
Great video Phil. People don't realize the start up cost of becoming a wood turner.
😊
Thanks, good job like always Phil.
Thanks again, Charlie! 😊
Thanks for sharing, A pleasure as always. 😊
Thanks again! 😊
excellent video. I wish there had been something similar when I decided to try woodturning. I, like you, woodworker for over 38 yrs. When I was getting close to retirement, Isaw a Rikon midilathe on sale at woodcrafter and I bought it. It sat in my garage/shop for 6-9 months unused ( I had a few projects I needed to complete before I could try and find room for a lathe setup. Once I set it up and used it, I was hooked. I've been turning now for about 6 yrs. During that time I have spent a considerable amount of cash and tools and supplies. The total cost far outweighs the cost of the lathe. I do sell some of my work. It helps me pay for more wood. As my skills improve, ,I prefer turning different species pf wood. I live in Florida, so hardwoods can be challenging to find, but they are available if you travel around the state. But when I consider the cost of it all, for me, it was a great investment. I have get great pleasure putting a piece of wood on the lathe and seeing what is inside of it. It gives me great joy and purpose in my retirement.
That's what it's all about, Robert! 😊
Great informative video Phil.
Glad you enjoyed it 😊
Phil, Great review! Thanks so much!!
😊
Not a wood turning video, but just as interesting. Really enjoyed it.
😊
Good video Phil.
😊
I go to Estate sales every week and I often find wood along with a few tools. I have found gouges at Peddler fairs and sometimes you can haggle a real deal.
Yup, yup! 😊
So much stuff!!
Hope all is well with you
Luie! Where have you been? Good to hear from you, my friend! 😊
@@PhilAndersonShadyAcresWoodshop busy with life but I’m still keeping an eye on you🫣😎😀
Thanks phil for a great presentation, wood turning can be expensive but like you I love a good bargain, we have what they call Garage sales here in Australia and you can really pick up some cheap ( but good quality) items, just about all my wood is FOG wood and I have a few friends that live on old disused chicken farms and the is always a tree that has been blown over so I’m straight over there with the chainsaw.
Anyhow thanks for sharing.
All the best to you.
Regards Jim
Yup, a chainsaw comes in handy, Jim! 😊
Great video really helps for us future woodturners , much like my RC plane hobby it is expensive but fun an relaxing
Yeah, really, almost all hobbies are expensive! 😊
You are correct about variation in prices. I am in Canada, so add roughly 35% to the cost. We struggle getting some of the stuff you people in the States have access to. Shipping has skyrocketed as well. People look at the lathe, but tooling, sharpening system, chucks, etc can add up to far more than a lathe.
So true, Scott! 😊
Great video, Phil. I'm like you, in both philosophy and age! Most of my stuff is over 25 years old and I would cringe if I had to buy it again new! Fortunately I've been doing craft shows for about the same time so most of my equipment was purchased from those proceeds.
Right on, Tom! 😊
Out of every expense in my little shop wood and sandpaper probably is the most money spent equal to all the equipment! so true on the chucks I ended up with 3 for the same reason
😊