Out doing some testing wanting to see where I can push this motor too stay tuned for more we will see how it does enjoy #EVERYTHINGFORE #Testing #RcFun
Been in the rc game for years now but only with bashing and crawlers. Getting into the drag scene and there’s so much to learn. Wow you wouldn’t think it would get so complex! But great vid I’m learning a lot form your content thanks
Nice hits on that 6400. I'm going to be testing 3s on there 3800kv tomorrow. My club has a outlaw 1/10 class but no higher than 3s. You can use BSR 1/8 foams with prep. Iuse purple foams.
Try a 26 pinion and 81 spur change to 49000 end timing in cheat mode . Weather is bad here so I can't try it but I was running 2.5 with 25 / 75 but only getting 38000 rpm so I changed to the 26/ 81 . Have to wait for Wi weather to try it out. let us know how this works.
@@RcFunDrizzy Yes Undercover Iceman DR10 conversion. with Exotec slipper eliminator . Well it is a 8.1 FDR ratio. I read that with that motor we should be looking at getting 49000 rpm (I know its a 75000 motor but thats what I read from the guy running 1.9s with it). I was at 22 degrees starting lower and plan to work my way up. Too cold and rain and snow in WI so I only got one day in so far testing.
Been in the rc game for years now but only with bashing and crawlers. Getting into the drag scene and there’s so much to learn. Wow you wouldn’t think it would get so complex! But great vid I’m learning a lot form your content thanks
Appreciate that And glad I could help I will have some more Drag content coming soon waiting on a few things
right? Punch control, torque limiting, cheat timing on esc/ motor timing,........ these are the things
Nice colors
Thanks I liked it too
cool rc and drag pulls,nice tuning
Appreciate that Duke thanks for tuning in
Great video nice car cool channel
Appreciate that and thanks for tuning in
Nice hits on that 6400. I'm going to be testing 3s on there 3800kv tomorrow. My club has a outlaw 1/10 class but no higher than 3s. You can use BSR 1/8 foams with prep. Iuse purple foams.
That’s sweet this motor is a beast and I have heard of that class before seems fun
@@RcFunDrizzy It is fun. Its harder on 3s to not get that spin so we use prep on BSR's
Nice test run cool set up
Appreciate it
Good hits, how come your b-link wasn’t working? Mine works out and about no issues. 💪🏾💯
Appreciate that Fam and it was working at first then it wouldn’t find the b link after but I’ll start taking a laptop for sure
So much power for 2s set-up. Everytime I test I learn something different.
Definitely is and same thing here every test you learn something thanks for tuning in appreciate it
Very nice bruh. 💪🏾
Appreciate that bro 💪🏽 thanks for tuning in 👊🏽
Practice awesome Perfect
You know it 💪🏽
Enjoy the weekend
Thanks and same to you enjoy
I like it
Truly appreciated
I use my b-link when I’m out is it not changing my setup when I’m out testing?
Mines was not sure why will have to figure it out
Try a 26 pinion and 81 spur change to 49000 end timing in cheat mode . Weather is bad here so I can't try it but I was running 2.5 with 25 / 75 but only getting 38000 rpm so I changed to the 26/ 81 . Have to wait for Wi weather to try it out. let us know how this works.
Not sure if they make a 81 for Traxxas which car are you running AE ?
@@RcFunDrizzy Yes Undercover Iceman DR10 conversion. with Exotec slipper eliminator . Well it is a 8.1 FDR ratio. I read that with that motor we should be looking at getting 49000 rpm (I know its a 75000 motor but thats what I read from the guy running 1.9s with it). I was at 22 degrees starting lower and plan to work my way up. Too cold and rain and snow in WI so I only got one day in so far testing.
@@PhilHenzig appreciate that I will be trying some tuning today and we will see
what body?
Are you running 2s or 3s
NPRC RUNS 2S LIPO WITH NO GYRO ASST OR A TSM. ANY SIZE ESC. 132FT.
As Wallace said 2s it’s the rules
Nice colors
Thanks