How to Resurface Clutch Pressure Plate | Lining and Polish of Pressure Plate
ฝัง
- เผยแพร่เมื่อ 24 มี.ค. 2021
- Welcome to Wondering Skills.
Subscribe the channel Pakistani Trucks and Press Bell Icon for getting notification of My channel Wondering Skills videos.
How to Resurface Clutch Pressure Plate | Lining and Polish of Pressure Plate
#pressureplatelining
#polishpressureplate
#wonderingskills - ยานยนต์และพาหนะ
![CAMPปลิ้น | EP.77[1/2] ก็ไม่ได้ชอบเอาชนะ แต่เรื่องอะไรต้องแพ้!!](http://i.ytimg.com/vi/JraaBYOd7I0/mqdefault.jpg)
These gents do a hell of a job with the equipment they have! Most mechanics and, or machinists wouldn’t try to fix this issue with primitive tools and equipment. These guys are lucky to have the items they need basic as they are. Good job, thanks for the video.
the problem with using a grinder for facing all the clutch is that grinding stone is constantly shrinking so your cut comes out at a slight angle
Very tru
Exactly what I was saying/thinking through the entire video.
@@markarita3 Yeap... I thought the same. If they adapted a grinding stone........
works for surface grinders
I know its not the same, but the same principle
@@rexaitken Surface grinders barely kiss the surface (or at least, they should). That plate should've been machined, not grinded.
Interesting your creativity, remembering that it is not the correct one, but only we know our needs. Greetings from Brazil 🇧🇷
i like his safety squints and his invisa steel toes also nice use of his eyecrometer when setting up the plate
haha😂
“Eyecrometer” 😂😂😂😂you shootout
Specialist equipment
Eyecrometer 😄 🤣 😂
The guy is an employer not an employer. He uses the tools and procedures he was given/taught. Stop giving shit about the fact that he was born in a 3'rd world country. Like someone else was saying he gets the job done, regardless of the fact that he doesn't have all your fancy tools and safety procedures...
Диск в утиль. Он весь в трещинах. ТБ на высшем уровне.
А образива для станка очень полезна😂
Да и вообще резец в станке на х.я ставится?
Как говорится из г0вна в г0вно по красивее!🤣🤣🤣🤣
Great video 👍
That's a very creative use of what you have to give life to an old part, maybe wear some safety glasses and protect the inner working of the lathe.
Maangye ustaad
Great job
👍
this is the cleanest shop yet, with newer equipment. nice!
Unbelievable. Never imagined such a special purpose machine. Yes, care needs to be taken on the wear of the angle grinder wheel for flatness of the clutch surface. Awesome application/ approach though. We all can work on it. Much respects 🙏✊✊✊✊✊
Great Idea!
Fun to watch👍👍👍👍👏🏻👏🏻👏🏻👏🏻
It's only pressure plate don't deserve red carpet in our these guys good job
I like the grinder set up!
So good to see hands on work
Amazing skill complete
Guys, protect the lathe ways from grinder grit.
I would be more worried about the 100 pound parts they keep dropping on them.
And weld splatter🤣
These guys use the lathe as ground when welding on it. It’s basically ruined already. They don’t care if the ways wear and it turns tapers
And use a mask!
Eye protection? Grind and grind ... but cracks still there ... stupid waste of time ...
💯/💯👍👍طريقة جميلة... احسنت وفقك الله
Видео 👍, персонаж просто гений своего дела😁.
Great job!
Amazing broo.. 👍
Masha Allah bohat khob bhai Jan
excelente video saludos from Chile, pero faltan eye protection
You are jenius man👍
Was glad to see him use a straight edge after grinding because even though I am NOT a machinist I would not expect the flex in the grinder setup to flatten/true the flywhell like a rigid cutter head would. But, he could tll more about how untrue the surface was and I guess he determined the he did not need to cut it to true it.
Nice, goodjob frend
nice and clean machine!
That' is great style very good my dear brother ❤
Excellent work
👍👍👍👍👍thank you for sharing
A very effective idea for grinding the clutsh plate when using an angle grinder. Congratulations 👌.
Thank you 😀.
Thank you very much. periyakulam.pichaimani mec tamilnadu S.India
Pakistanis learned a long time ago that cracks make the gripping force that much better😊
Agree ☺️
Right
Сразу видны технологии сверх людей
Сначала увидел резец на токарном,подумал -"Что то новое"
Ан нет,прицепили болгарку и погнали точить...
Но парадокс в том что работает,если бы не работало,то не делали бы!..
С языка снял
👍
Torno semi novo, parabéns por cuidar da sua ferramenta de trabalho
Good job!!!
Wish you success in your life...
Good idea👍👍👍👍
thank You
Thanks for video keep going 🤠 greeting from Morocco
💗
Que buen ingenio, le sugiero usar protección ocular.
Pakistani work force is very talented......
bravo, molto ingenioso,,
very good indeed!
you gentlements do very good werk, deepest respect!!!
Great 👍
Thanks
"Нігде не бьйот, везде берьотъ!" (ДМ)
ДМ тихонько плачет в сторонке
Дикий народ
@@alexfisonlife зачем плачет??? может тихо конспектирует дабы не забыть ))
это он еще сож не включил)) Направляющим станка от абразива хана, легким токаря хана, диск сцепления в трещинах
Ёбушки-Воробушки! А мы индикаторами и точным инструментом пользуемся!!! Вот теперь знаю как протачивать надо!
Не вздумай. 😁 Я расскажу дядьке Максиму. Он тебя наругает.
Это корзина сцепления ооочень старого образца там пружина регулируемая болтиками, покрутят и ничего бить не будет)) А вот сам способ точнуть болгаркой мне понравился...резцы целее будут))
А как выставить по индикатору искривленную деталь?
@@1aleksiv искать базу...
@@user-rr3xi7hq7k где,в тундре? обработанная сторона искривлена,а обратная сторона литьё. Где её искать? Он нашёл правильно,касанием резца. Другое дело,нужно балансировать.
I'm from Vietnam, nice to know you're passionate about mechanics 👍👍 let's share experiences together🤝💯
Cool 👍
Love the guarding, the toe tectors. as for the truing obviously hasn’t got a clock, but what the hell it was cheap
Lol when he put the grinder in the tool holder I lost it 🤣
ماشاالله زبردست
Jazak Allah
Super dear bro In our lathe we do cutting tool we use big griending wheels
I take it most people retire both young and blind from this profession over there.
Гениально!
Good job reusing what u have
Even if it was a proper resurface (which it was not, the grinder stone shrinks as it grinds) the plate is still thin after the "repair" a more important it is still cracked.
That's a very first world observation. AKA correct
Sometimes that is the best they can do with the gear on hand.
Interesting use of a grinding wheel to resurface a clutch pressure plate.
Great video, thanks for posting and sharing. I am long time subscriber. Your skills and adaptive methods amaze me more and more each day. May GOD bless you all.
ល្អGood😍🇰🇭
precision, i like it 👍
🤣🤣🤣🤣
Absolutely hilarious!
I know right. Should be titled "The part that got me fired for passing as good".
Наилютейший чувак. В России с индикатором не все могут выставить
Глаз набитый осталось морду набить!🤣🤣🤣
like the way u held the grinder
Баракалла йигитлар узбек техно дан салом
Well that's nice. As the abrasive media wears from the grinder its diameter decreases making a minute curve in your part. WTG!
I like that his shirt has a collar. Classy. Don’t always see that in a place like this...
Hope it is useful, good job 👍
Best possible finish when lathe spindle running in reverse and using machine driven cross feed. But you're doing what you can with what you've got. Dial indicator and dead-blow hammer would help setup.
There are no dial indicators in Pakistan - any instruments that have needles in them are considered Haram - against Islamic Policies.
Pretty much any good shop practice would be an improvement but Pakistan.
Couldn't agree more. I used to get best results using a stone in my air grinder. To have a nice lathe and no dial indicators is strange.
@@TheFeller1554 yes you are right i have much better improve know i made every instruments cnc machine
Widziałem już,po pierwszym filmie , że dla was nie ma rzeczy niemożliwych do. zrobienia.Pozdtawiam z Polski.
muito interessante e inteligente e esperança quem está no chão de oficina aprende muita esperança enterecante gostei é uma produção que ainda quero aprender torneiro mecânico
Svaka cast nemogu da Verujem to nasi strugari u Srbiji nemaju Pojma👍
Genialnie😆
Nice
Good
Very good idea of a makeshift tool post grinder. If the grinder had a third support I guess it would make it more steadier.
Excellent, I love how you make tols to the job. زه خوښوم چې تاسو څنګه د اسانه کار کولو لپاره تول جوړ کړئ، تاسو هلکان ډیر هوښیار یاست مبارکي. له امریکا څخه
Nice
After watching the video, I want to try to put the flywheel on a LP turn table and grind it with a wood block and sandpaper
.... do not wonder if you get a better result after all !
Пуканы горят у экспертов. Class!
🤣🤭💪
😄😄😄
OK. , LIKE amigo . Brasil .
Idea💭
Es la primera vez que veo un video de este tipo con algo nuevo(torno) jaja
nice
Good wok
O sistema é bruto.
Need to get some covers made to catch all the grinding dust. It mixes with the lubricants to make a grinding paste that will wreck your lovely new lathe. I use old bits of carpet with sticky old grease to catch all the dust. Works well and protects my lathe guides. Cheap but very effective.
Look at the rest of the shop! Look at the part that I would assume, being he took it out of the chuck and threw on the floor, to be done. I think grinding dust on the ways is the least of their concerns
Mistrzowie,wielki podziw dla inwencji twórczej,fachowcy
من الاردن تحية لشعب باكستان الذكي
Всё нормально! Теперь, с большой вероятностью, мобиль при трогании будет биться как припадочный, и диски менять придется ежеквартально 😁
Это корзина сцепления ооочень старого образца там пружина регулируемая болтиками, покрутят и ничего бить не будет.
@@user-rr3xi7hq7k болтиками регулируются лапки. Поверхность нажимного диска должна быть плоскопараллельна маховику, чего подобной обработкой добиться довольно сложно.
@@vofn5092 плоскопараллельность задаётся при монтаже на вал.
Sir great work
Ek video broken propeller shaft & allinement repair ki bhi bnao
InshAllah wo kam nazar aaya to bana den gy
Это токарный и круглошлифовальный станок.
Mashallah
I wish I could emigrate to Pakistan to learn from you.
Thanks my brother, I wish to settle in Skardu, im from south africa.
First step..... get rid of your steel toes and safety glasses....next step.....get loose fitting long sleeves around the lathe.....3rd.....leave the t-handle in the chuck and turn lathe on.
I think you will learn more and the right way to b a turner
Презентация нового обрабатывающего центра!
As a machinist, I see a few issues. The first one is the lack of safety glasses. The second one is over tightening the clutch as it can cause premature wear on the jaws and other internal parts.
Lastly, trying to hold the pressure plate or brake rotors using the chuck jaws will not ensure a continuous even cut. The vibration and harmonics of cutting will cause unwanted movement in your work piece. A piece of rubber strapping or anything to absorb the vibration around the device will help somewhat but not eliminate it. Andy 🇨🇦
It’s not a Space Shuttle. It’s a truck serving the ignorant people of Third World. A place where life is cheap and easy to replace.
Wow
I love the lathe clutch!
Good job guys.
First a quick dial indicate & tap in plate as you spin and tighten .Use a good carbide coated insert face off .007 true and take a spring pass back over the same cut flatness and finish will be .010 r.m.s aprox with no taper..plus you will save the ways.from grit..also you will never get hert if wheel breaks up on a cut ...good video.