I liked the way you explain every single thing and the way you films and do the job , because I am immigrants to US and my English is not perfect,, But your way of explaining I'd excellent .. Thank you
Hope things are operating properly for you. Just came across your video and would suggest you replace your 90 degree elbow above the trap where the humidifier drain goes down to your a/c drain with a T-fitting and have an 8 inch stand pipe installed and left open so you allow air flow for the drain to run freely. If there is no air gap left then the water draining could and probably will always backup and continue giving you problems. With the open pipe you can always pour some white vinegar into the pipe to help keep the mold from building up. Take care.
Am I the only one who screamed "Nooo!!!" at the computer screen when he said he was going to cut out the tab on the secondary outlet? Came here for the comments and didn't see any about it. Glad you left it alone. 😂
GREAT Video. I'm also in Georgia and having Drain Line issues This Year. After viewing a few videos, I can share that Your Video is exactly what I needed to see. Thanks again for all that you do.
I think everyone will agree that having an access panel to the evaporator is a really nice feature. This should be standard on furnace/ac combos where oftentimes the only way to see/clean the ac evap is through a whole-house humidifier (remove filter) or to cut a hole in the ductwork. 😢
You need a inlet that allows you to pour white vinegar into this drain line a couple of times a year. That will keep mold from building up in your lines. I also have a spray foamed home and live in Alabama. Had my issues with moisture. Installed a whole house dehumidifier about 7 years ago. It helps tremendously during the winter! I use my upstairs HVAC as a dehumidifier in the summer time. Since it's a 1.5 ton unit. I allow it to do most of the work during summer months. It keeps the house comfortable during the day. If the temp is set right on your upstairs unit. The dehumidifier will be unnecessary during the hotter months of the year. I also have those Goodman units. 😂 Definitely had problems over the years. Most HVAC professionals will tell you, they are fairly simple to replace parts on and overall cheaper to repair than the more complex systems.
Ive had my dehumidifier turned off for a few weeks this summer. With the air conditioner and and dehumidifier going, my house was actually getting too dry. That was causing us a few problems like dry skin and dry sinuses. I turned it back on about a week ago. We’ve had a lot of rain lately in Georgia so the humidity in the house was getting too high again.
@@BrantleyBlended What size tonnage are your HVAC units? I find during the shelf seasons of the year. That's fall to winter and spring to summer changeovers. I use the dehumidifier the most. Since those are the times when the AC cooling is unnecessary.
Thanks for the video help to understand better the safety switch installation , you know, some others guys recommend don't apply glue on the switch in case you have problems for bad switch and is going to be a headache replaced , but your video still great and util
I don't know if it was said or now. But instead of taking anything apart, and you knew where the drain exited the house, You should of gone there, rapped a wet drag around the pipe to get max suction from your shop-vac, and sucked the clog out there. Heck of a lot faster, easier, and cleaner, since I bet you'll be doing this quite a bit until everything's tunes in.
Who ever plumbed in the drain for the dehumidifier messed up. The purpose of the trap is to prevent air from flowing back inside the air handler and blocking the water from flowing out. You need to plumb the dehumidifier downstream of the trap or put it on its own trap. You also need a float switch for the dehumidifier. I put one in my drain pan that also has its own drain line. It clips on the outside edge of the pan.
You don't want to tighten it too much because it can cause the pan to crack. You should have kept the SS2 a little loose to the point where you can actually turn in slightly. The tape will make sure it doesn't leak. Plus if water does get into the switch; to avoid vacuuming it you can just twist is down and empty it. Certified
I think my favorite idea from TH-cam is put a cutoff valve above your u trap and install a Waterhose connector befor the u with a cutoff valve so you can just connect a water hose and send it
Do you think you would've had all the ventilation issues with the spray foam if you only used foam in the attic and basement then used regular fiberglass insulation on ext walls?
You know, I was gonna start this out by saying some derogatory comments regarding your meandering about spray foam. But, then I guess you're pretty smart for using the internet to fix your home on the cheap. Good job. I'm sure that you've convinced some manufacturers to hook you up or monetize this video. Btw, what is your average power bill? Did you G.C. your own home?
Power bill is $175 - $250 depending on time of year. I used a GC to build my house. I did some of the work myself. No manufacturers care about a tiny channel like mine. I pay for everything.
By putting the switch in the R wire you will kill both cooling and heating, In the heating mode you are not going condensate, but I can't tell you if there is a better place to put on a heat pump. I'd have to look at the wiring diagram to figure it out.
You had your tool up there. use tape and vacuum it out. No need for water unless youre cleaning the coil. LEAVE THAT THERE. It's the secondary hence why its blocked off a bit.
Also u must have enough fall to supercede the water column of the return . In layman terms the ahu has a negative pressure, if u have 2 inches of negative pressure w.c. u must have that much fall before the p trap. It's not all cut and dry .I've seen contractors make the same mistakes. If they only would not he proud and read the Manuel and code book they would be ahead of future problems. I'm not a Eisenstein, just a old mechanical contractor that god has lead through the years of a fantastic trade.
It's the 2ndary over flow drain , code requires. The secondary to run out over a widow to alert owner that main drain is clogged. A flag for the inspector. Better safe than sorry. Mechanical contractor since 1980. A proper drain means a lot u don't want the water to overflow into the ahu then to the emergency drain pan.u wNt the overflow to come out the factory secondary drain then to the em drain out out over window.
Interesting … you’d think (or, I’d think … ) a float switch would be part of the system already. I’m learning that’s not the case. My attic unit leaks, and the pan beneath it overflows. Now I’m considering a 2nd float switch, that kind you have in the line and and a pan switch at the bottom … because water coming downstairs is a really bad day. Maybe just wire the pan switch to an alarm that says, “Hey moron, turn off the A/C now!!”
Do you have open or closed cell sprayfoam in your home? I seen your other video about your opinion on sprayfoam I disagree. Look up build tight ventilate right if you having problems with being uncomfortable in your home it should be the hvac guys fault for not ventilating your home properly
What a waste of time! Next time it plugs up just use a shop vac on the outside drain. This is a very common problem with mini splits. It’s a good idea to make this a spring cleaning chore every year. That overflow should be knocked out and the wires should go in between the red wire to the thermostat
The so called "pros" hate to see DIY homeowners keeping that money instead of putting it into their 'professional" pockets! That air handler belongs to you and you can do whatever you want with it!@@BrantleyBlended Very good video.
I liked the way you explain every single thing and the way you films and do the job , because I am immigrants to US and my English is not perfect,, But your way of explaining I'd excellent .. Thank you
I’m not an immigrant born in the United States and I still appreciate everything that he broke down in this video
Hope things are operating properly for you. Just came across your video and would suggest you replace your 90 degree elbow above the trap where the humidifier drain goes down to your a/c drain with a T-fitting and have an 8 inch stand pipe installed and left open so you allow air flow for the drain to run freely. If there is no air gap left then the water draining could and probably will always backup and continue giving you problems. With the open pipe you can always pour some white vinegar into the pipe to help keep the mold from building up. Take care.
Am I the only one who screamed "Nooo!!!" at the computer screen when he said he was going to cut out the tab on the secondary outlet? Came here for the comments and didn't see any about it. Glad you left it alone. 😂
Haha! I almost cut it out but decided against it at the last minute.
I wanted to scream too. Fortunately he figured it out logically. I was impressed with that.
Yep......me too. If he had knocked out that little baffle/restrictor the safety switch would have prematurely broken the circuit.
I started laughing my ass off when he said he was going to do that x'DDD
I was like, no he's not gonna do that is he? Lol
Excellent explanation! I've been curious for a while about how to wire one of these OF switches on my Goodman unit and now I know. Thank you!
You seems like pro. You know what you are doing. Better than me. I just started HVAC course.
This is the only video that really show how to connect this SS2, thanks.
GREAT Video.
I'm also in Georgia and having Drain Line issues This Year.
After viewing a few videos, I can share that Your Video is exactly what I needed to see.
Thanks again for all that you do.
Good job
I am happy you uosed your common sense
Good thing you didn't break the overflow
I think everyone will agree that having an access panel to the evaporator is a really nice feature. This should be standard on furnace/ac combos where oftentimes the only way to see/clean the ac evap is through a whole-house humidifier (remove filter) or to cut a hole in the ductwork. 😢
Your right pw, it does your customer a good service. A clean well maintained unit last longer and consumes less energy.
You need a inlet that allows you to pour white vinegar into this drain line a couple of times a year. That will keep mold from building up in your lines.
I also have a spray foamed home and live in Alabama.
Had my issues with moisture.
Installed a whole house dehumidifier about 7 years ago.
It helps tremendously during the winter!
I use my upstairs HVAC as a dehumidifier in the summer time. Since it's a 1.5 ton unit.
I allow it to do most of the work during summer months.
It keeps the house comfortable during the day.
If the temp is set right on your upstairs unit. The dehumidifier will be unnecessary during the hotter months of the year.
I also have those Goodman units. 😂
Definitely had problems over the years. Most HVAC professionals will tell you, they are fairly simple to replace parts on and overall cheaper to repair than the more complex systems.
Ive had my dehumidifier turned off for a few weeks this summer. With the air conditioner and and dehumidifier going, my house was actually getting too dry. That was causing us a few problems like dry skin and dry sinuses. I turned it back on about a week ago. We’ve had a lot of rain lately in Georgia so the humidity in the house was getting too high again.
@@BrantleyBlended What size tonnage are your HVAC units?
I find during the shelf seasons of the year. That's fall to winter and spring to summer changeovers. I use the dehumidifier the most. Since those are the times when the AC cooling is unnecessary.
Thanks for the video help to understand better the safety switch installation , you know, some others guys recommend don't apply glue on the switch in case you have problems for bad switch and is going to be a headache replaced , but your video still great and util
Nice work. FYI. They also make 90° pvc Traps that have a removable clean out drain at the bottom of the trap instead
That is your secondary drain ,which the plastic is part of the pan to put the water level higher which makes it the secondary
Thanks for your help!
I don't know if it was said or now. But instead of taking anything apart, and you knew where the drain exited the house, You should of gone there, rapped a wet drag around the pipe to get max suction from your shop-vac, and sucked the clog out there. Heck of a lot faster, easier, and cleaner, since I bet you'll be doing this quite a bit until everything's tunes in.
I’ve seen a number of videos explaining that process and is a recommended method.
Who ever plumbed in the drain for the dehumidifier messed up. The purpose of the trap is to prevent air from flowing back inside the air handler and blocking the water from flowing out. You need to plumb the dehumidifier downstream of the trap or put it on its own trap. You also need a float switch for the dehumidifier. I put one in my drain pan that also has its own drain line. It clips on the outside edge of the pan.
You don't want to tighten it too much because it can cause the pan to crack. You should have kept the SS2 a little loose to the point where you can actually turn in slightly. The tape will make sure it doesn't leak. Plus if water does get into the switch; to avoid vacuuming it you can just twist is down and empty it. Certified
BTW 78° isn't hot .. but, I'm sure it's hotter in the attic..
I think my favorite idea from TH-cam is put a cutoff valve above your u trap and install a Waterhose connector befor the u with a cutoff valve so you can just connect a water hose and send it
Do not knock that out you will be in trouble
Do you think you would've had all the ventilation issues with the spray foam if you only used foam in the attic and basement then used regular fiberglass insulation on ext walls?
Haha TH-cam certified. I had to have qualified a long time ago. I want my certificate!
The AC drain line SHOULD BE easy to Clean Out when Properly installed 👍😅. When NOT installed Correctly then it's a Mess 😕😔
You know, I was gonna start this out by saying some derogatory comments regarding your meandering about spray foam. But, then I guess you're pretty smart for using the internet to fix your home on the cheap. Good job. I'm sure that you've convinced some manufacturers to hook you up or monetize this video.
Btw, what is your average power bill? Did you G.C. your own home?
Power bill is $175 - $250 depending on time of year. I used a GC to build my house. I did some of the work myself. No manufacturers care about a tiny channel like mine. I pay for everything.
By putting the switch in the R wire you will kill both cooling and heating, In the heating mode you are not going condensate, but I can't tell you if there is a better place to put on a heat pump. I'd have to look at the wiring diagram to figure it out.
Is teflon tape really needed on plastic fittings?
Another thing I forgot to say was i would go with closed cell foam instead of open cell. Open cell foam does not have a vapor barrier closed cell does
You had your tool up there. use tape and vacuum it out. No need for water unless youre cleaning the coil. LEAVE THAT THERE. It's the secondary hence why its blocked off a bit.
If you remove that piece of plastic that shut off would constantly fill and your unit would not run
Also u must have enough fall to supercede the water column of the return . In layman terms the ahu has a negative pressure, if u have 2 inches of negative pressure w.c. u must have that much fall before the p trap. It's not all cut and dry .I've seen contractors make the same mistakes. If they only would not he proud and read the Manuel and code book they would be ahead of future problems. I'm not a Eisenstein, just a old mechanical contractor that god has lead through the years of a fantastic trade.
Pulling air from above at the humidifier.
Good job!
It's the 2ndary over flow drain , code requires. The secondary to run out over a widow to alert owner that main drain is clogged. A flag for the inspector. Better safe than sorry. Mechanical contractor since 1980. A proper drain means a lot u don't want the water to overflow into the ahu then to the emergency drain pan.u wNt the overflow to come out the factory secondary drain then to the em drain out out over window.
I want a filter door like he has can I get it aftermarket for a Goodman
Did the compressor stop running when you lifted up the float?????
Yes, the whole HVAC system shuts down
Interesting … you’d think (or, I’d think … ) a float switch would be part of the system already.
I’m learning that’s not the case. My attic unit leaks, and the pan beneath it overflows.
Now I’m considering a 2nd float switch, that kind you have in the line and and a pan switch at the bottom … because water coming downstairs is a really bad day.
Maybe just wire the pan switch to an alarm that says, “Hey moron, turn off the A/C now!!”
went to my attic and i see bats
Why is there no condensate pump?
Gravity does the work of draining the water from that attic location.
Noooooo don’t knock off that eyebrow on inside the secondary !
Do you have open or closed cell sprayfoam in your home? I seen your other video about your opinion on sprayfoam I disagree. Look up build tight ventilate right if you having problems with being uncomfortable in your home it should be the hvac guys fault for not ventilating your home properly
Open cell foam
Should be a running trap. Just call the installer boss and send him a bill of $8000.00 and he will fix the situation immediately.
What a waste of time! Next time it plugs up just use a shop vac on the outside drain. This is a very common problem with mini splits. It’s a good idea to make this a spring cleaning chore every year. That overflow should be knocked out and the wires should go in between the red wire to the thermostat
10:44
Leave it in there
Need to eliminate those unions. Come off the unit with a new p trap and clean out tee
Put bleach in the pipe monthly bud!
Dude. Leave you air handler alone and call a professional. You will be doing yourself a big favor.
A “professional” installed my hvac units and did a terrible job. I don’t think too highly of most “professionals”.
The so called "pros" hate to see DIY homeowners keeping that money instead of putting it into their
'professional" pockets! That air handler belongs to you and you can do whatever you want with it!@@BrantleyBlended Very good video.
Pretty sure it's harder to find an honest technician who's willing to diagnose/repair the unit