I am sure the radios volume control, adjusts the power output to the blue tooth mic (receiver). Just like other wireless devices. I have always found that my blue tooth devices, have to be in close proximity (10' - 20') to each other, to work effectively, with out the signal strength being choppy and lossing connection. It seems to be the nature of the beast!
The radios volume control does adjust the level to the microphone. Like a master control in a way. I also found if you don't want it to sound like garbage, the happy medium for my radios was about 1/2 or slighter higher, the way up on the radios volume. Wouldn't want to overmodulate the mic. Thanks for your findings regarding the bluetooth proximity. I would say 35 ft would not be a reliable signal, but as you said, within 20 ft or so; there shouldn't be a problem. Thanks for commenting.
I’ve a couple of these Bluetooth mics and I got to say overall their ok, however I use the midland Bluetooth mic for the midland cb talk app while I’m away all week in the truck and apart from saving my license it brings the world of radio straight to me without all the loss of signal over a few miles. They are good but on occasions they do give some connectivity problems. Overall I’m quite impressed by the mic’s but for using on a proper radio, I’ll stay with my base mic.
might pair the microphone to a anytone radio with Bluetooth built in. might fix the cutoff issue. it would defiantly see if its the speaker or the dongle with the hesitation.
Unfortunately this BT adapter has mostly negative reviews on Amazon. Aside from that, the only good thing about this is the design because most others are flatter so the pins don't always maintain a proper contact. Pryme radio sells them as well. They're pricey but they don't go to sleep mode as others I've read about here. I had to buy a speaker mic extension for the BT adapter because of the flat design I previously mentioned.
Currently not available on Amazon, perhaps a result of all the negative reviews, averaging 2.5 stars. They made a good choice to design it for the Kenwood pin set, which is also used on Baofeng radios. Hopefully they'll fix the issues.
Great, informative video! I use a Retevis RT3S and bought a wired handset for it.... but... I never use the darned thing lol. I find having the HT alone is just so much less combersome. Isn't that the whole idea of a handhreld radio after all? Also because I use solely DMR I like to see the contacts info on the HT screen, something a handheld mic is yet to give us. Just my 2 cents worth. Thanks again and 73s to all.
I didnt hear what you suggested. Missing "cutoff" but the 10 meters is normal range for bluetooth and 10 meters is about 34 feet. I wonder if this device can use earbuds instead of the microphone using the radio vox function. I just wish someone would come out with a device that could be used with any radio.
I was interested in this but seeing how clumsily it’s connected to the radio I can see a few problems that won’t be chancing. Nice video though thank you 🙏
Thanks for the video. Do you happen to know if you can pair the dongle with wireless ear buds? I have one of my HTs programmed with local LEO and Fire. It would be nice to be able to listen wirelessly and without the rest of the family having to hear it. Thanks again.
Hi, I agree it's way to pricey considering the price of a radio... However, I was wondering about the connection to your phone, could you use it with DroidStar, Peanut or Zello? Does the PPT work properly. A know a lot of people in flats and so on can't put up antennas and want to use such apps. Would be a nice way to get a better experience and also leave the phone on charge.
I just downloaded Zello. Initial observations is that vox works through the microphone and the PTT will program within Zello, but I cannot get the PTT to activate after it's programmed. This may be a user error. I am going to continue to test today.
Can you connect to the radio plug in device with windows 10 or an android via bluetooth. That is the big question. Looking for a Mobilinkd replacement as I can't get one.
I do not think it will work like that. Sorry to say. Good luck. If you haven't, consider checking out my latest video "Your baofeng cable sucks" or something. This is a AIOC device. I have 30 on order to resell (for cost). They should be in within 2-3 weeks (hopefully). Good Luck.
Thanks for the thorough product review. Are you aware of comparable Bluetooth microphones? Im curious to see if the also clip off the first bit of the audio. Thanks! Guy AE6FE
Nice demo - thanks. Can you keep the bluetooth adapter in the radio continuously charging, say when using it in a car or at home and avoid the 4 hr battery issue?
The missing first syllable is due to the 'power saving' feature of older/less expensive bluetooth devices. The bluetooth device stops transmitting when there is no audio, and the 'vox' circuit kicks in when it hears audio again. I have a really cheap headset that does the same thing.. but i keep it around because it has good audio quality. I certainly don't use those for copying CW :)
So I bought one…hooked it to a Baofeng, what’s occurring is after the first 1-2 seconds of keying up a repeater the audio gets cut off as the repeater is IDing. I’ve watched your video and read the comments. The problem I’m having is the common one? Right? Does the audio in a conversation pick back up again? After awhile?…..thanks
Hey, I'm pretty sure I mentioned that in the video but don't have time to go back and check. The audio does cut off and I think it has to do with either the digital signal processing or something. As I recall, one of the things I did to improve the audio quality slightly, was to only have the baofeng volume up about halfway maybe even a tad less and it seems that helps a little bit. Hopefully I answered your question. Good luck!
@@HAMRADIODUDE yes it does thanks, and I did some more tests with it, it’s not that bad and depending on how you plan to use it it does work for the most part. Thanks for everything
It doesn't sound like they want to push it from a marketing standpoint, so I don't think they'll make anymore versions. I'll keep my eye out for others
Anyone know of a GOOD wireless (in ear) Bluetooth PTT solution that works with Motorola radios? I’d pay $100 bucks for one that actually works …can’t seem to find anything out there and So tired of looping wires through clothes and putting that scratchy clip on back of shirt collar for 12hrs a day. Anyone…anyone?
I would like to see them come up with a weather alert that has S.A.M.E. front face programmable or USB programmable in box style so that way it can be mounted like a mobile radio and I would like to see them come out with a a radio that does nothing but tone out, front face programmable or USB programmable also in box style so that way we don't have to tie up our bcd15X
Great video but why would anyone want to put even a $50 wireless mic on a baeofang handheld? I’m sorry but these radios are just not worth putting any money into other then maybe an antenna upgrade. Don’t get me wrong I have a uv5r and for $25 or $30 you can’t go wrong for your first ham radio, but do yourself a favor and put the $50 towards a better radio. I use handheld marine VHF radios all day everyday at work and I don’t see any reason why anyone would want a wireless mic on a handheld. Honestly I see it as a liability, if I had a buck for every time the mic fell off my shirt and the cord saved it from certain destruction I’d be rich 😂 Now I can see a wireless mic on your home base station. Not trying to offend anyone just my 2 cents. 73 🍻
I am sure the radios volume control, adjusts the power output to the blue tooth mic (receiver). Just like other wireless devices.
I have always found that my blue tooth devices, have to be in close proximity (10' - 20') to each other, to work effectively, with out the signal strength being choppy and lossing connection. It seems to be the nature of the beast!
The radios volume control does adjust the level to the microphone. Like a master control in a way. I also found if you don't want it to sound like garbage, the happy medium for my radios was about 1/2 or slighter higher, the way up on the radios volume. Wouldn't want to overmodulate the mic. Thanks for your findings regarding the bluetooth proximity. I would say 35 ft would not be a reliable signal, but as you said, within 20 ft or so; there shouldn't be a problem. Thanks for commenting.
I’ve a couple of these Bluetooth mics and I got to say overall their ok, however I use the midland Bluetooth mic for the midland cb talk app while I’m away all week in the truck and apart from saving my license it brings the world of radio straight to me without all the loss of signal over a few miles.
They are good but on occasions they do give some connectivity problems.
Overall I’m quite impressed by the mic’s but for using on a proper radio, I’ll stay with my base mic.
Great input!
I wouldn't be able to do ft8 without you dude
might pair the microphone to a anytone radio with Bluetooth built in. might fix the cutoff issue. it would defiantly see if its the speaker or the dongle with the hesitation.
Good suggestion. I don't have an anytone, but I do have a few bluetooth radios I will test tonight on stream. Thanks!
Unfortunately this BT adapter has mostly negative reviews on Amazon. Aside from that, the only good thing about this is the design because most others are flatter so the pins don't always maintain a proper contact. Pryme radio sells them as well. They're pricey but they don't go to sleep mode as others I've read about here. I had to buy a speaker mic extension for the BT adapter because of the flat design I previously mentioned.
Will this bluetooth adapter sync with any bluetooth device? looking for a solution to connect my bluetooth walker electronic earpro
Currently not available on Amazon, perhaps a result of all the negative reviews, averaging 2.5 stars. They made a good choice to design it for the Kenwood pin set, which is also used on Baofeng radios. Hopefully they'll fix the issues.
Great, informative video! I use a Retevis RT3S and bought a wired handset for it.... but... I never use the darned thing lol. I find having the HT alone is just so much less combersome. Isn't that the whole idea of a handhreld radio after all? Also because I use solely DMR I like to see the contacts info on the HT screen, something a handheld mic is yet to give us. Just my 2 cents worth. Thanks again and 73s to all.
I didnt hear what you suggested. Missing "cutoff" but the 10 meters is normal range for bluetooth and 10 meters is about 34 feet. I wonder if this device can use earbuds instead of the microphone using the radio vox function. I just wish someone would come out with a device that could be used with any radio.
Good review. I’ve had nothing but problems trying Bluetooth I’m my work environment when it comes to radio mics.
Thanks for the information. It's good to hear others experience with the Bluetooth.
I was interested in this but seeing how clumsily it’s connected to the radio I can see a few problems that won’t be chancing.
Nice video though thank you 🙏
Thanks for watching and I am glad I could help!
Not a bad little bit of kit!
Thanks
Gfsk wireless digital speaker is great for dmr boafeng dm5r 😅❤ speaker microphone.
Hi will this work with a Kenwood ts590sg?
That adaptor sticking out so far is a no go for me.
Thanks for the video. Do you happen to know if you can pair the dongle with wireless ear buds? I have one of my HTs programmed with local LEO and Fire. It would be nice to be able to listen wirelessly and without the rest of the family having to hear it. Thanks again.
Good question, I am not sure of this, but I'll experiment with a few things and get back with you!.
Hi, I agree it's way to pricey considering the price of a radio... However, I was wondering about the connection to your phone, could you use it with DroidStar, Peanut or Zello? Does the PPT work properly. A know a lot of people in flats and so on can't put up antennas and want to use such apps. Would be a nice way to get a better experience and also leave the phone on charge.
I just downloaded Zello. Initial observations is that vox works through the microphone and the PTT will program within Zello, but I cannot get the PTT to activate after it's programmed. This may be a user error. I am going to continue to test today.
@@HAMRADIODUDE Cool thanks!
@@HAMRADIODUDE did you ever have a chance to test further? I'm curious specifically if you were able to make the PTT button work
Works with zello? Nice video!
Can you connect to the radio plug in device with windows 10 or an android via bluetooth. That is the big question. Looking for a Mobilinkd replacement as I can't get one.
I do not think it will work like that. Sorry to say. Good luck. If you haven't, consider checking out my latest video "Your baofeng cable sucks" or something. This is a AIOC device. I have 30 on order to resell (for cost). They should be in within 2-3 weeks (hopefully). Good Luck.
Thanks for the thorough product review.
Are you aware of comparable Bluetooth microphones? Im curious to see if the also clip off the first bit of the audio.
Thanks!
Guy AE6FE
Good review. Thanks Dude
Thanks for watching!
Nice demo - thanks. Can you keep the bluetooth adapter in the radio continuously charging, say when using it in a car or at home and avoid the 4 hr battery issue?
I don't think. The adapter charges via micro USB
The missing first syllable is due to the 'power saving' feature of older/less expensive bluetooth devices. The bluetooth device stops transmitting when there is no audio, and the 'vox' circuit kicks in when it hears audio again.
I have a really cheap headset that does the same thing.. but i keep it around because it has good audio quality. I certainly don't use those for copying CW :)
Thanks for the information! I appreciate it and am happy to have learned something new!
So I bought one…hooked it to a Baofeng, what’s occurring is after the first 1-2 seconds of keying up a repeater the audio gets cut off as the repeater is IDing. I’ve watched your video and read the comments. The problem I’m having is the common one? Right? Does the audio in a conversation pick back up again? After awhile?…..thanks
Hey, I'm pretty sure I mentioned that in the video but don't have time to go back and check. The audio does cut off and I think it has to do with either the digital signal processing or something. As I recall, one of the things I did to improve the audio quality slightly, was to only have the baofeng volume up about halfway maybe even a tad less and it seems that helps a little bit. Hopefully I answered your question. Good luck!
@@HAMRADIODUDE yes it does thanks, and I did some more tests with it, it’s not that bad and depending on how you plan to use it it does work for the most part. Thanks for everything
do they have something for the Yaesu ft70d? Thank you
As of now, I only one of that model
It doesn't sound like they want to push it from a marketing standpoint, so I don't think they'll make anymore versions. I'll keep my eye out for others
Sounds good to me and I think it has so purpose in a few scenarios. :)
I am going to try it on a POTA today with my IC 705 (if it didn't snow) i can see that as being very useful for when I start doing pedestrian mobile.
Would it work with a Yaesu ft3dr?
I'm charging up the FT3DR now and will let you know later this afternoon.
@@HAMRADIODUDE cheers buddy
That is my weather guy too
Great review Dude.
Thanks! Glad you enjoyed it. Going to watch your video today!
Can you use the PTT button on the radio while connected?
I want to say yes. I will try in the morning and get back to you
Dude. Bluetooth has a DAC to convert analog to digital audio. That's where the 'hiss' went.
Think it might be compatible for an Icom ID-51 or 52A HT?
Most likely. it is working with the IC705 in Vox mode.
@@HAMRADIODUDE thanks for the reply and your videos, 73 and take care
Thanks. I'm going to hamcation next week and will bring this along to try, if I find someone with the 52a!
@@HAMRADIODUDE that would be great! Much appreciated, thanks and have fun there
Very cool!
Hmm, would it work with Zello?
I don't see why not, I can try tomorrow
Does it work with icom 52a? With or without dongle ???
I do not have a 52a, however it worked without a dongle on the ic705
@@HAMRADIODUDE can you make a video showing how it works without the dongle? That would be neat to see before buying it..
73
KO4UCO
Any chance this works on the IC705?
Good question. . I'll be trying tomorrow and will get back to you
SSM-BT10 with FT5DR junk! Only 3 meters and quiet sound.
Anyone know of a GOOD wireless (in ear) Bluetooth PTT solution that works with Motorola radios? I’d pay $100 bucks for one that actually works …can’t seem to find anything out there and So tired of looping wires through clothes and putting that scratchy clip on back of shirt collar for 12hrs a day. Anyone…anyone?
Have you tried the Motorola PMLN7120A Bluetooth Mic?
Foi bom
I'm sorry, I don't understand.
I would like to see them come up with a weather alert that has S.A.M.E. front face programmable or USB programmable in box style so that way it can be mounted like a mobile radio and I would like to see them come out with a a radio that does nothing but tone out, front face programmable or USB programmable also in box style so that way we don't have to tie up our bcd15X
That would be awesome.
No VOX ? 👎 THANKS! 3s&8s big strapper !
Great video but why would anyone want to put even a $50 wireless mic on a baeofang handheld? I’m sorry but these radios are just not worth putting any money into other then maybe an antenna upgrade. Don’t get me wrong I have a uv5r and for $25 or $30 you can’t go wrong for your first ham radio, but do yourself a favor and put the $50 towards a better radio. I use handheld marine VHF radios all day everyday at work and I don’t see any reason why anyone would want a wireless mic on a handheld. Honestly I see it as a liability, if I had a buck for every time the mic fell off my shirt and the cord saved it from certain destruction I’d be rich 😂 Now I can see a wireless mic on your home base station. Not trying to offend anyone just my 2 cents. 73 🍻
didn't expect much. the radios are junk and seems the mic is junk.
Thanks for watching
Great video Dude
Thank you, sir