BL Touch complete setup for Klipper! Maximize your probed bed mesh!
ฝัง
- เผยแพร่เมื่อ 15 พ.ค. 2024
- Set up your bl touch on Klipper. Learn how to find the offsets of your bed leveling device and then create a mesh. If you’re having trouble creating a mesh follow this guide! Error movement out of range issues got you down? Learn how to fix those errors plus others before they begin. In this video we will also find the maximum movable bounds of your printhead, which should give you more space to print on, allowing for larger models!
article: www.printsleo3d.com/bltouchsetup
~~Like what you see and want to help the channel grow! Join my Patreon~~
/ printsleo3d
Commands:
-sanitychecks
BLTOUCH_DEBUG COMMAND=pin_down
BLTOUCH_DEBUG COMMAND=pin_up
BLTOUCH_DEBUG COMMAND=touch_mode
QUERY_PROBE
BLTOUCH_DEBUG COMMAND=reset
-zoffset
probe_calibrate
-add to START_PRINT
(add after any calls to G28. Also remove any G29 or M420 S1 calls)
BED_MESH_PROFILE LOAD=default
-if you wish to probe before each print, instead add this:
BED_MESH_CALIBRATE [METHOD=manual]
configuration example sections:
[bltouch]
sensor_pin: ^PB1 # this is unique to your mainboard
control_pin: PB0 #this is unique to your mainboard
x_offset: 10 #this needs to be calibrated
y_offset: 10
samples: 2
speed: 2
z_offset: 0
[safe_z_home]
home_xy_position: 125,125 #this should be the center of your bed
speed: 50
z_hop: 10
z_hop_speed: 5
[bed_mesh]
speed: 80
horizontal_move_z: 5
mesh_min: 10, 10 #!!min and max co-ords are based on the probes location not the nozzle!!
mesh_max: 100, 100 #needs to be calibrated for your individual printer
probe_count: 5,5 #this is the number of probing points on X then Y axis
mesh_pps: 2,2
fade_start: 1
fade_end: 10
fade_target: 0
For a fill text rundown of this installation, example configurations, copy and pasteable code, and much more visit my website:
printsleo3d.com
BL touch official : amzn.to/3OCXVrQ
BL Touch clone: amzn.to/3u9NHFH
CR Touch: amzn.to/3GKsHgt
Hictop PEI powder coated build surface: amzn.to/3u5qpB2
Note: As an Amazon Associate, whenever you purchase through one of my links I earn a small commission at no additional costs to you! I only link brands/providers I have purchased myself unless otherwise noted.
°°°Join the Discord °°°°
/ discord
For more Articles, Models, Firmware, and even Printer Profiles check out:
www.printsleo3d.com/
Interested in some upcoming Projects? Follow on Instagram to see what I’m working on!
@PrintsLeo3D
*3D Printer*
Voxelab Aquila : amzn.to/3JO0fJr
Voxelab Aquila S2: amzn.to/3gz1PoG
Ender 3 Pro : amzn.to/3JGTyZr
*Filament*
Paramount 3d PLA - black cherry: amzn.to/3GLs8D7
*Models*
Rail Inserts by PrintsLeo3D
www.printsleo3d.com/models
*Music*
Intro/Outro : Bomber (sting) - Riot
***Buy Me a Coffee (not necessary but certainly appreciated!)***
www.buymeacoffee.com/PrintsLeo3D
Check out some tips & tricks, and support the Channel!
Printsleo3d.com
*More Content*
Website: Printsleo3d.com
Instagram: @PrintsLeo3D
TikTok: @PrintsLeo3D
Twitter: @PrintsLeo3D
Etsy: www.etsy.com/shop/PrintsLeo3D
Thingiverse : www.thingiverse.com/printsleo...
Chapters:
00:00 - Intro
01:30 - outline of the process
02:05 - Adding sections to printer.cfg
04:03 - Sanity checks
06:18 - X and Y offsets
08:50 - Z offset adjustment
11:18 - Begin bed mesh
13:00 - Find min and max coordinates
16:23 - Maximize probing grid
22:30 - Input min and max mesh data
23:00 - Create bed mesh
24:30 - Live Z offset (babystepping)
26:28 - Outro
** All video editing done through DaVinci Resolve. This video editing software is
available for free, as well as a paid premium version
www.blackmagicdesign.com/prod... ** - วิทยาศาสตร์และเทคโนโลยี
![[TH] VCT Pacific - Playoffs Grand Final // PRX vs GEN](http://i.ytimg.com/vi/G345ud5yRGA/mqdefault.jpg)
This is one of the best tutorials on anything I have ever seen, in over 20 years. Thankyou so much.
lol wow! That means so much to me, thank you! I make so many adjustments while creating these videos, about what content to add, how and when to add it, and how much time to spend on it. It takes me a while to make these videos, and when I get a comment like this is blows my mind, makes my day, and makes it all worth it! Thank you!
Finally someone who explains the z-offset to a beginner, thank you so much :)
This has been the single most helpful Klipper video that I have seen yet, it takes someone smart to explain something. It takes a genius expert to explain it in a way that everyone understands. I believe you are the latter. Thank You! I have a much better idea of what I am doing now.
Jimmy!!! You're definitely giving me way too much credit but I appreciate it lol thank you so much, honestly comments like these really make this whole experience feel amazing, such an awesome community we are cultivating. Thanks for taking the time to watch, and then leave a comment, especially such a kind one. I promise I'll keep making videos aimed at this same mark, I can't say I'll always achieve it, but I will always try! Thanks again!
@@PrintsLeo3Dhe's not, thanks a lot for how easy you made this. The only issue I have Is sorting out which pin for the config.
Wow, thanks Brendan! Yea sorting pins can be a real pain if someone hasn't already done the leg work. I'm guessing this is for a non standard mainboard ?
@@PrintsLeo3D skr mini e3 v2, my friend roped me into a project that I am way over my head lol. He thinks in a computer genius
@@fitzgerdbd you are now xD, goodluck homie
Thank you, learn a lot and help me thru switching to Klipper
THIS! This is the guide I have been looking for for so long. Thank you!!!
That's what I'm here for!! Klipper is some awesome firmware, but some of it can seem unintuitive, especially coming from Marlin. So I love being able to break down some these areas to make them a little easier to digest. So happy this helped you and I really appreciate that you took tim out of your day to comment and let me know about it. Thanks !
This and all of your tutorials are put together so well with just the right amount of detail and really well laid out. I don't search youtube anymore when I need help, I just go straight to your channel! Thank you for all the time and effort you put into making these tutorials.
Thank you very much Matt! I spend a lot of time trying to lay these out in such a way that they flow nice, make sense, and are informative. I can't say I'll always hit the ball out of the park, but I can promise I will always try my best. Thanks!
Really a great video to get your new Klipper setup up and running. Well done -- subscribed.
Thank you very much! Klipper is amazing and I'm happy to help on board people however I can!
Can't believe you only have 3k subscribers, amazing video thank you. Finally able to print now that I have a perfect first layer, thanks again!
Awesome! The whole goal is to get everyone printing better and understanding how they're doing it! Thanks for the kind words, I appreciate them, I'm going to keep putting out these videos and hopefully the subscribers will come!
I've watched thousands and thousands of 3d printer video's . I almost never comment - but I couldn't not comment on this one. What a SPECTACULAR job you did on this video. It's thorough, easy to follow and understand and I have such a sense of satisfaction after re-performing all these tuning / aligning steps to my printer with your excellent guidance. Only thing you didn't cover is probe homing. My probe homed nowhere near the middle of the bed. I actually gained so much knowledge from this video - I already fixed that on my own. Thank You so much.
I have to say, thank you!! So much! I make these videos to help and whenever someone takes the time to let me know how it actually helps I'm so grateful, and not only did you do that but you also offered a way I can improve future videos!! Thank you , thank you!!! I know everyone's time is important and I appreciate you taking the time for some praise and some feedback!!
Wow this is amazing. In definitely going to use this when i fix my bracket for my bl touch, really explained a bunch and get thorough.
Thank you so much! Hopefully you get back up and running soon and can start using the info. I like your thumbnail pic also, great color scheme and pic! Thanks for watching!
Your setup videos are so clear and universal. Man, you've been a big help in getting my Ender 3 S1 tuned up with Klipper. Thank you!
I love to hear it! Thank you so much for taking the time to share the experience. I take special care to try and keep my videos direct and easy to understand. It takes me a little longer than most but in the end I think it's worth it. Thanks!
Absolutely Awesome Vid - so helpful!!!!
Extremely helpful! Great video with so much useful information.
Thanks Josh! Klipper is powerful but not always intuitive, and I love making these type of breakdown videos. Thank for watching and commenting!
I watched several videos and guides but only your video was straight forward and easy to follow. Thanks
Thank you! Love hearing that these videos are hitting the target I'm aiming for ! Thanks for watching and for commenting.
Outstanding content. I am so glad that I found your channel. I have now converted my old Ender 3 (with BLV Mods and direct drive) as my Tevo Tornado (with direct drive) and BL-Touchs both. I also stumbled onto your Screws_Tilt_Calibrate article and that is awesome as well. Now to go through the rest of your content. Your delivery method is spot on and your explanations are great and even though I have been printing for over 4 years now, I'm still learning all the time (maybe because I can't stop tweaking). Keep up the great work. 🖖
Brett thank you thank you thank you!! Always appreciate some kind words and even more so a nice success story! Glad what I am putting out there is helping you! Appreciate you taking the time to tell me about your printing experience thus far, it means a lot ! Thanks!
Leo thank you for your amazing videos! 👏 my S2 works as a charm.
Thank you for watching them and leaving a comment ! I love making these videos and I am so happy to see them helping! Hopefully there's more to come!
Looking forward for the next video about tunning klipper!
Coming soon!! I am finishing up a dual belted Z video as we speak. Then going to get into input shaping(resonance compensation) and pressure advance!!! I am excited as they're two really great, really awesome topics!
Amazing video. Thank you for this. Now I am setup to max capacity.
Awesome, I'm glad this helped! Thanks for the comment!
Best, easiest to follow guide that I needed. I tried others, but yours worked for me! Thank you!
Aaron thank you so much!!! Virws and comments are so appreciated, and when you go the extra mile and send me a tip it really helps the channel! Thank you thank you! This video gets a lot of love, which means I know what I should be doing, more in depth Klipper videos lol !
This is one of the most thorough guides out there. You rock my man!
Thank you much! Klipper has so much to offer I just do my best to make some of it's tools easier to understand!
Extremely pleasant and helpful cadence and clarity. This was the on-boarding help I wanted.
I'm going to comment on my comment now that I've completed the video to applaud you once again for this WONDERFUL explanation. I learned a lot about Klipper.
Thank you so much! I take a lot of time outside of recording these videos to try and get the proper flow, not be too boring but also add a thorough explanation. I probably film the video 30 times in my head before I ever actually sit down. Knowing it's helping people is the ultimate goal, and I tha n you for leaving a comment to let me know it is hitting the mark! Very much appreciate the comment
I should say I very much appreciate both the comments lol! Thank you again, and if you're loving Klipper I have upcoming videos that should be perfect for you!
WOW I can't even begin to say how amazing this tutorial is. I had been fighting with setting up Klipper and stumbled across this video. I had watched numerous videos and none of them worked . I watched this video for close to 3 hours, only because i would pause the video and double check my steps and now my setup is complete. Everything working perfectly. keep up the amazing work. You made it so easy to follow along.
Hey Jason, sorry I thought I responded to your comment a week ago lol Klipper can have a bit of a learning curve so I'm glad my videos can help get over that hump as that's the goal! Thanks for watching and I am glad I helped !
Great tutorial! This made everything much easier! Thank you!
You're welcome! Getting into Klipper is amazing but there can be a learning curve, so I do my best to help! Thanks for watching and for letting me know this video was helpful !
My man. This is THE video I needed. Thank you.
Matthew you're welcome! Thanks for watching and then taking the extra time to comment. I've said this time and time again, Klipper is extreme powerful but getting the ball rolling with it can be tough, so I am glad I can add a little insight to help people along.
Thank you very much. This is an extremely underrated video.
Thank you so much! It's here to help, but it's people who thumbs up, and subscribe, and comment, that help these videos get pushed out to assist more people. So, thank you for the help!
This single video has saved my butt already 2 times! Thank you!!
Glad to spare you some frustration lol thanks for watching and thanks for leaving a comment.
simple, clear and organized step-by-step tutorial to the primary and most important configurations that will, later on, make Klipper a useful and pleasant experience, thank you
I appreciate your comment because that's exactly what I am going for! Trying to help make some of these tricky tasks a little more bearable. I appreciate it!
A huge thank to you! Still a very helpful and cool guide!
Awesome to hear! Thanks for watching and for dropping a comment.
Leo, I will also say that this has been quite helpful, in preparing my ender 3 with Klip and BLT. Thank you for taking the time to create the content you for the community. Almost to my first print with Klipper, but still need to finalize and do a few more steps. My sincerest thanks..
Thank you so much. Really nice words, and I appreciate you taking the time to leave then here for me. Always nice to get some inspiration like this! More Klipper content on the way (pressure advance getting finished now) that I hope is just as helpful!
@PrintsLeo3D no problem 😊 and looking fwd to it, keep up the good work.. its appreciated
Great Tutorial. Very easy to follow steps. keep up good work.
Thank you so much! I'm trying to make these calibrations and these concepts easy to understand and apply. Glad it's working!
Thank you for making this video. I got the sonic pad and sprite extruder for the ender 3v2. Only got it working correctly because this video. Thanks again!!
Awesome, I'm so glad to hear that! The goal of these videos is to help people get their printer working well, and when it works I am overjoyed. Thanks for dropping by and leaving a comment to let me know!
Great information here, I had trouble finding videos this helpful when I set mine up! Had to watch to make sure I didn't miss anything 😆I like how you showed finding the probe offset, will definitely have to use that in the future!
Yea finding those offsets can be tricky but this method is pretty straightforward! Thanks for watching and comment, that means a lot! Happy printing!
super helpful, thorough with essential details.. thank you!
Hana you're welcome ! Thanks for taking the time time to leave a comment, it lets me know what I am trying to do it working! Thank you thank you!
Thanks. This is the best video about bltouch setup.
Tha k you so much that's so nice to hear! I take time to make these videos and I'm happy to hear when they help people out. Thank you !
AWESOME VID ...love how Succint and down to business you are ! Super helpful Bro..... keep em coming
Thank you so much for the vote of confidence! I'll definitely be bringing more Klipper content very shortly, there's so much to explore!
Joined the patreon due to the content of this video. Clear and concise, solved my problems with the dual 5015 fan mod V4 from ZUFF on cults that I purchased, which move the Creality touch a significant distance in both x and y axis's. All fixed with this Klipper tutorial. Relatively new to Klipper and love it.
Thank you thank you thank you! I just saw the subscription and it made my day! Klipper is really amazing firmware but, like most new things, there are some growing pains. I am happy to make content like this that breaks some of the basics down into more digestible pieces. I have more Klipper videos on the channel and there is a lot more on the way! Thanks for the support !
Great tutorial and thanks for the help in Discord, moving on to your other videos.
Thanks Ray! Glad you stopped into the Discord, a lot of these issues are better worked out through that sort of messaging service, and with the help of a lot more people lol I appreciate you taking the time to come to TH-cam and leave me a comment ! Thanks!
Thank you for your datailed and very useful videos!!!
You're welcome! I love making them, so if everyone keeps watching I'll keep making them! Thanks for the comment .
Gonna put this channel in my recommends over at Discord.
Excellent work on this video !
Thank you so much! I love Klipper and I love making these videos. I'm always happy to hear feedback like this, makes me want to keep making more and more, thanks!
Very well done. I found just what I needed and more. 10/10
Thank you, happy to help! A lot more Klipper videos planned, there's so much that it offers us that I can't wait to explore. Thanks for watching and for leaving a comment !
You saved my sanity... Thank you so much, this is a great tutorial with all the steps outlined and described!
I'm so glad this helped and thanks for leaving me this comment ! I take time making these and it's to make sure they are clear and easy to follow. Thanks for taking the time to give me some kind words, it means the world !
Conrats my friend, this must be the best tutorial for all proposes in 3d printing in all youtube. Amazing. Simple, just to the point and even showing sanity checks. Thanks!!!!
Nicolas thank you! I appreciate the kind words because I put a lot of time into these to make sure they hit all the marks you referred to. Thanks for watching and for commenting to tell me it is working!!
Been stumbling along with Klipper on the Creality Sonicpad. This video helped me really dial it in and now it's working so much better. Thanks
Glad it helped ! Always nice to hear when this helps someone get going with Klipper. Good luck and happy printing!
The only video you need to set up Klipper and BLtouch/CRtouch. Amazing, thank you so much.
Hey, thank you so much! I try my best to put as much detail into these videos, and I appreciate when someone takes the time to tell me it's working! Appreciate it 👍
@@PrintsLeo3D of course. I really appreciated the dive into the config settings. I'm still having issues with the z offset where it seems like too high one moment and too low the next, but I'm much closer!
One thing to remember when adjusting z offset. If you adjust it live make sure you save that adjustment directly after the print completes. There will be a small disc icon within the Tool section (next to where you adjust z offset) and that's what you'll use to save the recent adjustment. Hope this helps.
Absolutely great tutorial. Many many thanks
Thanks for leaving a comment! My hope is that these videos help, and I am happy to hear when they do! Thanks
excellent video and explanation !!!!!
Thank you so much , I appreciate you taking time to comment and I'm glad it helped .
Thank you so much for this vid mate, really helped me get my first Klipper install working as good as my tuned marlin. Now onto the juicy stuff with vibration and pressure advance :)
Love a good first time Klipper build! Happy to hear this helped, and I have more Klipper related videos coming that will help as you move through Klipper. Thanks for watching and sharing your experience.
@@PrintsLeo3D looking forward to it, this is the only vid I found on really tuning mesh and bed size. I have modded my E3V2Neo with Sprite Pro so had some challenges understanding all the limits for bed size etc since print head/gantry/endstops were all out compared to stock. Anyway keep up the good work, you certainly have me subscribed!
This video got me on the right track thanks dude
You're very welcome! I appreciate the time you took to leave a comment. That sort of gesture means a lot to me. Thanks!
thank you, this is one of the best videos i've seen.
I'm really happy I made it! Thanks for commenting and letting me know it helped!
I just made the switch to Klipper from stock Marlin. This was a great tutorial. It truly helped me adjust for my new Sprite Pro extruder's cr touch.
That's great to hear ! Klipper really has so many tricks up it's sleeve, so I'm happy to be able to break some basics down so you can get to the fun parts a little quicker. Joshua thanks for the view and for taking time to comment !
Man, you is my 3D Printing bro now, perfect videos about Klipper tuning! Thanks
Thank you so much! I have more Klipper videos on the way so we'll keep getting your prints better and better lol
Seriously this is the best youtube video explaining this. I'm not new to printing but i'm new to klipper. You deserve a lot more subscribers than you have. Just gained one more!
Thank you very much! Klipper is such fantastic firmware, once you can navigate some of the ins and outs it's smooth sailing! Glad I could be of some service and I appreciate the sub. Thank you!
Started printing just a couple months ago. For initial setup, I used a few other tubers videos to help me. They got me into great positioning for being new.
Now, I’m to a point where I want to further refine my knowledge and print accuracy.
This video gives exactly what I was wanting to learn, and I’ll be working to set my system up using your instruction.
Thanks for sharing this wisdom!
That's awesome and I am happy to help! There can be a lot going on when starting to get into the 3d printing world, and taking the info in bite size chunks is the smartest way to go about it. I'm glad you found me and hopefully I can continue to produce worthwhile content to help you on the journey!
This is the most insane tutorial I followed yet and it works!! everything works. Thank you for all the knowledge from this video. My old CR-10s just got better.
Awesome, so glad this helps! I take time to try and make these concepts easy to understand so it's nice to hear when it works! When I switched my CR10 over to Klipper it was like night and day! It was like a whole new printer! Thanks for watching and for letting me know it helped!
Seen so many videos, read so much too. But this was just excellent, thank you. Just at right pace, well explained, thorough. Much appreciated.
Thank you thank you! I really take time and plot these videos out so they flow and make sense. It doesn't always work like I want but when it does it's nice to hear the positive feedback. Thank you!
THANK YOU! My CR-Touch works now! The only place I could find that fixed my issue.
I love hearing this! Thanks for letting me know this helped, it makes my day!
@@PrintsLeo3DYour welcome!
Your videos are amazing and your discord is even better My V2 neo has been very problematic
Thank you so much!! I have been a little quiet on Discord as of late but thankfully the group of people we have there are so welcoming and informative. I am glad you took the time to check it out! Thanks!
Great thanks for sharing 👍
You're welcome! Thanks for leaving a comment 👍
This is a great tutorial, thank you!
You're welcome! Thanks for watching and for taking the time to leave a comment!
This was an absolutely amazing video. I have my Sonic Pad all setup with exception to my Cr-Touch so looking forward to following this and getting my printer further dialed in.
Good luck! After you get these settings dialed in your Klipper experience will hopefully be buttery smooth! Thanks for watching and I appreciate you taking the time to add something to the comment section !!
@@PrintsLeo3D No Problem. I am going to follow this and then go do my pressure advance cal. I have printed without either, and honestly i printed a Christmas gnome with lightning infill, so very much hollow with 4 wall layers and it came out super clean, and only took 7 hours at 100mm/s, which before Klipper was around 13 hours or some such, and the quality was better with Klipper. So super happy with my upgrade. Very much a learning curve, but hey that is what tinkering is all about. Anyhow, thanks again!
Yea Klipper gets the hype from the speed, but the quality is amazing! I was printing some Christmas gnomes on my KLP1 yesterday lol great minds think alike!
@@PrintsLeo3D So I ran the pressure advance test using the Gcode from the website you linked, and followed the steps to ensure I got it mostly right. in my print, every single line looked exactly the same. When it started the acceleration it would thin, and when it ended the speed back to slow, it left a blob. Every line. I will test again because I had build start and end print macros, but I am going to revert back to letting the slicer call those out because when I use the end print gcode per Cura copy and paste, it errors our with some of the coding, but when the slicer does it, it runs fine. Interesting, but not the end of the world. I will work that later. Anyhow, Just wanted to let you know the weird experience to see if you'd seen that before. I use a direct drive, so .005 step increments.
Just managed to install Klipper on a Wyse 3040 last night for the first time for my E3v2 and this got suggested by YT. Long live the algorithm.
Best video on this topic, I was a bit in the dark about the BL Touch, all I had were some example configs I found around the net, but no explanation about why and how. Great job man
Thank you so much!! Klipper is such a fantastic firmware I'm glad to see more and more poeple adopting it. I'm seeing more people use thin clients or old PCs to run Klipper and it's good to know you were able to get the setup running. Good luck and enjoy Klipper, if you help with more topics you'll be able to find em here! I plan on dedicating a lot more videos on some helpful topics. Thanks for the sub and the commemt !
Well this helped me a lot. This helped me instaling the 3D touch. Thank you.
Anytime! The go of these videos is to provide help, and when people take the time to comment and let me know that this video helped it means the world to me!!! Thank you so much !
Well done, best explanation I have seen. I was always sort of able to calibrate the bed, but now I also understand what I am doing.
I changed a couple off setting in my config as I learned mine where wrong :-) Not super wrong.
Ones again well done and thanks heaps for your time to explain things.
Thank you so much Ronald. Glad I was able to shine a little more light on the topic, as it is important, and hopefully will help bet those nice prints for you!
The best klioper video I’ve seen so far
Thank you! I'm trying to bring as much Klipper content and I can, and try and keep it all easy to follow and retain.
Really a very good video. Great job ! THANKS
Thank you very much, I'm happy to help!
Thank you so much. Very comprehensive guide.
I'm happy you liked it! I try to make my videos clear and concise , the end goal is always to make this info available to more people. Thanks for leaving a comment !
@@PrintsLeo3D Today morning i started to setup my BL Touch while watching your video, and completed in 30 minutes. And 5 min i searched for BLtouch pin down command ;) thank you again and best regards from Turkiye
From New York, you're welcome!! I'm glad you found the channel!
you explained things so well, pls do one about tuning pressure advance
Thank you so much! I was planning on doing that video in the near future, but for various reasons I think I'm going to be shuffling my lineup and pressure advance might be the next video!!
Amazing explanation. Thank you
Very welcome! Thanks for watching and sharing.
thank you this was a huge help
absolute legend, very informative video
I appreciate that! Many more Klipper videos to come!
You are a God among men. I bow to you. I have spent 7 lifetimes searching for information like this. Thank you!
😆 thank you so much! The Klipper documentation is so thorough but it's written like... well documentation lol so it's so tough to understand. I'm glad these videos are helping people because I love making them and Klipper is awesome firmware to be using! Thanks for watching and for letting me know it helped!!!
xaxaxa yeah me too lifetime of searching :DD
Leo is the MAN
Thank you so much for creating this video. This was really helpful and saved lot of extra efforts to not to calibrate printer. :D
You're very welcome. I love doing these videos, and I'll keep making them, and when people take time to comment and let me know what is helping (and what isn't) it means the world to me ! Thank you !
This was great. Thanks Leo I did find out that the location of the BLT changes the math. I have the Biqu B1 and the BLT mounts in front and the math changed.
Yes it does. While the formulas stay the same, the idea is flipped. I didn't want to go into it too much in the video (to not confuse anyone) so I'm glad you were able to figure that all out yourself! Happy I helped and good luck !
Thank's Dr. Leo i did it with your video
Thank you!! I like that, Dr.!
I’m so glad you have videos on klipper. I think it’s enough to sway me to actually get the sonic pad. Your videos have been a huge help from day 1. Why stop now lol.😅
I love Klipper and going forward I am going to have a lot of videos on Klipper. I would hazard you a little though, Klipper is great - the Sonic pad can be a little rough lol people who I've talked to that didn't have Creality made printers had a tough setting up the pad tk work with their printers. I'd recommend using an alternative MCU (my recommendation is the Inovato Quadra - which I have a video on). That being said thanks for watching and I appreciate the support!
@@PrintsLeo3D ok thank you for the tip!
Well, it did help me a lot! I couldn't make my clone 3D touch work, but now it does thanks to the tips on the website! Thank you PrintsLeo3D!
Gerlo I'm so happy the website was able to help you! I always think of my website as sort of a living guide, something I can continually update and edit. Where once these videos get posted the information is locked in. It's nice to hear people are taking advantage of it! Thanks for watching and leaving a comment.
Thank you so much for the Video! I was nearly at the point to give up on a modified Sovol SV04. I wish I saw your Video one month earlier, it would have saved me a lot of pain, anger and filament!
I'm so glad to help and thank you so much for the 'Super Thanks'! It's much much appreciated. And like I said to your other comment, don't be a stranger to the Discord , I'm sure everyone would love to see what this printer is capable of !
I have just recently gotten into 3d printing and naturally I go all in on learning new things I am interested in. Trying to learn how to set up Klipper has been a nightmare for me having little experience with setting up firmware. I had almost given up to just go back to my original firmware setup when I found this video and the explanation and guidance was far superior to a newbie than any other heavily technical videos I had previously watched. Thank you for taking the time to help guide others on this information because you have just turned my nightmare around. I am certainly subscribing and will be digging through other videos to see what else I can learn!
Johalas thank you so much and I'm so happy I can help! 3d printing is an amazing hobby, so many aspevts and areas to it, and Klipper is another awesome avenue for you to explore. It can be a little difficult to get started with but once you get your feet under you you'll be running in no time! I am happy to give a helping hand and I hope you enjoy your printer and Klipper!!
Just be happy you started with Klipper and not Marlin. Klipper is easier, believe it or not.
I completely agree. Klipper had a higher initial barrier of entry, but once you get it everything is open for you
C'est un super bon tutoriel. Cela explique vraiment bien les choses. Merci beaucoup .
Merci! Je fais de mon mieux pour rendre ces vidéos aussi claires et concises que possible. Je vous remercie de laisser un commentaire et de me faire savoir que cela a aidé!
It's apparently been said, but this is by far the most useful tutorial I've seen on anything to do with printing. Amazing work.
Thank you thank you thank you!! This is the kind of sentiment I don't mind hearing over and k et again. Getting this sort of feedback helps me create newer videos, using the same techniques to get the information across.
Ok, I switched to Klipper yesterdqy and spent hours researching how to configure it properly. Have I only seen this video. Klipper-team should link to this video under their leveling section, as this has been the most helpful video on TH-cam I’ve watched in a really long time. Thanks!
Eirik than you so much! I take a lot of time trying to pace these videos well and when I get feedback like this it means a lot! Thanks !
Just wanted to say thank you for your guide.
I've put klipper on my ender 5 last year, but I've encountered so many issues with z offset that I stopped using it for a long time.
I tried in the last few evening setting it up again with no luck, up until I came across your video which has helped me calibrate my printer and now it seems to just work.
Thank you so much !
Woah! Thank you so much. I am so happy when these videos help, sometimes filming them and getting them together feels like an uphill battle. When someone gets this sort of experience out of it all that time is worthwhile!! Thank you for the comment and for the generous tip!
you helped me set up my new to me ender 5 plus. you are the man! i got this thing with the sonic pad for 60 dollars since the previous owner thought it was broken since the sonic pad rendered the built in screen useless. I've been working out the firmware/config kinks from scratch and i do NOT know what i am doing. Thank you so much for this. i've made a TON of progress ,
Oh wow talk about throwing away gold! That's great and I am happy to help! Once you get set up and going with Klipper you're really going to love it. You got a great deal for $80 I hope it works out for you, good luck@=!
You explain Klipper a lot better than Nero, you take your time and teach us so well. Thank you so much sir.
Thank you so much! These topics can be so difficult to cover , so getting information from many sources is a smart way to go about it! I appreciate the compliment as I know Nero is the defacto Klipper channel. I have a lot more Klipper-related videos in the works so I hope they help as well as this !! Thanks for watching!!
Yet another complete guide for how to find out the correct offsets of any printer!
Thank you again! I told you I like to keep 'em long 😁 I'm happy to keep making these Klipper videos, there's so much to learn here and it's a ton of fun. Thanks for watching!
God bless you, you saved my afternoon!
So happy to hear it! That's the reason I make these videos! Appreciate you taking the time to let me know.
Awesome video Leo!
Thank you Ben I appreciate that!
NGL your vid help me all this time ago. I relized that i have a bltouch that was adapted for the ender 3 board which uses the Z Endstop as the sensor_pin. I was able to use the pinout of the btt board to find out I needed to change PC14 to PC2. Even thought you didn't really document. Your troubleshooting steps led me to the correct answer so thanks
Glad I can help, even if it's only a partial help lol Those BTT boards are really great for the documentation they provide us, those pinouts are the real hero. I'm glad you were able to take what I was doing here and help your situation!
I've been jumping between tutorials and forums trying to figure out why my z wouldn't attempt to home. Adjusting the settings in the z-axis code finally got it to work. Thank you!!
Awesome, so glad to help ! Ad you found the video and I appreciate you took the extra time to comment and let me know how it was helpful . Thanks!
Thank you for this. First time using Klipper and had no idea why it was crashing into the bed and trying to go off the rails. This is very thorough and easily consumable for 3D printer Users of all skill levels.
Thanks Kevin! Klipper is really.amazing and has so many tools , and I try my best to explain them in such a way that you can hit the ground running. Appreciate the feedback and stay tuned for my Klipper related videos. Thanks!
Wow...after failing to set my cr10s up with a 3dtouch on the sonic pad your video stepped me through it easily. Thank you so much for your efforts...... regards from Tasmania....
Amanda thank you so so much! Not only for the nice comment but also the very generous tip! That really means a lot to me. Iove making these videos, and when they help people navigate through Klipper and are happy with the outcome it makes my day! Thank you, thank you, thank you!!
Hi...I appreciated the effort you put into explaining the setup, @@PrintsLeo3D having a while ago tried to add the 3dtouch using th3d's marlin etc etc the Klipper experience is a game changer. Just bought a neptune 4pro which introduced me to it, sonic was obvious to add my cr6se and cr10s to. 1 question, I couldnt see where to add the bed mesh profile line to in my config, dosent have the start or end macro section anywhere in it, did a few random insert positions but kept telling an error. Or do I add the whole 15 lines or so not just the 1 bed mesh line. I did add it to the cura cr10s start profile which I hope works. thanx again.........
Because you're running some Creality printers the Sonic pad isn't a bad option, but unfortunately overall it can be a little tricky. I don't have the Sonic pad but it definitely does have a start_print (or print_start) macro somewhere. It doesn't necessarily have to be written within the printer.cfg but it will need to be "included". What I mean by "included" is that any macro can be written within a different text file and then pulled into the printer.cfg usually at the top of the printer.cfg you'll see a bunch of files being included, it would look like this:
[Include macros.cfg]
Then all the information within the text file macros.cfg would be used just like printer.cfg
Using the include function is a way to clean up your files and make them easier to read. So if there is no print_start macro in printer.cfg then check what files are being included and see if it is one of those.
Excellent video Leo, thank you.
Thank you, for taking the time to comment!
@@PrintsLeo3D always! And shared in my other Discord group, we love your videos there too. F.B. is next. I pass you around like an old hat
You are the best, I am just going to create a canned 'Thank you' response for you because you are always in the comments cheering me on and I appreciate it! You know these videos take a me a lot of time, but it always is worth it with the amount of goodwill everyone shows me, so THANK YOU!!!!
Believe me, I know the amount of effort that goes into your videos and I appreciate it greatly even if it's not something I intend to do, I still learn something. And by the way, when I share your videos I always get comments about how helpful your videos are and the quality of the content so maybe they don't always comment and I wish they would but you have followers for sure and people know who Leo is. I hope your channel continues to grow and you keep putting out quality how-to videos.
I have a modified SOVOL SV04 Idex with two Hemera instead of the stock ones. After two weeks messing around with X&Y Offsets for BL/CR Touch, Extruder 1 & 2 and the bed_mesh I was already at the point to throw everything out of the window. I can't thank you enough for this great video. Perfectly explained and with a clear & good structure. Now I've got my settings dialed in an the tip with the post-it and the marker was a "HEUREKA!" moment for me, getting precise Offsets not only for the Tpuch probe but also for my second Extruder! (I've wasted nearly 500g filament for all the calibration STLs) I've got exact 5 years Experience in 3D printing with MarlinFW but just one month with Klipper. And an IDEX printer. And a modified one .
So again: THANK YOU!
Woah that's amazing!! Trying to get these settings correct for a single extruder printer can be tough, but being able to balance all this info and then apply it to a second extruder is another thing entirely!! So happy that my video helped and thanknyou for sharing! I have been in hearing more and more good stuff about the Sovol units, it seems like this is another positive anecdote. If you ever want to stop by the Discord and drop some pictures of the printer or your prints we'd love to see. Especially with those Hemeras 🤤 thanks again!
Fantastic video!
Thank you so much! Love knowing that the time I spent with this video is helping people. never ceases to amaze me! Thank you!
Thank you for this guide, the part with assigning probge as an end switch helped me alot because klipper doesn't print in negative z coordinates and bed of my printer is all in negative, it was printing in air and now it finally started to print on bed.
Awesome, and I'm glad this helped! Thanks for watching and then taking the time to let me know it helped, that feedback is the best I can ask for. Thanks!
Excellent video, very well explained and I found it at the right time. You are very good and also I subscribe. Greetings
Ivan thank you so much! Glad you stumbled across this video at the right time! I always try and explain these concepts as easy and thoroughly as I can, so I thank you for letting me know it's working. Cheers!
Awesome video. Thank you!
Thank you so much and I appreciate the feedback! Keep on Printing!
THANK YOU!!!!
Of course!!! Glad this could help!
really great tutoriaö i was getting insane to get the right config data, now i know how to do it my self really great tutorial.
Awesome, glad you got everything sorted out. I love making these videos because Klipper is not at a lack of helpful tools, but sorting through the docs can be time consuming. I'm happy to front load that work and help however I can! I appreciate you leaving a comment to let me know I helped!
First of all, I love your handle - that's very clever. But royalty you are!! This is an amazing video that helped me BIG TIME. I've been using my Ender 5 plus for about a year and just decided to try the Creality Sonic Pad. I was NOT able to complete a complete bed leveling because it wouldn't go to the final row, it would throw an error that it was printing out of range. None of the changes I made in the basic settings fixed it. UNTIL I came across YOUR video. Took a little to wrap my head around the math because my bed is 350x350x400 so I need to convert a bit. But I did,. and when I did, with your help, I was finally able to complete a FULL bed level. THANK YOU very much!!
You're so very welcome and I appreciate the compliment!! The Sonic pad has been the bane of many a good 3d printers existance, so I'm happy you were able to use some of my video to get you through. Thanks for watching and for taking the time for the very classy and inspired comment!