I absolutely love your videos man. Out of all the pressure washing/soft washing content, yours are incredible for folks new to the business like myself. Really appreciate you taking the time to make these.
I got this one from Russ at south side equipment in Louisville KY. But you can get them from anyone. Panhandle power wash supply, pressure wash products, pressure Tek. The gun will run about $40-50 with the fittings.
Hay buddy hope you are your family are doing good, my name is Joe I enjoyed this video it inspired me too make a remote system.... I'm having issues pairing the remote baycicly I'm not getting a green light. Any help would be greatly appreciated
Have you checked to see if you have power to your on/off switch (is it lighting up)? Do you have a tester to see if there is power coming to the Module
@@KentuckyWashPros yes I'm getting power on to the on and off switch and the ball valve also getting power to the led light. I can't get the remote work I'm not getting the green light on the Receiver
Why did you go with 1/4 inch did it work well. Why not 1/2 in for more flow. When using 1/4 inch to your downstream injector would it not lower the % even more before getting to the downstream injector lower your out flow %.
I absolutely love your videos man. Out of all the pressure washing/soft washing content, yours are incredible for folks new to the business like myself. Really appreciate you taking the time to make these.
You’re welcome and thanks for the comment!
Good job! I'm going to do mine tonight with the LED Light install also.
Thank you, I was in a hurry to get this installed. I plan to go back and add the LED Light.
Im pretty sure his name is Erb or Herb . Nice build man those sure are a time saver !
Great video buddy
Just subscribed
Thanks!
@@KentuckyWashPros YW
Only question i have is do you take the lil ball out of your downstreamer at the tee or leave it in
If you do, Water will flow into your sh tank when off the trigger
What was the lifespan on the ball valve? Currently have the same one but worried it will go quick.
Depends on usage and how faithful you are with rinsing them out
Did you add lights when injector is on
Yes
Thanks for your help through your videos! You have a softwash gun in the video. Where did you buy it? I didn’t see it in your links. Thanks again!
I got this one from Russ at south side equipment in Louisville KY. But you can get them from anyone. Panhandle power wash supply, pressure wash products, pressure Tek. The gun will run about $40-50 with the fittings.
How did the ball valve handle the high pressure? Thanks for the vid.
The ball valve doesn’t have any high pressure ran through it
@@KentuckyWashPros ah got it. It’s not a bypass. Thanks
Hay buddy hope you are your family are doing good, my name is Joe I enjoyed this video it inspired me too make a remote system.... I'm having issues pairing the remote baycicly I'm not getting a green light. Any help would be greatly appreciated
Have you checked to see if you have power to your on/off switch (is it lighting up)? Do you have a tester to see if there is power coming to the Module
@@KentuckyWashPros yes I'm getting power on to the on and off switch and the ball valve also getting power to the led light. I can't get the remote work I'm not getting the green light on the Receiver
@@freepresssa9299 did you press the button on the side of the module 3 times to to program your remote?
Look me up on FACEBOOK Kentucky Wash Pros and send me a message
@@KentuckyWashPros yes sir I did also did the 8 times to reset it but not getting any signal. This is the second one and having the same issue
You have a 1/2” ball valve linked, just and fyi 😊
TY
Have you had any issues w leaks spraying onto the remote control box inside the gray box?
Never did.
Thanks for the video!!! I went with your description list. How’d you hook up the volt meter?
To the main power + and - on the module
Nice!!
Do you make this for a 12v system?
I haven’t but it is very doable
Why did you go with 1/4 inch did it work well. Why not 1/2 in for more flow. When using 1/4 inch to your downstream injector would it not lower the % even more before getting to the downstream injector lower your out flow %.
Downstream injectors have 1/4 barbs, that’s why I went this route. Using a 1/2 hose would have not changed anything.
Does the same wiring configuration apply to a 3 way ball valve??
No they wire up differently.
@@KentuckyWashPros with the same receiver u have??
@@perezleolp they wire up differently because the have 3 wires instead of 2
@@KentuckyWashPros would the receiver you have work with a 3 way I'm trying to build my own
@@perezleolp yes it would work.
Total cost for this?
I build and sell them for $299 or you can do it your self for around $100-150 depending on how fancy you want it
@@KentuckyWashPros does this come with the injector and all or just the box?
@@jetskirehab750 come complete minus the injector, which they cost better $15-30
the cajun has great info, also checkout powerful improvements... his name is joe deery from putnam connecticut. tons of knowledge and info.
That antenna has a far shorter range
I’ve not had any issues upto 300ft with it