Covert Instruments Arbiter Lock Bypass Set
ฝัง
- เผยแพร่เมื่อ 22 ธ.ค. 2023
- Product link (not sponsored): covertinstruments.com/product...
Remember: only pick locks that are yours and that are not in use! Keep locksport legal!
Contact me at: locknoobcontact@gmail.com
Support my channel! T-shirts and merch:
teespring.com/stores/lock-noo...
Lock Noob lock holder for 3D printers:
www.thingiverse.com/thing:288...
Lock Noob pinning tray for 3D printers:
www.thingiverse.com/thing:286...
#locksport #lockpicking #locksmith #pentest #hacker
![[1540] “Must Have” Tool For Commercial Glass Doors](/img/n.gif)
first pls pin or fav im also subed im a huge fan
Haaaa!!!!!
LN have a an early Christmas present 😉
You are 100% correct; that the Adams Rite Bypass tool has little application in the UK or anywhere outside of the USA due to tighter keyways, but the double hook tool for commercial doors is more relevant than some might expect - huge number of these on shop door fronts...
Great review BTW.
Yours is the first time I've seen the 'walking nubs' explained; now they make sense. Bypasses aren't SPP but can be fun too. In some of my work, getting access non-destructively is the goal however it's done. The folding hook works for older 'Adams-Rite' store-front door locks, but their newer ones are shielded and the through-the-keyway hook access is blocked too. Still a lot of old ones in use here in the US.
They are actually for the security bolt in the United States door locks. There is a pin infront of the lock that when depressed stopped the latch from being slipped, but sometimes the door is installed incorrectly and you can use that to push on the pin to have it fall into the latch hole for the door, letting you then latch slip the door
Another Covert Instruments review. This time we look at the Arbiter bypass kit!
Excellent review my friend, and may I wish you and your family a peaceful Christmas ;-)
Where can I get this kit?
The walking numbs on the latch card are actually for the security bolts in the United States door locks. There is a pin infront of the lock that when depressed stopped the latch from being slipped, but sometimes the door is installed incorrectly and you can use that to push on the pin to have it fall into the latch hole for the door, letting you then latch slip the door
The Covert Instruments Stuff shows the Thought that went into it. But I noticed the same thing with my case from the Echelon-Set... Thanks to the very strong Neodymium Magnet inside, it will sooner or later magnetize any and all Steel-tools you Store inside. So far I've had no problem with that while Picking, but I think It could pose a problem in some special Locks, so its best to keep that in mind.
Anyway Nice Video as usual, thx
Merry Christmas. Thanks for a year packed full of great information. 🇺🇸
Another great in-depth review!!
Keep 'em coming!!
I have most of what you spoke of but not the Credit card style tool. I do like you show what each tool is and how to use them. At least it gives me a better understanding that I was using the wrong tool for the situation.
I like your videos they are helpful
You’re supposed to open it up then stick it to something metal like a door frame that your working on the lock on so it’s open and you can get and out back the tools as you use them.
Also covert instruments does sell their own patches. They even sell a patch that’s a pinning tray that you can actually use right on the case so it’s a useful patch.
You know how you were walking the latch you can use the travelers hook to something semi similar like it kind of digs I to or grips the metal then you turn your wrist kind of pushing the latch into the door.
Peterson sells a shield breaker for American Locks.
The hole idea on the latch slipper was very good. I also like how you mentioned the fit and finish. You always have very good ideas. I hope you share them with manufacturers like Covert Instruments.
Have you heard of the k-tool. I just learned of them today. Firefighters use them.
Tuanks for the rundown. I just got my arbiter today and i wasn't sure exactly how the two commercial tools worked. This was a fabulous demo as well as review.
Great bit of kit mate 👍👍
Those decoder tools. So thin and bendy and good, you told us twice! Merry Christmas, mate.
Very cool, and thank you for the demonstrations!
fantastic video. so educational. i don't even own this set and found your run through incredibly accessible. Thank you so much.
Excellent man, your presentations is standard for high quality.
Thanks for the review!! Merry Christmas everybody‼️⛄️🎅🎁🎄
Nice review. It's good to see that they do ship to the UK. I've got a couple suggestions; For the decoder tools I too would like two feeler tools, one for each thickness, where there isn't extra thickness in the handles and the last half inch of the tips are angled down to a point, where the 'point' has a 2mm flat filed on the end. I did this with the Dangerfield decoders (which are shipped with smooth rounded tips) to make feeling the ridges easier. Also, I would like the notches on the notches decoder tools to have an angle from the shaft nearer 90deg instead of the symmetrical V. It would be nice to have the American lock bypass tool in Left handed as well as Right to fit through Left handed warding. Drilling a hole through the corner of the door latch slip tool for a pull strap would be great too.
This is exactly the video I was looking for. Thanks!
Thanks for an excellent review.
Merry Christmas!
Nice kit! Thanks for sharing Ash and take care. I hope you, micro and mini have a very merry Christmas.
thank you LockNoob
Great video Ash mate 👊👍😎😊🇬🇧
Great review, Happy Christmas and keep up the good work 👍
I have the genesis kit and I put black heat shrink on all the handles, it makes them easier to grip and they look a little better.
I did the same on the tools in the video.
For me personally, I think the latch tools are not so good in the uk market as our doors tend to open in, so you have a door stop in the way, the adams rite with the 2 wings is a very nice tool, the locks they are for were very common in the 80's, the padlock tools great, as you said a 3rd tool would be most helpful.
Thanks for sharing. 👍
As always a superb review.
We must have been thinking on the same page as all the things you mentioned that would be minor tweaks, I was thinking exactly the same thing.
Have a wonderful Christmas with your family good sir.
I like the idea of the set, but it does seem to be quite specialised. Cool if you have a lot of stuff it would work on though. :o)
They NEED TO make a titanium version of the American Bypass driver. Best working Bypass driver I've had, meaning it actually works unlike The Sparrows. Only thing is my CI bypass driver already broke and I got it on Black Friday.
I would say this set isnt just the US market but all of North America and probably central and south America as well.
Lock Noob it's the best 👍👍
I bought a Genesis set from Covert In., and found the picks easy to bend ..... too SOFT
Been using mine for a year with absolutely zero trouble
I noticed you didn't show the latch slipper in correlation with the travelers hook
Possibly already a video and I just haven't found it but if not a video on using the notched decoder to decode not bypass a padlock like a M176 would be appreciated. I have mostly found bypass videos.
You can’t decode the 175 and 176 with the notch to my knowledge, they work differently inside.
👍🏻
How much did you get it for on the Black Friday sale? I want to know for next year's possible % discount. 💰
You can get a Chinese lock pick set similar and polish the picks. It's a company run by a lock picking TH-cam channel. It's a scam according to my cousin who's a licensed locksmith.
🎄🙏
Ive bout the arbiter kit am I the only one not able to properly use the bypass driver I have watched video after video I I sent it straight clicks after wiggling and I can not turn it I am using an 1100 American lock
wow, im second. now you know i am a hardcore fan of you.
Halo Mr. LockNoob. Ich wollte Lishi für EU zilinder kaufen. Ich wollte Ihnen fragen welche Arten von Lishi sollte ich besorgen. Danke für Ihre Antwort. Lockpicker Pegasus
Good review!👍😀🐾🐈🐈⬛🐾🇬🇧🍻☃️
Love the idea of a bypass kit, not so sure about the tool style or price.
Notched decoders an advantage? Locknoob hasn't sold me on the concept. Travellers hook and card bypass? Don't know about that. I like that case though.
I'd go with a couple of decoders, mini-jim, thumbturn bypass drivers, mica sheets, shank/knife, and maybe adams rite and American padlock bypass.
That lever-latch tool though ❤
Going to wait for that as a separate.😊
6:34 was it intentional or accidental? Anyway, nice to see you 😀
It's not the first time he has shown his face. During the beginning of his first live, he accidentally flipped the camera around (assuming he was using his cell phone, he hit front view instead of forward) and gave us a complete full on face shot. I'm 99% sure it was before the live was being "recorded" so it isn't in the replay at all.
Enjoy the set. You might not find any tools made of a better metal.
Try looking at Law Lock Tools if you are wanting quality steel
@@barryabell5410 Warwood Tools for axes, sledgehammers, and pry bars.
Every time you say America/USA please please continue to use the eagle and the flag. Lol
Really pumps us Americans up 🇺🇸
My cousin is a licensed locksmith and says that that company is a scam. It's associated with a lock picking channel.
Merry Christmas too you and God bless 🙏🎄
'Scam' in what way? I would say, sure it's more a locksport hobbyist outlet than a pro tool supplier, but the tools do exist and locknoob here shows that when you pay for something, it does get delivered. I have the opinion that the company owner is mainly doing their best to encourage the hobby, raise funds and pressure the lock manufacturing industry to update and improve locks that have insecure out of date mechanisms. I applaud that on all counts. It's helped me look more closely when choosing locks for actual security purposes.
How is CI a "scam"? Their tools aren't junk, they're priced commensurately with the rest of the industry, and they currently have the best BOK turning tools out there, IMO. I'm not saying CI makes my favorite picks or sets (they don't) ; and they seem to heavily model their design after MultiPick (laminated popsicle stick style) but they're legit 100%.
Another pile of useless junk, nothing there that some wire and a plastic bottle won’t do the same thing !!!
Decoder? lol. Lock pick for pin and wafer locks. Cheapest pick set iv'e ever seen lol and I'm a Master locksmith. Haha. Did you forget about the deadbolt? for latch slipping devices? 🤣
I am glad you are not a 100% fan boy when it comes to this company. Nothing is perfect. I bought this kit knowing I wouldn't be using some of the tools but still wanted them for my collections. I am going to add a hole in the latch tool like on OscarDelta's now discontinued Hookitool.
An euro version would be nice