It appears that the type of bulb you put in is an improved bulb over factory (If I'm correct) - so I was wondering if you also changed the passenger side (while you had the access) since the driver side would be brighter than stock... ?? I'm wondering if you noticed a difference in the better bulb type...
yes, I replaced the factory bulbs on passenger side as well, just didn't film to keep video short. But, the new bulbs were much better than factory and I would recommend them. The Sylvania brand also makes bulbs for my mustang so I upgraded those as well.
When did changing a bulb become so troublesome? I miss the old days when you could just reach in and change a bulb without pulling off the front of your vehicle.
Thanks for the video. I've been searching for a halogen upgrade to my stock lights. Yours is the only one I've seen. Everybody wants you to upgrade to led or HID or Projectors or some such nonsense. I just wanted slightly better than stock. I'm mainly changing my original headlight assemblies because they've yellowed and degraded over the years. Buying some OEM Mopar parts so I can keep it bone stock. (except for the bulbs) 2011 Ram 3500 CC LB 4x4 SLT Diesel Outdoorsman. Original owner, 75K miles.
Watched several videos on how to do this and they all showed complex ways of doing it - Really dreaded the thought of going out to the garage to replace a headlight - right before I went out to tackle this, just happened to run across your video - sooooo much easier this way. 20 minutes to knock out both sides. thank you.
Just last night I noticed my driver’s side low beam went out on my 2010 Ram and I have watched 5 videos of the bulb replacement and yours is the best by far! I’m wanting to upgrade all of my bulbs at the same time because I always thought the factory original sucked!
Any time there are weird clips mixed with screws holding something in, you need a video like this to get it off. Otherwise you don’t know if you got all the screws and bolts. Good video.
I have a 2012 and this video helped me replace my headlight bulb. As for the negitive comments, my dad use to say "EVERYONE LIKES A LITTLE ASS, BUT NOBODY LIKES A SMARTASS!" Apparently, the people with the negative comments wouldn't have watched the video if they already knew how to install the new bulb. THANKS FOR TAKING THE TIME! "ANY SAMPLES?"
There’s actually a way easier way. Behind the fender is a compartment that you can open to push the white pin down. Also you can remove the 2 screws with an extension and the light will come out. But either way you explained everything well 👍
Just replaced mine for the second time on a 2016 and you’re exactly right. Two bolts, push down the lock from the front tire area and you’re set. Definitely needs an extension and 10mm socket
Thanks for the video. I didn't have a long 10mm extender but your video removed the grill, making that tool unnecessary. Fifteen minutes and I'm back in business. Much appreciated!
Thank you very much for this video. Wow. These damn manufactures don't make it easy for something that should be simple. There are a lot of of steps involved but thanks to you I know what to do
you can skip the steps of removing the grill. just use an extension from the top and loosen the lower bolt that way. way faster and easier to change the bulbs. I hate doing shit you don't need to.
7:40 made all the difference in the world!! It's one of those things that once you've done it, you could do it in your sleep, but before that, you're flying blind. Thanks so much for this video!
Your step-by-step approach was really good, perhaps next time you should include additional info. about what would be the correct size of the socket to use. (some people might get it wrong) I would also suggest putting a couple of strips of masking tape on the painted area under the headlight housing to protect the paint from possible scratches during the R&R process, as well as informing people to never touch the glass portion of the bulb assembly with their fingers, due to the oil from their skin making the bulbs run hotter and thereby burning out quicker. I did like the fact that you included the correct blub replacement numbers. :)
yes I read the comments just to make sure someone brought that, my house is better then yours shit up! If you didn't intent to come off that way just don't do it next to time.you want an idea for an introos burn some race strips down your drive way while saying "NEED NEW HEAD LIGHTSSSZ?" That will get my vote
@@PhatPharmacist This was a great video, carefully and completely explained. And you have a nice house. Never mind the haters - they're just doing what they do. Thanks.
Reginald Jones its all good. I’ve come a long way from my first job at McDonald’s, then worked all through college in order to be able to do what I do today as well as working hard as a clinical pharmacist. If I can do it, I want others to know they can too. Always keep moving toward your goals and dreams.
Agree why do we need a tour of your garage? Im still trying to figur out why poeple are tear the front end of their trucks? I have a 2009 Ram and i have never once had to do this to replace a headlight bulb.
I think it’s possible. I didn’t try that at the time I made this video but feedback from some others noted it was possible to do without removal of grill.
I have a 2014 and I did it different wayl. To replace the bulb 💡 head light bulb i only loosen two bolts 🔩 and a lock plastic pin and pulled out the hold head light ensamble on both right and left side without removing the grill and other components, it was simple. Some time later I must load up a video on how easy I did it and there is another guy who's did the same thing 🤔
I've seen other videos where the shroud and grill are left on. They just use an extender to remove the 10 mm bolts and do all the work from the rear access point in the wheel well. Is it really necessary to remove the shroud and grill?
Thanks for the video just got some 8k LED light bulbs in and looks great! Just hope that I won’t get pulled over for how blue they are but not as bad like the 10k
Hello quick question, what’s the numbers of the tires u got on the truck, looks amazing, I do have same truck with the same rims , and what’s the brand, thanks for the video , very helpful 👍👍👍👍
They are the Falken Wildpeak A/T 275/60R20. Have done great on mild off road trips, beach trip, and good in the rain. There are lots of options out there, but for me they are a great value, I would buy again.
Yes, Sylvania carries replacement bulbs for the 2018 model too. That year there was a slight redesign of headlight compared to my year truck and some Have a projector style headlight. Checkout sylvania-automotive.com for bulb selection guide for your specific vehicle. Hope that helps.
yes. my '19 ram 1500 classic still uses the same bulbs as well. I already changed a bunch of bulbs in the rear and inside the cabin to L.E.D. and will be replacing the hi and low beam bulbs with some that are 6500k temperature. they are super bright, white and make it soooooo easy to see at night and when it is raining versus the factory yellowish color bulbs.
Hello nice video I just wanted to ask you why did you change the high beam bulb? Were both bulbs bad or it is recommended to change both at the same time? Nice hose by the way
Thanks, I decided to change both out and upgrade to Silverstar bulbs since I was going to be taking the headlight out to replace the one bulb that already Burnt out.
Jason Johnson yeah, after doing this, I think you can get to the one bolt behind the grill with and extension and then when ready, wiggle the light and get the one side to slide away from behind the edge of the grill.
Thanks. I bought the truck brand new and for seven years and about 135k miles later, never had anything breakdown and this truck has been super reliable. It’s been a great truck overall.
Just looked under the hood of my 1500 & thought, how the hell am I supposed to get access to change the bulb? So, thanks for posting this video but I can't believe what a hassle this is. I don't know what the manufacturer was thinking, totally ridiculous.
Dang, thats a bummer that you got stuck doing that in the freezing snow. But hope the video saved a little time and sped up the process so you not stuck out there too long, best of luck.
Hey I have the same truck, replaced my bulbs and sometimes they come on, sometimes it's just one. I'll have to hit the headlights lightly to get them to come on. Did you have that problem?
TreySkillz no, didn’t have that problem. Kinda odd that after a light tap it works again for ya, maybe there is a loose connection or some corrosion on plug, hard to say.
I'm having the same problem now. It is the wiring/connector for certain. It turns out that's a common problem with Rams. It makes me wonder if my bulbs were actually burned out the first time I replaced them.
Sorry I do not want to step on your toes and feel free to delete this, I'm just trying to inform you of a better way to teach people. If you have a newer Truck like 2018 to 2019 do not pull the drill off if you bust the tabs off that help hold the grill in place you will lose your warrantee on that, the bolts on even this model is accusable without removing the grill. you just need a 12" extension for the bottom bolt and a wrench for the top bolt. once bolts are removed then it is simple to pull the headlight out starting and pivot it out from the fender side. This is how I have been doing it at work ever since dodge mechanical rep taught us how.
They are the Falken Wildpeak A/T 275/60R20. Have about 30k miles on them now, and been great so far. Have done great on mild off road trips, beach trip, and good in the rain. There are lots of options out there, but for me they are a great value, I would buy again.
I did everything step by step and was doing fine until it was time to take the actual headlight out. It was loose, but wouild not pry out. I spent an hour trying to get the headlight out, but just had an epic fail. :-(
I’m sorry I mean I don’t see why you had to take the grill off because it had a deadman didn’t even take the parking girl off the top the head lights out easy and that was it
Thanks now I can fucking show this to my dad since he won't let me just do it in peace rather he likes to tamper with shit until he breaks something else
@@adrianmejia5686 id recommended the tool, it’s cheap and can find at Walmart or parts store like autozone. Good to have in the tool box for future projects too. Clips can be tricky to find these days if they get broken.
american engineering at its best!!! WTF!! you should be able to change a light bulb on the side of the road on the spot for safety.. this is designed to take it to the shop and spend $$$$
It appears that the type of bulb you put in is an improved bulb over factory (If I'm correct) - so I was wondering if you also changed the passenger side (while you had the access) since the driver side would be brighter than stock... ?? I'm wondering if you noticed a difference in the better bulb type...
yes, I replaced the factory bulbs on passenger side as well, just didn't film to keep video short. But, the new bulbs were much better than factory and I would recommend them. The Sylvania brand also makes bulbs for my mustang so I upgraded those as well.
When did changing a bulb become so troublesome? I miss the old days when you could just reach in and change a bulb without pulling off the front of your vehicle.
I'm with you on that thought.
Since the manufacturers want us to bring our cars to the dealership to change a small thing like a bulb and charge us an hour labour plus parts.
Doesn’t seem that troublesome, and he kinda did it the hard way you can use extensions for those bottom blots and it save a lot of time
@@alexandrecouillard2 it’s easy enough to do yourself
It’s eZ
Thanks for the video.
I've been searching for a halogen upgrade to my stock lights.
Yours is the only one I've seen.
Everybody wants you to upgrade to led or HID or Projectors or some such nonsense.
I just wanted slightly better than stock.
I'm mainly changing my original headlight assemblies because they've yellowed and degraded over the years.
Buying some OEM Mopar parts so I can keep it bone stock. (except for the bulbs)
2011 Ram 3500 CC LB 4x4 SLT Diesel Outdoorsman. Original owner, 75K miles.
Watched several videos on how to do this and they all showed complex ways of doing it - Really dreaded the thought of going out to the garage to replace a headlight - right before I went out to tackle this, just happened to run across your video - sooooo much easier this way. 20 minutes to knock out both sides. thank you.
What vehcile? Wondering if it's the same for a 21 warlock
I'm replacing the bulb on the passenger side tomorrow,
2016 ram ,I got LED 9005 ,
Thanks to this video ,now I know how to replace it.
Thank you
👍
My bulb change went so much easier because of watching this video. Thank you for making it man!
👍
Just last night I noticed my driver’s side low beam went out on my 2010 Ram and I have watched 5 videos of the bulb replacement and yours is the best by far! I’m wanting to upgrade all of my bulbs at the same time because I always thought the factory original sucked!
Any time there are weird clips mixed with screws holding something in, you need a video like this to get it off. Otherwise you don’t know if you got all the screws and bolts. Good video.
Love how the whole process was carefully explained in this video (especially the pins). It's very easy to follow. Nice jet ski by the way, man!
I have a 2012 and this video helped me replace my headlight bulb. As for the negitive comments, my dad use to say "EVERYONE LIKES A LITTLE ASS, BUT NOBODY LIKES A SMARTASS!" Apparently, the people with the negative comments wouldn't have watched the video if they already knew how to install the new bulb. THANKS FOR TAKING THE TIME! "ANY SAMPLES?"
Internet full of trolls, oh well. I do what I want.
There’s actually a way easier way. Behind the fender is a compartment that you can open to push the white pin down. Also you can remove the 2 screws with an extension and the light will come out. But either way you explained everything well 👍
Just replaced mine for the second time on a 2016 and you’re exactly right. Two bolts, push down the lock from the front tire area and you’re set. Definitely needs an extension and 10mm socket
Man did you ever just save me a lot of time and stress worrying about those clips lol
Top comment !!!
no grill off either
You can save time by NOT removing the grill just use a long extension to remove the lower bolt
Thanks for the video. I didn't have a long 10mm extender but your video removed the grill, making that tool unnecessary. Fifteen minutes and I'm back in business. Much appreciated!
Good to hear your project worked out 👍
Thank you very much for this video.
Wow. These damn manufactures don't make it easy for something that should be simple. There are a lot of of steps involved but thanks to you I know what to do
you can skip the steps of removing the grill. just use an extension from the top and loosen the lower bolt that way. way faster and easier to change the bulbs. I hate doing shit you don't need to.
7:40 made all the difference in the world!! It's one of those things that once you've done it, you could do it in your sleep, but before that, you're flying blind. Thanks so much for this video!
Good tip Jim Webber. Before I start mine I am going back for another one.
Your step-by-step approach was really good, perhaps next time you should include additional info. about what would be the correct size of the socket to use. (some people might get it wrong)
I would also suggest putting a couple of strips of masking tape on the painted area under the headlight housing to protect the paint from possible scratches during the R&R process, as well as informing people to never touch the glass portion of the bulb assembly with their fingers, due to the oil from their skin making the bulbs run hotter and thereby burning out quicker.
I did like the fact that you included the correct blub replacement numbers. :)
i got my headlights changed pretty quickly after watching this video. thanks buddy
Very nice video. Well detailed, with the exception that you did not mention not to touch the glass of the light bulbs with the bare fingers.
That’s a good tip 👍
Man they sure don't make anything easy anymore. Thanks for the video though.
One of the best tutorial videos on TH-cam. Thank you!!!
Dude- you took what would have been a job with alot of cursing if done blind without any leadership and made it a walk in the park. THANKS MAN
Good to hear the project went well, Thanks for stopping by the channel
Could lose the episode of MTV cribs at the beginning
Will keep that in mind. Open to other intro ideas to improve the channel content.
yes I read the comments just to make sure someone brought that, my house is better then yours shit up! If you didn't intent to come off that way just don't do it next to time.you want an idea for an introos burn some race strips down your drive way while saying "NEED NEW HEAD LIGHTSSSZ?" That will get my vote
@@PhatPharmacist This was a great video, carefully and completely explained. And you have a nice house. Never mind the haters - they're just doing what they do. Thanks.
Reginald Jones its all good. I’ve come a long way from my first job at McDonald’s, then worked all through college in order to be able to do what I do today as well as working hard as a clinical pharmacist. If I can do it, I want others to know they can too. Always keep moving toward your goals and dreams.
Agree why do we need a tour of your garage? Im still trying to figur out why poeple are tear the front end of their trucks? I have a 2009 Ram and i have never once had to do this to replace a headlight bulb.
Cool thank you
You bet
Excellent video! I'm completely confident I can do this myself after watching this video.
Thanks, partner. You just saved me a headache
The very best video on this topic. Great work!
Michael Schoemann thanks for stopping by the channel
You guys buddy's or what?
@@eliaschavez7635 No, but appreciate all input, thanks for stopping by the channel you guys
On some of the newer rams there is an access to the lower bolt without taking the the top rad cover off.
Thanks a lot men ⭐️ ⭐️ ⭐️ ⭐️ ⭐️
From start to finish your vid help me out plus I get to Save back on money 💴
Definitely give five star rating
Glad is was able to help save a few bucks, thanks for stopping by the channel
Just got a used 18 and wondering if you can just use a long socket extension to get the bottom 10mm out rather than removing the whole grill?
I think it’s possible. I didn’t try that at the time I made this video but feedback from some others noted it was possible to do without removal of grill.
This worked for my 2014 ram 1500 however the low beam is not
H11 ...something ele
Thanks for the video!!
Pull out like 3 8mm bolts I in your wheel liner, and pull it out of the way and you can change your bulbs without removing your lights
I have a 2014 and I did it different wayl. To replace the bulb 💡 head light bulb i only loosen two bolts 🔩 and a lock plastic pin and pulled out the hold head light ensamble on both right and left side without removing the grill and other components, it was simple. Some time later I must load up a video on how easy I did it and there is another guy who's did the same thing 🤔
Yes, no need to pull the grille or the top cover. Sometimes these video's don;t show the simplest way to do things.
I've seen other videos where the shroud and grill are left on. They just use an extender to remove the 10 mm bolts and do all the work from the rear access point in the wheel well. Is it really necessary to remove the shroud and grill?
I guess There is a way if have extensions, but only takes a few minutes and makes it easy for me.
Thanks for the video just got some 8k LED light bulbs in and looks great! Just hope that I won’t get pulled over for how blue they are but not as bad like the 10k
Sounds good for night driving in deer country 🦌
Great video.. But the Ram 1500 headlight setup is the worst I've ever seen in my life. This is absolutely abysmal design.
I'm learning how to fix head lights
Why take the grill off? 2012 Dodge ram 1500 here. I take out the 10mm bolts, pop up white clip in back and presto IT'S DONE
I tried but two lower bolts were hard to reach with grill on
I believe the bottom bolt also has the adjuster for your headlight.
skip to 2:00 to see the start of disassembly.
Thank you for the video. I have a 2019 and it works the same.
Hello quick question, what’s the numbers of the tires u got on the truck, looks amazing, I do have same truck with the same rims , and what’s the brand, thanks for the video , very helpful 👍👍👍👍
They are the Falken Wildpeak A/T 275/60R20. Have done great on mild off road trips, beach trip, and good in the rain. There are lots of options out there, but for me they are a great value, I would buy again.
Thanks for the advice sir
Did you have any issues with the pins snapping? Just bought a used 2018 big horn and was wondering if I should just get some extra
So far no issues with that although I have head it can happen.
are the plastic caps that prevent water from getting in interchangable ?
If I remember correctly, I think they were the same size
very good demo!
Great vid!
Good day, does the 2018 Dodge ram 1500 carry the same hi and low beams bulbs?
Yes, Sylvania carries replacement bulbs for the 2018 model too. That year there was a slight redesign of headlight compared to my year truck and some Have a projector style headlight. Checkout sylvania-automotive.com for bulb selection guide for your specific vehicle. Hope that helps.
yes. my '19 ram 1500 classic still uses the same bulbs as well. I already changed a bunch of bulbs in the rear and inside the cabin to L.E.D. and will be replacing the hi and low beam bulbs with some that are 6500k temperature. they are super bright, white and make it soooooo easy to see at night and when it is raining versus the factory yellowish color bulbs.
Hello nice video I just wanted to ask you why did you change the high beam bulb? Were both bulbs bad or it is recommended to change both at the same time? Nice hose by the way
Thanks, I decided to change both out and upgrade to Silverstar bulbs since I was going to be taking the headlight out to replace the one bulb that already Burnt out.
Good rad inspection
Oh, look at what I got!
Just to let you guys know you do not have to take the grill off
Jason Johnson yeah, after doing this, I think you can get to the one bolt behind the grill with and extension and then when ready, wiggle the light and get the one side to slide away from behind the edge of the grill.
Isn’t the bottom bolt also the adjuster for the headlight?
Exactly! You don't have to take the grill off to replace the head light bulb but I guess everybody does it different
Thank you so much for this tutorial!!!
You just saved me $300 to have someone else replace it
Thanks for the vid. Very helpful.
Does it throw the alignment of the headlights off?
No, original headlight alignment is maintained.
Love ur tires man. They're great tires.
Great video & awsome home your doing something right for sure :)
Thanks
Nice job. Steve RPh.
Nice Truck! I have one exactly like it but it’s an 09. Have you had any problems with yours?
Thanks. I bought the truck brand new and for seven years and about 135k miles later, never had anything breakdown and this truck has been super reliable. It’s been a great truck overall.
Just looked under the hood of my 1500 & thought, how the hell am I supposed to get access to change the bulb? So, thanks for posting this video but I can't believe what a hassle this is. I don't know what the manufacturer was thinking, totally ridiculous.
Rick Guenther I agree. It’s like they figure out best way to assemble it but good luck working on it once put together
Nice video!
Thanks for stopping by the channel
They couldn't make it more of an ass ache could they. It's snowing here and below freezing and I have to do this outside with no cover, no garage.
Dang, thats a bummer that you got stuck doing that in the freezing snow. But hope the video saved a little time and sped up the process so you not stuck out there too long, best of luck.
agreed
Hey atleast it wasn't 100 with no shade lol
Hey I have the same truck, replaced my bulbs and sometimes they come on, sometimes it's just one. I'll have to hit the headlights lightly to get them to come on. Did you have that problem?
TreySkillz no, didn’t have that problem. Kinda odd that after a light tap it works again for ya, maybe there is a loose connection or some corrosion on plug, hard to say.
My brother had that issue on his 2009, turned out to be a bad wire on the plug
it could be the tiny filament inside the bulb is broken and makes contact intermittently.
I'm having the same problem now. It is the wiring/connector for certain. It turns out that's a common problem with Rams. It makes me wonder if my bulbs were actually burned out the first time I replaced them.
What is the tool that you used to get the push pins out called? (green handle)
Its called a trim panel removal tool.
Door panel puller
Great Video! Very descriptive
Thank you very much for your video good help !!!!!
No problem, thanks for stopping by the channel
Sorry I do not want to step on your toes and feel free to delete this, I'm just trying to inform you of a better way to teach people. If you have a newer Truck like 2018 to 2019 do not pull the drill off if you bust the tabs off that help hold the grill in place you will lose your warrantee on that, the bolts on even this model is accusable without removing the grill. you just need a 12" extension for the bottom bolt and a wrench for the top bolt. once bolts are removed then it is simple to pull the headlight out starting and pivot it out from the fender side. This is how I have been doing it at work ever since dodge mechanical rep taught us how.
What kind of tires you have on your truck
David Bautista They are the Falken Wildpeak A/T 275/60R20
Thanks 🙏🏿
What kind of tires do you have on the RAM?
They are the Falken Wildpeak A/T 275/60R20. Have about 30k miles on them now, and been great so far. Have done great on mild off road trips, beach trip, and good in the rain. There are lots of options out there, but for me they are a great value, I would buy again.
those are nice but the YOKOHAMA GEOLANDER G015 is what I prefer. check them out.
I did everything step by step and was doing fine until it was time to take the actual headlight out. It was loose, but wouild not pry out. I spent an hour trying to get the headlight out, but just had an epic fail. :-(
Good job on the video.
Obliged.
What a work only for a light bulb 🙄 next you gotta dissemble the whole engin to change oil 😂! Ill go to my garagist for that
Thanks bro! 👍🏾
I’m sorry I mean I don’t see why you had to take the grill off because it had a deadman didn’t even take the parking girl off the top the head lights out easy and that was it
Thanks now I can fucking show this to my dad since he won't let me just do it in peace rather he likes to tamper with shit until he breaks something else
Yeah, be nice if he don’t break the clips
@@PhatPharmacist should I be worried about that or should I get him that tool u were using to remove them carefully
@@adrianmejia5686 id recommended the tool, it’s cheap and can find at Walmart or parts store like autozone. Good to have in the tool box for future projects too. Clips can be tricky to find these days if they get broken.
@@PhatPharmacist thanks partner
Dodge made this unnecessarily difficult
You spent the first two minutes bragging. Good job
Andrew Jackman yeah well, I worked hard for it, first job was McDonalds, so now I do what I want. When you become a millionaire you can brag too. 👍
harley busa well, guess it’s easy to see there is nothing in my house worth risking your life for.
@@harleybusa8528 lol
@@PhatPharmacist flexing on poor's is always awesome
Who else just pulls up on the plastic clips by hand😂
When you find out you did not have to take all that off to get to head light, you are going to feel silly.
Yup, after doing the install, later learned it can be done differently.
This is so excessive to replace a bulb
american engineering at its best!!! WTF!! you should be able to change a light bulb on the side of the road on the spot for safety.. this is designed to take it to the shop and spend $$$$
I thought this was about a dodge truck
Who cares about everything in the garage
Slowest dude ever!
you are doing it all wrong
This guy wanted to show off his house..no class
I’m here for the light bulb replacement. Not your family history or tour of the house, WTF!? Light bulb. Get on it.
Haha, Posting on a video I did years ago and I don’t have the truck anymore. But feel free to use that fast forward button like everyone else does
Yup! That’s how TH-cam works bud. If you don’t like feedback, don’t upload personal videos. Keep it simple stupid.
@@BGoetz1182 and it’s a free country and I can upload what I like too. Don’t be a Karen