For my B650I motherhoard I was able to use a PNY 256GB 3.1 thumb drive that I converted to exFat because that was the only option. So is it 100% true you can only use FAT32 or is it a newer standard?
can you clear your new pc build before you've installed windows just by unplugging all the power from the board, waiting a while and then replugging the power connectors to the MB? I accidentally selected Integrated Graphics, and now can't get any video signal.
@@chrisbullock6477 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
My Asus Proart B550 is out for RMA and since Asus is taking too long to replace it I bought this board to keep the work going but I'm unable to install Windows on it. Basically, the Windows setup cannot format or delete the partition(s) on any of my drives (have tried 4), I get GPT/NTFS errors. By looking at tutorials I even tried diskpart but even that fails to format. Is there a certain BIOS setting that I might be missing, please suggest.
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels@@ritwiksondhi
My son messed about with his bios, no signs of life...I gathered all the required information, followed Mikes directions, and voila computer back in action, & this noob mum gained cred (for a day!) Thanks Mike
Thank you! This video just saved my butt bigtime!!!!! I have a Gigabyte B550m and I cannot get CSM to stay disabled for Secure Boot to be Active (Says Non Active) It said something about resetting Platform Keys.... DO NOT do that.... Board will NOT POST. This Qflash trick saved my butt. Loaded a drive and followed this video without pulling the board out. It worked! Thank you very much!
did it and it WORKED,before this i tried everything else you could possibly think of, cmos reset with the battery and the shorting the pins nothing and so many other things, THANK YOU SO MUCH!!
This was my first time doing a BIOS update in this manner, I've always done it the old school way. Gigabyte's site isn't all that descriptive in telling the full story in how to do it, this video helped a lot. I needed to get a B550M Aorus Elite ready for a 5800X3D, now she should be ready to sing.
BiOS updating is always a bit of a headache and can be scary for those doing this for the first time! Very thorough tutorial Mike! By the way I really like that MOBO!
@@mikesunboxing i have the same mobo, i just built my first computer using it and i love it, its really good for its price except it doesnt have built in wifi, but thats fine considering the price of the motherboard
For the second time on a build your video saved me a lot of frustration, I bought 2 used gigabyte motherboards off eBay and the ryzen 5 5500 CPU’s I bought wouldn’t work, I had laid all this out before hand and checked both boards and they both said new cpu detected so I proceeded to build. I immediately knew it was a bios issue, thanks once again and keep helping the pc community, I prefer asus boards but I got a good deal on these gigabyte boards, not used to flashing them.
Great video Mike and Lady Kath. Flashing the bios has always been my greatest fear and dreaded doing it. I usually flash it through Windows if I can. And I've been building computers since the mid 90's. Take care all. Cheers
Thank you, it worked. My board did not recognise my USB keyboard. It is rev 1.4 and i downloaded the files from 23 mar 2023, extracted those were only around 16 MB big, but it worked fine. Also the flash light went out but my psu kept running so I turned it off manually after waiting a while, then I was able to boot into bios using F2, thx again.
Thanks a lot! I left the cpu in because it was already mounted on my B550M DS3H AC. It worked fine but it did not turn off by itself after it was done.
Had a go trying this on PC I built that wouldn't post because I enabled XMP and it fixed it. Thanks have been frustrated trying to find a solution for a couple of hours
Interesting to see how different manufacturers handle the BIOS update function. The renaming the file part is what confuses many. The only downside about learning all of this is that I get to be the one to troubleshoot and repair the tech problems for family, co-workers and friends. It's a good thing that I enjoy it. Seems like that is a good motherboard as well. I am getting ready for a new build for the office as a web conferencing machine, and I believe I just found its motherboard. Being able to update BIOS even without a fully built platform is important. Thanks for sharing.
@@mikesunboxing hi great video. I did same procedure on a v 1.2 of mobo (i installed ram, cpu and gpu unfortunatelly) and after i press q flash i can't see lights....and it seems no update
@@sebastiedjuan7468 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
@@mikesunboxing problem was i press on on the pc:):) i didn't understood i have to q flash with the computer off:):) it works perfectly with AMD 5800 x3d and Msi 4090. Thank u for the great video
Thank u man i overclocked my ram and sfter that my pc didnt boot anymore even with cmos reset but this guy helped me alot to reinstall bios thank u man Gg
Can we get some backside PCB tests with a couple Ryzen 5000 series processors? Seems as the original version gets high VRM temps with a 3950x and I wonder if that still persists with the V2 model.
This is my first ever build, and my first ever time with a new motherboard. Just to be clear: the most recent BIOS is the better choice than the one listed for the CPU?
Is there any motherboard for AMD Ryzen CPU's that supports 4 M.2 SSD? I see that this MB supports 2 M.2 SSD's, but I wonder, is there a board that has a place for 4 M.2 SSD's?
I have a X870E AORUS PRO ICE and when im trying to download the latest bios, there's no latest rev. My mobo is rev 1.0 but theres only "show bios version" which is F1. Can i still download it without knowing the rev. This is for the 9800X3D.
Hi Mike thanks for the video. Sadly even after the update my build is not running. After I power on, the PSU fastly clicks 9 times and that's it. Nothing on the screen, no signs of life. Just funs spinning. The CPU is in the list of the supported ones, I tried everything, iteratively changing ram disconnecting the GPU, removing the hard drive, resetting CMOS and the latest try was the update. Every component is brand new and compatible with the motherboard. Have you ever experienced something like this? Could it be the motherboard is shorted somehow?
hello mike great video i just have a few questions im recently swapping from a i7 4790k to a ryzen 5600x but the mobo i have purchased is a GIGABYTE B550M DS3H an ive never flashed a drive before let alone swap a motherboard but im just curious if i need the autoexec.bat file on the flash drive to? as with mine is isnt in there but the other 3 are?
Had to look up your video been struggling with an exFAT drive and not a FAT32!! Confusion as I use the same 64GB exFAT usb for Asus bios updates fine but Gigabyte obviously need FAT32!
would the 1.3 rev support all cpus straight out of the box? when i checked to see what version I needed, it shows that all cpus require version FB. Version FB is the first release, so would i need to follow the steps in this video or would my cpu work if i just installed it without flashing the BIOS?
it will support all the cpus at that time, so newer ones might not be covered out of the box, but flashing is easy and gives performance and security updates
This is my current exact issue and identical components. I followed this procedure precisely, flashed my bios exactly as described in this video, and everything went to plan. Then I stuck the cpu back in and booted it up, but there's still no display. Something changed though. Now when the pc boots, after about 10 seconds it switches itself off, then after a other 5 seconds it switches itself back on, still no display, only now the power off button doesn't work, pressed or held. Any advice?
@@inkwyvern5171 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
@@mikesunboxing I already sorted it, thanks. I needed a graphics card plugged in and powered on before it would show a display. I'm used to installing them last not first.
hello Mike, the motherboard has finally arrived, it's exactly like the one in your video and the ryzen 7 5700x processor, now I don't know if I still need a bios update, is it rev 1.4? and for now I have 3000mhz cl 15 ram memories from the old PC, are those good too?
Hello Mike,one question? If someone have bad luck,like power went off during flashing bios (like you do on this video) or some error appear.Can he just try again or with other version of bios? Or no help after that?
Fantastic tutorial! But I have question. Can I flash the BIOS in the same motherboard (B550 gaming x v2) without removing RAM’s, ssd drive and gpu? Or is it nessesary to do?
@@mikesunboxing Thank you for the quick reply. I managed to properly Q-Flash+ thanks to your video. Was my first time and I had difficulty at first, kept calm and figured it out in the end. Still couldn't post. The ram was faulty XD. Brand new 5800X3D+4090 set up and ready to go now though!
I may have a kinda dumb question, does the bios usb slot function like any other usb slot when you are booted into windows ? Thanks for great video btw !
I have the same motherboard (rev 1.3) and I tried to Q flash it, it wouldn't turn on, neither the fans on the PSU nor the red blinking red. I tried to just put the CPU, RAM and GPU on, and surprise, it already had the right BIOS version (The one that supports Ryzen 5600 which is very new). So if you have a rev 1.3 motherboard, odds are, it's already flashed to support by default boards release before 14 november 2022 (also rev 1.3 has only two BIOS versions FB and FC, and they're on a a different page from the other revs)
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Thanks for the video. I followed the steps up until my pcu turned off after the update. Then I proceed to build the pc but it wouldn't even turn on!! I deassembled it again and tried a second update with no issues, but the pc still won't turn on after assembly. What could be the issue? I made sure to get the latest file for my mobo: Aorus x570 pro. Thanks!!
@@mikesunboxing thank you very much for your reply. I tried shorting the power pins on the mobo, but it still wont turn on after assembling the CPU and RAM only. I'm guessing its not a power issue since the PSU delivers power normally while the QFlash is underway. Could it be that the mobo is bricked somehow or the CPU is damaged by mistake?
@@guyhaddad6033 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
I followed everything as shown in the video but my board didn’t turn on the flash light after I press and hold the q-flash button. Does that mean my board is died? (Got this board 2 years ago but never open and use)
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
connected the 12V ATX and 24 PIn but my mainboard wont start, the Q-Flash LED is on but the Fans and RGB of them do not work, tested with another mainboard only 24Pin without hardware and it worked? whats the issue with this mainboard pls help sorry for bad english im tired came from work
Hello I have literally tried everything and nothing has worked I have q flashed plus my Mobo with the correct bios following this tutorial, I took out my cmos battery to reset the bios and my pc is Still just boot looping with no display
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
quick question, can i flash the bios while having everything installed (cpu,ram,gpu...) ? cause i'm planing on using a ryzen 5 5600 on this mobo and i'm unsure if i have to flash it or not.
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Hi! Great video! I only have one problem tho...Whatever I do, I cannot unzip the file to get it decompressed to the 32 GB. It always is around 16 GB and I followed exactly your steps. I am really lost at this point because I couldn´t find any helpful tips so far. :( Maybe you have an idea?
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
I've just had a horror weekend with my first build- a mix of naivety, ignorance and bad luck lol...Bought a MSI Pro B660M-G DDR4 and at the CPU stage of the buy opted for the better i3-13100F as it was only a tenner more than the 12100F...big big mistake it's turned out, yes it has LGA1700 but the BIOS is not able to detect the 13th gen, there's no USB Q-flash function so only way would be borrow(buy from CeX and return after use?!) a 12th Gen CPU to be able to update it...long story short I'm sending the board back and have bought a Z760 (arriving tomorrow), but as it's been out only since this year started is it worth updating the bios? there's only one minor looking update ?? This 760 at least has the Q-Flash Plus...live and learn I won't make that mistake again!!
@@mikesunboxing My apologies it's not a z760 it's a Gigabyte B760M DS3H DDR4 (Rev 1.0)... There's one BIOS update from 9 days ago but all I can see in it on the Gigabyte page is: 1/Checksum : 87B6 2/Address blank display while system powers up with RTX3060 series graphics cards 3/Add GIGABYTE PerfDrive support 2. deffo won't apply as I'm not going beyond 1660 Super, but do the others mean much? I looked into the files as far as I could but nothing jumped out at me? Forgot to thank you for putting this video together- the board arrived a couple of hours ago and I'm just not sure whether I do this or not... (Hint : I've already followed the steps and have it on a clean FAT32 formatted USB renamed "GIGABYTE.bin" (The online manuals show it all lower case?).... Confidence got a bit knocked putting it all together in the case and having to dismantle it all bar the front fans! WHat happens if there's a power cut doing it this way via USB-Q Flash, is it game over or could the process just be repeated?? TIA
@@mikesunboxing Hi Mike- I half chickened out and built the PC out the box to do the POST, all went fine, built it properly and all well ...when I got to the stage of ready for the OS I decided to do the F3 BIOS update and doing it from the screen felt a lot better than just doing it on a board out of the box with just flashing LED's for guidance!! It installed no problem- used a 16Gb USB3 stick, properly formatted, all good.... System is up and running perfect now, cheers fella!
Sir please answer me 😢 im pretty sure i have followed how you store the file into usb flash drive. The thing is when i do the flash bios as per this video, my usb cant be read. Do you think using a new usb can help?
@@mikesunboxing sir my sandisk just arrived used already but 20 sec later the flash led light disappears which means it cant still be read. i am 100% sure i followed your instruction 😢😢
When I try to do this, my pc turns on and then restarts. After I try shutting it down via the power button it keeps restarting so I have to cut all the electricity to the pc. There is no display on monitor and both keyboard and mouse dont work
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
hi please help. I’m new when it comes to pc building and I just finished building mine. When i powered the pc for the first time, i pressed del button once the prompt appeared and pressed Y after. Then I got into a screen with a message “boot failure detected” with a few options below such as “load optimized defaults then boot, load optimized defaults then reboot, enter bios”, i tried clicking and pressing enter but im stuck so idk what to do. do i have to do the same thing you did here? please advise. thanks btw my mobo is b650 aorus elite ax ice and my cpu is ryzen 5 7600
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Thanks for this video. I feel like such an idiot, but I was trying to Install 1.2 updates on a 1.3 motherboard. I'm glad I saw this video and checked, finally. Thanks again for posting this 👍🤓
Mine never started flashing it was just lit constantly for 30 min until i unplugged and turned it off. Im waiting on a gpu to finnish pc build but do you think my motherboard will be fine?
@@mikesunboxing I tried again and it just lit again. Then i built pc and tried with another usb and nothing happened. Then i tried with the first usb and it seemed like it worked. Still need gpu to arrive to know for sure
1. I did this because my pc stopped powering on after I turned on secure boot and disabled CSM, but I was doing it with my friend telling me what to do and I think a mistake was made. The flash drive was formatted as exFat because it is a 64gb flash drive and it was maybe too big, so when I hit the q flash button it flashed and then went a solid colour before turning off. Does this mean that the motherboard is bricked or could it be solved by trying again with a correctly formatted flash drive? Because pressing the q flash button afterwards (with the same flash drive but just re-downloaded the bios update file) didn’t result in any lights. 2. For future reference, if I already had windows installed and everything up and running, to update my bios could I just click on the windows auto exec file and it would finish pretty much without any interference from me?
sounds like you needed to reset the CMOS to the factory defaults rather than flash it. Secure and UEFI are the default setting for modern BIOS so you would still be in the same position if your hardware won't support uefi
@@mikesunboxingI looked up resetting the cmos and the tutorials were taking out the motherboard’s battery, which was one of the things I tried. It didn’t work though I did try it after attempting to flash the bios. Idk what else to do so I’ve just exchanged the motherboard for a new one and will not mess with bios until everything is up and running just to split up the process to make it more digestible
@@jackysbin3860 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Does this still work the same for 1.4 rev versions of the mother board? As on the website it doesn’t have f10 available as a download as I’m using the Ryzen 7 5800x
im so lost i have a Gigabyte B650 AORUS ELITE AX... i checked the list of bios updates it says F4,F5,F6,F7,F8a. then i go to the CPU support... and it has a list of all the newer ryzen CPUs but they all say F1. will it still work? i have a R7 7700X
Does it matter if I put a 3.1 flash drive into the 3.2 bios usb port on the motherboard?, because I used my 3.1 flash drive and it didn't work the bios flash only last for a minute
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels@@hay4let262
@@mikesunboxing just the '8000 series ready' as far as I can tell, you thinking of the same boards? the website pages have them identical. if so where are you seeing that?
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
@@mikesunboxing And another thing, on my aorus elite v2 for the r7 5700x i need F14 and i didn’t build the pc yet, can i do the same like you? And what to put? F17( the latest) or F14? I’m a bit scared that the latest bios will have bugs,if you can help me i’m gonna be so happy!🤝🏻
@@mikesunboxing No figured it out, there are different revisions for the board, the one i had was rev 1.3 so the bios update i was using was wrong and the board was rejecting it, got the correct one for rev1.3 and worked straight away
@@merishajder5966 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Hi Mike, loving your video's, this one will make my build easier later today :) wanted to ask, you've said above that the 5600x should be compatible out of the box, (albeit mine will be a 5600) but the BIOS version that supports it is F14, wouldn't it need to be in their F1 BIOS version? I'm torn between trying the BIOS update anyway to latest version using the usb q-flash, or go ahead and build the system and hope it's supported or that the board was made at a later date :) Cheers
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
![[LIVE] : ONE ลุมพินี 88 | คู่เอก "ป้อมเพชร vs อัสลามจอน"](http://i.ytimg.com/vi/1ZqTVVbMgbo/mqdefault.jpg)
Available from affiliate links:
Amazon Local: amzn.to/3BykAQw
Ebay UK: ebay.us/IzZcj1
Ebay US: ebay.us/vVV4HR
Ebay CA: ebay.us/nKjADP
Ebay AUS: ebay.us/EubzzC
RECOMMENDED USB DRIVE
Amazon Local: amzn.to/3v7P0H4
Ebay UK: ebay.us/nRoDca
Ebay US: ebay.us/P9yUZs
Ebay CA: ebay.us/LlI9lU
Ebay AUS: ebay.us/THwmCj
For my B650I motherhoard I was able to use a PNY 256GB 3.1 thumb drive that I converted to exFat because that was the only option. So is it 100% true you can only use FAT32 or is it a newer standard?
can you clear your new pc build before you've installed windows just by unplugging all the power from the board, waiting a while and then replugging the power connectors to the MB? I accidentally selected Integrated Graphics, and now can't get any video signal.
@@chrisbullock6477 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
My Asus Proart B550 is out for RMA and since Asus is taking too long to replace it I bought this board to keep the work going but I'm unable to install Windows on it. Basically, the Windows setup cannot format or delete the partition(s) on any of my drives (have tried 4), I get GPT/NTFS errors. By looking at tutorials I even tried diskpart but even that fails to format. Is there a certain BIOS setting that I might be missing, please suggest.
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels@@ritwiksondhi
My son messed about with his bios, no signs of life...I gathered all the required information, followed Mikes directions, and voila computer back in action, & this noob mum gained cred (for a day!) Thanks Mike
Brilliant glad to know that I helped and that everything is all ok now
Thank you! This video just saved my butt bigtime!!!!! I have a Gigabyte B550m and I cannot get CSM to stay disabled for Secure Boot to be Active (Says Non Active) It said something about resetting Platform Keys.... DO NOT do that.... Board will NOT POST. This Qflash trick saved my butt. Loaded a drive and followed this video without pulling the board out. It worked! Thank you very much!
glad it helped
Yeah I did this for valorant and now my pc won’t display do you think doing this will help me also?
did it and it WORKED,before this i tried everything else you could possibly think of, cmos reset with the battery and the shorting the pins nothing and so many other things, THANK YOU SO MUCH!!
This was my first time doing a BIOS update in this manner, I've always done it the old school way. Gigabyte's site isn't all that descriptive in telling the full story in how to do it, this video helped a lot. I needed to get a B550M Aorus Elite ready for a 5800X3D, now she should be ready to sing.
Nice work!
An update?
BiOS updating is always a bit of a headache and can be scary for those doing this for the first time! Very thorough tutorial Mike! By the way I really like that MOBO!
it is a nice board, no frills or gimmicks just a plain old fashioned well priced product
@@mikesunboxing i have the same mobo, i just built my first computer using it and i love it, its really good for its price except it doesnt have built in wifi, but thats fine considering the price of the motherboard
For the second time on a build your video saved me a lot of frustration, I bought 2 used gigabyte motherboards off eBay and the ryzen 5 5500 CPU’s I bought wouldn’t work, I had laid all this out before hand and checked both boards and they both said new cpu detected so I proceeded to build. I immediately knew it was a bios issue, thanks once again and keep helping the pc community, I prefer asus boards but I got a good deal on these gigabyte boards, not used to flashing them.
Glad I could help
Great video Mike and Lady Kath. Flashing the bios has always been my greatest fear and dreaded doing it. I usually flash it through Windows if I can. And I've been building computers since the mid 90's. Take care all. Cheers
yeah it is always something that makes time slow down like in a accident but there is nothing you can do to change the outcome
Thank you, it worked. My board did not recognise my USB keyboard.
It is rev 1.4 and i downloaded the files from 23 mar 2023, extracted those were only around 16 MB big, but it worked fine.
Also the flash light went out but my psu kept running so I turned it off manually after waiting a while, then I was able to boot into bios using F2, thx again.
Mine did not turn on the flash light and nothing happen after press and hold the q-flash plus button for few seconds what should i do?😢
Thanks for these refreshers Mike. BIOS is nervewracking at times and following these videos puts me at ease.
You can do it!
Brilliant budget board. I've recommended this purely because of the price and this specific feature. My friends are quite happy with this motherboard.
yeah can't go wrong at the moment with it
Thanks a lot! I left the cpu in because it was already mounted on my B550M DS3H AC. It worked fine but it did not turn off by itself after it was done.
Excellent advice Mike to put things together OUTSIDE the case first. For example, always test the PSU first, then proceed from there if it turns on.
Good point!
Had a go trying this on PC I built that wouldn't post because I enabled XMP and it fixed it. Thanks have been frustrated trying to find a solution for a couple of hours
Great video. Knew the motherboard would work but wasn’t quite sure how to go about it without another cpu. Very simple to follow and helpful!
Glad it helped!
Great instructional video Mike, thanks for sharing 🙂 Really like the look of that B550 Giga board.
it does look pretty decent and for the money right now you can't go wrong
@@mikesunboxing i buy a rtx 4090 and i don't know if can use on it
Interesting to see how different manufacturers handle the BIOS update function. The renaming the file part is what confuses many.
The only downside about learning all of this is that I get to be the one to troubleshoot and repair the tech problems for family, co-workers and friends. It's a good thing that I enjoy it.
Seems like that is a good motherboard as well. I am getting ready for a new build for the office as a web conferencing machine, and I believe I just found its motherboard. Being able to update BIOS even without a fully built platform is important. Thanks for sharing.
cheers mookie!
@@mikesunboxing hi great video. I did same procedure on a v 1.2 of mobo (i installed ram, cpu and gpu unfortunatelly) and after i press q flash i can't see lights....and it seems no update
@@sebastiedjuan7468 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
@@mikesunboxing problem was i press on on the pc:):) i didn't understood i have to q flash with the computer off:):) it works perfectly with AMD 5800 x3d and Msi 4090. Thank u for the great video
@@sebastiedjuan7468 Glad you figured it out 🙂
Mike's How to is Worthy of a Support comment. Like & a share 🙂
thanks William
Little late, but I still support the Support Comment.
@@PapaMav Thank's 😀
@@WilliamAndrewPhilipBodie you are welcome friend.
Going through this now, this video was exactly what i needed. Thank you so much
You got this!
Thank u man i overclocked my ram and sfter that my pc didnt boot anymore even with cmos reset but this guy helped me alot to reinstall bios thank u man Gg
glad to help
Thank you. Following your video step by step, flashing the new Bios was easy.
Glad it helped
Incredibly useful. Thanks. Definitely doing this since it's my first time moving from Intel to AMD
Glad it helped!
thanks for the vid same process for my A620I and did it with the 8500g and ram already installed :-)
Great 👍
Great tutorial on bios updating. Follow your steps and feel no pain lol Thanks for sharing Mike and Kath🐈👍
Thanks for watching!
Can we get some backside PCB tests with a couple Ryzen 5000 series processors? Seems as the original version gets high VRM temps with a 3950x and I wonder if that still persists with the V2 model.
i'll see what i can do
You have no idea how much i love you right now. Thanks!!!
thanks
Thank you very much this was what Inwas looking for but for b650e. Earned yourself a sub. Cheers
Thanks for the sub!
Thank you! It worked!
Although my PC kept working after it was done with BIOS, I had to gather some courage to shut it down, heh.
Great!
This is my first ever build, and my first ever time with a new motherboard. Just to be clear: the most recent BIOS is the better choice than the one listed for the CPU?
yes
might be buying this mobo for my new pc
good choice for a lot of people
nice about to get this mobo very helpful. have a 5600x but going to flash beforehand just to be up to date
Nice 👍
You are my hero ❤
Got it done the first time. Thanks
No problem 👍
Is there any motherboard for AMD Ryzen CPU's that supports 4 M.2 SSD? I see that this MB supports 2 M.2 SSD's, but I wonder, is there a board that has a place for 4 M.2 SSD's?
gigabyte aorus master and msi unify i think
@@mikesunboxing Thank you :)
I have a X870E AORUS PRO ICE and when im trying to download the latest bios, there's no latest rev. My mobo is rev 1.0 but theres only "show bios version" which is F1. Can i still download it without knowing the rev. This is for the 9800X3D.
the 9800x3d should work out of the box on x870e
@mikesunboxing YAY THANKS SO MUGU
Hi Mike thanks for the video. Sadly even after the update my build is not running. After I power on, the PSU fastly clicks 9 times and that's it. Nothing on the screen, no signs of life. Just funs spinning. The CPU is in the list of the supported ones, I tried everything, iteratively changing ram disconnecting the GPU, removing the hard drive, resetting CMOS and the latest try was the update. Every component is brand new and compatible with the motherboard. Have you ever experienced something like this? Could it be the motherboard is shorted somehow?
sounds like a short take it out of the case if it isn't already and try on the box
Marco,did you solve that problem you had?
merci mon ordinateur est réparé grâce à vous
Great video, thanks Mike.
Glad you enjoyed it
Right now, the newest bios is f19, should i download it for 5 5600X ?
yes use the newest one for patches and security updates
hello mike great video i just have a few questions im recently swapping from a i7 4790k to a ryzen 5600x but the mobo i have purchased is a GIGABYTE B550M DS3H an ive never flashed a drive before let alone swap a motherboard but im just curious if i need the autoexec.bat file on the flash drive to? as with mine is isnt in there but the other 3 are?
no it isn't needed.
if you need more help you can join our discord chat it's free
@@mikesunboxing thank you so much, motherboard will be delivered soon ram will be a few days after
Had to look up your video been struggling with an exFAT drive and not a FAT32!! Confusion as I use the same 64GB exFAT usb for Asus bios updates fine but Gigabyte obviously need FAT32!
Glad it helped Chris
would the 1.3 rev support all cpus straight out of the box? when i checked to see what version I needed, it shows that all cpus require version FB. Version FB is the first release, so would i need to follow the steps in this video or would my cpu work if i just installed it without flashing the BIOS?
it will support all the cpus at that time, so newer ones might not be covered out of the box, but flashing is easy and gives performance and security updates
This is my current exact issue and identical components. I followed this procedure precisely, flashed my bios exactly as described in this video, and everything went to plan. Then I stuck the cpu back in and booted it up, but there's still no display. Something changed though. Now when the pc boots, after about 10 seconds it switches itself off, then after a other 5 seconds it switches itself back on, still no display, only now the power off button doesn't work, pressed or held. Any advice?
hmm sounds like a short or overheat protection maybe?
@@mikesunboxing it was a temp issue yeah. Sorted that, still no display.
@@inkwyvern5171 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
@@mikesunboxing I already sorted it, thanks. I needed a graphics card plugged in and powered on before it would show a display. I'm used to installing them last not first.
@@inkwyvern5171 Glad you got it working 🙂
hello Mike, the motherboard has finally arrived, it's exactly like the one in your video and the ryzen 7 5700x processor, now I don't know if I still need a bios update, is it rev 1.4? and for now I have 3000mhz cl 15 ram memories from the old PC, are those good too?
that revision should be okay straight away
@@mikesunboxingdoes it mean that the bios update is no longer needed?
Hello Mike,one question?
If someone have bad luck,like power went off during flashing bios (like you do on this video) or some error appear.Can he just try again or with other version of bios? Or no help after that?
yes just try again
@@mikesunboxing Oh thats make life easier :) Thanks man!
Fantastic tutorial! But I have question. Can I flash the BIOS in the same motherboard (B550 gaming x v2) without removing RAM’s, ssd drive and gpu? Or is it nessesary to do?
should be fine as it is
Thank you for this video! I just purchased this board. Can I bios flash it with the CPU installed? Thanks for your answer.
Yes you can!
@@mikesunboxing Thank you for the quick reply. I managed to properly Q-Flash+ thanks to your video. Was my first time and I had difficulty at first, kept calm and figured it out in the end. Still couldn't post. The ram was faulty XD. Brand new 5800X3D+4090 set up and ready to go now though!
@@attilathehen4650 Glad we helped 🙂
Hey, can you tell me the difference between Q-Flash and Q-Flash Plus?
q flash plus is the button on the board, q flash is via the bios
@@mikesunboxing so I would need a supported CPU if my Mobo doesn't have q flash plus?
@@evergreatest7644 that is correct
I may have a kinda dumb question, does the bios usb slot function like any other usb slot when you are booted into windows ? Thanks for great video btw !
yes it does and thank you very much
I have the same motherboard (rev 1.3) and I tried to Q flash it, it wouldn't turn on, neither the fans on the PSU nor the red blinking red.
I tried to just put the CPU, RAM and GPU on, and surprise, it already had the right BIOS version (The one that supports Ryzen 5600 which is very new). So if you have a rev 1.3 motherboard, odds are, it's already flashed to support by default boards release before 14 november 2022 (also rev 1.3 has only two BIOS versions FB and FC, and they're on a a different page from the other revs)
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Thanks for the video. I followed the steps up until my pcu turned off after the update. Then I proceed to build the pc but it wouldn't even turn on!! I deassembled it again and tried a second update with no issues, but the pc still won't turn on after assembly.
What could be the issue? I made sure to get the latest file for my mobo: Aorus x570 pro.
Thanks!!
if it won't actually turn on that sounds like a power problem, either a short or a bad power switch maybe?
@@mikesunboxing thank you very much for your reply. I tried shorting the power pins on the mobo, but it still wont turn on after assembling the CPU and RAM only. I'm guessing its not a power issue since the PSU delivers power normally while the QFlash is underway. Could it be that the mobo is bricked somehow or the CPU is damaged by mistake?
@@guyhaddad6033 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Bro's a legend
thanks
I followed everything as shown in the video but my board didn’t turn on the flash light after I press and hold the q-flash button. Does that mean my board is died? (Got this board 2 years ago but never open and use)
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
connected the 12V ATX and 24 PIn but my mainboard wont start, the Q-Flash LED is on but the Fans and RGB of them do not work, tested with another mainboard only 24Pin without hardware and it worked? whats the issue with this mainboard pls help sorry for bad english im tired came from work
could be a short circuit on the board maybe? difficult to say without seeing it in action
Hello I have literally tried everything and nothing has worked I have q flashed plus my Mobo with the correct bios following this tutorial, I took out my cmos battery to reset the bios and my pc is Still just boot looping with no display
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
quick question, can i flash the bios while having everything installed (cpu,ram,gpu...) ? cause i'm planing on using a ryzen 5 5600 on this mobo and i'm unsure if i have to flash it or not.
That should work straight out of the box
@@mikesunboxing ok ty 👍
Hello i have the same motherboard but when i click the button for flashing not blinking at all not even once please help me....
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Hi! Great video! I only have one problem tho...Whatever I do, I cannot unzip the file to get it decompressed to the 32 GB. It always is around 16 GB and I followed exactly your steps. I am really lost at this point because I couldn´t find any helpful tips so far. :( Maybe you have an idea?
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Hey , can you please tell me what will happen of the flash the bios like this with CPU installed ? Will it work?
yes it should be fine
I've just had a horror weekend with my first build- a mix of naivety, ignorance and bad luck lol...Bought a MSI Pro B660M-G DDR4 and at the CPU stage of the buy opted for the better i3-13100F as it was only a tenner more than the 12100F...big big mistake it's turned out, yes it has LGA1700 but the BIOS is not able to detect the 13th gen, there's no USB Q-flash function so only way would be borrow(buy from CeX and return after use?!) a 12th Gen CPU to be able to update it...long story short I'm sending the board back and have bought a Z760 (arriving tomorrow), but as it's been out only since this year started is it worth updating the bios? there's only one minor looking update ?? This 760 at least has the Q-Flash Plus...live and learn I won't make that mistake again!!
the new board should be pretty up to date, but there is a security patch in the newer bios i believe so worth doing at some point if not straight away
@@mikesunboxing My apologies it's not a z760 it's a Gigabyte B760M DS3H DDR4 (Rev 1.0)... There's one BIOS update from 9 days ago but all I can see in it on the Gigabyte page is:
1/Checksum : 87B6
2/Address blank display while system powers up with RTX3060 series graphics cards
3/Add GIGABYTE PerfDrive support
2. deffo won't apply as I'm not going beyond 1660 Super, but do the others mean much? I looked into the files as far as I could but nothing jumped out at me?
Forgot to thank you for putting this video together- the board arrived a couple of hours ago and I'm just not sure whether I do this or not... (Hint : I've already followed the steps and have it on a clean FAT32 formatted USB renamed "GIGABYTE.bin" (The online manuals show it all lower case?).... Confidence got a bit knocked putting it all together in the case and having to dismantle it all bar the front fans! WHat happens if there's a power cut doing it this way via USB-Q Flash, is it game over or could the process just be repeated?? TIA
@@Bazza1968 do it you know it is done then, also having completed it your confidence should be fully restored
@@mikesunboxing Hi Mike- I half chickened out and built the PC out the box to do the POST, all went fine, built it properly and all well ...when I got to the stage of ready for the OS I decided to do the F3 BIOS update and doing it from the screen felt a lot better than just doing it on a board out of the box with just flashing LED's for guidance!! It installed no problem- used a 16Gb USB3 stick, properly formatted, all good.... System is up and running perfect now, cheers fella!
@@Bazza1968 Glad to hear 🙂
Sir please answer me 😢 im pretty sure i have followed how you store the file into usb flash drive. The thing is when i do the flash bios as per this video, my usb cant be read. Do you think using a new usb can help?
yes not all drives are compatible
@@mikesunboxing by the way, mine is B550m gigabyte ds3h. its the same procedure doing flash bios right?
@@mikesunboxing sir my sandisk just arrived used already but 20 sec later the flash led light disappears which means it cant still be read. i am 100% sure i followed your instruction 😢😢
can i use q flash using a 2.0 flash drive into a 3.2 usb qflash? thank you
Yes the ports are backwards compatible
When I try to do this, my pc turns on and then restarts. After I try shutting it down via the power button it keeps restarting so I have to cut all the electricity to the pc. There is no display on monitor and both keyboard and mouse dont work
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
hi please help. I’m new when it comes to pc building and I just finished building mine. When i powered the pc for the first time, i pressed del button once the prompt appeared and pressed Y after. Then I got into a screen with a message “boot failure detected” with a few options below such as “load optimized defaults then boot, load optimized defaults then reboot, enter bios”, i tried clicking and pressing enter but im stuck so idk what to do.
do i have to do the same thing you did here? please advise. thanks
btw my mobo is b650 aorus elite ax ice and my cpu is ryzen 5 7600
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
@@mikesunboxingthank you! i just joined the server
Thanks for this video. I feel like such an idiot, but I was trying to Install 1.2 updates on a 1.3 motherboard.
I'm glad I saw this video and checked, finally.
Thanks again for posting this 👍🤓
you won't be the first and definitely not the last
Mine never started flashing it was just lit constantly for 30 min until i unplugged and turned it off. Im waiting on a gpu to finnish pc build but do you think my motherboard will be fine?
not sure doesn't sound like the task started or finished im sorry to say
@@mikesunboxing I tried again and it just lit again. Then i built pc and tried with another usb and nothing happened. Then i tried with the first usb and it seemed like it worked. Still need gpu to arrive to know for sure
@@skalman5647 Fingers crossed 🙂
1. I did this because my pc stopped powering on after I turned on secure boot and disabled CSM, but I was doing it with my friend telling me what to do and I think a mistake was made. The flash drive was formatted as exFat because it is a 64gb flash drive and it was maybe too big, so when I hit the q flash button it flashed and then went a solid colour before turning off. Does this mean that the motherboard is bricked or could it be solved by trying again with a correctly formatted flash drive? Because pressing the q flash button afterwards (with the same flash drive but just re-downloaded the bios update file) didn’t result in any lights.
2. For future reference, if I already had windows installed and everything up and running, to update my bios could I just click on the windows auto exec file and it would finish pretty much without any interference from me?
sounds like you needed to reset the CMOS to the factory defaults rather than flash it. Secure and UEFI are the default setting for modern BIOS so you would still be in the same position if your hardware won't support uefi
@@mikesunboxingI looked up resetting the cmos and the tutorials were taking out the motherboard’s battery, which was one of the things I tried. It didn’t work though I did try it after attempting to flash the bios.
Idk what else to do so I’ve just exchanged the motherboard for a new one and will not mess with bios until everything is up and running just to split up the process to make it more digestible
@@jackysbin3860 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
What if the led doesnt flash at all? Power is definitely connected.
maybe a faulty board or short circuit, try the board outside of the case if it isn't already
Does this still work the same for 1.4 rev versions of the mother board? As on the website it doesn’t have f10 available as a download as I’m using the Ryzen 7 5800x
1.4 won't need an update it has the FB version installed that supports all AM4 chips out of the box
I cannot flash my B650m. Have tried q-flash, in bios and EFI flash. Nothing will take.
his name was robert paulson
@@mikesunboxing Only in death are we named.
If I Q-Flash this specific motherboard then will my ryzen 5 5600x work on this motherboard?
If you have the same board it won’t need the flash
@@mikesunboxing ok good, I have rev 1.3. does that matter or will I have to flash it?
@@raquelcarmona8133 that one will work with that CPU straight out of the box
@@mikesunboxingi bought rev 1.0 will it work with Ryzen 5 5600x without the bios update
im so lost i have a Gigabyte B650 AORUS ELITE AX... i checked the list of bios updates it says F4,F5,F6,F7,F8a. then i go to the CPU support... and it has a list of all the newer ryzen CPUs but they all say F1. will it still work? i have a R7 7700X
yes the 7700x was supported from the very first day. all newer bioses will have that support + more
@@mikesunboxing thank you! Just did it. Went smoothly.
@@n0xxm3rcyxx Glad it went well 🙂
Does it matter if I put a 3.1 flash drive into the 3.2 bios usb port on the motherboard?, because I used my 3.1 flash drive and it didn't work the bios flash only last for a minute
should be okay
@@mikesunboxing What should I do, if I have usb 2.0 stick, by something newer with 3.0 support? Because my B550m doesn't reply.
Hey mate i have Ryzen 5 5500,will i need to update bios on B550M Aorus Elite? I bricked my last motherboard a320m-k even though update went sucessful
depends which revision you get, most should be updated now unless it is quite old stock
Thank you
You're welcome
Can you Q flash without a button? my motherboard does not post but It did before BIOS update
no sorry
Pls helpni did everything but It does not turn the led on or the psu fan spins idk what to do
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
My bios led is not turning on everyting is pluged in and running I dont know what to do
is it in a case or on a test bed or box
hey on the website it says fb for all the supported cpu's because im on rev 1.4 does that mean my motherboard supports all of them or ?
if the FB version is the first bios for the board then it will cover all the CPUs listed as FB or FA out of the box
No puedo actualizar. Quizas es por que tengo todo con oc? Probare a poner todo de fabrica y probar ... No se come el archivo se bios no hay maner
hope you figure it out
@@mikesunboxing finally i can! The problem was i dont chose the correct versions of the bios. A few models similar for the v550 elite v2 🙈
@@HEXTOR1986 Glad you got it working 🙂
My led light starts flashing couple rimes after that it stays turned on and then it turns off and doesnt do anything anymkre what does that mean?
can't read the file, check which revision of the board you have and get the right bios file for that specific revision
@@mikesunboxing 1.3 i already have that file on the usb
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels@@hay4let262
what is the change with the V2 version?
new VRM and audio
@@mikesunboxing just the '8000 series ready' as far as I can tell, you thinking of the same boards? the website pages have them identical. if so where are you seeing that?
What if my data is 16 MB not 32 and when i plug it in it flashes for a while and then there is one big flash and the light go off is it ok?
The flash size should be the same unless it is a different model
@ if u look up the site and download it its should give me 32mb file right ? well its gives me 16 only idk
Help I did this and no lights turned on from the motherboard. There was a white flash and then nothing happened
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
I understand this video but I don’t understand the difference flashing speeds
it is the difference between reading and writing speeds visually
@@mikesunboxingbut like you said something about it goes at this speed the Q flash fails
Can u tell me what version:FB means?
in relation to what sorry?
@@mikesunboxing bios
How can I do it on rev 1.3 ? Because it is very different
yes same principle just a different bios file
If i get an 16gb usb can i format to FAT32?
yes you can
@@mikesunboxing And another thing, on my aorus elite v2 for the r7 5700x i need F14 and i didn’t build the pc yet, can i do the same like you? And what to put? F17( the latest) or F14? I’m a bit scared that the latest bios will have bugs,if you can help me i’m gonna be so happy!🤝🏻
what does it mean when the LED doesn't flash at all??
no power or a short circuit somewhere?
@@mikesunboxing No figured it out, there are different revisions for the board, the one i had was rev 1.3 so the bios update i was using was wrong and the board was rejecting it, got the correct one for rev1.3 and worked straight away
@@ReinKun Glad you figured it out and got it updated 🙂
would probably need it tomorrow.
I don't understand, I did everything right but my red light doesn't come on (I have the same motherboard
check you have the right board revision
@@mikesunboxing Yes I have it still doesn't work
@@merishajder5966 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Can i use a 32gb 3.2 usb?
yes you can
@mikesunboxing You're the best TY
Everytime i extract the file it doesnt show up the files that yours does
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Do I unplug the usb after?
yes you can do, or leave it there totally up to you
@@mikesunboxing appreciate the reply Thankyou for your help, great video too made it very simple as possible and clear😄👍🏼
@@MOTO-KOPI-YTGlad it helped 🙂
Terrible idea. The default settings on my mobo are gone
qflash installs a new bios and loads the new bios defaults, you mean it has changed your custom settings not the defaults
Do i need to update bios for 5600x ?
Anyone ?
no should be 5000 series ready
Hi Mike, loving your video's, this one will make my build easier later today :) wanted to ask, you've said above that the 5600x should be compatible out of the box, (albeit mine will be a 5600) but the BIOS version that supports it is F14, wouldn't it need to be in their F1 BIOS version? I'm torn between trying the BIOS update anyway to latest version using the usb q-flash, or go ahead and build the system and hope it's supported or that the board was made at a later date :) Cheers
Did everything in the video & it won’t q flash
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
O dont see my led pop up
How do you extract better!??
use windows built in extraction tool
I cant rename the bios , B550AORUSELITEV2
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
can i use a rtx 4090 on this mobo?
yes you can