Thank you so much for this video. I, like many was struggling to get my bed level. Your explanation of this technique helped me get my bed variance from 0.5100 to 0.1625 which resulted in my best first layer ever. You earned my thanks and subscription.
Thank you so much! Bed leveling can be the bane of a 3d printers existence, but smart tools like this can help give us some power back! Glad this helped and thanks for the subscribe and the comment !
Oh man, I'm late to the party but this has solved all my issues. For anyone with a larger print bed with a set point in the middle (such as the Elegoo neptune 4 plus), set screw 1 as the very center of your bed - and add the additional other screws using the same format. (I have 6 screws, so 1 is set to the center of the bed and 2 through 7 are the other 6 screws) I wish i had found this a week ago!
Glad you found it! Klipper is full of so many amazing tools sometimes the hardest part is finding them. Great info about using multiple screws as well, there was some questions about that when this video first came out and this comment will help a lot of people!
Hi, first of all, great video, everything very clearly described and explained. I applied this method to my Elegoo Neptune 4 Max and added 2 adjustment points. The only deviation I made was not using a probe, I centered the nozzle above the 6 adjustment points. I ran the "Screws_tilt_adjust" tool 3 times in a row with the final result - at 5 points it was 0.1 and at 1 point 0.0, so I wisely left it at that. Afterwards I did a "Bed Level Calibration" test and it was perfect. From now on this is my way to level. Many thanks for posting this method on TH-cam.
Thank you so much for taking time to write such a detailed comment and letting me know this worked. Much appreciated, I'm glad you found me and I was able to help!
Youre a Hero! I dont know why i stumble over this for so many years and why no "Big TH-camr" covered it so far, this is amazing! Thanks to you i reliably get 0.1 on every screw now thank you so much! Ordered a acceleration sensor aswell to follow your guide and more videos from you!
Yea this can be a real game changer for people. It saves time and can be very accurate. I am happy you found me and I promise I will continue to be making content just like this that is aimed to help. Good luck and happy printing!
Your timing with this video is perfect for me Leo. About two weeks ago I finally got back into 3D printing with my self modified CR-10 after a four year pause (work and life got in the way). I loaded Klipper (had been running Marlin) after seeing all the features it adds and have been bringing myself up to speed on it. Bed leveling has always been a very time consuming thing for me. Your method and pace of explaining the process is perfect for me, you have another subscriber!
Thank you so much I love to hear it! Helping people enjoy their printers has been a huge goal of my channel. I think you chose right with Klipper, it has so many tools to help a printer from 4 days ago or 4 years ago get up and running smoothly. I'm glad you found me and I appreciate the subscribe and comment!
I´m not good at express myself, but man this channel has everything you need and want! Especially for a klipper newbie like me. I have been using both Maker´s muse and Teaching tech a lot in the past, but you Leo will defentliy be my "go to" in the future when I nned help with my 3d hobby. I really like the way you describes everything in detail, and not just a "paste and copy what I do on the screen" channel. Thank you so mush for the help Leo.
Oh wow thank you so much!! It takes me a while to make these videos, which is unfortunate, but it's because I spend a lot of time making sure the flow of the information is right (as well as the info itself lol). It's great hearing that these sort of videos are paying off for people because it makes all the time worth it. Thank you!!!!
Your videos are fantastic. I find that after watching your videos on a specific topic, I don't need to consult any other sources online. Your Klipper videos are reminiscent of Joshua Bardwell's FPV videos. Keep up the excellent work!
😆 I can do it with my eyes closed now but when I first got into the hobby 3 years ago bed levelling was the bane of my existence. If it wasn't for your video on bed levelling and z-offset I probably would have quit.
Zoomy keep your eyes on the road!! Lol I'm happy you stayed because this community is all the better for it, including all the tots you helped with a long with Fedor for the holidays. Thanks
If you remove the PEI sheet from the bed, you can very easily see the little indentions for exactly where the screws are. I even marked mine with a sharpie to make seeing them even easier. Once you have the locations noted, you can easily put the PEI (or whatever build plate you're using) back on and continue the process.
Scott!!! What a great idea. I didn't even think about that. There are some beds (like my original Aquila) where I had to place the magnetic on myself, so there aren't any screws visible, but by and large I think your technique would work like a charm! I am adding a few addendums to this video and this info will definitely be part of it! Awesome suggestion, I appreciate you contributing.
Thanks! Even as a noob, I was able to get real close using the paper method but this is so much easier...especially if you want to check level periodically. Subscribed!
Yea the paper method is tried and true , but is tricky and time consuming. This is so quick and easy it almost feels like cheating! Thanks for watching, commenting, and subscribing!!
You are doing an awesome job on your videos. I bought a Klipper Pad 7 watched a few videos and was lost pretty early. I decided to watch your video and boom up and running. Thank you so much.
I'm happy to help you get back on track! I actually have a BTT Pad 7 sitting in the box. I wanted to do a video on it a few months ago but never found the time. Maybe it's time to break it out!
Omg, thank you! Was just thinking the other day, why can't I just use my bed probe to tell me exactly how much to turn the screws instead of doing it manually? 😂 Thank you, and the algorithm for suggesting this. I have a Sonic Pad and had no idea this feature was in Klipper! (Also, pst, one minute on a clock is 6 degrees, not 1... 15 minutes is 90 deg.)
This is such a convenient feature, and I wish you luck when adding it. I know some users that have had issues with the Sonic Pad in general. Hopefully the addition of this macro is 1-2-3 for you. If not let me know and I'll see how I can help!
Thank you so very much for this, think this is your first video I’ve seen and I’ve just done it. Leveled my screws now just to test its worked, if it has thank you so very much.
Thank you for this. This makes learning 3d printing as hobby much more enjoyable. Just did this on my Neptune 4 Pro, Got it down to 00:00 on everything.
Thanks! The BL touch video is long, but it's where I would recommend to start. It goes over how to make sure your bl touch is setup correctly which is the baseline for a lot of these calibrations.
Thanks so much for sharing this method. So much easier. I've noticed the wheels on my Neptune 4 Pro have 10 bumps on them, so allowing for each being 6 minutes apart makes it extremely easy to turn them just the right amount.
Oh wow that's great! The knobs on the Creality style machines have so many grip areas that it is hard to track. It would be cool to see a printable option that mirrors the knob style that Elegoo employs, or make it even more specific to this calibration!
You mentioned to just find an empty space in the config file. Does it matter if this is in the beginning or end or after a particular section? I have several empty at the beginning and didn’t k ow if it would be okay to place it first. Thanks
Happy to help! This calibration is really such a time saver and I think it helps increase accuracy that comes from rushing through it when you do it yourself. Thanks for watching and commenting!
With much appreciation but the workflow has changed the last 2 years. I think it’s time to follow the new technologies and advancements. But thanks for the effort to explain very thoroughly.
Alexandre, I don't have any hands on experience with either of those machines, so I only can give you advice through what I have heard and have researched. I know the Anet line has somewhat of a dark cloud over it due to performance issues. I don't know if those stories are true or untrue (or likely somewhere in the middle) but from the quick searching I did I was unable to find a suitable Klipper configuration file. For the Tronxy I know a lot of people who have Klipperized them. I couldn't say for your exact model but I was able to find one github repo that had some instructions: gist.github.com/cab404/b7bcbb0cd592a14515493694719de59b In my opinion flashing Klipper on any 3d printer is an upgrade, but it will require some new hardware. You will need a 'host device' to run the brains of Klipper. That device can be anything that can run Linux (a raspberry pi, tv box, Inovato Quadra, or an old PC). From there you would need to just find a configuration file for the 3d printer you want to use with Klipper (I found something for the Tronyx but didn't come up with anything for the Anet, but that does't mean it doesn't exist). It's up to you the route you want to take, but either way I believe Klipper is an upgrade to most all of the base firmwares if you are willing to give it some time and some research.
Thanks @@PrintsLeo3D for your quick response. Sure Aneth A8 and A6 got a lot of issue with overheating/fire in the past. I've instal 2 mosfets and never got any trouble in last 5 years. And today only a broken fool would buy a new A8-A6 unit because there is better option on the cheap side. I'll look for the tronxy, I do have an old laptop. I would love to include a accelerometer sensor and get BambuLab speed on the cheap... I can dream.. I know...
This is an awesome how to Leo. This type of tool could seem so complicated, but after a watch, you’ve made it so clear that it seems silly not to use it. Well done.
Thanks Fedor! Yea this changed the game for me, I could just run this occasionally to make sure the bed was locked down instead of going through the normal leveling process. Thanks for dropping a comment, you the man !
That's a great idea! I don't know how many people have dual stepper drivers to be able to use z_tilt, so it will probably be a little further down the catalogue. I want to get a few out there about max accels/ speeds and using KAMP, but I'll add it to the list!
This is what my first run said lol. guess i did a pretty good job without this. // front left screw (base) : x=60.2, y=9.6, z=-0.01000 // front right screw : x=314.2, y=9.6, z=0.02250 : adjust CCW 00:04 // middle right screw : x=314.2, y=142.6, z=0.03000 : adjust CCW 00:05 // middle left screw : x=60.2, y=142.6, z=0.01250 : adjust CCW 00:03 // rear left screw : x=60.2, y=275.6, z=0.03000 : adjust CCW 00:05 // rear right screw : x=314.2, y=275.6, z=-0.01500 : adjust CW 00:01
Yeah, i used to have bed leveling now it honestly feels good to know my stuffs on point. its alot better now that i got klipper.. doesnt feel like im going in blind anymore
Yea I know that feeling. You can just hit print and walk away without worrying. Don't forget to periodically level it though, preventative maintenance 😂
Thank you so much, that's really awesome to the hear! That's the goal, help more people transition to Klipper and get some more enjoyment out of their 3d printers! Thanks for taking the time to comment it made my day.
Awesome walkthroug for beginners and even advanced users :) one tip is to messure the thread (12:17) with the calipers paralell to the bed its much more easy =)
Thank you so much! A lot of the reason for me measuring it that way was for filming purposes lol trying to find the right angle for that can be tough. Great advice though and I thank you for taking the time to help me out! Thanks!
Do machines like Elegoo Neptune 4 that have "auto bed leveling" work with this method? I believe they have some sort of sensor to test the bed level built in - not an addon.
Thanks sm I appreciate it! I know there have been a lot of users with Elegoo machines that have helped contribute to this video by leaving helpful comments like this. So thank you and everyone else who helps make this video and comment section informatibe.
That's great! My goal with all these videos is to help however I can. I'm glad this video was able to give you something worthwhile. Thanks for watching and commenting.
New to the 3D printing world...Just came across this video and it looks very promising and easy to do. Question, for a printer that has 6 adjustment knobs what would the text commands be for the config file? I have a Neptune 4 Max and along with the knobs in the corners there's one in the middle on the left and right side of the bed. Would it be 'screw3_name: middle left screw', 'screw4_name: middle right screw', 'screw5_name: rear right screw', 'screw6_name: rear left screw' and confirm if so? Many Thanks and very thourouh on this guide!!
Alex, happy to have you in the 3d printing community! I have been getting a lot of questions about the Neptune Max 4 lately, and unfortunately I am not more familiar with the printer (besides seeing it in action at East Coast rep Rap in Maryland this year). As to your main question can you add additional screws to screws_tilt_adjust, and the answer is 'I don't thinks so'. I honestly hadn't heard of a bed with more than four screws, and lately beds are moving away from screws and going to a more 'fixed in place' structure. That being said when I get a free printer I will try and add some additional screws and see if Klipper accepts it. There's also the math that is involved with tilting a bed in quadrants, and I am not sure if Klipper is setup for a number greater than four. Let me do a little research and get back to you. Again, happy to have you aboard and I am glad you found my channel!
@alexautry5845 Your naming is correct but the numbering is out of order. I tried this and it worked, you can watch the order as it runs to confirm. LF 1, RF 2, LM 3, RM 4, LR 5, RR 6 Great video @PrintsLeo3d
@@DODGE1MOPAR AWESOME! Thank you for your response and the clarification! I had guessed which order after the Front left and front right lol. I'll try that when I get home and let you know. @DODGE1MOPAR, thank you again! I'm assuming you have an Elegloo N4M as well?
Woah!! I cannot believe Klipper allowed for adding more screws!! I'm sorry I never got around to checking, I honestly just forgot. Thank you @dodge1mopar for doing the work and finding out! This is great to know.
@@DODGE1MOPAR @PrintsLeo3D did you do this method on a Neptune 4 max? because i'm getting this error message when attempting.Which i get the same error message when attempting to do a mesh. "No trigger on probe after full movement" is the error message i'm getting.This printer is using some type of proximity sensor for metal because Elegoo says do not swap out mats that it has to be a metal mat for the sensor to work. The Kobra 2 Max is using a proximity sensor for sure just havent heard anything stated you can't. So, if anyone knows what i'm doing wrong or how to use this method with these types proximity sensors, please chime in.thanks in advance!!!!
Pat, I've never seen that. It's possible you have one but it's been turned off maybe. From the home screen you can click the 3 dots dropdown in the top right corner . From there select 'adjist dashboard layout's and see if the Tools menu has be unchecked and turned off.
is there a reason to stick with a spring mounted bed when you have a probe? would it not be better to just mount it with spacers and just use a bed mesh?
Yea that's a great point. once you have a probe and you've trammed it properly , stabilizing the bed is a great way to keep consistent prints. It's not something I do, but it's a great idea and I could see the benefit for people who do decide to go that route.
Great video again thanks for the content my only crit is that I would make the screw 1 the one thats is attached to the bed heater cable and sensor probe if your bed is setup like that makes it so your adjustment knobs doesn’t bottom out easily.
Steven that's a great idea, where we you when I was making this video lol Seriously that is a very great idea and I'll keep it in mind when talking about this in the future.
Glade you like that I’ve watched the video on how to setup a bed mesh and bltouch in klipper a million times I keep all these videos in my list of necessary how tos because they’re so clear. Thanks a bunch I would be pulling my hair out if it weren’t for the clear videos
The Neptunes are a weird breed, and I am not 100% sure how Elegoo decided to implement everything. Another user posted there config setups for various Neptune printers. So check out some of the other comments and see if it can help you.
I believe the 4 pro uses a proximity probe and not a pin style probe. So you'd want to line that small probe up with the screws just like I did in this video. I wish I was more familiar with the Pro 4 but I don't have any hands on experience.
HI, Using the newest Orca slicer but it doesn't have the tools menu?? I am wondering if this version from Elegoo has removed it so this option isn't available. It would be a great addition to speed up leveling as the bed i have is a real beast to get flat!! Thanks
Hi all, I have just purchased a N4M and would love to use this on it. Is there any video showing how to use it on a N4M. I see in the comments that the centre is selected as the first probe point and then add other points....how do you do this? When the mesh is created is there a way to save this as the new default? Thanks in advance.
Hey Aaron I'm not too familiar with what an N4M is, can you explain? During the setup of this macro you can make whichever probe point, or 'screw', you want to be the first one tested.
I have a Creality CR20-Pro using Marlin. I'm still trying to figure out how to upgrade to Klipper, but I also have no idea what Leonardo is, or what it does.
I don't remember where/how I mention it in this video, but Leonardo is just the gave this particular printer. And then I made a color theme of prints to match it to the Teenage Mutant Ninja Turtles character lol
Unfortunately Klipper is only setup so that it can be operated with a probe. There are manual routines that you can use to help expedite the process of bed leveling without a probe, but screws_tilt_adjust won't be afforded to you. If you want to look at some manual ways I have a video on creating a manual mesh and it goes over some of those concepts. th-cam.com/video/yNoPNzFKXvU/w-d-xo.html
Hey, I love your tutorials. You are great in simplifying the information. Can u do a guide on z-tilt too? I have and Ender 3 with KevinAKaSam Dual Z belted mod, he was encouraging it's use in one of our brief chat but I can't find a good guide here on YT. I only learned to 3D print the past 6 weeks and the learning curve is quite steep. Thanks!
Z tilt was a topic that I was looking forward to covering. My T500 makes great use of z_tilt with its huge bed so I was thinking of using that as a focus.
If you don't want to switch to Klipper, this feature is available in Marlin as ASSISTED_TRAMMING. You possibly would need to compile a new version though.
but why wouldn't you want to switch to Klipper?? lol I'm kidding but I thought Marlin also had a similar routine I just haven't seen it implemented. I appreciate you mentioning this, and thanks for watching.
Same! This has turned bed leveling into a 3 minute pain free affair, where before I'd be hunched over my printer for minutes at a time. This is a real no brainer. Thanks for watching and for leaving a comment !
Thank you for trusting in me.. and Klipper! The tools are all there for us we just need to learn how to use them. I appreciate you letting me know I helped !
I can't get my probe over the screws on the left side since my probe is attached off to the right of my head to the point that I reach the end of the X axis. Is there another suggested way or method ?
No, if you can't get your probe directly over the screws , just get the probe as close as you can and use those numbers. It doesnt need to be exact, just close.
There's some debate on whether to heat the bed or keep it cool. Obviously under heat the bed will expand and change its shape (to a degree). Heated is also the condition that you will be printing this on. That being said I prefer to perform all my bed leveling/meshing operations without heating. Whichever you decide I would just recommend using that method throughout. So if you're heating it make sure to heat it for all bed related calibrations (level, probe, mesh, etc).
I'm not too sure what you're asking. Using a non Klipper environment (like Marlin) they have the ability to direct your print head and probe to exact locations in series. Which would allow you to adjust each corner. Having the probe take results and give you realtime data might be a bottleneck there but I'm sure if you spent enough time you could make it work.
I've been wanting to make this video for a while so thanks for watching! I also appreciate you buying me some ☕!!! Anytime someone does that I'm truly touched, I appreciate the kindness. Stay tuned though, more Klipper videos to come :)
I just got mine ender 3 v2 bl touch setup with mesh leveling and succeed from the first try! I definetely gonna improve printer with that technique and dual z.
Awesome to hear! Those printers are capable of amazing things and it only takes a few tweaks from us to get there. Glad this was able to help you on the way!
I'm not sure I understand what you mean by improve the y axis? Are you looking for stability or smoother operation? With my ender 3 I never did any upgrades to the bottom rail. I know some people have tried linear rails but I never went that route.
A lot of people are of the mind to use whatever the best EI values are for the y axis. The idea behind that is because the Y will change over the course of a print because a model is slowly being deposited on it. Ultimately tuning your max acceleration outside of input shaping is the best way. I'll have a video on that process very shortly !
It will depend on what printer you have. Most printer manufacturers will sell new bed sheets direct from their website. You can also find comparable or even better bed sheets from third party companies through Amazon or AliExpress. Just make sure you get the correct size for your bed.
I just migrated my original Ender 5 to Klipper, the rest of the printer is stock, aside from adding a CR touch and bed supports. Subtle differences, but enough to make me decide to keep it as klipper for now :) The only thing I am really having issues with is the Z-offset. This is one place Marlin seemed to be more stable. I seem to need to constantly adjust the Z-Offset to get that first layer right. Any suggestions?
One thing to remember when adjusting z offset with Klipper is to always save it after the print has finished. Otherwise you will be always adjusting off of a previous adjustment and you'll be driving yourself nuts. Usually my workflow is to adjust z offset outside of printing, and then using my front end (Fluidd) I'll adjust the z offset under the Tool option. When I am satisfied that it's good I'll let the print finish but then afterwards I remember to save that value using the disc icon that is under the Tool section. That ensures the value you just calibrated will save and persist between prints.
Lol I know! I always try and remind everyone you can print just fine on a bed with some variance. Usually I shoot for a variance (when creating a bed mesh) of 0.2. I have printed on some beds with an even larger variance with success, so don't spend too much time getting this just right lol
Unfortunately Elegoo has configured some of the front facing Klipper options which creates head aches for users. I don't own an Elegoo but I normally you can find the gear (or burger) icon at the top right of the home page. Then from there you can configure the home page setup which allows you to hide or make visible different sections. Just find the Tools section and add it to the home page from there.
hi, i've learnt too much things from you thank you. i have e3s1 pro with klipper. my bed is very very warped, around 0.6 gap in the middle. i used to put aluminium foil under it but when i realize that there is "x twist compensation" i wanted to try but it doesnt help. can you make a video about it? if it works, im sure hundreds of ppl will have a flat bed and good first layer. my problem is it seems it doesnt save the compensation. everytime i do it again after save config and restart, z offsets are same for where i adjust the nozzle. so same bed mesh everytime.
Thanks again for the comment! I answered you in your previous one to find out exactly what your issues was. In the Manual Bed Mesh video comment section 👍
Hello Leo I have converted my Ender 3 to Ender extender 400x400x500. Also installed dual z drive and direct drive. What would you suggest in the order to tune and calculate? Thanks Ps I am running klipper
Well in general I would start by suggesting all the base calculations you should normally perform: -PID tune hot end and bed. -Adjust rotation distance for extruder (used to be esteps) -Level bed -Creaye a bed mesh -Pressure advance -Input shaping After that you'd want to find out what you max flow rate is for your hot end. These are all 'in general' calibrations though, I don't know there's anything specific you'd need to calibrate for the extender.
This is the bane of my 3D printing experience. My Creality V3ke to this date will not correctly compensate for the created mesh. I've tried everything. Creality even send a complete bed replacement and still no luck. The auto calibrate will just not work. I wish I had the "screws" option. I have to trim the bed using razor blades which work surprisingly well and stick to the magnetic base.
The KE I believe is the printer that has Klipper installed, although I'm not sure how neutered it is thanks to Creality. If it does have Klipper you should be able to get a view of the bed mesh visualizer and see where your bed is at its worst and try to compensate.
Hey Leo, can I use this for an Elegoo Neptune 4 Max? It has six adjustable wheels on the plate and how would I label the other two in the middle for the code? I’ve been having a hard time getting a good bed level on this machine. Been trying for weeks to tell you the truth.
Hey sorry for the late reply, but you are absolutely correct! You can just add screw5 and screw6 to the macro and plot the correct coordinates and it will all work. I would keep the screws numbered in order 1-6 starting from the front left and traveling clockwise (which would make screw6 the middle left screw... if that makes sense). I hope this helps and is not too confusing. Let me know if you need any more assistance!
Ramin, I can't tell if you're messing with me or not lol right now I am not sure where/if any support exists for Lidar in Klipper. My hope is that someone can get load cells working properly, that would be a huge step forward.
Woah! I didn't know it was rocking lidar. I know it has that awesome noze probing system. I don't know if Klipper has integration with lidar yet, but there's got to be a way that Creality is implementing it. I'm going to take a closer look at this. Great question, thanks for sharing .
You have some amazing videos Leo. Have helped me so much with my Aquilas. I ran the calibration, first time deviation 1.42. made adjustments, second time through even worse, 1.72. Not sure what I am doing wrong.. I'll keep trying and also check Z offset of probe?
Well first thanks for the vote of confidence , means a lot. For the calibration it could be a couple things. First you have to remember as you make adjustments to one side of the bed, the other will be affected as well, so sometimes this will take a few passes to get it right. Second , double check your spinning the knobs the correct direction. I know I've been guilty of turning these the wrong way myself. Just double check the rotation and give it another shot. Good luck and I hope this helps .
Weldone Leo, another great video! so much better explanation than some other youtubers. looking forward to the nest installments and my bugging you in discord lol.
That's high praise my man! Thank you so much. The Discord is crazy now, so many awesome 3d printers sharing all of their projects. I can't wait to be bugged lol thanks
Not only was it helpful it was tempting lol I've been wanting to print in larger build volumes lately and this showed up at just the right time. Unfortunately it doesn't look like me owning it will be in the future, but you never know, maybe they'll reach out to a lowly TH-cam channel for support 😂
@@PrintsLeo3D Cool.. I was hoping they would do a smaller version so Us mere mortals could afford it and have the room for it? I thought a 600 mm square version of the core xy klipper called Say" OrangeStorm Mini " Would do well at say $599 then more could buy it. I will send Elegoo my idea worth a try! 😁
Within the screw_tilt_adjust macro, you can add all the screws and positions you have. So while I am only using screw1-screw4, you can add screw5 and screw6. This will cause the printer to also park over those screws and perform the calibration.
Yea I had never ran into this either. Luckily we have some really awesome people here on TH-cam and on the Discord who were able to verify this works. Good luck and I hope this gives you a silky smooth bed level!
At 10:16 the document say its must be the nozzle over the screws But you said in the beginning the position must be the one of the Probe, I'm confused 🤔
That sentence can be a little confusing but what the document says is " determine the nozzle coordinates such that the Z probe is above the screws..." So it's telling us to position are probe over each adjustment knob and record the coordinates. Klipper does have another routine called simply 'bed screws'. That asks you to get the coordinates of the nozzle over the screws, and then for operation it moves the nozzle above each screw for manual leveling. I go over that method in detail in my Manual Mesh video. I hope this explanation cleared that up but if not let me know.
Can this method be used without a probe? I have a cr10 smart that only has the strain guage, the board is not compatible with a bl touch and i dont want to swap out a perfectly good board.
Absolutely! If you're using that strain gauge as the bed probe it will work just the same. All you would do is love the nozzle up over each bed screw, use that location, and the operation should work just the same.
@@PrintsLeo3D awesome, I was hoping that was the answer. I've been trying to calibrate and dial in my printer since getting the sonic pad 3 months or so ago... has not been an easy or fun task. I just redid my pressure advance with your video. I think I'm getting closer now.
Good to hear it. That Sonic pad can be an easy way to enter Klipper, but it sort of puts some barriers between you and Klipper which can end up being detrimental to getting your printer locked in. Hope you sort it all out and I'm happy to help however I can.
What is the point of this if I have a BLTouch? Isn't my bltouch doing all the heavy lifting? I can only think of stepper longevity from not having to move the Z axis up and down so much. If I don't care about that, should I just avoid this?
This is a great question and a very common misconception. Both of these techniques work hand in hand in order to give you a great first layer. Bed screws adjust helps to align the nozzle and the bed along the same plane. This is commonly referred to as leveling. The bltouch does not level. It really is just a measuring device. The bltouch takes height measurements of the bed and creates a mesh to use while printing. It doesn't really ever "level" the bed. Also the bltouch is only accurate within a small window of deviation (0.2-0.4mm), so the more "level" your bed is the more accurate the bl touch will be. In short the bl touch never 'levels' your bed, it takes measurements and tries to make your first layer flat. Bed screws adjust does level your bed, and in turn allows the bl touch to work optimally.
Yea if you can keep a nice stable surface, and if you're using some device to create a mesh and apply it while printing, the times you would need to level your bed can be few and far between. This method being so easy can have you running bed leveling way more often if you wanted, just for peace of mind.
That's so unfortunate. It's really starting to get upsetting the number of manufacturers that are taking advantage of what Klipper can offer, but then lock down it's full potential so they can call it their own "custom" versions. Hope you find a way to take advantage of this someday. Thanks for watching
That's a picture of the Qidi X Max hot end. The last video I did prior to this was a review for that machine, so the graphic was still fresh in my mind.
Oh wow that sounds like an awesome project. Here's the link to that hot end: qidi3d.com/collections/x-max-3-accessories/products/x-max-3-x-plus-3-x-smart-3-copper-plated-hot-end Good luck on your project , and let me know when it's done, I'd be happy to give it a try!
Funny someone else said the same thing yesterday! Basically just turn this thing into a complete cyborg and let it slice and start its own prints too - the next level! servos though ....that would be a cool project
I'm not too familiar with the Neptune max 4+ and it's probing system. If it uses just the nozzle as a probe than yes you would just put the nozzle over each of the screws. That printer looks awesome, and almost makes regret buying the T500 instead
It's up to you. This is a topic that can be up for much debate. I understand most peoples' stance that the bed will change its shape while heated, but I prefer to perform this calibration while it is unheated. In the end what I always recommend is to stay consistent. If you heat the bed while bed leveling, also heat the bed for z offset and bed probing.
I was planning on making one, but with all these new CoreXY machines some of the interest, and my drive, has sort of waned. I love the Klicky I have installed here and I would really like to make a video on it if I find the time. I would love to create a video that starts with a base bones Ender-style 3d printer and by adding a few mods turn it into something that can compete with even the newest 3d printers!
Great video, and very informative! My only issue with screw tilt that ive noticed is that with multiple adjustments you will notice the z height of screw one changes. Im happy you included the steps of adjusting the z offset. Nice work
You're absolutely right, and I lightly touched on it, but I probably should have added a little more. As we make the adjustments you'll notice that while screw 1 does start to move, all the screw positions will start getting within range of each other. Now of course this does move the screw 1 corner up, I think the other corners matching that will eventually leave us in a more desirable location. I appreciate your comment, I am going to add a section to the article on my website that mentions this. Thanks!
@PrintsLeo3D thanks for the response. Now, with that being said. This coupled with say an auto z calibration (is, voron sexbolt), then it's a great tool to use and becomes even easier. I'm hoping to not need it at all soon. I have a mercury one.1 that I'm considering doing quad gantry on with the z endstop probe.
You'll want to adjust your nozzle to that screw specifically. That would mean homing the printer, then navigating the hot end above that screw, and using a feeler gauge (I use a post it note) in order to get the gap between the nozzle and the bed just right. When I say 'just right' I mean there should be a decent amount of tenaion on the post it note when you move it between the bed and the nozzle. That will give you a great starting point.
@@PrintsLeo3D i appreciate the response, i might be going about this wrong, i put my hotend over screw 1 and i lower the Z axis, for me to get that drag i need to pretty much max out screw 1 and 2, which leaves my bed with 1 hell of a bow. definitely a struggle on the neptune 3 plus. thanks btw
@WNxSect if you're having to make such a gross adjustment for that one screw then maybe I'd recommend to change your "base" screw. If you just switch the coordinates up you can make the base screw the front right screw. For instance under screw 1 put the coords for screw 2, then for screw 2 the coords for screw 3, and so on and so forth. This might give you a better chance at a leveled bed without so much cranking.
I was going to setup z tilt adjust in klipper on a btt pad7 but have the 4.2.2 board in my printer, so I think I need something with drivers for each stepper like a btt skr. This might work for me untill i can put that all together. Trying to get this hero7 setup printed so i can install my sherpa mini and 5015 fans but every time i start a new print I have been having to step the z axis down .01 or .02. Something tells me i need to add something into my start print.cfg in orca but im at a loss right now!
For z tilt you will need individual steppers per Z motor, so they can adjust independently. For the constant z adjustments, I would recommend going back to basics and and performing a probe_calibrate, and then live adjusting during a print afterwards. But you need to make sure you are saving those adjustments at the end of each print using the save icon (small disc) that appears in the tool section near the live offset controls.
Yes that's a great idea! One of those "why didn't I think of this myself" sort of ideas lol awesome contribution, I'll keep this in mind going forward when talking with other people. Thanks !
Even a auto leveling 3D printer can sometimes be so far out of wack that manual leveling will improve your prints. I just made a bolt in dial indicator to probe my QiDi Xmax3 to near perfection. It prints way better than my other printers just like it. Think of a bed and auto leveling like speed bumps, the closer to level your machine is at base the less travel the machine has to move to compensate for the speed bumps. Cleaner prints even for auto leveling.
This isn't creating you a mesh, this is just using the probe to gather height data and tell you how to level the bed. This routine is something you'd do outside of printing to make sure your bed is level. Using the probe to create a bed mesh (and use it during the print) is something I go over in detail in my longer bl touch video. I linked that in the description and it's worth a watch. If this doesn't make sense let me know and I can break it down a little further
Thank you so much for this video. I, like many was struggling to get my bed level. Your explanation of this technique helped me get my bed variance from 0.5100 to 0.1625 which resulted in my best first layer ever. You earned my thanks and subscription.
Thank you so much! Bed leveling can be the bane of a 3d printers existence, but smart tools like this can help give us some power back! Glad this helped and thanks for the subscribe and the comment !
Oh man, I'm late to the party but this has solved all my issues. For anyone with a larger print bed with a set point in the middle (such as the Elegoo neptune 4 plus), set screw 1 as the very center of your bed - and add the additional other screws using the same format. (I have 6 screws, so 1 is set to the center of the bed and 2 through 7 are the other 6 screws) I wish i had found this a week ago!
Glad you found it! Klipper is full of so many amazing tools sometimes the hardest part is finding them. Great info about using multiple screws as well, there was some questions about that when this video first came out and this comment will help a lot of people!
Hi, first of all, great video, everything very clearly described and explained. I applied this method to my Elegoo Neptune 4 Max and added 2 adjustment points. The only deviation I made was not using a probe, I centered the nozzle above the 6 adjustment points. I ran the "Screws_tilt_adjust" tool 3 times in a row with the final result - at 5 points it was 0.1 and at 1 point 0.0, so I wisely left it at that. Afterwards I did a "Bed Level Calibration" test and it was perfect. From now on this is my way to level.
Many thanks for posting this method on TH-cam.
Thank you so much for taking time to write such a detailed comment and letting me know this worked. Much appreciated, I'm glad you found me and I was able to help!
Youre a Hero! I dont know why i stumble over this for so many years and why no "Big TH-camr" covered it so far, this is amazing!
Thanks to you i reliably get 0.1 on every screw now thank you so much! Ordered a acceleration sensor aswell to follow your guide and more videos from you!
Yea this can be a real game changer for people. It saves time and can be very accurate. I am happy you found me and I promise I will continue to be making content just like this that is aimed to help. Good luck and happy printing!
Your timing with this video is perfect for me Leo. About two weeks ago I finally got back into 3D printing with my self modified CR-10 after a four year pause (work and life got in the way). I loaded Klipper (had been running Marlin) after seeing all the features it adds and have been bringing myself up to speed on it. Bed leveling has always been a very time consuming thing for me. Your method and pace of explaining the process is perfect for me, you have another subscriber!
Thank you so much I love to hear it! Helping people enjoy their printers has been a huge goal of my channel. I think you chose right with Klipper, it has so many tools to help a printer from 4 days ago or 4 years ago get up and running smoothly. I'm glad you found me and I appreciate the subscribe and comment!
I´m not good at express myself, but man this channel has everything you need and want! Especially for a klipper newbie like me. I have been using both Maker´s muse and Teaching tech a lot in the past, but you Leo will defentliy be my "go to" in the future when I nned help with my 3d hobby. I really like the way you describes everything in detail, and not just a "paste and copy what I do on the screen" channel.
Thank you so mush for the help Leo.
Oh wow thank you so much!! It takes me a while to make these videos, which is unfortunate, but it's because I spend a lot of time making sure the flow of the information is right (as well as the info itself lol). It's great hearing that these sort of videos are paying off for people because it makes all the time worth it. Thank you!!!!
Your videos are fantastic. I find that after watching your videos on a specific topic, I don't need to consult any other sources online. Your Klipper videos are reminiscent of Joshua Bardwell's FPV videos. Keep up the excellent work!
Woah !! Thank you so much! It really feels amazing when someone finds my stuff useful enough to leave such an awesome comment. Thank you much!
😆 I can do it with my eyes closed now but when I first got into the hobby 3 years ago bed levelling was the bane of my existence. If it wasn't for your video on bed levelling and z-offset I probably would have quit.
Zoomy keep your eyes on the road!! Lol I'm happy you stayed because this community is all the better for it, including all the tots you helped with a long with Fedor for the holidays. Thanks
@@PrintsLeo3D you 2 guys keep me sane 😆
@@PrintsLeo3D maybe next year we'll do a joint venture for the Toys4Tots. The more the merrier right?
If you remove the PEI sheet from the bed, you can very easily see the little indentions for exactly where the screws are. I even marked mine with a sharpie to make seeing them even easier. Once you have the locations noted, you can easily put the PEI (or whatever build plate you're using) back on and continue the process.
Scott!!! What a great idea. I didn't even think about that. There are some beds (like my original Aquila) where I had to place the magnetic on myself, so there aren't any screws visible, but by and large I think your technique would work like a charm! I am adding a few addendums to this video and this info will definitely be part of it! Awesome suggestion, I appreciate you contributing.
Thanks! Even as a noob, I was able to get real close using the paper method but this is so much easier...especially if you want to check level periodically. Subscribed!
Yea the paper method is tried and true , but is tricky and time consuming. This is so quick and easy it almost feels like cheating! Thanks for watching, commenting, and subscribing!!
ok...this worked awesome. just have to remember to home before each use. bed mesh variance is 0.277 after just 3 times...
never had this😁 thank you
That's awesome ! This is such an amazing tool to have access to, I'm just happy to be able to share the process with people!
You are doing an awesome job on your videos. I bought a Klipper Pad 7 watched a few videos and was lost pretty early. I decided to watch your video and boom up and running. Thank you so much.
I'm happy to help you get back on track! I actually have a BTT Pad 7 sitting in the box. I wanted to do a video on it a few months ago but never found the time. Maybe it's time to break it out!
If you get the accelerometer working please do a video on that. I followed what little instructions BTT has on it but no luck. Thanks again
I think someone in the Discord was having issues with it too, so it's worth me looking into. I'll let you know .
@@PrintsLeo3D that would be awesome. I just dove into the klipper world so my knowledge is very limited.
You the man. Tought me everything I know klipper pretty much. Huge thanks
12:20 Thank you for showing how to check the screw size. Everyone else just skips over this.
Omg, thank you! Was just thinking the other day, why can't I just use my bed probe to tell me exactly how much to turn the screws instead of doing it manually? 😂 Thank you, and the algorithm for suggesting this. I have a Sonic Pad and had no idea this feature was in Klipper!
(Also, pst, one minute on a clock is 6 degrees, not 1... 15 minutes is 90 deg.)
This is such a convenient feature, and I wish you luck when adding it. I know some users that have had issues with the Sonic Pad in general. Hopefully the addition of this macro is 1-2-3 for you. If not let me know and I'll see how I can help!
Thank you so very much for this, think this is your first video I’ve seen and I’ve just done it. Leveled my screws now just to test its worked, if it has thank you so very much.
I've been having such a time bed-leveling. Thanks for the tutorial, it's really helped!
Thank you for this. This makes learning 3d printing as hobby much more enjoyable. Just did this on my Neptune 4 Pro, Got it down to 00:00 on everything.
Woah! That's better than I have ever been able to do! I'm glad this helped you and I appreciate you giving my video a watch.
i got my corners all down to 1 minute except one side which i got 2 on using this video with a tolerance of .140. thank you!!!
Those times are awesome! Good luck and happy printing!
Awesome videos! Should I do:
"BL Touch complete setup for Klipper! Maximize your probed bed mesh!"
or this video first?
Thanks! The BL touch video is long, but it's where I would recommend to start. It goes over how to make sure your bl touch is setup correctly which is the baseline for a lot of these calibrations.
@@PrintsLeo3D good to know, I'll start with that video, and then follow up with this one. Thanks for the help ❤
@Juan-um7du happy to help!
Thanks so much for sharing this method. So much easier. I've noticed the wheels on my Neptune 4 Pro have 10 bumps on them, so allowing for each being 6 minutes apart makes it extremely easy to turn them just the right amount.
Oh wow that's great! The knobs on the Creality style machines have so many grip areas that it is hard to track. It would be cool to see a printable option that mirrors the knob style that Elegoo employs, or make it even more specific to this calibration!
You mentioned to just find an empty space in the config file. Does it matter if this is in the beginning or end or after a particular section? I have several empty at the beginning and didn’t k ow if it would be okay to place it first. Thanks
Great question and the answer is, it doesn't matter at all. So whatever is easy for you, and makes sense for your own organization is the best option!
Txs for this video, i completly fixed my issues with leveling🙂
Great tutorial, it was WAY easy than "manual" correction ! Thx
Happy to help! This calibration is really such a time saver and I think it helps increase accuracy that comes from rushing through it when you do it yourself. Thanks for watching and commenting!
With much appreciation but the workflow has changed the last 2 years. I think it’s time to follow the new technologies and advancements. But thanks for the effort to explain very thoroughly.
Hans I appreciate the feedback I wasn't aware of a change. Is this the the base Klipper operations? I'll check out the documentation.
I implemented this as soon as I upgraded my CR-10 v2 to Klipper. It's a great feature making tramming the bed so much easier and faster.
Yea this is one of those small additions that can make a huge quality of life difference. I appreciate you leaving a comment !
I have an ANETH A6 and a TRONXY 5sa
Should I replace/buy another piece of hardware or I can just upgrade with Klipper to get better performance?
Alexandre, I don't have any hands on experience with either of those machines, so I only can give you advice through what I have heard and have researched. I know the Anet line has somewhat of a dark cloud over it due to performance issues. I don't know if those stories are true or untrue (or likely somewhere in the middle) but from the quick searching I did I was unable to find a suitable Klipper configuration file.
For the Tronxy I know a lot of people who have Klipperized them. I couldn't say for your exact model but I was able to find one github repo that had some instructions:
gist.github.com/cab404/b7bcbb0cd592a14515493694719de59b
In my opinion flashing Klipper on any 3d printer is an upgrade, but it will require some new hardware. You will need a 'host device' to run the brains of Klipper. That device can be anything that can run Linux (a raspberry pi, tv box, Inovato Quadra, or an old PC). From there you would need to just find a configuration file for the 3d printer you want to use with Klipper (I found something for the Tronyx but didn't come up with anything for the Anet, but that does't mean it doesn't exist). It's up to you the route you want to take, but either way I believe Klipper is an upgrade to most all of the base firmwares if you are willing to give it some time and some research.
Thanks @@PrintsLeo3D for your quick response.
Sure Aneth A8 and A6 got a lot of issue with overheating/fire in the past. I've instal 2 mosfets and never got any trouble in last 5 years. And today only a broken fool would buy a new A8-A6 unit because there is better option on the cheap side.
I'll look for the tronxy, I do have an old laptop. I would love to include a accelerometer sensor and get BambuLab speed on the cheap...
I can dream.. I know...
This is an awesome how to Leo. This type of tool could seem so complicated, but after a watch, you’ve made it so clear that it seems silly not to use it. Well done.
Thanks Fedor! Yea this changed the game for me, I could just run this occasionally to make sure the bed was locked down instead of going through the normal leveling process. Thanks for dropping a comment, you the man !
100% correct, great viddeo
I'm loving the Klipper how-to series! I'd like to see a video on setting up Z_TILT
That's a great idea! I don't know how many people have dual stepper drivers to be able to use z_tilt, so it will probably be a little further down the catalogue. I want to get a few out there about max accels/ speeds and using KAMP, but I'll add it to the list!
Thanks for this, i followed it and all my screws were under 6minutes from my first run. On to the next thing to help with better prints.
This is what my first run said lol. guess i did a pretty good job without this.
// front left screw (base) : x=60.2, y=9.6, z=-0.01000
// front right screw : x=314.2, y=9.6, z=0.02250 : adjust CCW 00:04
// middle right screw : x=314.2, y=142.6, z=0.03000 : adjust CCW 00:05
// middle left screw : x=60.2, y=142.6, z=0.01250 : adjust CCW 00:03
// rear left screw : x=60.2, y=275.6, z=0.03000 : adjust CCW 00:05
// rear right screw : x=314.2, y=275.6, z=-0.01500 : adjust CW 00:01
Yeah, i used to have bed leveling now it honestly feels good to know my stuffs on point. its alot better now that i got klipper.. doesnt feel like im going in blind anymore
Yea I know that feeling. You can just hit print and walk away without worrying. Don't forget to periodically level it though, preventative maintenance 😂
You have been a great resource for my Klipper transformation thank you!
Thank you so much, that's really awesome to the hear! That's the goal, help more people transition to Klipper and get some more enjoyment out of their 3d printers! Thanks for taking the time to comment it made my day.
Awesome walkthroug for beginners and even advanced users :)
one tip is to messure the thread (12:17) with the calipers paralell to the bed its much more easy =)
Thank you so much! A lot of the reason for me measuring it that way was for filming purposes lol trying to find the right angle for that can be tough. Great advice though and I thank you for taking the time to help me out! Thanks!
Do machines like Elegoo Neptune 4 that have "auto bed leveling" work with this method? I believe they have some sort of sensor to test the bed level built in - not an addon.
thanks to this video i got my adjustment to 0:00 - 0:01 thanks a lot
That's great! I don't think I've ever gotten my bed that well in balance. Thanks for watching and I'm glad it helped.
Great vid, thanks, did want to note printers like the Neptune Max have the center bed (home) as the main reference, not screw 1.
Thanks sm I appreciate it! I know there have been a lot of users with Elegoo machines that have helped contribute to this video by leaving helpful comments like this. So thank you and everyone else who helps make this video and comment section informatibe.
Got some really nice results from this - thank you!
That's great! My goal with all these videos is to help however I can. I'm glad this video was able to give you something worthwhile. Thanks for watching and commenting.
New to the 3D printing world...Just came across this video and it looks very promising and easy to do. Question, for a printer that has 6 adjustment knobs what would the text commands be for the config file? I have a Neptune 4 Max and along with the knobs in the corners there's one in the middle on the left and right side of the bed. Would it be 'screw3_name: middle left screw', 'screw4_name: middle right screw', 'screw5_name: rear right screw', 'screw6_name: rear left screw' and confirm if so? Many Thanks and very thourouh on this guide!!
Alex, happy to have you in the 3d printing community! I have been getting a lot of questions about the Neptune Max 4 lately, and unfortunately I am not more familiar with the printer (besides seeing it in action at East Coast rep Rap in Maryland this year). As to your main question can you add additional screws to screws_tilt_adjust, and the answer is 'I don't thinks so'. I honestly hadn't heard of a bed with more than four screws, and lately beds are moving away from screws and going to a more 'fixed in place' structure. That being said when I get a free printer I will try and add some additional screws and see if Klipper accepts it. There's also the math that is involved with tilting a bed in quadrants, and I am not sure if Klipper is setup for a number greater than four. Let me do a little research and get back to you. Again, happy to have you aboard and I am glad you found my channel!
@alexautry5845 Your naming is correct but the numbering is out of order. I tried this and it worked, you can watch the order as it runs to confirm.
LF 1, RF 2, LM 3, RM 4, LR 5, RR 6
Great video @PrintsLeo3d
@@DODGE1MOPAR AWESOME! Thank you for your response and the clarification! I had guessed which order after the Front left and front right lol. I'll try that when I get home and let you know. @DODGE1MOPAR, thank you again! I'm assuming you have an Elegloo N4M as well?
Woah!! I cannot believe Klipper allowed for adding more screws!! I'm sorry I never got around to checking, I honestly just forgot. Thank you @dodge1mopar for doing the work and finding out! This is great to know.
@@DODGE1MOPAR @PrintsLeo3D did you do this method on a Neptune 4 max? because i'm getting this error message when attempting.Which i get the same error message when attempting to do a mesh. "No trigger on probe after full movement" is the error message i'm getting.This printer is using some type of proximity sensor for metal because Elegoo says do not swap out mats that it has to be a metal mat for the sensor to work. The Kobra 2 Max is using a proximity sensor for sure just havent heard anything stated you can't. So, if anyone knows what i'm doing wrong or how to use this method with these types proximity sensors, please chime in.thanks in advance!!!!
I do not have a tools dropdown menu on fluidd ...Any ideas?
Pat, I've never seen that. It's possible you have one but it's been turned off maybe. From the home screen you can click the 3 dots dropdown in the top right corner . From there select 'adjist dashboard layout's and see if the Tools menu has be unchecked and turned off.
Thanks I'll give it a try
FM freaking magic it showed up woohoo thanks
Great to hear it works! Have fun and good luck !
is there a reason to stick with a spring mounted bed when you have a probe? would it not be better to just mount it with spacers and just use a bed mesh?
Yea that's a great point. once you have a probe and you've trammed it properly , stabilizing the bed is a great way to keep consistent prints. It's not something I do, but it's a great idea and I could see the benefit for people who do decide to go that route.
Great video again thanks for the content my only crit is that I would make the screw 1 the one thats is attached to the bed heater cable and sensor probe if your bed is setup like that makes it so your adjustment knobs doesn’t bottom out easily.
Steven that's a great idea, where we you when I was making this video lol Seriously that is a very great idea and I'll keep it in mind when talking about this in the future.
Glade you like that I’ve watched the video on how to setup a bed mesh and bltouch in klipper a million times I keep all these videos in my list of necessary how tos because they’re so clear. Thanks a bunch I would be pulling my hair out if it weren’t for the clear videos
Thank you for this. What happens if you do not have the TOOLS menu drop down available to you ?
Elegoo Neptune 4 Plus....
The Neptunes are a weird breed, and I am not 100% sure how Elegoo decided to implement everything. Another user posted there config setups for various Neptune printers. So check out some of the other comments and see if it can help you.
@PrintsLeo3D sorry another quick question my printer has 6 knobs,, do I just add 2 more "screw" lines of code? screw5....? screw6
Never be sorry, I love these questions. And yes, you're correct! Just add two more screw and plot their locations like you did the other 4 👍
where is the touch probe on the neptune 4 pro?
I believe the 4 pro uses a proximity probe and not a pin style probe. So you'd want to line that small probe up with the screws just like I did in this video. I wish I was more familiar with the Pro 4 but I don't have any hands on experience.
@@PrintsLeo3DThank you, I was going to ask the exact same question, but now I know I dare to try this even though the Neptune 4 have prox-probe.
I am new to klipper. Very interesting information. Thank you.
Glad to be able to shed some life on what this firmware can offer. There is a lot more to Klipper too! This is only scratching the surface.
HI, Using the newest Orca slicer but it doesn't have the tools menu?? I am wondering if this version from Elegoo has removed it so this option isn't available. It would be a great addition to speed up leveling as the bed i have is a real beast to get flat!!
Thanks
Hi all, I have just purchased a N4M and would love to use this on it. Is there any video showing how to use it on a N4M. I see in the comments that the centre is selected as the first probe point and then add other points....how do you do this? When the mesh is created is there a way to save this as the new default?
Thanks in advance.
Hey Aaron I'm not too familiar with what an N4M is, can you explain? During the setup of this macro you can make whichever probe point, or 'screw', you want to be the first one tested.
@@PrintsLeo3D thanks for the reply, sorry i should have mentioned that the N4M is the Elegoo Neptune 4 Max.
I have a Creality CR20-Pro using Marlin. I'm still trying to figure out how to upgrade to Klipper, but I also have no idea what Leonardo is, or what it does.
I don't remember where/how I mention it in this video, but Leonardo is just the gave this particular printer. And then I made a color theme of prints to match it to the Teenage Mutant Ninja Turtles character lol
Can klipper screw tilt adjust also be applied to a manual bed adjustment or does it require a probe? Thanks 👍🏻
Unfortunately Klipper is only setup so that it can be operated with a probe. There are manual routines that you can use to help expedite the process of bed leveling without a probe, but screws_tilt_adjust won't be afforded to you. If you want to look at some manual ways I have a video on creating a manual mesh and it goes over some of those concepts. th-cam.com/video/yNoPNzFKXvU/w-d-xo.html
Hey, I love your tutorials. You are great in simplifying the information. Can u do a guide on z-tilt too? I have and Ender 3 with KevinAKaSam Dual Z belted mod, he was encouraging it's use in one of our brief chat but I can't find a good guide here on YT. I only learned to 3D print the past 6 weeks and the learning curve is quite steep. Thanks!
Z tilt was a topic that I was looking forward to covering. My T500 makes great use of z_tilt with its huge bed so I was thinking of using that as a focus.
@@PrintsLeo3D looking forward to it. :)
If you don't want to switch to Klipper, this feature is available in Marlin as ASSISTED_TRAMMING. You possibly would need to compile a new version though.
but why wouldn't you want to switch to Klipper?? lol I'm kidding but I thought Marlin also had a similar routine I just haven't seen it implemented. I appreciate you mentioning this, and thanks for watching.
omg...this is what I need!
Dude this has saved me so much time.
Same! This has turned bed leveling into a 3 minute pain free affair, where before I'd be hunched over my printer for minutes at a time. This is a real no brainer. Thanks for watching and for leaving a comment !
Thank you very much for helping get my E3pro to the next level.
Thank you for trusting in me.. and Klipper! The tools are all there for us we just need to learn how to use them. I appreciate you letting me know I helped !
I can't get my probe over the screws on the left side since my probe is attached off to the right of my head to the point that I reach the end of the X axis. Is there another suggested way or method ?
No, if you can't get your probe directly over the screws , just get the probe as close as you can and use those numbers. It doesnt need to be exact, just close.
Thank you for providing this knowledge, I am testing it on my ender 5 plus, just one question: the bed must be heated or work cold.
There's some debate on whether to heat the bed or keep it cool. Obviously under heat the bed will expand and change its shape (to a degree). Heated is also the condition that you will be printing this on. That being said I prefer to perform all my bed leveling/meshing operations without heating. Whichever you decide I would just recommend using that method throughout. So if you're heating it make sure to heat it for all bed related calibrations (level, probe, mesh, etc).
Would it be possible to run the code used here without the klipper environment by inputting your mesh results 'manually' each time you run it?
I'm not too sure what you're asking. Using a non Klipper environment (like Marlin) they have the ability to direct your print head and probe to exact locations in series. Which would allow you to adjust each corner. Having the probe take results and give you realtime data might be a bottleneck there but I'm sure if you spent enough time you could make it work.
Thanks man!! this was a huge improvement to my set up on an Ender 3S1 and 3 v2. Awsome content!
This is a great tutorial, thanks a lot!
I've been wanting to make this video for a while so thanks for watching! I also appreciate you buying me some ☕!!! Anytime someone does that I'm truly touched, I appreciate the kindness. Stay tuned though, more Klipper videos to come :)
I just got mine ender 3 v2 bl touch setup with mesh leveling and succeed from the first try! I definetely gonna improve printer with that technique and dual z.
Awesome to hear! Those printers are capable of amazing things and it only takes a few tweaks from us to get there. Glad this was able to help you on the way!
@@PrintsLeo3D What are kind of ways to improve y axis?
I'm not sure I understand what you mean by improve the y axis? Are you looking for stability or smoother operation? With my ender 3 I never did any upgrades to the bottom rail. I know some people have tried linear rails but I never went that route.
@@PrintsLeo3D What i looking for is the acceleration and stability with better result in input shaper
A lot of people are of the mind to use whatever the best EI values are for the y axis. The idea behind that is because the Y will change over the course of a print because a model is slowly being deposited on it. Ultimately tuning your max acceleration outside of input shaping is the best way. I'll have a video on that process very shortly !
Where can I get a replacement bed sheet? The nozzle gouged it trying to print the first print after leveling.
It will depend on what printer you have. Most printer manufacturers will sell new bed sheets direct from their website. You can also find comparable or even better bed sheets from third party companies through Amazon or AliExpress. Just make sure you get the correct size for your bed.
I just migrated my original Ender 5 to Klipper, the rest of the printer is stock, aside from adding a CR touch and bed supports. Subtle differences, but enough to make me decide to keep it as klipper for now :)
The only thing I am really having issues with is the Z-offset. This is one place Marlin seemed to be more stable. I seem to need to constantly adjust the Z-Offset to get that first layer right.
Any suggestions?
One thing to remember when adjusting z offset with Klipper is to always save it after the print has finished. Otherwise you will be always adjusting off of a previous adjustment and you'll be driving yourself nuts.
Usually my workflow is to adjust z offset outside of printing, and then using my front end (Fluidd) I'll adjust the z offset under the Tool option. When I am satisfied that it's good I'll let the print finish but then afterwards I remember to save that value using the disc icon that is under the Tool section. That ensures the value you just calibrated will save and persist between prints.
Thanks Leo! I did as you showed on my Elegoo Neptune 4 Pro and it worked out great!
Happy to hear it! This technique has been invaluable for me and it's great to hear other people enjoying it!
I have the same printer, did you use the stock sensor?
You sir are awesome at testing my ocd!
Lol I know! I always try and remind everyone you can print just fine on a bed with some variance. Usually I shoot for a variance (when creating a bed mesh) of 0.2. I have printed on some beds with an even larger variance with success, so don't spend too much time getting this just right lol
I have an Elegoo 4 pro. I don't have the "Tools" menu to the right of the "Motors off" menu. Is there a way to add this Meny to the printer.cfg?
Unfortunately Elegoo has configured some of the front facing Klipper options which creates head aches for users. I don't own an Elegoo but I normally you can find the gear (or burger) icon at the top right of the home page. Then from there you can configure the home page setup which allows you to hide or make visible different sections. Just find the Tools section and add it to the home page from there.
hi, i've learnt too much things from you thank you. i have e3s1 pro with klipper. my bed is very very warped, around 0.6 gap in the middle. i used to put aluminium foil under it but when i realize that there is "x twist compensation" i wanted to try but it doesnt help. can you make a video about it? if it works, im sure hundreds of ppl will have a flat bed and good first layer. my problem is it seems it doesnt save the compensation. everytime i do it again after save config and restart, z offsets are same for where i adjust the nozzle. so same bed mesh everytime.
Thanks again for the comment! I answered you in your previous one to find out exactly what your issues was. In the Manual Bed Mesh video comment section 👍
Hello Leo
I have converted my Ender 3 to Ender extender 400x400x500. Also installed dual z drive and direct drive.
What would you suggest in the order to tune and calculate?
Thanks
Ps
I am running klipper
Well in general I would start by suggesting all the base calculations you should normally perform:
-PID tune hot end and bed.
-Adjust rotation distance for extruder (used to be esteps)
-Level bed
-Creaye a bed mesh
-Pressure advance
-Input shaping
After that you'd want to find out what you max flow rate is for your hot end. These are all 'in general' calibrations though, I don't know there's anything specific you'd need to calibrate for the extender.
Thanks so much for your time and knowledge
@@PrintsLeo3D
Of course, that's what I'm here!
Leo, Thank you very much for your macro that helps me level the bed on my Ender 5 Plus printer. Jeffrey
Jeff, glad I can help! This really makes this process so easy and so repeatable. Makes you wonder why we weren't using it sooner lol
This is the bane of my 3D printing experience. My Creality V3ke to this date will not correctly compensate for the created mesh. I've tried everything. Creality even send a complete bed replacement and still no luck. The auto calibrate will just not work. I wish I had the "screws" option. I have to trim the bed using razor blades which work surprisingly well and stick to the magnetic base.
The KE I believe is the printer that has Klipper installed, although I'm not sure how neutered it is thanks to Creality. If it does have Klipper you should be able to get a view of the bed mesh visualizer and see where your bed is at its worst and try to compensate.
Hey Leo, can I use this for an Elegoo Neptune 4 Max? It has six adjustable wheels on the plate and how would I label the other two in the middle for the code? I’ve been having a hard time getting a good bed level on this machine. Been trying for weeks to tell you the truth.
Hey sorry for the late reply, but you are absolutely correct! You can just add screw5 and screw6 to the macro and plot the correct coordinates and it will all work. I would keep the screws numbered in order 1-6 starting from the front left and traveling clockwise (which would make screw6 the middle left screw... if that makes sense). I hope this helps and is not too confusing. Let me know if you need any more assistance!
Amazing video!
Thanks a lot! I appreciate you commenting, it means a lot when someone takes the time !
Thank you! This really helped.
Excellent,
Can you let me know how to use my 3D printer Lidar using Klipper to level the bed
Ramin, I can't tell if you're messing with me or not lol right now I am not sure where/if any support exists for Lidar in Klipper. My hope is that someone can get load cells working properly, that would be a huge step forward.
@@PrintsLeo3D I am serious, The Creality K1 Max comes with LiDar and should be able to scan the bed
Woah! I didn't know it was rocking lidar. I know it has that awesome noze probing system. I don't know if Klipper has integration with lidar yet, but there's got to be a way that Creality is implementing it. I'm going to take a closer look at this. Great question, thanks for sharing .
@@PrintsLeo3D Thank you
I wish all your dreams to come true, thanks for the video
Thank you so much, that's so kind.
You have some amazing videos Leo. Have helped me so much with my Aquilas. I ran the calibration, first time deviation 1.42. made adjustments, second time through even worse, 1.72. Not sure what I am doing wrong.. I'll keep trying and also check Z offset of probe?
Well first thanks for the vote of confidence , means a lot. For the calibration it could be a couple things. First you have to remember as you make adjustments to one side of the bed, the other will be affected as well, so sometimes this will take a few passes to get it right.
Second , double check your spinning the knobs the correct direction. I know I've been guilty of turning these the wrong way myself. Just double check the rotation and give it another shot.
Good luck and I hope this helps .
Weldone Leo, another great video! so much better explanation than some other youtubers. looking forward to the nest installments and my bugging you in discord lol.
That's high praise my man! Thank you so much. The Discord is crazy now, so many awesome 3d printers sharing all of their projects. I can't wait to be bugged lol thanks
Hi Leo, I hope that link I posted for you about the new Elegoo OrangeStorm Giga 3D Core XY Huge Printer on Kick Starter was helpful?
Not only was it helpful it was tempting lol I've been wanting to print in larger build volumes lately and this showed up at just the right time. Unfortunately it doesn't look like me owning it will be in the future, but you never know, maybe they'll reach out to a lowly TH-cam channel for support 😂
@@PrintsLeo3D Cool.. I was hoping they would do a smaller version so Us mere mortals could afford it and have the room for it? I thought a 600 mm square version of the core xy klipper called Say" OrangeStorm Mini " Would do well at say $599 then more could buy it. I will send Elegoo my idea worth a try! 😁
I have a Neptune 4 plus which has 6 base leveling knobs, how do I account for that?
Within the screw_tilt_adjust macro, you can add all the screws and positions you have. So while I am only using screw1-screw4, you can add screw5 and screw6. This will cause the printer to also park over those screws and perform the calibration.
@@PrintsLeo3D thank you! I didn’t know I could just add stuff
Yea I had never ran into this either. Luckily we have some really awesome people here on TH-cam and on the Discord who were able to verify this works. Good luck and I hope this gives you a silky smooth bed level!
At 10:16 the document say its must be the nozzle over the screws
But you said in the beginning the position must be the one of the Probe, I'm confused 🤔
That sentence can be a little confusing but what the document says is " determine the nozzle coordinates such that the Z probe is above the screws..."
So it's telling us to position are probe over each adjustment knob and record the coordinates.
Klipper does have another routine called simply 'bed screws'. That asks you to get the coordinates of the nozzle over the screws, and then for operation it moves the nozzle above each screw for manual leveling. I go over that method in detail in my Manual Mesh video.
I hope this explanation cleared that up but if not let me know.
Can this method be used without a probe? I have a cr10 smart that only has the strain guage, the board is not compatible with a bl touch and i dont want to swap out a perfectly good board.
Absolutely! If you're using that strain gauge as the bed probe it will work just the same. All you would do is love the nozzle up over each bed screw, use that location, and the operation should work just the same.
@@PrintsLeo3D awesome, I was hoping that was the answer. I've been trying to calibrate and dial in my printer since getting the sonic pad 3 months or so ago... has not been an easy or fun task. I just redid my pressure advance with your video. I think I'm getting closer now.
Good to hear it. That Sonic pad can be an easy way to enter Klipper, but it sort of puts some barriers between you and Klipper which can end up being detrimental to getting your printer locked in. Hope you sort it all out and I'm happy to help however I can.
What is the point of this if I have a BLTouch? Isn't my bltouch doing all the heavy lifting? I can only think of stepper longevity from not having to move the Z axis up and down so much. If I don't care about that, should I just avoid this?
This is a great question and a very common misconception. Both of these techniques work hand in hand in order to give you a great first layer. Bed screws adjust helps to align the nozzle and the bed along the same plane. This is commonly referred to as leveling. The bltouch does not level. It really is just a measuring device. The bltouch takes height measurements of the bed and creates a mesh to use while printing. It doesn't really ever "level" the bed. Also the bltouch is only accurate within a small window of deviation (0.2-0.4mm), so the more "level" your bed is the more accurate the bl touch will be.
In short the bl touch never 'levels' your bed, it takes measurements and tries to make your first layer flat. Bed screws adjust does level your bed, and in turn allows the bl touch to work optimally.
I leveled my beds a couple of years ago, and never need to do it again except for nozzle and bed surface changes.
Yea if you can keep a nice stable surface, and if you're using some device to create a mesh and apply it while printing, the times you would need to level your bed can be few and far between. This method being so easy can have you running bed leveling way more often if you wanted, just for peace of mind.
Like the video and concept. unfortunately unusable on creality's version of klipper on the nebula smart pad.
That's so unfortunate. It's really starting to get upsetting the number of manufacturers that are taking advantage of what Klipper can offer, but then lock down it's full potential so they can call it their own "custom" versions. Hope you find a way to take advantage of this someday. Thanks for watching
What is the hotend using in the explanation for tramming?
That's a picture of the Qidi X Max hot end. The last video I did prior to this was a review for that machine, so the graphic was still fresh in my mind.
@@PrintsLeo3D I'll check out that review. It looks like a hotend that will for with a toolhead I'm designing
Oh wow that sounds like an awesome project. Here's the link to that hot end:
qidi3d.com/collections/x-max-3-accessories/products/x-max-3-x-plus-3-x-smart-3-copper-plated-hot-end
Good luck on your project , and let me know when it's done, I'd be happy to give it a try!
Thanks, very helpful.
It's my pleasure! Thank you for watching and commenting !
I would just use this feature for the satisfaction of seeing a .04mm diff on the bed level mesh from corner to corner :D
When you can get those levels it's a beautiful thing!
Hey's Leo, hope all yes well with you friend. Now lets add small servos to the screws nobs so klipper align it full auto! ;).
Funny someone else said the same thing yesterday! Basically just turn this thing into a complete cyborg and let it slice and start its own prints too - the next level!
servos though ....that would be a cool project
Dude, u are awesome! thanks for the advice!
If you're trying to do this on something like the Neptune 4+, would you just align the extruder tip with the bed springs?
I'm not too familiar with the Neptune max 4+ and it's probing system. If it uses just the nozzle as a probe than yes you would just put the nozzle over each of the screws. That printer looks awesome, and almost makes regret buying the T500 instead
Oh yea! Thanks a lot for your works.
Very welcome! Hoping this helps you enjoy Klipper and your printer more!
Do you need to heat the bed first?
It's up to you. This is a topic that can be up for much debate. I understand most peoples' stance that the bed will change its shape while heated, but I prefer to perform this calibration while it is unheated. In the end what I always recommend is to stay consistent. If you heat the bed while bed leveling, also heat the bed for z offset and bed probing.
Can you do a video on klackender or klicky probe installation
I was planning on making one, but with all these new CoreXY machines some of the interest, and my drive, has sort of waned. I love the Klicky I have installed here and I would really like to make a video on it if I find the time. I would love to create a video that starts with a base bones Ender-style 3d printer and by adding a few mods turn it into something that can compete with even the newest 3d printers!
Great video, and very informative! My only issue with screw tilt that ive noticed is that with multiple adjustments you will notice the z height of screw one changes. Im happy you included the steps of adjusting the z offset. Nice work
You're absolutely right, and I lightly touched on it, but I probably should have added a little more. As we make the adjustments you'll notice that while screw 1 does start to move, all the screw positions will start getting within range of each other. Now of course this does move the screw 1 corner up, I think the other corners matching that will eventually leave us in a more desirable location. I appreciate your comment, I am going to add a section to the article on my website that mentions this. Thanks!
@PrintsLeo3D thanks for the response. Now, with that being said. This coupled with say an auto z calibration (is, voron sexbolt), then it's a great tool to use and becomes even easier. I'm hoping to not need it at all soon. I have a mercury one.1 that I'm considering doing quad gantry on with the z endstop probe.
That's the dream . I'm looking to start on a project soon and I may be in the same boat as you 👍
@@PrintsLeo3D 8 months later I still come back to this video when I'm drawing a blank. Thanks again
Lol tell me about it. There are times where I'm sitting in front of my printers and I still pull up my videos to refresh 😆
what if your base screw "number 1" is already out of wack, how do we get it back into level?
You'll want to adjust your nozzle to that screw specifically. That would mean homing the printer, then navigating the hot end above that screw, and using a feeler gauge (I use a post it note) in order to get the gap between the nozzle and the bed just right. When I say 'just right' I mean there should be a decent amount of tenaion on the post it note when you move it between the bed and the nozzle. That will give you a great starting point.
@@PrintsLeo3D i appreciate the response, i might be going about this wrong, i put my hotend over screw 1 and i lower the Z axis, for me to get that drag i need to pretty much max out screw 1 and 2, which leaves my bed with 1 hell of a bow. definitely a struggle on the neptune 3 plus. thanks btw
@WNxSect if you're having to make such a gross adjustment for that one screw then maybe I'd recommend to change your "base" screw. If you just switch the coordinates up you can make the base screw the front right screw. For instance under screw 1 put the coords for screw 2, then for screw 2 the coords for screw 3, and so on and so forth. This might give you a better chance at a leveled bed without so much cranking.
Thank you!
You're welcome! Thanks for commenting!
I was going to setup z tilt adjust in klipper on a btt pad7 but have the 4.2.2 board in my printer, so I think I need something with drivers for each stepper like a btt skr. This might work for me untill i can put that all together. Trying to get this hero7 setup printed so i can install my sherpa mini and 5015 fans but every time i start a new print I have been having to step the z axis down .01 or .02. Something tells me i need to add something into my start print.cfg in orca but im at a loss right now!
For z tilt you will need individual steppers per Z motor, so they can adjust independently.
For the constant z adjustments, I would recommend going back to basics and and performing a probe_calibrate, and then live adjusting during a print afterwards. But you need to make sure you are saving those adjustments at the end of each print using the save icon (small disc) that appears in the tool section near the live offset controls.
To make it easier, you can take the sheet off so you can see the top of the screw. No guessing if you are directly over the center
Yes that's a great idea! One of those "why didn't I think of this myself" sort of ideas lol awesome contribution, I'll keep this in mind going forward when talking with other people. Thanks !
Even a auto leveling 3D printer can sometimes be so far out of wack that manual leveling will improve your prints. I just made a bolt in dial indicator to probe my QiDi Xmax3 to near perfection. It prints way better than my other printers just like it. Think of a bed and auto leveling like speed bumps, the closer to level your machine is at base the less travel the machine has to move to compensate for the speed bumps. Cleaner prints even for auto leveling.
Great video. What do we add to the gcode to then use the mesh after doing this?
This isn't creating you a mesh, this is just using the probe to gather height data and tell you how to level the bed. This routine is something you'd do outside of printing to make sure your bed is level. Using the probe to create a bed mesh (and use it during the print) is something I go over in detail in my longer bl touch video. I linked that in the description and it's worth a watch. If this doesn't make sense let me know and I can break it down a little further
So is this tutorial applicable to a bed that has 3 knobs instead of four?
I thought this video was great keep it up!
Thank you so much I'm trying ! Appreciate the watch and the comment