Thank god this is the video that I needed! I had to replace the pieces inside the e61 and I knew I didn't place the flow control paddle at the right location, there was way too much water going out. You explain very well how to set it up. thank you!
Quick question: What tool, and which size, did you use to install that first tiny brass piece? I’m about to install my kit, and I don’t have whatever that tool is. Thanks for your help!
I got a brand new Bianca V3 and looks like the flow regulator was installed wrong because the needle is close and paddle all the way to the left and their is flow of water still can’t get the needle to fully shut the water off. Any suggestions?
amazing video as always... i have 1 question. I have the Mara X and I really want to install the flow control kit. i live in Europe but I cannot seem to find the kit for sale in EU, the place ive found it is in Singapore. Do you know of a place in EU where I can order the flow control kit in EU? because im sure it will be much quicker delivery and will cost probably less too. Any ideas you have I would welcome. Thanks.
@@lelitinsider2977 Thanks! Great video. What is the flow after 20 seconds? or did you mean that the minimum flow is always 5-7 gram per second? Also in full open position, does it replicate the flow in the stock Mara X without the flow control? Finally is the pre-infusion the same as the stock Mara X when fully open? Thank You!
Thank god this is the video that I needed! I had to replace the pieces inside the e61 and I knew I didn't place the flow control paddle at the right location, there was way too much water going out. You explain very well how to set it up. thank you!
Hello, Molykote G1502 or Molykote 111? what is the best or the most appropriate? And to grease the cam?
Where I can buy flow control? Just piece on top.
??
And the jiglee how diameter hace in the hole?
+1
Quick question: What tool, and which size, did you use to install that first tiny brass piece? I’m about to install my kit, and I don’t have whatever that tool is. Thanks for your help!
hi, you need the 8 mm exagonal screwrdiver
@@lelitinsider2977 Thanks!!
I got a brand new Bianca V3 and looks like the flow regulator was installed wrong because the needle is close and paddle all the way to the left and their is flow of water still can’t get the needle to fully shut the water off. Any suggestions?
please send a video at care@lelit.com
amazing video as always... i have 1 question. I have the Mara X and I really want to install the flow control kit. i live in Europe but I cannot seem to find the kit for sale in EU, the place ive found it is in Singapore. Do you know of a place in EU where I can order the flow control kit in EU? because im sure it will be much quicker delivery and will cost probably less too. Any ideas you have I would welcome. Thanks.
lamacchinadelcaffe.com/
Great Explanation! Thank you! I am curious about the Flow... whats your ml(g)/min in this setting?
when setting the paddle we set the minimum flow between 100-140gr in 20 seconds of delivery.
@@lelitinsider2977 thanks 🙏
@@lelitinsider2977 do you mean in full open position? Or full close position to have this ratio?
@@moryalex in full open position
@@lelitinsider2977 Thanks! Great video. What is the flow after 20 seconds? or did you mean that the minimum flow is always 5-7 gram per second? Also in full open position, does it replicate the flow in the stock Mara X without the flow control? Finally is the pre-infusion the same as the stock Mara X when fully open? Thank You!
I have bianca my problem when flow control is fully open give me 320 ml/30 seconds it cannot be decreased??
please, can you send a video at care@lelit.com ?
@@lelitinsider2977 I sent now please see it