Glad I found this video. Wilson 5000 came in and I had continuity between the threads and the antennas positive probe seems kind of odd but I’m no RF expert yet
Most of these base loaded antennas are shunt loaded, i.e.: the coil is grounded at a specific tap point on the coil (slightly different tap point on each coil) to help with matching.
Old post I know, but I am going to assume the quality control has gone down since they first came, out as I have had MANY of these same antennas with no problems whatsoever back in the late 1990's early 2000's.
sorry Vic I didn't see comment, you can't really take apart. they are fused together, you could try and cut around with hack saw on bottom? but you have to glue back together with apoxy regard Larry
Dear Larry -- I need your help ... how to disassemble the covering mantle from the coil ... I assume, at the whip connector on the top -- I actually tried to open with a big torque but without success. Is it glued there ? Can you help me with this issue -- what could i try ?
![[Live] : ONE 169 วันนี้!! "อนาโตลี vs อูมาร์"](http://i.ytimg.com/vi/IK3YZVWuFJg/mqdefault.jpg)
Glad I found this video. Wilson 5000 came in and I had continuity between the threads and the antennas positive probe seems kind of odd but I’m no RF expert yet
Most of these base loaded antennas are shunt loaded, i.e.: the coil is grounded at a specific tap point on the coil (slightly different tap point on each coil) to help with matching.
Thanks for making this video. It helps illustrate how tapped coils work.
Old post I know, but I am going to assume the quality control has gone down since they first came, out as I have had MANY of these same antennas with no problems whatsoever back in the late 1990's early 2000's.
Yes nothing is made like it used to.
I had a couple of freinds with the same problem. I had great results with the firestick 5/8 wave. 5fter.
I'am Your Newest Subscriber Great Videos
Awesome thank you!
Good job Larry, I wouldn’t waste my time my time is worth more than that. Get a different antenna like a k 40 don’t laugh there just as good!!
why wouldn't they just continue the coil at a 90 into the center like the 5000?
that copper stub is a disgrace
How in the world did you get that thing apart
It was. While ago I think hack saw lol
He says Heyeah instead of here...?
yes how did you remove coil cover i tried and it does not want to to come off.. help needed
sorry Vic I didn't see comment, you can't really take apart. they are fused together,
you could try and cut around with hack saw on bottom? but you have to glue back together with apoxy
regard Larry
@@Larrymutz Thank you Larry for your help..
Ok, at the end of the video you explain, that they clued it ... very bad ... and very bad for their customers and for them .. I will not buy one again
I have 2 of these and both are bad, 1 is older model and the other is like new never used it, both showing high swr's .
Dear Larry -- I need your help ... how to disassemble the covering mantle from the coil ... I assume, at the whip connector on the top -- I actually tried to open with a big
torque but without success. Is it glued there ? Can you help me with this issue -- what could i try ?
Stephan Strauss
it is plastic welded at bottom
there almost impossible to open with out destroying.
Regards Larry
PUTZ describes this guy better.